Unable to find phone type in CUCM for manual registration

Hi
We are using CUCM 8.0.3 , unable to find Phone type Cisco 8831 for manual registration. How can I add this phone type to CUCM ? Any help is appreciated.

Hi there,
+5 to my friends Mahmood & Nadeem here for their good ideas.
The problem here is that there is no Device Pack for CUCM 8.0.3 that supports the 8831 :( The ReadMe below is for the last/latest 8.0.3 device pack;
http://www.cisco.com/web/software/282074299/92918/cmterm-devicepack-8_0_3_24051-1_Readme.pdf
You would need to upgrade CUCM to a minimum of 8.5.1 and then install ;
Cisco Unified Communications Manager 8.5(1.17118-1) Device Package - Compatible UCM Version: 8.5
cmterm-devicepack8.5.1.17121-1.cop.sgn
Cheers!
Rob

Similar Messages

Java.io.IOException: unable to find the type mapping resource file

Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Unable to Find the Type Mapping Resource File (Two web services)

Hello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luis

Hello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luis

Unable to find any active legal regulations for determination proc. "TEST1"

Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
Carl

Hi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl

Newfs error: "Unable to find Media type. Proceeding with system determined"

Hi,
I have the Solaris 10 update 6 installed on one server:
bash-3.00# more /etc/release
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008
bash-3.00#
I have noticed that if I run command newfs, I get the following error: "Unable to find Media type. Proceeding with system determined parameters."
bash-3.00# newfs /dev/md/rdsk/d100
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d100 last mounted as /export
newfs: construct a new file system /dev/md/rdsk/d100: (y/n)? y
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
/dev/md/dsk/d100 is mounted, can't mkfs
bash-3.00#
What does this error mean? It did not occurr in earlier versions of Solaris. Can it be ignored or maybe the syntax for newfs has changed and I am doing something incorrectly?
Thanks,
Przemek

[natural weight loss diet|http://www.goarticles.com/cgi-bin/showa.cgi?C=1633072]
[confessions of a lazy super affiliate|http://www.squidoo.com/lazysuperaffiliate-reviewdetails]
[how to stop panic attacks|http://simple-fix.blogspot.com/2009/04/how-to-stop-panic-attacks-permanently.html]
[Acer AS4530-6823|http://www.goarticles.com/cgi-bin/showa.cgi?C=1638379]
Anwar [http://healthy-weight-loss-plan.info/about/index.html]

Finding output type and form for the transaction

hi all,
 i have a problem finding output type and form for the transaction j1iv .actually i need to find the standard output type and form name for the transaction j1iv. how can we do it.

Hi Abinash,
 Go through the following steps.
 1 . Go to the transaction NACE.
 2. You will be able to see the Application and description tab over
 there. Select the Application for which you need the output type.
 3. After selecting the Application..on the top you can see the tab--
 output types...click in that..here you will be able to see all the output
 types for that application.
 4. Now select a output type ..and on the left side u will be able to see
 the tab for processing routines...double click on it...
 5. Here you will be able to see the standard SAP program...the form
 routine...the form..attached to it..
 Please Reward..if helpful..
Regards,
Himanshu.

Unable to find the default new form for list mylist1 - deploying the list instance via module feature

hi,
am facing a problem deploying a list instance via a feature,
I created the list in the UI with content and views.
Exported the site template as WSP.
Imported into Visual Studio the list instance, pages module and property bags.
Copied into my new solution.
Deploy list instance as a site-collection level scoped feature.
activated the below features :
mylist_ModulesFeature
mylist_ListInstancesFeature
mylist_PropertyBagFeature
List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
can anyone pls help why i am getting this error ?

try these links:
http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful

Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit

Hi
Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit machine.
Please provide the dowload links.
Thanks

Please follow this link for download and set requirements for installation of WebLogic 10.3 for Win 2008 Server 64bits:
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs/windows2008/win2008_103.html
best regards,
Thiago Leôncio

Unable to create wage types in It0015 for Zambia

Hi Friends,
I want to create Wage types in IT0015 - Additional Payments for Zambia. But I am unable to find any model wage types which can be copied to create the custome wage type for country grouping ZM - Zambia.
I also tried to copy the wage typse by using the functionality "copy between country groupings" but I am unable to find Zambia in the country groupings drop down list.
Can someone pls help asap. Its an urgent client requirement.
Bye
Naveen

Hello All,
Thanks to all of you for trying to solve my problem but at last the solution was very easy which I could find myself.
There is a custome table T500L_CUST in which I can configure Zambia country grouping and accordingly create a wage type catalog for Zambia by copying the wage types from other countries 99 or in that matter any country.
Let me know if anyone has any doubt in this.
Bye
Naveen

Unable to find Bean and AM impl for customisation of Fusion Application

Hi,
Iam navigating through this link
under Fusion App --> Navigator -->WarehouseOperation -->REceipts --> and Entering createReceipt screen via Receive Expected Shipments. I want to default the value of packing slip as how supplier got defaulted but in editable mode. For this i want to know how supplier got defaulted and in same way i want to default Packing slip number.
But iam unable to find the managed bean or AMimpl java file for doing code change.
"Copylines" is default activity and from there it is navigating to CreateReceipt.jsff, i don't find any parameter carrying the value for Supplier.
So Logic must be either in Managed Bean or in AmImpl . I need to include my logic also here. But unable to find the necessary file.
reg,
Lakshmi.

