Unable to Install Cordova for App Builder Environment on Mac OS ?

Hi Experts,
I'm Unable to Install Cordova-3.4.0 V on Mac OS, Here i'm Getting Errors like
" $ sudo npm install -g cordova-3.4.0
npm ERR! network tunneling socket could not be established, cause=connect ECONNREFUSED
npm ERR! network This is most likely not a problem with npm itself
npm ERR! network and is related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly.  See: 'npm help config'
npm ERR! System Darwin 13.0.0
npm ERR! command "node" "/usr/local/bin/npm" "install" "-g" "cordova-3.4.0"
npm ERR! cwd /Users/yqlabs
npm ERR! node -v v0.10.29
npm ERR! npm -v 1.4.14
npm ERR! code ECONNRESET
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR!     /Users/yqlabs/npm-debug.log
npm ERR! not ok code 0 "
In Windows It's Installed with out these issues, Please Help me out from this Issue.
Thanks In Advance,
Vamsi K.

Hi Vamsi ,
Its purely a network connectivity error / missing proxy settings. 
Please set a proxy to NPM and try again.
You can have a look at Using npm behind a corporate proxy - Wil Boayue to set proxy to npm. 

Similar Messages

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I am unable to install itunes for windows 7

    I am unable to install itunes for windows 7.I want to import audio material to my iphon4s from my lap top

    rashin wrote:
    I am unable to install itunes for windows 7
    Why not?  Should we guess at the issue or do you plan to provide details so that others can offer suggestions/solutions?

  • Illustrator template for App Builder v26 & 27 icons, splashscreens etc.

    Here's a handy Illustrator template for creating all the icons etc. for App Builder v26 and 27.
    Read the instructions in the PDF first, the link to download the template file is inside:http://bit.ly/1b50v0m
    Like this post if you find it usefull

    The template has now been updated for v28. Download link is still the same
    For iOS 7, additional app icon sizes are required: 152x152 (iPad HD), 76x76 (iPad SD), and 120x120 (iPhone). These new icon files are required when you build either a v27 or v28 app in DPS App Builder.

  • How do i quit plugin? I am unable to install adobe for this reason

    When attempting to install adobe, I am being asked to quit plugins - I am unable to install adobe for this reason

    Windows? Mac? What Browser?

  • Turning off NTLM for App Builder

    I am using the NTLM authentication as described in http://htmldb.oracle.com/pls/otn/f?p=18326:44:::::P44_ID:1722
    This works fine, but I realized that it works at a DAD level, because my dads.conf now has
    LoadModule ntlm_module        libexec/mod_ntlm.so
    <Location /pls/htmldb>
      SetHandler pls_handler
      Order deny,allow
      Allow from all
      AllowOverride None
      PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
      PlsqlDatabasePassword htmldb123
      PlsqlDatabaseConnectString myconnectstring
      PlsqlDefaultPage htmldb
      PlsqlDocumentTablename wwv_flow_file_objects$
      PlsqlDocumentPath docs
      PlsqlDocumentProcedure wwv_flow_file_manager.process_download
      PlsqlAuthenticationMode Basic
      PlsqlNLSLanguage american_america.al32utf8
    AuthType NTLM
    AuthName "NTLM authentication"
    NTLMAuth On
    NTLMAuthoritative On
    NTLMBasicAuth On
    NTLMDomain mydomain
    NTLMBackup mypdc
    NTLMServer mybackuppdc
    require valid-user
    </Location>So, in effect, even during development, every page view in HTML DB Application Builder also talks to my domain PDC to get my domain id and stuff.
    This is unnecessary, I need all that NTLM stuff only when running my applications, not when running HTML DB pages itself.
    Any ideas?
    Thanks

    I am seeing that sometimes pages take a long time to load or even timeout (404 or some other errors) when I am working in the App Builder environment.
    This used to be fine before, so I started to take a look at my Apache logs and saw some NTLM/SMB related timeouts when Apache was fetching information from my domain server.
    Strictly speaking, I don't need NTLM authentication when I am using the Application Builder, only my apps need it (my page sentry uses it), so I thought it might be prudent to reduce this "unnecessary load" on my domain server/network.
    Thanks.

  • Message: "Waiting for App Store to download Mac OS X Server Add on"

    Trying to install 10.7 (from 10.6.8) on Mac Mini server 4,1. I don't use it as a server, and don't know anything about that.I get a message "Waiting for App Store to download Mac OS X Server Add on" check download at App store. There is none. Help?
    Mac Mini Server 4.1/2.66 GHz/Intel Core 2 Duo/8 GB Memory

    Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
    So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
    What a pain.
    If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
    Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

  • What is meant by  waiting for app store to download mac os x server add on.

