Server Start Page corrupted
Bought the mac mini server and set up the Lion server. Everything was fine and then boom....message said:
Apache/2.2.19 (Unix) mod_ssl/2.2.19 OpenSSL/0.9.8r DAV/2 Server at XXXXX
/Index
So I reinstalled Lion....not clean install. And it now allows me to see the default server start page except non of the icons.
I'm very new to the sever...though very familiar and competent with systems up to snow leopard.
Thanks for any insight you can provide.
Check out /etc/apache2/ReadMe.txt. At the very bottom are instructions to reset the config:
To restore the default configuration, from Terminal app:
sudo /System/Library/PrivateFrameworks/ServerFoundation.framework/Resources/xswebcon fig restorefactorysettings
I recommend turning the web server off, running that command, and then turning it back on.
Hope this helps.
Similar Messages
-
Weblogic server starting pages.
Hi! I have ADF app. I deployed it! All is ok when I had index.html page. When I entered address and app worked. But now I have indes.jspx page. And when I enter address then I have error:
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Where to configure in weblogic or somewhere else? Can you say in details, I cant find it!
Best regards!Hi! I created index.jspx page. In my app web.xml file I defined:
<welcome-file-list>
<welcome-file>index.jspx</welcome-file>
<welcome-file>default.jspx</welcome-file>
</welcome-file-list>
And deployed app to WeblogicServer but then I had error:
Error 500--Internal Server Error
java.lang.RuntimeException: Cannot find FacesContext
at javax.faces.webapp.UIComponentClassicTagBase.getFacesContext(UIComponentClassicTagBase.java:1851)
at javax.faces.webapp.UIComponentClassicTagBase.setJspId(UIComponentClassicTagBase.java:1668)
at jsp_servlet.__index_jspx._jspService(__index_jspx.java:109)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:149)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
When I used index.html there was no problems! Why and what to do?
Best regards! -
Unable to load forms Application Server starting page as comprd to earlier
I have insatalled my Allication in Forms Application server 10g and it was running succesfully up to yesterday.
All of a sudden my application got slow down,and it is taking more time to load my first page(say Logon.fmx).
Clearly to say a pop like "oracle Application Server Forms 10g" is displaying for more time rather than skipping to my Logon.fmx.
pls helpI saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas -
"Exception Processing Message" error when clicking the Accessing Server Data link on the start page
When I first started the application, I click the Accessing Server Data link on the start page. I immediately got the error "Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c in a dialog box titled "Windows - No Disk". I had to used Task Manager to remove the box after closing Flash Builder 4. I then tried the video tutorial on "PHP Services in Flash Builder 4". I keep receiving an error during service introspection trying to connect to the PHP class. It was the same error as the other individual "Cannot Connect to PHP Service". So I tried another tutorial and generated a sample PHP class. I moved a datagrid on to the stage, droped in the getAllItems function, and configured the return type. However, when I ran the app, I received the same error "Exception Processing Message" again. I have attached the screenshot of the error in addition to my phpinfo and log files.
"The exception process message" is definitely a issue. Is it happening consistently, if so can you file a bug at bugs.adobe.com/flex and give out your machine config details, and the error log.
With regards to generating a new php file and the introspection error that you are getting, looking at the logs it probably is two fold.
First off the name of the file and the class name should be the same, are you having employeeServices as the name of the class in employeeServices.php file.
Second, It seems prior to generating this new file, you had a syntax error at line 5.
It would be easier to figure out what the error is, if you can also attach the php file, by removing any sensitive information in that.
Hope this helps.
Thanks
-Sunil -
Flash Start Page has Corrupted graphic
Does anyone else see this? The "Start Page' that is displayed
after launching Flash Professional 8 displays a white rectangular
graphic in the upper left-hand corner that covers up the red
banner. The graphic is all white excpet for the reddish-orange
flash "F" symbol. It's as if it is downloaded because there is an
instant before it is displayed that I can see the Flash
Professional banner that's underneath. Not really a functional
problem but somewhat annoying to look at.I also have this problem with the Fireworks start page. But,
it does have a message which states, "Problem Loading the content
XML. You've requested a language which does not have any available
content." A few months ago I had the trials installed with no
problem. It was when I used the actual program when this
happened. -
Mac Mini Server HDD is corrupt and ...
I was using Disc Utility Repair/Verify on Server HDD to fix issues with the drive and it gave me the following:
Volume Server HDD found corrupt and needs to be repaired. Reformat disc and restore back up files.
