"Unable to join network" Error since upgrading to 3.0! help

I have a 3g iPhone, and since upgrading to 3.0 i am no longer able to join my home network (or any other for that matter) via wifi. It worked before, currently works for my partners iphone 3g [2.x.x] and ive also had no problems with friends 3.0 iphone joining this network.
I have tried restoring, but no luck!
can i roll back to 2.x.x???
Help please!

Well i tried my carrier and they of course were as helpful as ever!! hehe
wanted me to leave it with them for 2-3 weeks with no loan phone!
i contacted apple phone support, and i have a genius bar appointment. finally an apple store nearby [well 1.5 hrs away] so fingers crossed.
thanks for your help

Similar Messages

  • TS1398 unable to join network error

    my ipad 2 has worked great with my wireless router for months. now i keep getting"unable to join network" error. i have reset the iPad and the router with no luck. the router is working fine any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Unable to join network error constant at home

    IOS6 with latest updates on 1Phone 5. I can never hold wifi at my home on iPhone for more than a few days without getting "unable to join network" Dismissng and resetting with new password never works. Always have to do hard reset to phone & router to eventually reconnect.
    Do not have this phone wityh my iPad (laster version & IOS)
    Wasn't the last software update supposed to fix this widespread issue?

    "Do not have this PROBLEM with my iPad (latest version & IOS)"

  • Unable to join network error message

    I keep getting "Unable to to join network" everytime I try to get on wifi. Even at home...help!

    You could try settings/general/reset/reset network settings

  • Question: New IPad error message "unable to join network" on my home wifi.

    Hi. Bought New IPad and used it on commercial wifi spots like Starbucks, no problem. At home my Linksys sees my wifi network but when I enter password I get "unable to join network" error message. My IPad 2 connects as usual. Same password. No problem.
    I rebooted router and then turned on New IPad. Same result. I re-set network settings to factory. Still get "unable to join network". Tried entering Security Key instead of password. No go.
    Please help. Thanks.

    found answer. Choose "other" network. Put Security Key in box asking for Password.
    For me, entered WPA and Name of exisitng network.

  • Another Iphone topic with unable to join network

    Yes, I have reset the iphone and router
    Yes, I have unsecured the network and was able to join, but once I secured it...I get the unable to join
    Yes, I have updated the firmware and cycled the power on my WRT54GS
    Yes, I have tried lower case letter in the password
    Yes, I have created a static IP and entered the information
    Yes, the security on the WRT54GS is WPA
    Yes, I have check to see if the wireless channel was in 1 or 11
    Anything else??

    Dingle, I currently share your problem; however... I was able to login to networks ONCE. The first time. The phone was new (just got it a few days ago), and I joined the network at work, and one in another office. Happy connects. Successful connects. Never again though. Now I get the 'unable to join network error' consistently when I try to join these very same networks. I have reset my network settings. Turned off 3G capabilities (since it's another thing that I've noticed changed since those few early days of new phone, that is, I noticed 3G receptivity is on all the time now with high bars, although when I first got the phone I got ATT, E, the dot, and 3G... they all took turns). The error remains. I wonder if it's an app that I may have installed. I also just connected the phone to my Mac for the first time, but that was post 'unable to join network' error. webapp?? Could it be a memory issue? I don't even know how to refresh cache (or if one even exists).
    Message was edited by: sandraqu
    Message was edited by: sandraqu

  • Trying to connect to a known internet connection but i keep getting the response "unable to join network"

    Trying to connect to a known internet connection but I keep getting the response "Unable to join network" and the internet is connected, please help.

    Okay now this description was pretty vague but it could be a few things. First thing to try. Turn wifi off and then one again and try to connect. If this fails read on.
    The second step is to select that network in the wifi settings so you get an expanded menu of it. Follow these steps from the home menu on your ipad... SETTINGS>Wi-FI>NETWORK NAME (you have to click the little blue arrow)> FORGET THIS NETWORK. Then turn wifi off and then on. Then try to connect again. If this fails... well read on,
    Okay, so now you really know it's most likely not your ipad, so go on down to your wifi router and turn it off, wait ten seconds, turn it on again. WITH YOUR IPAD OFF. Then turn on your ipad on and then try to connect again. If this fails... Then you'll have to do some more complex things. You could try setting up the network again. IF that fails too. Leave some details about your router, brand, year etc... And I'll try to let you know what else it could be.