While creating a receipt, you select one or more orders belonging to a single supplier and then create one receipt against that. And that is how the supplier field gets defaulted in the Create Receipt UI.
Packing slip is also defaulted when the user receives against ASN provided it is captured at the time of creation of the ASN.
For a regular PO receipt, the user is expected to enter the packing slip by default.
Can you describe your exact requirement in detail?
The customization framework does allow the value of a field to be overwritten but using this, you will always have a predefined value or some limited logic using EL.
But we would not recommend that because when you customize the value of a field, it will discard the value that is fetched from the database.
This can potentially break the default functionality of receiving where the packing slip is defaulted from the ASN.
And another question that I have is the need for the AM details - this particular code is present in the AM and not the managed bean.
Are you planning to extend the AM that is shipped by receiving?

Where did strikethrough go? unable to find strikethrough button on Pages for ipad in version1.5, HELP!

unable to find strikethrough button S on Pages for ipad in version1.5, HELP!
look! and what's that dot thing?

The following query runs for 10 mins on tbl with 1 mill records on sql server 2012 RTM, and for 1.5 min on sql server 2012 build 3128.
Significant differences in duration are usually due to different plans. As Olaf suggested, comparing the plans is a good first step. Assuming the plans are different, I wouldn't be too quick to assume the difference is related to the software
build. Different plans are often due to differences in the row count estimates used to generate the plan so make sure the same indexes and statistics exist in the databases and that stats are fully up-to-date.
What is the purpose of the WHERE clause? It seems to me it will return all rows anyway.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Error: Unable to find the WSDL port defined for Service

Hi,
I am facing below error while invoking partner's WSDL:
Oracle.Fabric.Common.FabricInvocationException: Unable to find WSDL port defined for the service.
Can anybody guide me what could be the exact issue?
* I am able to ping that host.
Thanks
Richa

Hi Puneet,
I am able to access WSDL from the browser and value of Location in composite.xml is correct.
Regards.

Unable to find skype in app store for Mac Pro

unable to find skype on Mac pro App store.

For App Store queries post here:
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

Unable to find SWCV in BW system for inbound proxy

Hello Friends,
There is one interface running in our system. It is FILE to PROXY. Every day MDM sends some vendor details in files form. PI polls the file and map to structure for BW. (BW is SAP System).
In Operation Mapping, Sender Side : Our own interface and structure is used. On the Receiver side, 'GenericVendorIN' interface from SAP SWCV 'BI CONT' is used.
Messages are processed successfully for this interface in PI (PI 7.1) and failed in BW side due to application error. Not all messages, few messages.
When we try to troubleshoot the business logic (ABAP) written for this inbound interface in BW system, this SWCV BI CONT is not displayed in SPROXY transaction. But, we see successful messages and failure messages in BW system. (Txn: SXMB_MONI). ESR is connecting fine. Our SWCV is adisplayed correctly.
Friends, could you please clarify why SAP Standard SWCV BI CONT is not displayed in SPROXY transaction? For any errors, how do we troubleshoot then on the inbound side i.e in BW system.
Thanking you.
Kind regards,
Jegathees P.

hi,
In BW, check in tx SXMB_ADM, option Integration Engine configuration, if you have in category RUNTIME, parameter IS_URL something like that "dest://<NameOfYourRfcDestination>".
and in SM59 (of BW), check that you have the same RFC destination (type H).
or maybe you use a Java proxy, instead of an abap proxy.
regards.
Mickael

Unable to find Message Type in PFAL

Hi Experts,
In SAP HR system, I am not able to see my Message Type in PFAL transaction.
Steps followed :-
1. I copied standard HRMD_A07 basic type to a Z basic type; Inserted some Z segments into it using transaction we30
2. I created a Z message type in transaction we81.
3. Linked that Z Message Type to Z basic type in we82.
4. Created a distribution model for that Z message type in bd64.
5. Now in PFAL transaction, for sending Employee master data; I need to select the Z Message type that I created but I am not able to see that message type in F4 help.
I can see other Z Message types in F4 help in PFAL but the Message type that I have just created is not visible there.
Can anyone please help?
Regards,
Varun

Hi Manas,
We don't want to send all the segments outside HR system; that's why we are reducing the structure of IDOC by creating a new IDOC type.
I think we need to make an entry in some table from where PFAL picks the Message type name but not sure about the table name.
Regards,
Varun

Unable to find phone type in CUCM for manual registration

Similar Messages

Maybe you are looking for