This is a Mac Mini model A1347. Every time I start the machine, it opens with the Disc Utility page with the options to use:
Disc Utility
Access the Internet for Help
Download a new version of the OSX
Restore from Time Machine
I have tried all of these options and when I try the suggested fix, it always results in an error preventing the fix. I have most of the files from the Server HDD saved, so if I have to reformat it, it isn't a big deal.
What is my best option?
Thanks
-MikeIIIaass, I'm sure you are right, and it is something I need to keep an eye on.
I'm hopeful that it is up and running again, but skeptical about it at the same time because it seemed to come around after enough tries.
Though as a novice Mac user, it could be that I finally did everything right instead of haphazardly trying things?
In any event, I'll keep backing up my work and if I start to see anything crazy start up again, I'll know for sure. What should I be looking for prior to the Utilities window cycling over and over?
Thanks again. -
My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
I'm out of ideas. Is there something else to try?Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars -
SMC 4.0 doesn't show correct start page after the installation
Hello,
after installing SMC 4.0 in a Solaris 10 sparc server it is not possible to get the start page at http://host:6789
I just get in the browser:
usage: head [-n #] [-#] [filename...]
Copyright � 2007 Sun Microsystems, Inc. All rights reserved. U.S. Government Rights - Commercial software. Government users are subject to the Sun Microsystems, Inc. standard license agreement and applicable provisions of the FAR and its supplements. Use is subject to license terms. This distribution may include materials developed by third parties.Portions may be derived from Berkeley BSD systems, licensed from U. of CA. Sun, Sun Microsystems, the Sun logo, Java, Netra, Solaris, Sun Ray and Sun StorEdge are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
more details:
# svcs -a|grep web
disabled 8:30:48 svc:/application/management/webmin:default
disabled 8:30:49 svc:/system/webconsole:console
online 8:31:53 svc:/application/management/sunmcwebserver:default
# cat /etc/release
Solaris 10 8/07 s10s_u4wos_12b SPARC
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
root@jumpstart:/ # es-validate
This script will help you in validation of Sun (TM) Management Center.
Validation Tool Version : 4.0
Host name : jumpstart
Number of CPUs : 2
Platform : SUNW,Sun-Fire-V215
Operating System : SunOS 5.10
Memory size : 6144 Megabytes
Swap space : 1154008k used, 8156008k available
JAVA VERSION : "1.5.0_12"
Sun Management Center Production Environment Installation.
Following layers are installed : SERVER, AGENT, CONSOLE
Installation location : /opt/SUNWsymon
Sun Management Center Add-Ons and Versions:
PRODUCT VERSION
Production Environment 4.0
Advanced System Monitoring 4.0_Build15
Service Availability Manager 4.0_Build15
Sun Fire Entry-Level Midrange S 3.5-v6
Netra 3.6
Performance Reporting Manager 4.0_Build15
Solaris Container Manager 4.0_Build15
Sun Fire Midrange Systems Domai 3.5-v6
Dynamic Reconfiguration for Sun 3.5-v6
Sun Fire Midrange Systems Platf 3.5-v6
System Reliability Manager 4.0_Build15
Workgroup Server 3.6
Generic X86/X64 Config Reader 4.0_Build15
Sun Management Center Patch installation details:
No Sun Management Center patch is installed.
Sun Management Center disk-space consumption:
PRODUCT APPROXIMATE DISK SPACE CONSUMED
Production Environment : 54452 kB
Advanced System Monitoring : 2391 kB
Service Availability Manager : 1838 kB
Sun Fire Entry-Level Midrange S : 1738 kB
Netra : 2005 kB
Performance Reporting Manager : 3371 kB
Solaris Container Manager : 3688 kB
Sun Fire Midrange Systems Domai : 1718 kB
Dynamic Reconfiguration for Sun : 303 kB
Sun Fire Midrange Systems Platf : 3270 kB
System Reliability Manager : 970 kB
Workgroup Server : 3707 kB
Generic X86/X64 Config Reader : 608 kB
TOTAL : 80059 kB
Database is located at : /var/opt/SUNWsymon/db/data/SunMC
Free space available on this partition is : 2447579 kB
Following locales are installed :
Information about upgrade from old versions is not available.
Sun Management Center Ports:
SUNMC COMPONENT PORT_ID
agent service 4800
trap service 162
event service 163
topology service 164
cfgserver service 165
cstservice service 167
metadata service 168
platform service 166
grouping service 5600
rmi service 2099
webserver_HTTP service 6789
webserver_HTTPS service 8443
Sun Management Center Server Hosts definitions in domain-config.x:
SUNMC COMPONENT SERVER_HOST
agent service jumpstart
trap service jumpstart
event service jumpstart
topology service jumpstart
cfgserver service jumpstart
cstservice service jumpstart
metadata service jumpstart
platform service jumpstart
Sun Management Center Processes:
SUNMC SERVICE STATUS
Java Server Running.
