Unable to extract all the records initial run(for Datasource 0HR_PY_1).

Hi All,
I was trying to extract the data using 0HR_PY_1 Data Source (HR-Payroll related). When I use Full update in BW, it extracts all the records from R/3 but when I use Init load to extract the data, it is not extracting all the records(some records are missing).
So I dont know what exactly is happening. I also checked RSA7 and deleted the entry for this data source (this entry was created because we tried to do some test delta in the past).
When I goto RSA3(Extractor Checker) and use update mode "F" (along with some selection criteria employee#284), it shows 550 records which is the correct number.But when I use the update mode "C"(Initialization of the delta transfer), I just get 490 records only.
So I am thinking is there anything I need to do to reset the initialization tables somewhere on r/3 side or do some kind of settings on r/3 by which I can extract all the records by using INIT load.

I noticed a weird thing in RSA3,
I tested this without any selection criteria.
Using "F" update mode, the total number of records were 173,654
Using "C" update mode, the total number of records were 176,205
So, even though I was getting less number of records by using "Full" update mode, I was able to see the latest data I wanted. But When I use "C" update mode, even though the number of records is more, still I could not see the latest data (6/2007)???
So dont know what exactly is happening!!

Similar Messages

I am not geting all the records in TCRT for a perticular sequnce number ?

Hi All,
I not geting all the recotrds in TCRT table what ever the records i can see in transaction : PC_PARESULT for a perticular employee of perticular sequence neumber.
My code is like this : for the cumyr = '2008' i am geting values but cumyr = '2007' i am not geting values . But actually records exist for that condition as i see through PA_PCRESULT.
cd-key-pernr = pernr-pernr.
rp-imp-c2-cu.
SORT rgdir BY paydt DESCENDING.
LOOP AT rgdir.
CHECK: rgdir-paydt BETWEEN p_detryr_low AND
                               p_detryr_high,
    rx-key-pernr = cd-key-pernr.
    UNPACK rgdir-seqnr TO rx-key-seqno.
    rp-imp-c2-ru.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
LOOP AT tcrt WHERE lgart = '/303' AND
                         ctype = 'Y' AND
                         taxau = 'FED' AND
                         cumyr = '2008'.
    v_betrg 1= v_betrg + tcrt-betrg.
ENDLOOP.
LOOP AT tcrt WHERE lgart = '/303' AND
                         ctype = 'Y' AND
                         taxau = 'FED' AND
                         cumyr = '2007'.
    v_betrg 2 = v_betrg + tcrt-betrg.
ENDLOOP.
     Thanks ,
Suresh.

You may not expressly be using all the RAM in your machine but OS X will, whether you know it or not.
Each time you read a file from disk, whatever was read is cached by the system; when the file or program is no longer in use, the memory is marked free for the system to recover for other purposes but as long as it remains in memory the next time you need to access that disk information it's simply read from memory.
The more RAM, the more disk data is kept around and the faster your machine will operate until that memory needs to be recovered or you reboot (or otherwise flush the disk cache.)

Unable to extract all the currencies using Task Flow

Hi Everyone,
I have 60 currencies that I extract using a Task Flow in HFM 11.1.2.1 to a SQL table, I only receive 59 of those currencies FX Rates in the SQL table. The CNY currency does not extract at all.
I have tried changing the PoV around with no success. I don't think it is the PoV anyway because the other 59 currencies have no problem.
Any inputs please...
Regards,
Vinod

Sounds like this is using an EA extract process. In your Task Flow, can you extract just that one (CNY) currency? If you do this directly in Extended Analytics, is the output any different from the Task Flow? How about if you extract to a text file rather than SQL?

How to fetch all the records from ztable

Hi
My program is outbound program.
According to the requirement i have to fetch all the records from ztable which are not tranmitted before to the third party and once the records are extracted and written to output file they will be marked as 'X' in the "status" field of that ztable for the next days run.
How to fetch the records.Please suggest me.
Thanks,
Neelima

HI,
Fetch all the records whose status is equal to 'X' as whatever data is sent to third party system is marked as 'X' in status field of table after sending.
You need to first fetch the data into internal table using the select statement where status EQ space. You get the data which is not yet transmitted to third part. And later in the program after trasmitting the data to third party modify the Records in the DB table which are transmitted with Staus eq 'X'.

