Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone fail

Problem:
Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone failed
But I didn't have any issue with the same pkg in Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as <SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall: /opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error] ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone that didn't have any local zone
thanks in advance

Problem:
Install NetConnect in Global Zone of Solaris 10 x86
with 5 local zone failed
But I didn't have any issue with the same pkg in
Solaris 9
Steps taken:
# groupadd netcon
# useradd -d /export/home/netcon -g netcon -m netcon
# vi /etc/shadow
change LK to NP
# ./UninstallNetConnect.003.002.001.sh
# ./InstallNetConnect.003.002.001.sh
Enter the user account to use: netcon
Enter group: netcon
Installing Sun(SM) Net Connect Proxy Core as
<SUNWsrspx>
## Installing part 1 of 1.
/etc/opt/SUNWsrspx/CustomerCert.pem
/etc/opt/SUNWsrspx/SRSCACert.pem
/etc/opt/SUNWsrspx/binaries
/etc/opt/SUNWsrspx/srsproxyconfig.cfg
/opt/SUNWsrspx/bin/srsexec
/opt/SUNWsrspx/bin/srsinstall
/opt/SUNWsrspx/bin/srsinstallmode
/opt/SUNWsrspx/bin/srsproxy
/opt/SUNWsrspx/bin/srspxrun
/opt/SUNWsrspx/bin/srspxstat
/opt/SUNWsrspx/bin/srspxtrace
/opt/SUNWsrspx/bin/srsuser
/opt/SUNWsrspx/bin/srsxfer
/opt/SUNWsrspx/lib/srsimapi.jar
/usr/lib/libsrsimapi.so.1
[ verifying class <none> ]
## Executing postinstall script.
copying initial install customer cert into place
copying initial install srs cert into place
copying initial install proxy config file into place
removing any existing uninstallscript before copying
the correct one
copying uninstall script into place
/var/sadm/pkg/SUNWsrspx/install/postinstall:
/opt/SUNWsrspx/bin/srspxrun: cannot execute
proxy queue initialization failed
pkgadd: ERROR: postinstall script did not complete
successfully
Installation of <SUNWsrspx> failed.
ERROR: pkgadd failed for: SUNWsrspx
Please correct this situation and rerun the
installation.
Exiting installation.
# cat /var/adm/messages
Oct 7 00:00:01 planet root: [ID 702911 daemon.error]
ERROR: proxy queue initialization failed
Any clue, or it will only possible in Global zone
that didn't have any local zone
thanks in advance
[I believe that it does not work in x86, watches with pkginfo - l SUNWsrspx, in the platform.
Willy Suarez
Sopport UNIX
Colombia/code]

Similar Messages

Install oracle 8.1.7 on Solaris(x86) 10 b72

Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:

try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller

Install Developer 9.0.4 On solaris x86

Hi All
we have installed oracle database 10g rel2 on solaris x86 then we are trying to install oracle application server forms and reports services standalone on the same machine but we have a problem
after running ./runInstaller we have an error
./runInstaller: /export/home/cd1/disk1/install/solaris/runInstaller: cannot execute
any one can help

Hi.
I've installed it on fedora, Red Hat as 2.1 and 3.0. Here are the instructions I followed:
http://www.oracle-base.com/articles/Linux/ArticlesLinux.php
I know they're not what you're looking for but they might give you some ideas.
Cheers
Tim...

Sun Live Upgrade with local zones Solaris 10

I have M800 server running global root (/) fs on local disk and running 6 local zones on another local disk. I am running solaris 5.10 8/07.
I used live upgrade to patch the system and created new BE (lucreate). Both root fs are mirror as RAID-1.
When I ran lucreate, it copies all 6 local zones root fs to the global root fs and failed no enogh space.
What is the best procedure to use lu with local zones.
Note: I used lu with global zone only, and worked without any problem.
regards,

I have been trying to use luupgrade for Solaris10 on Sparc, 05/09 -> 10/09.
lucreate is successful, but luactivate directs me to install 'the rest of the packages' in order to make the BE stable enough to activate. I try to find the packages indicated , but find only "virtual packages" which contain only pkgmap.
I installed upgrade 6 on a spare disk to make sure my u7 installation was not defective, but got similar results.
I got beyond luactivate on x86 a while ago, but had other snags which I left unattended.