Database services Running.
Grouping service Running.
Event-handler service Running.
Topology service Running.
Trap-handler service Running.
Configuration service Running.
CST service Not Running.
Metadata Services Running.
Hardware service Not Running.
Web server Running.
Sun Management Center Agent Running.
Platform Agent Not Running.
Privilege level for Sun Management Center users :
CATEGORY USERS
esadm : smcadmin
esdomadm : smcadmin
esops : None
ALL USERS : smcadmin
server is local host
Web server package is installed correctly.
Web Server is up and responding.
Web Server servlet engine is up and responding.
Validation tool Log file is : /tmp/validation_jumpstart.080613084452.17073What is going on here?
Any help is really appreciated.
-- Nick@sachint
I tried your suggestion, but I still have the same situation. Unfortunately.
I see -
# svcs -vx
# svcs -a|grep web
root@jumpstart:/ # svcs -a|grep web
disabled Jun_13 svc:/application/management/webmin:default
disabled 18:39:06 svc:/system/webconsole:console
online 18:40:02 svc:/application/management/sunmcwebserver:default
# cat /var/svc/log/application-management-sunmcwebserver:default.log
[ Aug 6 18:39:51 Enabled. ]
[ Aug 6 18:39:51 Executing start method ("/lib/svc/method/es-svc.sh start webserver") ]
Web server started successfully.
[ Aug 6 18:40:02 Method "start" exited with status 0 ]
# svcs -p application/management/sunmcwebserver
STATE STIME FMRI
online 18:40:02 svc:/application/management/sunmcwebserver:default
18:39:53 27621 java
# telnet localhost 6789
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.If I truss the java process, I see something like -
# truss -edalf -rall -vall -wall -o /tmp/jumpstart.out -p 27621
# less /tmp/jumpstart.out
27621/28: 9.9421 write(7, 0xB02FCEA0, 498) = 498
27621/28: 2 0 0 8 - 0 8 - 0 6 1 8 : 5 3 : 3 1 H t t p P r o c e s s o
27621/28: r [ 6 7 8 9 ] [ 3 ] p r o c e s s . p a r s e\n j a v a . i o
27621/28: . I O E x c e p t i o n : C o u l d n ' t r e a d l i n e
27621/28: \n\t a t o r g . a p a c h e . c a t a l i n a . c o n n e c t
27621/28: o r . h t t p . S o c k e t I n p u t S t r e a m . r e a d R e
27621/28: q u e s t L i n e ( S o c k e t I n p u t S t r e a m . j a v a
27621/28: : 2 3 5 )\n\t a t o r g . a p a c h e . c a t a l i n a . c o
27621/28: n n e c t o r . h t t p . H t t p P r o c e s s o r . p a r s e
27621/28: R e q u e s t ( H t t p P r o c e s s o r . j a v a : 7 1 0 )\n
27621/28: \t a t o r g . a p a c h e . c a t a l i n a . c o n n e c t o
27621/28: r . h t t p . H t t p P r o c e s s o r . p r o c e s s ( H t t
27621/28: p P r o c e s s o r . j a v a : 9 7 4 )\n\t a t o r g . a p a
27621/28: c h e . c a t a l i n a . c o n n e c t o r . h t t p . H t t p
27621/28: P r o c e s s o r . r u n ( H t t p P r o c e s s o r . j a v a
27621/28: : 1 1 2 5 )\n\t a t j a v a . l a n g . T h r e a d . r u n (
27621/28: T h r e a d . j a v a : 5 9 5 )\n\n
27621/28: 9.9445 send(18, 0xB02FE768, 159, 0) = 159
27621/28: H T T P / 1 . 1 4 0 0 B a d R e q u e s t\r\n C o n t e n
27621/28: t - T y p e : t e x t / h t m l\r\n C o n n e c t i o n : c
27621/28: l o s e\r\n D a t e : W e d , 0 6 A u g 2 0 0 8 1 6 :
27621/28: 5 3 : 3 1 G M T\r\n S e r v e r : A p a c h e T o m c a t
27621/28: / 4 . 0 . 5 ( H T T P / 1 . 1 C o n n e c t o r )\r\n\r\n
27621/28: 9.9448 ioctl(18, FIONREAD, 0xB02FF34C)
...I have no idea what is happening here.