    Can't get past that step to upgrade xserver from 10.6.8 to 10.7.  I am trying to upgrade my xserver 10.6.8 to 10.7.  I have purchased the os x lion and the lion server, and they are both downloaded on the machine, but it will not let me get past the step of waiting for app store to download mac os x server add on.  Anyone know what that is or where I can get it?  App store never starts a download. tia

    Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
    So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
    What a pain.
    If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
    Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

  • Waiting for App Store to download Mac OS X Server Add On.

    Hi there,
    I am trying to upgrade Mac OS X Server to Mac Lion Server. I get this message when i try to install the OS X Lion
    Waiting for App Store to download Mac OS X Server Add On.
    Please help.

    the message is normal, you are requested to wait!
    check that, when "install" is pressed in App Store a new icon should go to your dock (the "install MacOSX lion" application itself).
    the upgrade is up to 4Gb and apple serves at no more than 200-400Kbps (at least to my country), so be patient.
    If you need more patience, but JUST NOOOOOWWW!!! =)
    then you can see your network activity in Utilities -> Activity Monitor -> Network
    Let us know if there is no Activity during the download!
    And also if you successfully install lion!

  • Why Waiting for App Store to download Mac OS X Server Add On. stopping Lion download?

    I just purchased Mac os x lion and this message is popping up : Waiting for App Store to download Mac OS X Server Add On.
    Help! How do i get it to install?

    Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
    So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
    What a pain.
    If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
    Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

  • Can I install Linux for Windows on my Apple Mac and afterwards use old windows programs as PageMaker on my new Mac. If yes where can I find Linus windows for Mac

    Can I install Linux for Windows at my new Mac and afterwards use old Windows programs as Photo Shop and PageMaker on my Mac? If yes where at the Internet can I find Linux for Mac and Windows?

    What is your definition of a "Linux for Windows" ?
    There is Linux like Ubuntu which can be installed on a Mac
    See the UbuntuForuns here https://wiki.ubuntu.com/MactelSupportTeam
    And there is Microsoft Windows which can be installed and used on a Mac with Apples BootCamp http://www.apple.com/support/bootcamp/ or through Virtualization apps like Parallels, VMWare Fusion or VirtualBox.
    Windows Programs don't run in a Linux only in Windows.
    Stefan

  • HT1338 Why can't I install Leopard for PowerPC on my old Mac Mini?

    Why can't I install Leopard for PowerPC on my old Mac Mini? The massage "This can not be installed on this computer" appears.

    My thoughts are that your difficulties could be one of these:
    your non-retail DVD may only work on a very limited range of Mac minis
    the installer may not like your new RAM
    the installer may not like the language change especially if the disk has not been erased first
    I have seen a little evidence for 3 in the code of other Leopard install DVDs - they appear to have less stringent language checks for erased volumes. Whilst I have never modified model specific installers I have modified retail installers to ignore speed and RAM checks.
    My advice:
    back up your whole mini hard disk to an external disk - see notes
    erase the hard disk and partition into 2 volumes with Leopard install DVD
    try to install Leopard on one volume
    put original OS on the other volume
    Notes:
    Carbon Copy Cloner can be used to backup the whole hard disk
    ensure the mini can be booted from the external disk before you erase the internal disk

  • Unable to install updates via App Store or Installer.app

    Ever since updating my 2008 Mac Pro from Mountain Lion (+Server.app) to Mavericks (10.9.3+Server.app) about a month ago, I have been unable to install updates on that system in any way, shape, or form.  Fixing permissions did not fix the problem, and reinstalling Mavericks also did not fix the problem.
    When trying to check for updates in the App Store, I run into this error:
    I have researched this problem extensively, and found no solution or workaround.  I also could find little in the way of relevant log entries for the problem.
    So, now I'm trying to install 10.9.4 manually, from a downloaded .dmg.  As you can see from the screenshot below, I started the installation of 10.9.4 over five and a half hours ago.  One message happened almost an hour after kicking off installation, but still nothing has happened.  The logs are included inline here for your convenience.
    Jul  5 16:04:21 snowbird Installer[45604]: It took 0.00 seconds to summarize the package selections.
    Jul  5 16:04:21 snowbird Installer[45604]: Will do post-logout install for package with trust 501
    Jul  5 16:04:21 snowbird softwareupdated (200)[174]: Adding client SUUpdateServiceClient pid=45604, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Installer.app/Contents/MacOS/Installer)
    Jul  5 16:04:21 snowbird installd[94071]: PackageKit: Adding client PKInstallDaemonClient pid=174, uid=200 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)
    Jul  5 17:01:01 snowbird Installer[45604]: IFDCC: padded OS update package with 1341440
    Has anybody seen this before?  Help much appreciated!
    -peter