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Successful install of 8.1.7 on Solaris 8 with more than 256Mb RAM

To all who have struggled with this one, like me. You owe me a bottle of Rogaine.... but I will accept a bottle of Jack instead.
It appears that the kernel parameters published in the Install Guide are only good for Solaris 8 with up to 256Mb RAM
If dbassist craters at around 80% in OUI with a "Can't connect to Oracle" and you have more than 256Mb on board
DOUBLE the kernel parameters !!!
shmmni = 200
shmseg = 20
semmns = 400
semmni = 200
semmls =200
semopm =200
touch /reconfigure (they don't mention that in the Guide)
reboot
If someone out there can isolate which actual damn kernel parameter is the culprit, I will gladly share some Jack with you.
Otherwise an email to [email protected] with a comment or three will suffice.
Cheers

Sorry to ask a dumb question, but want to be precise, whn you say touch/reconfigure, do you mean touch system.
WHat is the reconfigure?

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
     at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
     at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
     at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
     at oracle.net.ca.InitialSetup.<init>(Unknown Source)
     at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000      /lib/libthread.so.1
0xfefd0000      /lib/libdl.so.1
0xfeed0000      /lib/libc.so.1
0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000      /usr/lib/libCrun.so.1
0xfee50000      /lib/libsocket.so.1
0xfedc0000      /lib/libnsl.so.1
0xfeda0000      /lib/libm.so.1
0xfeeb0000      /usr/lib/libsched.so.1
0xfe9a0000      /lib/libm.so.2
0xfed50000      /lib/libscf.so.1
0xfe980000      /lib/libdoor.so.1
0xfe960000      /lib/libuutil.so.1
0xfe940000      /lib/libmd5.so.1
0xfe920000      /lib/libmp.so.2
0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000      /usr/dt/lib/libXm.so.4
0xf0cf0000      /usr/openwin/lib/libXt.so.4
0xf0cc0000      /usr/openwin/lib/libXext.so.0
0xf1890000      /usr/openwin/lib/libXtst.so.1
0xf0c30000      /usr/openwin/lib/libX11.so.4
0xf0be0000      /usr/openwin/lib/libdps.so.5
0xf0a90000      /usr/openwin/lib/libSM.so.6
0xf0a70000      /usr/openwin/lib/libICE.so.6
0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000      /lib/libkstat.so.1
0xefc40000      /lib/libgen.so.1
0xefc20000      /lib/librt.so.1
0xefbf0000      /lib/libaio.so.1
0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1     localhost.localdomain     localhost
#192.168.100.1     bt.lan.home     bt
#192.168.100.5     jacek.lan.home     jacek
# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

Solaris 10, java, local zone and priority

Hi,
I have asked this on the Solaris 10/Zone forum 4 days ago but didn't
get any response. Maybe I get better luck here?
I have a jboss container running like a dog. It's running on a niceness
of 10 (by default - why?); renice fails with
$ renice -n 0 1635
renice: 1635:setpriority: Not owner
How do I fix that, and how can I get jboss to run with a niceness of
0 or 1 at startup?
I did manage to up the niceness manually from the global zone, but that's
not really an option once the system goes production. How/where do
I set java tasks to run with a sensible priority by default?
It appears that anything java (even within the global zone) runs on a
niceness of 20 (10 is what we see inside a local zone, the global will
report 20 in prstat).
Cheers

I removed this file,/usr/lib/libmlib/libmlib_sse.so.2, but I can't still use java desktop...
is there any other solution?

