Unable to get it to start right away using the shortcut

Once closed, it is difficult getting it to start again. The cursor shows active for a couple of seconds then stops and the program does not start. Then about 2 minutes later it starts up on its own. ???

I downloaded Firefox 13, however when I tried to open the Firefox application an error message came up, "You can't open this application "firefox" because it is not supported on this arcitecture".
That is a clear indication you do not have the required Intel processor.
There is no way to upgrade you current computer to be compatible with Netflix streaming.

Similar Messages

Firefox has slow start up & I have the latest version. IE, Chrome, AOL start right away. Firefox takes up to 10 minutes.

Firefox has slow start up & I have the latest version. IE, Chrome, AOL start right away. Firefox takes up to 10 minutes.
== This happened ==
Every time Firefox opened
== when updated to 3.6

You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded. How do I get it to start playing again before the rental expires?

The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded. How do I get it to start playing again before the rental expires?

Hello zooeyme,
I'd suggest reporting the issue to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

Have just purchased Lion and unable to get to store to download. Using iMac OS10.6.8

Have just purchased Lion, have Redemption code, etc, but unable to get to place to download. Using OS 10.6.8

Follow the instructions that came with the redemption code. If you are, provide details on what's happening where, including any messages. Alternatively, contact http://www.apple.com/support/mac/app-store/contact/ since they're responsible for making this work.
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), SL & ML, G4 450 MP w/Leopard, 9.2.2

ORA-30926: unable to get a stable set of rows in the source tables

hi,
I am loading data from source table to target table in a interface.
Using LKM incremental update .
In the merge rows step , getting the below error.
30926 : 99999 : java.sql.SQLException: ORA-30926: unable to get a stable set of rows in the source tables
please help as what should be done to resolve this.

Below is the query in the merge step...
when i run from SQL also, same error
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause:    A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action:   Remove any non-deterministic where clauses and reissue the dml.
merge into     TFR.INVENTORIES T
using     TFR.I$_INVENTORIES S
on     (
          T.ORGANIZATION_ID=S.ORGANIZATION_ID
     and          T.ITEM_ID=S.ITEM_ID
when matched
then update set
     T.ITEM_TYPE     = S.ITEM_TYPE,
     T.SEGMENT1     = S.SEGMENT1,
     T.DESCRIPTION     = S.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT     = S.LIST_PRICE_PER_UNIT,
     T.CREATED_BY     = S.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE     = S.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG     = S.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY     = S.LAST_UPDATED_BY
     ,T.ID     = TFR.INVENTORIES_SEQ.NEXTVAL,
     T.CREATION_DATE     = CURRENT_DATE,
     T.LAST_UPDATE_DATE     = CURRENT_DATE
when not matched
then insert
     T.ORGANIZATION_ID,
     T.ITEM_ID,
     T.ITEM_TYPE,
     T.SEGMENT1,
     T.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT,
     T.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY
     ,T.ID,
     T.CREATION_DATE,
     T.LAST_UPDATE_DATE
values
     S.ORGANIZATION_ID,
     S.ITEM_ID,
     S.ITEM_TYPE,
     S.SEGMENT1,
     S.DESCRIPTION,
     S.LIST_PRICE_PER_UNIT,
     S.CREATED_BY,
     S.DEFAULT_SO_SOURCE_TYPE,
     S.MATERIAL_BILLABLE_FLAG,
     S.LAST_UPDATED_BY
     ,TFR.INVENTORIES_SEQ.NEXTVAL,
     CURRENT_DATE,
     CURRENT_DATE
     )

MERGE error : unable to get a stable set of rows in the source tables

Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
Annie

Annie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
    select columns_you_need
    from (
        select ftp.columns -- whatever they are
               , int2.columns
               , row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
        from   ftp
        left join int int2
        on (the condition you used in your query)
    where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel

ORA-30926: unable to get a stable set of rows in the source table

When user are trying to open a form getting below error.
com.retek.platform.exception.RetekUnknownSystemException:ORA-30926: unable to get a stable set of rows in the source tables
Please advice
Edited by: user13382934 on Jul 9, 2011 1:32 PM