How can i get all the records from three tables(not common records)

Hi
I have four base tables at R/3-Side. And i need to extract them from R/3-Side.
And i dont have any standard extractor for these tables .
If i create a 'View' on top of these tables. Then it will give only commom records among the three tables.
But i want all the records from three base tables (not only common).
So how can i get the all records from three tables. please let me know
kumar

You can create separate 3 datasources for three tables and extract data to BW. There you can implement business login to build relation between this data.

Trying to retrieve all the records from the file on desktop

HI All
I have one particular problem. I was given a text file which as 7000 records with length 512 each in a continues string. I Changed begining of each record with comma in that text and saved it in .csv , when I try to upload the file into my program's internal table.
It is still giving one record. I used
itab_EXTRACT1 declared as
DATA: begin of itab_extract OCCURS 0,
        extract1(512) type c,
      end of itab_extract.
call method cl_gui_frontend_services => gui_upload
    exporting
      filename                = Xfile
    filetype                    = 'ASC'
     has_field_separator     = 'X'
    changing
      data_tab                = itab_EXTRACT1
exceptions
    others                  = 17.
Is there a way how to retrieve all the records into the internal table.
Thanks
Ravi

Hi Ravi,
I don't know if this is the correct solution, but I think it will work.
Declare your internal table (itab_extract) with the maximum length which your file will occupy.
Create another internal table (itab) with field (text) length 512.
Populate the internal table itab_extract using GUI_UPLOAD.
Then write this code
l_index = 1.
itab-text = itab_extract-extract1+0(512).
append itab.
do.
n = ( l_index * 512 ) + 1.
itab-text = itab_extract-extract1+n(512).
append itab.
if ( itab-text is initial ).
exit.
endif.
enddo.
Let me know if I miss anything.

Request is active after all the records loaded

Dear Experts,
I am extracting data from R/3 through custom Data source. While creating data source, I used custom Function Module.
I have checked in RSA3, 9565 Records are available.
When I start extract from BW side all the records (9565) fetched, but request still in yellow. Same way I have checked in R/3 side in SM37 job status is Active (After 5 Hours also).
Please provide the solution.
Thanks in Advance.
Regards,
Selva

hi,
in the monitor screen select that requestselect refresh request for 1 more 2 minutes. otherwise come out the screenwait for some time-go to that request check it out.
select your requestselect details tabsee error.
if helpful provide reward points
regards
harikrishna N

HI,I am unable to see all the tabs in ACC, getting the following error

I am unable to see all the tabs in ACC, getting the following error.
ERROR [ComponentAgent] Request for URL:
http://sathya-PC:8080/dyn/init-session did not return a valid session.
Please check your settings for siteHttpServerName, siteHttpServerPort,
webApplicationPrefix and initSessionURL for component
/atg/devtools/DevSessionManager/_2/atg/devtools/ComponentAgent
serverport : 8860
servername : localhost
Note:I included DCS in Manifest and Run the DCS in SQL
Please Help me out from this issue
Thanks

Verify and chage if required.
Ports are configure at /atg/dynamo/Configuration component,
httpPort , httpsPort , drpPort , fileDeploymentPort , rmiPort , fileSychronizationDeploymentPort , adminPort , siteHttpServerPort
Noramly :
siteHttpServerPort and adminPort: app server port
Thanks,
Nitin.

Application view loading all the records on view

Hello,
We have a customization navigating from JTT pages to opening a OA Frame work page, occassionally user reporting the target "OA Framework page" hungs, and poor response from application. We noticed in EBS -> Poolmonitor VO is trying to load all the records from the table, unable to reproduce this scenario.
Why application loosing request parameters?
Any help is appreciated, thanks in advance.
Pullarao.