    Here you go, Mr. Davis ... and thanks!
    Jul  5 16:03:07 snowbird Installer[45604]: LSExceptions [0x7f8e22100c70] loaded
    Jul  5 16:03:07 snowbird Installer[45604]: @(#)PROGRAM:Install  PROJECT:Install-846
    Jul  5 16:03:07 snowbird Installer[45604]: @(#)PROGRAM:Installer  PROJECT:Installer-721
    Jul  5 16:03:07 snowbird Installer[45604]: Hardware: MacPro3,1 @ 2.80 GHz (x 8), 12288 MB RAM
    Jul  5 16:03:07 snowbird Installer[45604]: Running OS Build: Mac OS X 10.9.3 (13D65)
    Jul  5 16:03:07 snowbird Installer[45604]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Jul  5 16:03:07 snowbird Installer[45604]: Env: TMPDIR=/var/folders/r2/wbhxrq5n4vn7kxch9wb8lr6r0000mt/T/
    Jul  5 16:03:07 snowbird Installer[45604]: Env: SHELL=/bin/tcsh
    Jul  5 16:03:07 snowbird Installer[45604]: Env: HOME=/Users/peter
    Jul  5 16:03:07 snowbird Installer[45604]: Env: USER=peter
    Jul  5 16:03:07 snowbird Installer[45604]: Env: LOGNAME=peter
    Jul  5 16:03:07 snowbird Installer[45604]: Env: SSH_AUTH_SOCK=/tmp/launch-VQKNdI/Listeners
    Jul  5 16:03:07 snowbird Installer[45604]: Env: Apple_PubSub_Socket_Render=/tmp/launch-hzmFry/Render
    Jul  5 16:03:07 snowbird Installer[45604]: Env: DISPLAY=/tmp/launch-jKh9Nb/org.macosforge.xquartz:0
    Jul  5 16:03:07 snowbird Installer[45604]: Env: COMMAND_MODE=unix2003
    Jul  5 16:03:07 snowbird Installer[45604]: Env: __CHECKFIX1436934=1
    Jul  5 16:03:07 snowbird Installer[45604]: Env: __CF_USER_TEXT_ENCODING=0x29A:0:0
    Jul  5 16:03:07 snowbird Installer[45604]: OS X Update  Installation Log
    Jul  5 16:03:07 snowbird Installer[45604]: Opened from: /Volumes/OS X 10.9.4 Update/OSXUpd10.9.4.pkg
    Jul  5 16:03:07 snowbird Installer[45604]: Warning: accessing obsolete X509Anchors.
    Jul  5 16:03:07 snowbird Installer[45604]: Product archive /Volumes/OS X 10.9.4 Update/OSXUpd10.9.4.pkg trustLevel=501
    Jul  5 16:03:17 snowbird Installer[45604]: LSExceptions [0x7f8e22100c70] unloaded
    Jul  5 16:03:27 snowbird Installer[45604]: IFDCC: padded OS update package with 1341440
    Jul  5 16:03:30 --- last message repeated 2 times ---
    Jul  5 16:03:30 snowbird Installer[45604]: InstallerStatusNotifications plugin loaded
    Jul  5 16:04:19 snowbird runner[45656]: Administrator authorization granted.
    Jul  5 16:04:21 snowbird Installer[45604]: =============================================================================== =
    Jul  5 16:04:21 snowbird Installer[45604]: User picked Custom Install
    Jul  5 16:04:21 snowbird Installer[45604]: Choices selected for installation:
    Jul  5 16:04:21 snowbird Installer[45604]: Install: "OS X Update"
    Jul  5 16:04:21 --- last message repeated 1 time ---
    Jul  5 16:04:21 snowbird Installer[45604]: OSXUpd10.9.4.pkg#OSXUpd10.9.4.pkg : delta : 1.0.0.0.1.1306847324
    Jul  5 16:04:21 snowbird Installer[45604]: =============================================================================== =
    Jul  5 16:04:21 snowbird Installer[45604]: It took 0.00 seconds to summarize the package selections.
    Jul  5 16:04:21 snowbird Installer[45604]: Will do post-logout install for package with trust 501
    Jul  5 16:04:21 snowbird softwareupdated (200)[174]: Adding client SUUpdateServiceClient pid=45604, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Installer.app/Contents/MacOS/Installer)
    Jul  5 16:04:21 snowbird installd[94071]: PackageKit: Adding client PKInstallDaemonClient pid=174, uid=200 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)
    Jul  5 17:01:01 snowbird Installer[45604]: IFDCC: padded OS update package with 1341440
    Jul  7 16:51:51 snowbird /System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_firstrun_tasks (200)[42]: swscan.apple.com is available: TRUE
    Jul  7 16:51:51 snowbird softwareupdated (200)[184]: softwareupdated: Starting with build 10.9.3 (13D65)
    Jul  7 16:51:57 snowbird softwareupdated (200)[184]: Product 031-02368: no package found for identifier com.apple.pkg.BootCampESD
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1219: no package found for identifier com.apple.pkg.MultiLingualVoice_zh_HK_sinji
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1220: no package found for identifier com.apple.pkg.MultiLingualVoice_es_ES_monica
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1614: no package found for identifier com.apple.pkg.RemoteDesktopClientShell
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1886: no package found for identifier com.apple.pkg.RemoteDesktopClientShell
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1929: no package found for identifier com.apple.pkg.MultiLingualVoice_zh_TW_meijia
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1930: no package found for identifier com.apple.pkg.MultiLingualVoice_pl_PL_ewa
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1934: no package found for identifier com.apple.pkg.MultiLingualVoice_pl_PL_zosia
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1935: no package found for identifier com.apple.pkg.MultiLingualVoice_es_ES_jorge
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1937: no package found for identifier com.apple.pkg.MultiLingualVoice_zh_CN_tingting
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1939: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_es_ES
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1940: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_en_US
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1942: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_es_US