-- Nick
Edited by: der_niki on Aug 6, 2008 9:56 AM -
Control panel added to start page
On Windows 8.1 and Server 2012R2 I can add a link to the control panel and the command prompt to the start page.
couldn't see that I was able to do that in Windows 10 tech previewOn Windows 8.1 and Server 2012R2 I can add a link to the control panel and the command prompt to the start page.
couldn't see that I was able to do that in Windows 10 tech preview
You do not say which Win 10 TP build you are now using.
If you are using one of the latest, i.e. 10041 or 10049, you might not need a link to Control Panel or Command Prompts in Start Menu screen.
Right click at Start button > the popup box gives you a list which, among others, includes Control Panel link and 2 Command Prompt links.
Adding.....
Slightly off topic: when you login to your account, it opens to the desktop. Right ?
So, wouldn't it be more convenient to create shortcuts to desktop ? -
JHS 10.1.3 Internal Server Error - Page when a view raises an exception
I have a view with some logic (based on a table function) and created: entity object, view object and (jhs) an advanced search page. When the view raises an exception an "500 Internal Server Error"-page is showed, but I expected the error would be showed in de messages-component.
I created a test case: a view on employees-table with in the select a function that raises an exception when last_name starts with "L". On this view an entity obejct, a view object and application module.
I generated with JHS a page : layout: table and only advanced search.
The first time the page is loaded (with auto query) some records are showed and the exception is showed as expected in the message-component. When I do a search (without criteria) the "500 Internal Server Error" pages is showed.
When I create manual a search page, the behavior is as expected.
(see below for error stack)
Greetings, Frank
"500 Internal Server Error"-page :
javax.faces.FacesException: #{searchVEmps.advancedSearch}: javax.faces.el.EvaluationException: oracle.jbo.RowNotFoundException: JBO-25060: Er is een onverwachte fout opgetreden bij het ophalen van de volgende rij uit JDBC ResultSet voor verzameling VEmps.
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78)
at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.faces.el.EvaluationException: oracle.jbo.RowNotFoundException: JBO-25060: Er is een onverwachte fout opgetreden bij het ophalen van de volgende rij uit JDBC ResultSet voor verzameling VEmps.
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72)
... 27 more
Caused by: oracle.jbo.RowNotFoundException: JBO-25060: Er is een onverwachte fout opgetreden bij het ophalen van de volgende rij uit JDBC ResultSet voor verzameling VEmps.
at oracle.jbo.server.QueryCollection.hasNextInResultSet(QueryCollection.java:3103)
at oracle.jbo.server.ViewObjectImpl.hasNextForCollection(ViewObjectImpl.java:3650)
at oracle.jbo.server.QueryCollection.hasNext(QueryCollection.java:2992)
at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2207)
at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
at oracle.jbo.server.QueryCollection.getRowCount(QueryCollection.java:1821)
at oracle.jbo.server.ViewRowSetImpl.getRowCount(ViewRowSetImpl.java:1933)
at oracle.jbo.server.ViewObjectImpl.getRowCount(ViewObjectImpl.java:5918)
at oracle.jheadstart.controller.jsf.bean.JhsSearchBean.executeAdvancedSearchBinding(JhsSearchBean.java:326)
at oracle.jheadstart.controller.jsf.bean.JhsSearchBean.advancedSearch(JhsSearchBean.java:214)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
... 28 moreCould you send your testcase to [email protected]? Rename extension .zip to something else (.zipped for example)
Thanks,
Steven Davelaar,
JHeadstart Team -
Unable to access E-Recruiting Start Pages Externally
Hello,
Im hoping for some assistance with an E-Recruiting issue (standalone system; Version 3.0). We are currently only able to access the start pages while inside of our network, and receive a page cannot be displayed message while outside of our network. This is with the exception of the candidate registration page. We can successfully register, and then pass on to the main E-Recruiting start page for an external candidate.
The hrrcf_start_int bsp/service is used to call the start page for registered internal candidates, recruiters, and administrators (different view for each). The hrrcf_start_ext bsp/service is used to call the start page for registered external candidates. And, the hrrcf_cand_reg bsp/service is used to access the external candidate registration page.
The URLs for the start pages were created using program RCF_GENERATE_URLS. We are requiring all traffic be routed through our WebDispatcher, and all traffic be HTTPS, so the URLs start out with https://recruiting.... Our E-Recruiting system is actually careers, but again, we want all traffic to go through our WebDispatcher, which is recruiting.