Solaris x86 with card on-board

Hi all,
I got a problem when installing Solaris9 x86 on ibm NetVista Machine.
I have installed 2 other machines with separated network card sucessfully. I can configure to connecto to my LAN network.
But when install on 2 ibm NetVista machines (which include onboard network card ), It is fail to be configured to connect to the network in both following cases:
Case 1: I choose proper driver as Sun suggest for Intel VE Pro(R) 10/100 : iprb. And the Solaris detect successfully. I checked by "ifconfig -a" and saw the network card active on "iprb0".
Next, I following correct instructions to configure the network card to connect to the LAN. But when i ping IP (9.187.186.18) to other computer in our same subnet LAN,
The system display eg: "No anwer from 9.187.186.18"
I run the "snoop" command to view broadcasr ARP in an other terminal. The snoop terminal displays ARP signal boradcasting from the Solaris. However, it can nerver get ARPs from other computer in LAN.
Case 2: I add 3COM network driver to the solaris ( onboard card is no loger used ). The system can auto-detected this card and i can configure to connect to the network. The problem remain unchange.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular configuarion for on-board network card. ???
Can any boy help me to solve this problem ??
Best regards,
Thang,
Vietsoftware Developer

However, it can nerver get ARPs from other computer in LAN.Are you perhaps running "snoop" on a box different from the one that you're trying to ping, and are you using
a switched ethernet? In that case it would be OK if you only see the ARP broadcast, because the ping target
box will send the ARP reply directly to the MAC of the requesting station (i.e. there's no ARP broadcast reply),
and an ethernet switch will send the ARP reply directly to the port where the station with the given destination
MAC is connected - no other port should see the reply.
If you're trying to ping 9.187.186.18 from the new Solaris x86 box, try to run snoop on the 9.187.186.18
system. 9.187.186.18 should see the ARP broadcast from the LAN, and the 9.187.186.18 box should list the
ARP response it sends back to the LAN.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular
configuarion for on-board network card. ???I guess the interrupt handler for the NIC is not working, so the Solaris x86 sees no incomming packets.
See the "troubleshooting" section on the following page:
http://solaris-x86.org/documents/tutorials/rtls.mhtml