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1943: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_ja_JP
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1945: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_fr_FR
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1947: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_zh_HK
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1948: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_en_GB
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 031-1951: no package found for identifier com.apple.pkg.SpeechRecognitionCoreLanguage_ko_KR
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8607: no package found for identifier com.apple.pkg.MultiLingualVoice_th_TH_kanya
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8608: no package found for identifier com.apple.pkg.MultiLingualVoice_es_AR_diego
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8611: no package found for identifier com.apple.pkg.MultiLingualVoice_fr_FR_aurelie
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8613: no package found for identifier com.apple.pkg.MultiLingualVoice_en_US_susan
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8615: no package found for identifier com.apple.pkg.MultiLingualVoice_en_IN_veena
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8616: no package found for identifier com.apple.pkg.MultiLingualVoice_fr_CA_amelie
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8618: no package found for identifier com.apple.pkg.MultiLingualVoice_es_MX_angelica
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8621: no package found for identifier com.apple.pkg.MultiLingualVoice_el_GR_melina
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8622: no package found for identifier com.apple.pkg.MultiLingualVoice_da_DK_sara
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8626: no package found for identifier com.apple.pkg.MultiLingualVoice_ja_JP_kyoko
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8627: no package found for identifier com.apple.pkg.MultiLingualVoice_en_US_allison
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8629: no package found for identifier com.apple.pkg.MultiLingualVoice_es_CO_carlos
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8632: no package found for identifier com.apple.pkg.MultiLingualVoice_no_NO_nora
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8641: no package found for identifier com.apple.pkg.MultiLingualVoice_es_MX_paulina
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8643: no package found for identifier com.apple.pkg.MultiLingualVoice_no_NO_henrik
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8645: no package found for identifier com.apple.pkg.MultiLingualVoice_fr_FR_thomas
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8648: no package found for identifier com.apple.pkg.MultiLingualVoice_it_IT_federica
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8651: no package found for identifier com.apple.pkg.MultiLingualVoice_fr_CA_chantal
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8654: no package found for identifier com.apple.pkg.MultiLingualVoice_en_scotland_fiona
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8657: no package found for identifier com.apple.pkg.MultiLingualVoice_en_US_samantha
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8660: no package found for identifier com.apple.pkg.MultiLingualVoice_en_GB_serena
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8663: no package found for identifier com.apple.pkg.MultiLingualVoice_ro_RO_ioana
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8665: no package found for identifier com.apple.pkg.MultiLingualVoice_cs_CZ_iveta
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8667: no package found for identifier com.apple.pkg.MultiLingualVoice_es_CO_soledad
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8669: no package found for identifier com.apple.pkg.MultiLingualVoice_nl_NL_claire
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8670: no package found for identifier com.apple.pkg.MultiLingualVoice_ru_RU_katya
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8671: no package found for identifier com.apple.pkg.MultiLingualVoice_en_ZA_tessa
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8673: no package found for identifier com.apple.pkg.MultiLingualVoice_nl_NL_xander
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8675: no package found for identifier com.apple.pkg.MultiLingualVoice_pt_PT_catarina
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8676: no package found for identifier com.apple.pkg.MultiLingualVoice_tr_TR_cem
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8682: no package found for identifier com.apple.pkg.MultiLingualVoice_it_IT_paola
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8686: no package found for identifier com.apple.pkg.MultiLingualVoice_id_ID_damayanti
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8687: no package found for identifier com.apple.pkg.MultiLingualVoice_ru_RU_yuri
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8689: no package found for identifier com.apple.pkg.MultiLingualVoice_en_GB_kate
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8690: no package found for identifier com.apple.pkg.MultiLingualVoice_el_GR_nikos
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8694: no package found for identifier com.apple.pkg.MultiLingualVoice_en_US_tom
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8695: no package found for identifier com.apple.pkg.MultiLingualVoice_sv_SE_oskar