  • Firmware 2.0.2 Ramifications: "Unable to Join Network"

    It seems like ever since I put 2.0.2 on my 3G iPhone WiFi problems have suddenly entered the picture. I'm usually connected to my home WiFi network via a Belkin N1 Vision router. Ever since the 2.0.2 upgrade the WiFi connection gets repeatedly dropped/blocked. What I mean by that is that when I wake my phone up to use it, it doesn't connect to what was previously a working WiFi connection. When I dig into the available WiFi networks list and select my home network I get the "Unable to join network" alert. My only recourse is to restart the router.
    This happens multiple times a day and it's bugging the crap out of me. Is anyone else experiencing this behavior? More to the point, does anyone have a solution short of continually restarting the router?

    Rohan Thompson,
    Have you tried resetting network settings on the iPhone yet? To do so, just navigate to Settings > General > Reset > Reset Network Settings.
    If the issue persists beyond that, I would recommend restoring the iPhone and setting it up as a new phone. More information on that can be found here: http://support.apple.com/kb/HT1414
    Hope this helps,
    Raleigh

  • Always able to access wi fi except one says unable to join network

    Says I am unable to join network doesn't give me the password box just says unable to join network

    It may be that the battery is the issue. I am having the same problems - unable to log in to my WIFI at home, which I have never had an issue with until yesterday, when I started getting the "Unable to access XXX network".
    I have tried everything including full iphone restore and router factory restore, but nothing. I did note that after having the phone switched off overnight, I was able to access my wireless network for about fifteen minutes then it just dropped the connection and now I am back to no access whatsoever.
    Take a read here:
    http://www.applesource.com.au/iphone/soa/iPhone-Wi-Fi-failures-caused-by-battery -heat-/0,2000070787,339295984,00.htm
    It is one of many internet postings on this issue and would make sense of the posting above mine..
    I'm going to try reverting to 2.2.0 - people such as Leo Laporte on Macbreak Weekly have been complaining of battery issues since upgrading to 2.2.1

  • 8gb 4th generation ipod touch is unable to join network

    This started a couple days ago after I unplugged and re-plugged my router. The internet works fine on the computer, and on everyone else's phone in the house, but not on my ipod touch. I've tried resetting the network settings (multiple times), and unplugging my router while waiting 30 seconds or so to plug it back in. I do not think it is a password issue because I've entered my correct password multiple times as well and I only receive the "Unable to join the network ____", even when I input the incorrect password so I could test it, it resulted in me getting the "unable to join network" notification again. I don't know what else I can do to fix this problem and I would really appreciate some help on this issue.

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Everytime i try to connect to wifi it says unable to join network

    Everytime I try to connect to my wifi it says unable to join network, my iphone did this to but then I had my router firmware upgraded. So it shouldnt be that.

    If you are unable to select Forget This Network for the network on your iPad, go to Settings > General > Reset and select Reset Network Settings. This will erase all wi-fi network settings from your iPad for every wi-fi network you have connected your iPad with.
    If no change after this, do you connect your iPad to any other wi-fi network besides your own? If so, any problem connecting your iPad with any other wi-fi network?

  • Unable to join network on Iphone5

    sudenly my iPhone 5 gives this message "Unable to Join the network ..." when i try to join my WiFi at home. i tried resetting the router, rest the network settings on my iPhone, but still get same error message.