Please try this
create table UPDTE_DEFERRED_MAILING_RECORDS nologging as
SELECT distinct a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
a.drank,
c.CONTACT_CD,
c.NEW_CUST_CD,
a.DM_ROW_ID
FROM (SELECT a.ROWID AS DM_ROW_ID,
a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
dense_rank() over(PARTITION BY a.CUST_ID, a.EMP_ID ORDER
BY a.PURCHASE_DATE DESC, a.ROWID) DRANK
FROM deferred_mailing a) a,
customer c
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
and a.drank=1;
The query you've posted is behaving according to the expectations. The inner select is returning one row and the outer is returning two as the
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
conditions are seeing two rows in the table customer.
I've added the a.drank=1 clause to skip the duplicates from the inner table and distinct in the final result to remove duplicates from the overall query result.
For eg, if you have one more row in the deferred_mailing like this
SQL> select * from DEFERRED_MAILING;
CUST_ID EMP_ID PURCHASE_
444 10 11-JAN-11
444 10 11-JAN-11
then the query without "a.drank=1" will return 4 rows like this by the outer query.
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
It'll return the below even if we use distinct on the same query(i.e. without a.drank=1)
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
which contains duplicates again.
So, we need a combination of distinct and dense here.
btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
Regards,
CSM

I am unable to get into my Mahjong Solitare game at the code entry page

I am unable to get into my Mahjong Solitaire game at the point of the code page. It used to but now is stopping at a support page.

what game? where? what's the relationship between your game and adobe?

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

MERGE Statement - unable to get a stable set of rows in the source tables

OWB Client: 10.1.0.2.0
OWB Repository: 10.1.0.1.0
I am trying to create a MERGE in OWB.
I get the following error:
ORA-12801: error signaled in parallel query server P004 ORA-30926: unable to get a stable set of rows in the source tables
I have read the other posts regarding this and can't seem to get a fix.
The target table has a unique index on the field that I am matching on.
The "incoming" data doesn't have a unique index, but I have checked and confirmed that it is unique on the appropriate key.
The "incoming" data is created by a join and filter in the mapping and I'd rather avoid having to load this data into a new table and add a unique index on this.
Any help would be great.
Thanks
Laura

Hello Laura,
The MERGE statement does not require any constraints on its target table or source table. The only requirement is that two input rows cannot update the same target row, meaning that all existing target rows can be matched by at most one input row (otherwise the MERGE would be undeterministic since you don't know which of the input rows you would end up with in the target).
If a table takes ages to load (and is not really big) I suspect that your mapping is not running in set mode and that it performs a full table scan on source data for each target row it produces.
If you ARE running in set mode you should run explain plan to get a hint on what is wrong.
Regarding your original mapping, try to set the target operator property:
Match by constraint=no constraints
and then check the Loading properties on each target column.
Regards, Hans Henrik

Updated iphone 4 to iOS 6 but I can't get Siri to start by holding down the home key... Am I missing something? I thought Siri is included in iOS 6!

I Updated my iphone 4 to iOS 6 but I can't get Siri to start by holding down the home key... Am I missing something? I thought Siri is included in iOS 6!

Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Cellular data charges may apply.

The only way to get lion to start is to hold the eject button down, otherwise I just get a white screen. Any cures?

The only way to get lion to start is to hold the eject button down, otherwise I just get a white screen. Any cures?
this is what I'm running on ?
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 12 GB 800 MHz DDR2 FB-DIMM
Graphics NVIDIA GeForce 8800 GT 512 MB
Software Mac OS X Lion 10.7.2 (11C74)

thanks,
I tried and it worked once, then went back to the white screen, so I'm back to hollding down the eject button.
thank you anyway.
K

HT4889 Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

See Pondini's Setup New Mac guide for possible answers.

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Agents unable to perform Call Transfer using the shortcut button

Hello All,
We are facing this same issue for the last 3 days, any help will be truly appreciated.
Scenario : When customer calls in, Few agents are unable to do call transfer using the shortcut button on the CAD Interface. however when this fails they still can manually transfer the call by entering the number as a work around.
This is not happening for all agents and for those this is happening it happens intermittently. What could be the reason. please guide.

This def sounds like an MTP issue.. Are you using software MTP or hardware MTP's on the gateways? I suggest using Software session on the gateways as it won't use DSP and will allow for much more the CUCM itself can support...
Pretty good chance this is the issue...
(Check RTMT and see if you are getting alerts about media resource group list exhausted)
Chad

Unable to get it to start right away using the shortcut

Similar Messages

Maybe you are looking for