"Lost" ICMP6 neighbor solicitation using global link or ULA, not with local link

Hello,
Sorry for my bad english.
I have a strange issue with IPV6 and Airport.
No issue with Ethenet link (native ethernet link with MacBook Pro 2007 under 10.8.3, USB ethernet link with MacBook Air 2011 under 10.8.3).
No issue with Windows 8 via Boot Camp on Mac Book Pro 2007.
Facts :
ICMP6 Router sollication gets ICMP6 Router Advertissment.
MacBook Pro and MacBook Air under 10.8.3 gets ipv6 config.
Example for my MacBook Air :
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 04:0c:ce:da:b9:32
        inet6 fe80::60c:ceff:feda:b932%en0 prefixlen 64 scopeid 0x4
        inet6 2001:470:cd49:fee1:60c:ceff:feda:b932 prefixlen 64 autoconf
        inet6 2001:470:cd49:fee1:d9b3:40b6:bc67:c01b prefixlen 64 autoconf temporary
        inet6 fd00:fee1:fee1::60c:ceff:feda:b932 prefixlen 64 autoconf
        inet6 fd00:fee1:fee1::b8f6:3ec1:a7a6:f64f prefixlen 64 autoconf temporary
        inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255
        media: autoselect
        status: active
My MacBook Air gets 2 Global Link and 2 ULA from ICMP Router Advertissment from my router (DLink DIR-655 B1).
Local Link, Global Link and first ULA adress are acquired via EUI-64.
Others adress are random temporary address.
Connections (tcp6, udp6, icmp6) are ok from Local Link.
Examples :
Ping from MacBook Air Mac Mac OS X 10.8.3 to MacBook Pro Windows 8 via Bootcamp :
bash-3.2$ ping6 -c 1 fe80::811c:6008:f31c:2e06%en0
PING6(56=40+8+8 bytes) fe80::60c:ceff:feda:b932%en0 --> fe80::811c:6008:f31c:2e06%en0
16 bytes from fe80::811c:6008:f31c:2e06%en0, icmp_seq=0 hlim=64 time=11.112 ms
This fact is true (Local Link Ok) for all combinaison (Mac OS X 10.8.3 to Mac OS X 10.8.3, Mac OS X 10.8.3 to WIndows 8, Windows 8 to Mac OS X 10.8.3).
Issue :
Connections (tcp6, udp6, icmp6) are note possible if "destination" is under my lived running Mac OS X 10.8.3.
The destination element is essential.
I can ping from Mac OS X 10.8.3 to Windows 8.
It's why my neighbor is coherent (global, ULA, local are resolved).
bash-3.2$ ndp -a -n
Neighbor                        Linklayer Address Netif Expire    St Flgs Prbs
::1                             (incomplete)         lo0 permanent R
2001:470:cd49:fee1:60c:ceff:feda:b932 4:c:ce:da:b9:32 en0 permanent R
2001:470:cd49:fee1:6438:7211:58ce:b389 0:1e:52:71:61:9d en0 23h53m57s S
2001:470:cd49:fee1:811c:6008:f31c:2e06 0:1e:52:71:61:9d en0 23h54m12s S
2001:470:cd49:fee1:d9b3:40b6:bc67:c01b 4:c:ce:da:b9:32 en0 permanent R
fd00:fee1:fee1::60c:ceff:feda:b932 4:c:ce:da:b9:32   en0 permanent R
fd00:fee1:fee1::b8f6:3ec1:a7a6:f64f 4:c:ce:da:b9:32 en0 permanent R
fde4:416c:c381:3388:f496:c836:ac6:dcda (incomplete) utun0 permanent R
fe80::1%lo0                     (incomplete)         lo0 permanent R
fe80::1%en0                     (incomplete)         en0 expired   N
fe80::60c:ceff:feda:b932%en0    4:c:ce:da:b9:32      en0 permanent R
fe80::3608:4ff:fee1:8ada%en0    34:8:4:e1:8a:da      en0 23h59m24s S R
fe80::811c:6008:f31c:2e06%en0   0:1e:52:71:61:9d     en0 23h56m35s S
fe80::f496:c836:ac6:dcda%utun0 (incomplete)       utun0 permanent R
But :
I can't ping from Mac OS X 10.8.3 to Mac OS X 10.8.3 if I use Global Link adress or ULA adress.
I can't ping from Windows 8 to Mac OS X 10.8.3 if I use Global Link adress or ULA adress.
Example (from Windows 8, I have rebooted my MacBook Pro, but effets are similars).
C:\Windows\SysWOW64>ping -n 1 2001:470:cd49:fee1:60c:ceff:feda:b932
Envoi d'une requ?te 'Ping' 2001:470:cd49:fee1:60c:ceff:feda:b932 avec 32 octets
de donn?es?:
Impossible de joindre l'h?te de destination.
Statistiques Ping pour 2001:470:cd49:fee1:60c:ceff:feda:b932:
    Paquets?: envoy?s = 1, re?us = 0, perdus = 1 (perte 100%),
Interface 12 : Wi-Fi
Adresse Internet                              Adresse physique   Type
2001:470:cd49:fee1::                          00-00-00-00-00-00 Inaccessible
2001:470:cd49:fee1:60c:ceff:feda:b932         Inaccessible       Inaccessible
fe80::60c:ceff:feda:b932                      04-0c-ce-da-b9-32 Caduque
fe80::3608:4ff:fee1:8ada                      34-08-04-e1-8a-da Caduque (Routeu
r)
ff02::1                                       33-33-00-00-00-01 Permanent
ff02::2                                       33-33-00-00-00-02 Permanent
ff02::c                                       33-33-00-00-00-0c Permanent
ff02::16                                      33-33-00-00-00-16 Permanent
ff02::fb                                      33-33-00-00-00-fb Permanent
ff02::1:3                                     33-33-00-01-00-03 Permanent
ff02::1:ff1c:2e06                             33-33-ff-1c-2e-06 Permanent
ff02::1:ffce:b389                             33-33-ff-ce-b3-89 Permanent
ff02::1:ffda:b932                             33-33-ff-da-b9-32 Permanent
ff02::1:ffe1:8ada                             33-33-ff-e1-8a-da Permanent
Using WireShark, I noticed :
- Destination under my 2 Lived Mac OS X 10.8.3 doesn't received ICMP6 neighbor solicitation if adress are Global Link or ULA.
But ICMP6 neighbor sollicitation are emitted.
No issue with Local Link address.
Using WireShark's monitor mode, I noticed :
- 802.11 frame are received on multicast group associated with asked IP neighbor solicitation for any kind of address.
It seems that ICMP6 neighbor solicitation are lost between 802.11 frames and IPV6 / ICMP6 stack.
IPV6 firewall is not configured to drop packets.
bash-3.2$ sudo ip6fw show
Password:
65535          0          0 allow ipv6 from any to any
VMWARE Fusion is installed on my Lived MacBook Air 10.8.3 and MacBook Pro 10.8.3.
But tests are made with associated modules not loaded :
bash-3.2$ sudo kextstat |grep -v com.apple
Index Refs Address            Size       Wired      Name (Version) <Linked Against>
Like I said in post beginngin, issue doesn't occurs with ethernet link, only Airport link.
Some one can help me for this strange issue ?
Thanks for your help !
Philippe