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8697: no package found for identifier com.apple.pkg.MultiLingualVoice_de_DE_markus
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8699: no package found for identifier com.apple.pkg.MultiLingualVoice_en_AU_lee
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8700: no package found for identifier com.apple.pkg.MultiLingualVoice_de_DE_petra
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8702: no package found for identifier com.apple.pkg.MultiLingualVoice_ar_SA_tarik
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8704: no package found for identifier com.apple.pkg.MultiLingualVoice_ja_JP_otoya
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8707: no package found for identifier com.apple.pkg.MultiLingualVoice_de_DE_anna
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Product 091-8710: no package found for identifier com.apple.pkg.MultiLingualVoice_da_DK_magnus
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: BackgroundActivity: Activity check-in with Interval 21600
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=42, uid=200, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_firstrun_tasks)
    Jul  7 16:52:05 snowbird softwareupdated (200)[184]: Removing client SUUpdateServiceClient pid=42, uid=200, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_firstrun_tasks)
    Jul  7 16:55:21 snowbird softwareupdate_notify_agent (666)[701]: softwareupdate_notify_agent[uid=666]: Running for LoginDone
    Jul  7 16:55:21 snowbird softwareupdate_notify_agent (666)[701]: AssertionMgr: Take com.apple.softwareupdate.NotifyAgentAssertion assertion with type BackgroundTask for pid 701
    Jul  7 16:55:21 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=701, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_notify_agent)
    Jul  7 16:55:21 snowbird softwareupdate_notify_agent (666)[701]: softwareupdate_notify_agent[uid=666]: Notifying with params: {
         UpdateNotificationsOnly = 1;
    Jul  7 16:55:21 snowbird softwareupdate_notify_agent (666)[701]: softwareupdate_notify_agent[uid=666]: appstoreupdateagent notified
    Jul  7 16:55:21 snowbird softwareupdate_notify_agent (666)[701]: AssertionMgr: Cancel com.apple.softwareupdate.NotifyAgentAssertion assertion for pid 701
    Jul  7 16:55:44 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=715, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Resources/s toreagent)
    Jul  7 16:55:48 snowbird softwareupdated (200)[184]: Removing client SUUpdateServiceClient pid=701, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_notify_agent)
    Jul  7 16:57:48 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1147, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com .apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent)
    Jul  7 16:58:37 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1288, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com .apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent)
    Jul  7 16:58:37 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1292, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com .apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent)
    Jul  7 16:58:37 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1291, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com .apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent)
    Jul  7 16:58:37 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1290, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com .apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent)
    Jul  7 16:59:14 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1111, uid=666, installAuth=NO rights=(), transactions=0 (/Applications/App Store.app/Contents/MacOS/App Store)
    Jul  7 16:59:19 snowbird softwareupdated (200)[184]: Scan for changed products with previous 0 updates:  (plus 94 predicate-only)
    Jul  7 16:59:19 snowbird softwareupdated (200)[184]: SoftwareUpdate: Scan for client pid 184 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)
    Jul  7 16:59:22 snowbird softwareupdated (200)[184]: SoftwareUpdate: Using catalog https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog.gz
    Jul  7 16:59:29 snowbird suhelperd (0)[189]: SoftwareUpdate: timed out waiting for makequeues to run
    Jul  7 16:59:29 snowbird softwareupdated (200)[184]: SoftwareUpdate: Reusing previous package sources (SUCatalogPackageSource, SUContentLocatorPackageSource) for partial scan
    Jul  7 16:59:46 snowbird softwareupdated (200)[184]: SoftwareUpdate: elapsed scan time = 26.7
    Jul  7 16:59:47 snowbird softwareupdated (200)[184]: Scan (f=0, d=0) found 2 updates: 031-04361, 031-04978 (plus 94 predicate-only)
    Jul  7 16:59:47 snowbird softwareupdated (200)[184]: Product 031-02368: no package found for identifier com.apple.pkg.BootCampESD
    Jul  7 16:59:49 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1415, uid=0, installAuth=NO rights=(), transactions=0 (/usr/sbin/softwareupdate)
    Jul  7 17:00:30 snowbird softwareupdated (200)[184]: Product 031-1219: no package found for ...
    Jul  7 17:00:30 snowbird softwareupdated (200)[184]: Ramped updates marked
    Jul  7 17:00:30 snowbird softwareupdated (200)[184]: SoftwareUpdate: Scan for client pid 184 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)
    Jul  7 17:00:30 snowbird softwareupdated (200)[184]: Product 031-02368: no package found for identifier ...
    Jul  7 17:00:30 snowbird softwareupdated (200)[184]: SoftwareUpdate: Catalog Not Modified since last scan ("12c17-4fd9fc0cb02c0")