    This might work for some of you. I'm pretty sure most of these issues are caused by the type of Wireless Security and the Radio mode of the router. I had to rule out a lot of enviromental factors to get my problem fixed—type of case, the walls or how I was holding the phone.
    I had 2 random problems with the WiFi of my iPhone 5 (6.1.3):
    • "Unable to join network ..."
    • If it did connect, it had a very poor ping+up/down speeds (lots of Speedtest.net results)
    My home network setup:
    • 2nd gen Airport Extreme (7.6.3)
    • Wireless Security: WPA/WPA2 Personal
    • Network extended with an Airport Express (7.6.3)
    • Radio Mode: 802.11n (802.11b/g Compatible)
    • Radio Channel: Auto
    • Location: AEBS is in the basement and the Express is on 2nd floor.
    • Router Mode: DHCP & NAT with a 365 days for the lease on each IP
    • The Airport Express is setup to "Extend a wireless network"
    I have 2 other iOS 6 devices and 3 other Macs which have no problem connecting to the above setup. The iPhone 5 on the other hand either couldn't connect or when it did, it would have a very poor connection. It always forced me to switch to LTE.
    After many months of putting up with this problem on my phone, I finally gave up and booked an appointment at the Apple store. They wiped the phone and did the usual test with the Apple store WiFi which is freaky fast. The phone had no problems using their open network—both before or after the wipe. I was pretty disapointed after wasting 2 hours of my day.
    I came home hoping the problem had gone away. Nope. "Unable to join ..." ARGHHhh... One of the solutions that people have suggested is to switch to an unsecure WiFi. That's not heppning here. So, I decided to play around with the settings and see what works and this is what FIXED my problem:
    • Radio Mode: 802.11n only (5GHz)
    • Wireless Security: WPA2 Personal
    That's it. After the reset of both the base station and the Express, my iPhone 5 has been connected for a few hours without any problems. I've tried disconnecting and re-connecting a few times and so far so good. I hope this works for some of you.
    Message was edited by: redjeko. Added iOS version.

  • Ipad unable to join network

    iPad mini, using my network just fine for several weeks now.  Was having a problem with online games loading, so went to wi-fi settings and clicked "Renew Lease".  Now I can no longer connect.  Keeps telling me "unable to join network".  Laptop connects fine.  Turned iPad off, forgot network, nothing works.

    Usually it's because you are not connecting to the internet via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Wi-fi working on other devices.  When trying to connect on ipad it states"unable to join network".  Some of my efforts have resulted in short term connection, but then I lose it again.

    anybody have any idea what would cause my wi-fi to state "unable to join network when all other devices are haveing no connection problem.?

    Try the remedies that are in this Apple support document on troubleshooting Wi-Fi.
    http://support.apple.com/kb/TS1398

  • Iphone 5 wifi unable to join network

    iphone 5 wifi unable to join network issue
    I am an engineer and I have tried every tweek to my airport router and unles you are standing 10ft from the ruter you get the  unable to join network messsage.
    naturally it work fine at the Apple Store who preformed a full reset on the phone. Other people are having this issue same a me and apple chooses not to acknowledge it, Maybe they will when I contact the consumer journalists at CNN ABC CBS & NBC news they love to here about Apple problems remember the Iphone 4 antenna issues!
    APPLE ARE YOU PAYING ATTENTION!!!
    AT LEAST ACKNOWLEDGE THIS PROBLEM AND SAY YOU ARE WORKING ON IT.
    THINKOF IT THIS WAY
    PEOPLE ARE GETTING PHONES EXCHANGED OUT AT APPLE STORES AND THE CARRIERS ONLY TO FIND THAT CHANGING THE PHONE DOES NOTHING REGARDING THIS ISSUE. THIS IS COSTING YOU MONEY AND WASTING YOUR STORE PERSONNELS TIME TROUBLESHOOTING A PROBLEM THAT ONLY THE HOME OFFICE CAN FIX!

    Dear Engineer...Apple does not read these posts.  We are end users just like you

Maybe you are looking for

  • HP Officejet Pro L7580 not recognized and unable to install

    Hello everyone, We purchased a MacBook Pro and for sometime we had it connected to our HP Officejet Pro L7580 using its usb connection.  This MacBook Pro is running Mountain Lion software with the current printer update.  We moved and relocated our p

  • Start host process from within guest OS

    I am using VMWare Workstation 10. Some of my vm's are dedicated to compiling code using CruiseControl.NET. What I am attempting to do is add a step that automates testing a completed setup on several clean virtual machines. From what I can see, the g

  • Convert pdf file (vendor order confirmation) to excel for use as a worksheet

    anyone ?  can you help me?  I keep getting an error message but not what is wrong

  • Error: Unable to find matching navigation case

    Hi all, after I wrote this thread: ui:include if I pass a variable, some one can tell me some tips? I do some step forward and now the application returns this error: Unable to find matching navigation case with from-view-id '/include.xhtml' for acti

  • MacBook Pro 15" i7 will not boot

    My brother just ordered and received the i7 2.66GHz model of the 15" MBP. He had the previous 2009 unibody MacBook Pro. Rather than migrate the older HD to the new one and re-enter his serial numbers for many of his 3rd party apps, he opted to pull t