Hello,
We have a customization navigating from JTT pages to opening a OA Frame work page, occassionally user reporting the target "OA Framework page" hungs, and poor response from application. We noticed in EBS -> Poolmonitor VO is trying to load all the records from the table, unable to reproduce this scenario.
Why application loosing request parameters?
Any help is appreciated, thanks in advance.
Pullarao.

Periodic Alert-How to send all the records returned from the SQL in a mail?

Hello all,
I have defined a Periodic Alert, my SQL query returns more than one record whenever I run it. I also defined an action to send an email with the message consisting of the output variables from the SQL. Whenever i run this alert, a mail is being sent for every single record returned from the query. But i want to send a single mail containing all the records information that my SQL query returns.
For Example: My SQL query lists all the users created on current date.
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
Now i want to send a mail with all the users information from the above query, to SYSADMIN. How can this be achieved?
Thanks & Regards
chakoo

Hi Chakoo,
If the Periodic Alert is not working as requried. You can write a simple package with 3 procedures to implement the writing output to a out file and simultaneuosly send email to multiple receiptents.
Example:
Create Package xx_pac
Create public Procedure P1
begin
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
fnd_file.put_line (fnd_file.output, &OUTPUT1, &OUTPUT2);
end;
(Create private Procedure P2
begin
---Write the email package using the UTL_SMTP approch. Using this approch you can send the procedure P1 output file as an attachment to the desiginated receiptents.
end;
(Create public Procedure P3
begin
---call the procedure P1 using the "g_request_id = fnd_request.submit_request"
---Wait for the above procedure to complete using "l_conc_status := fnd_concurrent.wait_for_request" procedure.
---call the procedure P2. (When called you must provide the correct to, from address)
end;
end;
Register the Package xx_pac as a concurrent program and schedule when submit it from the request.
Regards
Arun Rathod

Database adapter not returning all the records

I've taken over a BPEL from a developer who left the organization and have been having an issue during our User Acceptance Testing. We are querying a table that will return the insurance enrollment information for employee's and their dependants. When an employee change plans, or adds people, the old plan is terminated and a new once is created. When this happens there will be two records on the database to show the old plan and the new plan.
When we run the SQL thru JDEV or SQLDeveloper, the data comes out fine. When we run it through a BPEL Database Adapter we are only getting one of the rows returned.
I have created a small tester BPEL that is easily modified and deployed to run the same query to try multiple configurations changes within the DBAdapter. What I have found is all the records are returned when the "Return single result set" box on the DBAdapter Wizard is unchecked. When it's checked then it only returns one record for the employees with an old and a new plan.
Can someone explain what the "Return single result set" option does, and what the impact will be if it's unchecked?

Hello,
In same way i am using two parent-child(header-line) tables. they have one to many relationship.
I want to generate XML which contains multiple line items under a child elements for header elements.
I have tried it but i am getting only one line under that child item. i am using jdev10.0.3.3.0
can u help me please.
-regards
satyendra

Vertical scrollbar not showing all the records when I scroll down.

Vertical scrollbar not showing all the records when I scroll down.
Using Oracle forms 10g , operating system windows
I have two fields with number of items dispayed = 15.
I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
Here are the properties for block / scrollbar.
WORK_CATEGORY
- Subclass Information
- Comments
* Navigation Style                                Same Record
- Previous Navigation Data Block
- Next Navigation Data Block
- Current Record Visual Attribute Group
- Query Array Size                                0
- Number of Records Buffered                      0
* Number of Records Displayed                     60
* Query All Records                               No
- Record Orientation                              Vertical
* Single Record                                   No
- Database Data Block                             Yes
- Enforce Primary Key                             No
- Query Allowed                                   Yes
- Query Data Source Type                          Table
* Query Data Source Name                          WORK_CATEGORY
* Query Data Source Columns
* Column Name                                   JOB_TYPE
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
* Column Name                                   WORK_CATEGORY
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
- Query Data Source Arguments
- Alias
- Include REF Item                                No
* WHERE Clause
* ORDER BY Clause                                 job_type
- Optimizer Hint
- Insert Allowed                                  Yes
- Update Allowed                                  Yes
- Locking Mode                                    Automatic
- Delete Allowed                                  Yes
- Key Mode                                        Automatic
- Update Changed Columns Only                     No
- Enforce Column Security                         No
- Maximum Query Time                              0
* Maximum Records Fetched                         0
- DML Data Target Type                            Table
- DML Data Target Name
- Insert Procedure Name
- Insert Procedure Result Set Columns
- Insert Procedure Arguments
- Update Procedure Name
- Update Procedure Result Set Columns
- Update Procedure Arguments
   Don't know where am I going wrong. I'll really appreciate if you can help me in this.
Thanks.
Edited by: 831050 on Sep 14, 2011 8:05 AM