    Jul  7 17:00:30 snowbird softwareupdated (200)[184]: SoftwareUpdate: Using catalog https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog.gz
    Jul  7 17:02:49 snowbird softwareupdated (200)[184]: JS: 10.9.3
    Jul  7 17:02:52 snowbird softwareupdated (200)[184]: JS: Connected printer: MANUFACTURER:EPSON;MODEL:WP-4530 Series
    Jul  7 17:02:52 snowbird softwareupdated (200)[184]: JS: Connected printer: MANUFACTURER:EPSON;MODEL:EPSON WP-4530 Series
    Jul  7 17:03:09 snowbird Installer[1730]: LSExceptions [0x7ffd98411830] loaded
    Jul  7 17:03:09 snowbird Installer[1730]: @(#)PROGRAM:Install  PROJECT:Install-846
    Jul  7 17:03:09 snowbird Installer[1730]: @(#)PROGRAM:Installer  PROJECT:Installer-721
    Jul  7 17:03:09 snowbird Installer[1730]: Hardware: MacPro3,1 @ 2.80 GHz (x 8), 12288 MB RAM
    Jul  7 17:03:09 snowbird Installer[1730]: Running OS Build: Mac OS X 10.9.3 (13D65)
    Jul  7 17:03:09 snowbird Installer[1730]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Jul  7 17:03:09 snowbird Installer[1730]: Env: TMPDIR=/var/folders/r2/wbhxrq5n4vn7kxch9wb8lr6r0000mt/T/
    Jul  7 17:03:09 snowbird Installer[1730]: Env: SHELL=/bin/tcsh
    Jul  7 17:03:09 snowbird Installer[1730]: Env: HOME=/Users/peter
    Jul  7 17:03:09 snowbird Installer[1730]: Env: USER=peter
    Jul  7 17:03:09 snowbird Installer[1730]: Env: LOGNAME=peter
    Jul  7 17:03:09 snowbird Installer[1730]: Env: SSH_AUTH_SOCK=/tmp/launch-BmQDON/Listeners
    Jul  7 17:03:09 snowbird Installer[1730]: Env: Apple_PubSub_Socket_Render=/tmp/launch-UKeIBF/Render
    Jul  7 17:03:09 snowbird Installer[1730]: Env: DISPLAY=/tmp/launch-ZiY74U/org.macosforge.xquartz:0
    Jul  7 17:03:09 snowbird Installer[1730]: Env: COMMAND_MODE=unix2003
    Jul  7 17:03:09 snowbird Installer[1730]: Env: __CHECKFIX1436934=1
    Jul  7 17:03:09 snowbird Installer[1730]: Env: __CF_USER_TEXT_ENCODING=0x29A:0:0
    Jul  7 17:03:10 snowbird Installer[1730]: OS X Update  Installation Log
    Jul  7 17:03:10 snowbird Installer[1730]: Opened from: /Volumes/OS X 10.9.4 Update/OSXUpd10.9.4.pkg
    Jul  7 17:03:12 snowbird Installer[1730]: Warning: accessing obsolete X509Anchors.
    Jul  7 17:03:12 snowbird Installer[1730]: Product archive /Volumes/OS X 10.9.4 Update/OSXUpd10.9.4.pkg trustLevel=501
    Jul  7 17:03:18 snowbird Installer[1730]: IFDCC: padded OS update package with 1341440
    Jul  7 17:03:21 --- last message repeated 2 times ---
    Jul  7 17:03:21 snowbird Installer[1730]: LSExceptions [0x7ffd98411830] unloaded
    Jul  7 17:03:25 snowbird Installer[1730]: InstallerStatusNotifications plugin loaded
    Jul  7 17:03:33 snowbird runner[1800]: Administrator authorization granted.
    Jul  7 17:03:35 snowbird Installer[1730]: =============================================================================== =
    Jul  7 17:03:35 snowbird Installer[1730]: User picked Custom Install
    Jul  7 17:03:35 snowbird Installer[1730]: Choices selected for installation:
    Jul  7 17:03:35 snowbird Installer[1730]: Install: "OS X Update"
    Jul  7 17:03:35 --- last message repeated 1 time ---
    Jul  7 17:03:35 snowbird Installer[1730]: OSXUpd10.9.4.pkg#OSXUpd10.9.4.pkg : delta : 1.0.0.0.1.1306847324
    Jul  7 17:03:35 snowbird Installer[1730]: =============================================================================== =
    Jul  7 17:03:35 snowbird Installer[1730]: It took 0.00 seconds to summarize the package selections.
    Jul  7 17:03:35 snowbird Installer[1730]: Will do post-logout install for package with trust 501
    Jul  7 17:03:35 snowbird softwareupdated (200)[184]: Adding client SUUpdateServiceClient pid=1730, uid=666, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Installer.app/Contents/MacOS/Installer)
    Jul  7 17:03:35 snowbird installd[1823]: installd: Starting
    Jul  7 17:03:35 snowbird installd[1823]: installd: uid=0, euid=0
    Jul  7 17:03:35 snowbird installd[1823]: PackageKit: Adding client PKInstallDaemonClient pid=184, uid=200 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)
    Jul  7 17:15:30 snowbird softwareupdated (200)[184]: SoftwareUpdate: timed-out waiting for product load operations to finish
    Jul  7 17:15:30 snowbird softwareupdated (200)[184]: Scan got error Can't load data from the Apple Software Update server.
    Jul  7 17:15:31 snowbird softwareupdated (200)[184]: Scan for changed products with previous 2 updates: 031-04361, 031-04978 (plus 94 predicate-only)
    Jul  7 17:15:31 snowbird softwareupdated (200)[184]: SoftwareUpdate: Scan for client pid 184 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)
    Jul  7 17:15:31 snowbird softwareupdated (200)[184]: SoftwareUpdate: Catalog Not Modified since last scan ("12c17-4fd9fc0cb02c0")
    Jul  7 17:16:09 snowbird suhelperd (0)[189]: Verifying package at path: /Library/Updates/_ManualUpdate/OSXUpd10.9.4.pkg
    Jul  7 17:16:09 snowbird suhelperd (0)[189]: packageWithPath returned nil!
    Jul  7 17:27:30 snowbird softwareupdated (200)[184]: 1477.5s to run getPPDVersion -all /Library/Printers/PPDs/Contents/Resources
    Jul  7 17:27:30 snowbird softwareupdated (200)[184]: Added 3965 PPD versions from /Library/Printers/PPDs/Contents/Resources
    Jul  7 17:30:31 snowbird softwareupdated (200)[184]: SoftwareUpdate: timed-out waiting for product load operations to finish
    Jul  7 17:30:31 snowbird softwareupdated (200)[184]: Scan got error Can't load data from the Apple Software Update server.
    Jul  7 19:24:27 snowbird Installer[1730]: IFDCC: padded OS update package with 1341440
    Jul  7 19:52:17 snowbird softwareupdated (200)[184]: BackgroundActivity: Starting Background Check Activity