Hello,
Thank you for your reply. It would make sense for me if R2 would not receive any packet, but it receives a request and then does not send any reply to NS sent from R1 as I showed in the example. Path to R2 which is a gateway is seen as directly connected on R1:
R1#sh ipv6 ro
IPv6 Routing Table - 5 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
C 2001:1::/64 [0/0]
via ::, FastEthernet0/0
L 2001:1::2/128 [0/0]
via ::, FastEthernet0/0
S 2001:2::/64 [1/0]
via ::, FastEthernet0/0
L FE80::/10 [0/0]
via ::, Null0
L FF00::/8 [0/0]
via ::, Null0
I'm wondering why R2 cannot respond when its own interface has an address that I want to ping (2001:2::1)

Installing Oracle VDI 3.3 into a zone on Solaris x86

Hi everyone,
I'm trying to install Oracle VDI into a zone on an Oracle Solaris Express x86 machine. When I unzip the installer and run ./vda-install in the top dir I get this error:
Oracle VDI 3.3 Installation
+ Installing Oracle VDI Core...
+ Installing Oracle VDI Center Agent...
+ Installing MySQL Database...
+ Installing Oracle VDI Web server...
+ Installing Oracle VDI Manager...
+ Installing RDP Broker...
+ Installing Sun Ray Client...
+ Installing Java Runtime Environment...
+ Installing Sun Ray Server...
Error: There was a problem installing Sun Ray Software 5
Check '/var/sadm/install/logs/vda-install.2011_08_26_19:19:04.log' for details.
Error: There was a problem installing Sun Ray Software 5
Check '/var/sadm/install/logs/vda-install.2011_08_26_19:19:04.log' for details.
It seems that I cannot install Sun Ray Server into a non-global zone. Well that's fine by me provided I don't actually need it.
And her's my question: what of the above do I actually need?
Günther

I guess, it's clear that you need a valid support contract for your Hardware, otherwise your in troubles. A not so bad article about that you kind find at http://www.ypass.net/blog/2010/04/solaris-licensing-changes-the-real-story/
4.) When you purchase hardware, you receive an addendum to the entitlement that grants that piece of hardware perpetual, non-transferable license and entitlement to Solaris.
and additional ...
Sun Servers with a Support Contract
- For people running Solaris on Sun hardware with a Sun hardware support contract, your support contract grants you rights to run future versions of Solaris.