One of the items is a list item.. here are it's properties:
* Name                                          JOB_TYPE
* Item Type                                     List Item
- Subclass Information
- Comments
- Help Book Topic
- Enabled                                       Yes
* Elements in List
* Label
* List Item Value                             LIST20
* List Style                                    Combo Box
- Mapping of Other Values
- Implementation Class
- Case Restriction                              Mixed
- Popup Menu
- Keyboard Navigable                            Yes
- Mouse Navigate                                Yes
- Previous Navigation Item
- Next Navigation Item
- Data Type                                     Char
- Data Length Semantics                         Null
- Maximum Length                                30
- Initial Value
* Required                                      Yes
* Copy Value from Item
- Synchronize with Item
- Calculation Mode                              None
- Formula
- Summary Function                              None
- Summarized Block
- Summarized Item
- Current Record Visual Attribute Group
- Distance Between Records                      0
* Number of Items Displayed                     15
- Database Item                                 Yes
* Column Name                                   JOB_TYPE
- Primary Key                                   No
- Query Only                                    No
- Query Allowed                                 Yes
- Insert Allowed                                Yes
- Update Allowed                                Yes
- Update Only if NULL                           No
- Visible                                       Yes
* Canvas                                        CANVAS2
- Tab Page
* X Position                                    47
* Y Position                                    137
* Width                                         187
* Height                                        18
- Visual Attribute Group                        DEFAULT
- Prompt Visual Attribute Group                 DEFAULT
- Foreground Color
* Background Color                              white
- Fill Pattern
- Font
* Font Name                                     Tahoma
* Font Size                                     10
* Font Weight                                   Demilight
* Font Style                                    Plain
* Font Spacing                                  Normal
* Prompt                                        Job Type
- Prompt Display Style                          First Record
* Prompt Justification                          Start
* Prompt Attachment Edge                        Top
- Prompt Alignment                              Start
* Prompt Attachment Offset                      10
* Prompt Alignment Offset                       0
- Prompt Reading Order                          Default
- Prompt Foreground Color
- Prompt Font
* Prompt Font Name                              Tahoma
* Prompt Font Size                              10
* Prompt Font Weight                            Bold
* Prompt Font Style                             Plain
* Prompt Font Spacing                           Normal
- Hint
- Display Hint Automatically                    No
- Tooltip
- Tooltip Visual Attribute Group
- Direction                                     Default
- Initial Keyboard State                        Default
- Keyboard State                                Any

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..

Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..

It would be nice if you told others the steps you've tried and/or how you used to have your setup.
Anyway have you tried tapping MORE this will then bring you to
the selection-list of Audiobooks, Genres, Compilations & Composers.
Selecting Genres gives you a list of all your music split into genres which was set within the Music downloaded via iTunes or uploaded from CD or which you may have set yourself.
Then you just select the Genre you want:
If certent songs are not correctly gategorised you may need to go into iTunes and reselect via Get-info
>Info>Genre and change it there. That way you should end up with all songs of Jazz or other in 1 place.

Unable to extract all the records initial run(for Datasource 0HR_PY_1).

Similar Messages

Maybe you are looking for