  • Tip: Unable to Install or Update Apps Using the iPhone's App Store?

    I had a problem today where I found myself unable to install updates, or install new or previously purchased apps using the App Store on the iPhone. However, I had no problem with the installation of apps when I plugged my iPhone into my computer, opened iTunes and dragged the app I wanted over to my iPhone. So, I did the usual: I tried a reboot, and, when that didn't work, I powered my phone off and waited a few minutes before turning it back on. Still no love with the updating or installation of apps using the App Store on my iPhone.
    Here is what I did do to fix it:
    I keep backups of my iPhone on my MBP and I back up my phone regularly. If you do not, you should start doing so. Anyway, I went ahead and plugged my phone into my computer and launched iTunes (I also update my MBP daily if necessary, so the most current version of iTunes was used).
    Once my phone showed up in iTunes and I could select it, I right-clicked on the iPhone's name (I use a MBP, but I know Windows users might view this, too, so universal language is what I will use - for Mac users, right-clicking means using two finger tap on a touchpad or using the good 'ol Control-click) and selected "Back Up" from the menu.
    Once the phone was backed up, I right-clicked again on the iPhone's name and selected "Restore from Backup...".
    I made sure the value for "iPhone Name" was correct and that the "Last Backed Up" day and time values were correct and I clicked the "Restore" button and let the restore process finish completely (wait until your iPhone shows up in iTunes again before doing anything else with your phone).
    Once the restore was complete, I was extra cautious and powered off then powered on my phone. Finally, I went ahead and plugged it back into my MBP and made sure that the phone showed up in iTunes.
    Following all of that, I launched the App Store on my iPhone again, entered the password for my Apple ID and updating apps, installing new apps, and installing previously purchased apps from iCloud all worked again.
    Please note that this process is much different than just simply clicking the "Restore" button on your iPhone's homepage in iTunes. That will prompt you to backup your phone, completely restore it to factory defaults, and, then require you to restore from backup to get all your settings and such back. This is not the route I took - I simply restored from an existing backup. I want to make sure that this point is clear. Although, if restoring from an existing backup does not solve the issue at first, then perhaps a restore to factory defaults followed up with a restore from a backup will do the trick, too. I just did not want to waste my time taking the much longer route first and was happy to find my iPhone's App Store working again by simply restoring my phone using an existing backup.
    I have seen a lot of posts regarding this issue in the support communities, with none of them having an answer (even after calling Apple Support). I hope this helps anyone else that has had, is having or will have the same issue! Feel free to post comments regarding other solutions you have found for the same issue - let's have one discussion where all possible solutions can be posted so iPhone users do not have to sort through a bunch of unhelpful discussions just to find a solution that was not yet documented (like I had to).