Attempting to install version 8 on solaris x86

The installation fails with:
ERROR exception while configuring command-line utilities
not enough space
The installation claims to require 236 megs. The disk has 2.3 gig free

So, how large is the swap partition? In my experience, default swap size values set by Solaris end-user configuration installation are usually good enough for end-user desktop system but not for developer's environment where you usually run some sort of server and/or IDE and it is usually good idea to increase default swap space values
Just as a reference value, I remember having similar issues installing Application Server 8 on a Solaris system with 560 MB swap space and 128 MB RAM and installation would go through only if /tmp was perfectly clean and system was running only bare bones processes. Since this is fresh Solaris installation, I would recommend reconfiguring the system with at least 1 GB of swap space - that would give you a nice margin if this system is to be used for J2EE development or production.

Solaris 10, local zone & vcs

Hi,
Anybody tried running vcs from within a solaris 10 sparse local zone?
We currently have two T2000' s each running Solaris 10 6/06. I've installed Veritas Foundation Suite 4.1 on each and configured vcs. The cluster is functioning with failover enabled & tested. (I have a test service group running consisting of a 'hello world' program sitting on a VRTS volume/diskgroup on a SAN). This is all running fine in the Global Zone.
As part of our requirement we want to be able to run vcs from within a local zone, hence my creation of a sparse zone. I would like full clustering functionality running from within a zone on one server with failover/switching to an equvialent zone on the the second server.
I have played with the 'zone' option when setting up service groups but not surprisingly this is for switching the whole zone. Not what I want to do.
Am I failing to grasp this whole sparse zone idea? or am I missing something obvious, trying something that cant be done? Any help, particularly from somebody else thats tried this would be appreciated.
Thansk in advance,
Mark

Hello,
I can't help you a lot, but i have found that there is a lot of things that a local zone can't do when it comes to "kernel" things. As of today i found that you do NFS from a zone, for example.
As your problem seems to be related to filesystem it is probable that you can't do it from a zone. Again, i'm not sure.

Create zone in Solaris 10 SMC 3.6 Client

Hi,
I have 2 solaris 10 server. 1 acting as smc server and the other one as smc client.
In smc server, I install smc srv sw 3.6, agent 3.6, container manager in sol10 global zone, no agent yet in local zone
In smc client I install I install smc agent only in global zone
I can create new zone in smc server by login as admin (member of esadm group)
My aim is to enable create new zone in the client thru container manager web based GUI port 6789.
no admin a/c in the smc client, neither esadm group
PROBLEM:
Can't create new zone. The error msg is ask me to check zone log, but zone is not created yet.
I think this because smc agent didn't have enough privilege to create a new zone in the client
Do I need to create admin user and esadm group in every client that I want to add new zone?
What steps is miss in the client side?
thanks
INFO:
SMC version 3.6
SERVER: SF240 2GB RAM 18GB HD and 1 local zone
CLIENT: SF240 2GB RAM 73GB HD and 2 local zone

These what I got too in web container smc client server side
-when try to boot solaris 10 client local zone
ErrorThere was an error while booting the zone. Check the log file for more details.
SNMP request returned error status 6 (no access) snmp://pink.example.com:1161/mod/scm-container/Zones/ZoneTable/ZoneEntry/zoneState#mail
-when want to check client local zone log
tail: cannot open input
INFO:
in REMOTE smc 3.6 client only have admin user (this admin is an user that use to login to web container). no esadm or esdomadm group
in SMC SERVER has admin user, and it also member of esadm and esdomadm group
I think something related to smc didn't have enough privillege in the client side

Solaris 10U1 needs to be to patched to SunUC 1.0.4 for local zones support

The version of Sun UC integrated into S10u1 does not support systems with local zones configured. This has since been fixed but you first need to patch the system to upgrade to Sun UC 1.0.4. This can be done on a SPARC system as follows:
$ smpatch download -i 121118-06
$ smpatch add -i 121118-06
For X86 the patch is 121119-06.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone fail

Similar Messages

Maybe you are looking for