    See:
    Well known TCP and UDP ports used by Apple software products
    Also see:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • Unable to install rollup4 for Exchange 2010 SP3

    Hi,
    I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
    I know that this process will take some time to complete but I have waited 10 hours.
    I've tried to reboot the server and restart the setup.
    Exchange is functioning perfectly otherwise.
    Any help would be greatly appreciated :)
    /Søren Emig

    Hi,
    I recommend you check if the anti-virus has been disabled before you start the upgrade process.
    If you didn't ,the update could fail or take an extended amount of time. 
    Also, disable all other third-party apps/plugins that might be installed (like backup agents).
    In addition,the following articles for your reference:
    Install the Latest Update Rollup for Exchange 2010
    When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
    CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
    The installation takes a long time to complete.
    You receive the following message during the installation: Creating native images for .Net assemblies
    When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
    To work around this issue and to reduce installation times, turn off the
    Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
    Start Internet Explorer.
    On the Tools menu, click Internet Options.
    Click the Advanced tab, and then locate the Security section.
    Clear the Check for publisher’s certificate revocation check box, and then click
    OK.
    After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
    Generating NGEN images takes longer than expected
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

Maybe you are looking for

  • How can I get my iPhone to stop promting me to enter my wife's Apple ID when updating apps? I've checked settings for iTunes

    How can I get my iPhone 6 to stop prompting me to enter my wife's Apple ID when updating apps? I have verified in settings that my acct is listed in itunes & App Store, as well as icloud. i can download new apps fine. Have shut down phone and re-powe

  • Able to drag drop items of combobox but want to disable 1st item

    Hello Sir, I am able to drag drop elements of the combobox. Here is my code... <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" xmlns:local="*" xmlns:utils="adobe.utils.*" xmlns:contro

  • How BlazeDS & Flex Talk? Very Urgent

    Thank you for reading this post, I am new to BlazeDS - and Status: i)   Installed Flex 3 ii) JDK is installed. iii)  Downloaded BlazeDS Turnkey, and done the JAVA_HOME setups, started the tomcat server Issue Navigation : Click on Flex> File> New> Fle

  • IPhoto - album and sub-album -

    Is it possible in IPhoto to create and title a main album and have it followed by individual sum-albums? -  In other words somthing like this: ROSE (MAIN)   RED  (SUB)   YELLOW (SUB)    PINK   (SUB)   Thank you all for your help -

  • About Macbook pro Model Number

    I want to ask about Macbook Pro Model # : ME294AE/A,that support Arabic language , Do (Apple in US) sell it ?, and if not, Do Model# ME294LL/A support Arabic language ?