We have created external aliases in transaction SICF for all three URLs, and using the alias, I can successfully login to all pages within our network. When I test the external aliases within SICF, I get an internal error (The user is not assigned a candidate or an employee) for the hrrcf_start_int and hrrcf_start_ext services. When I test the external alias for hrrcf_cand_reg, it is successful.
When I test the hrrcf_start_int service within SICF, I get the logon page, but after logging on, I get message Name of logical port&&lp_named is invalid. When I test the hrrcf_cand_reg service, it is successful.
When I test the hrrcf_start_int and hrrcf_start_ext BSPs in SE80, I receive an Internet Explorer cannot display page message. The same is true for the hrrcf_cand_reg. However, it is trying to access http://recruiting instead of https://recruiting. I can see that URL address in the application.do Controller, but have no idea where to change it, because it is greyed out (any help with this would be appreciated as well.)
We have created internal users using program RCF_CREATE_USER, and when I look at transaction BP, I see that it is creating a business partner for each user.
We have had SAP tell us that it is not a WebDispatcher issue, and we have also confirmed that it is not a firewall issue.
It seems interesting to me that we can only get to the one page that does not first require authentication. If anyone has any information that would be helpful, I would appreciate your time.
Sorry for such a long message, but I was just trying to be as clear as possible.
Thank you,
Leeanna TravisHello Leeanna,
quite a lot of topics and doing remote analysis for netwok issues is difficult.
Some ideas:
- starting hrrcf_start_ext / hrrcf_start_int via SICF or SE80 will never be successful as these applications need parameters. The message you got when testing startpage from SICF is classical for invalid startpage Id
- if you do not reach pages from outside, check network traffic / access rights in firewalls. Usually the sap server name cannot be resolved through a dns for an outside call as you companies dns is not visible for internet users. You will need a relay.
- check that full qualified server name is set on the server
- check eeb infrastructure that it allows the access protocoll. If ICF service says http but firewall only allows https you won't get a responde. Sometime switching protocolls within the request produces problems.
- WebDispacher is known for eating parameters / url parts. Try to get your hands on the traces of the requests which really reach the server.
- if possible supply some more information on release & support package level. E.g. there is a support package which has an error that if you activate 'do not show https warning' in an icf service it does not only hide the warning but the whole logon screen :o(
Hope that helps, if not just reply - perhaps w/ focus on one special point.
Best Regards
Roman Weise -
How to change standard start page of AS Java
Dear experts,
could you please tell me - is it possible to change the start page of the SAP J2EE server (which is shown when you go to the http://<server name>:50+<system number>*100 page -
SAP Help Portal, System information, User Management etc.)?
Is it possible to change it to the customer page?
I thought it is connected with HTTP provider service, but the root directory pointed where
doesn't exists in the server (.../j2ee/docs),
so I don't understand, from what source the standard page is retrieved and shown to the user.
Thanks a lot!
Andrey.Hello Ventsi,
thanks a lot for clearing of the situation.
In fact we have a question - how to show the static web page which is stored on the J2EE server instead of the standard index.html. It is not an application, but simple html page.
In HTTP provider help we can see the following lines -
Root Directory
The root directory for this host. The installation program does not create the main directory for the HTTP files automatically. It must be created additionally, or the path must be redirected to an existing directory.
Value ../../docs
Start Page
This page is displayed when the browser establishes a connection with the host. The server searches the root directory for a file that appears in the Welcome Files list. The first match found is returned to the client browser.
So does it mean that we have to create docs directory manually and put our file into this directory?
Or it is the wrong approach?
Thanks!
Regards,
Andrey. -
APEX 2.2 starting page.
Hi All,
I install oracle application express on linux es4 with out any issues.
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
my opmn status is
[oracle@abc bin]$ ./opmnctl status
Processes in Instance: standalone
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 30188 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
my http://localhost:7777/ is working fine. but my starting page for apex is show error message.
url : http://localhost:7777/pls/apex
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at abc Port 7777
where to check the errors. Please help meI found the problem. According to installation doc we need add an "include" entry of dads.conf in httpd.conf. Once I removed that entry ever thing is working fine. I don't know the document is wrong or some thing else?
Another questions.
1. Can any one guid me where to start the development.
2. How to change the default admin passwords including schemas.
3. After installing HTTP server and AE my EM is not starting any help is appreciated.
Thanks, -
Unable to get 10g application server control page
Need Urget help
hi
Operating system windows 2003 with sp1
Application server 10g-- v 10.1.2.0.2
I have installed both 10g application server infrastructure and middle tire sucessfully on the machine with all the components sucessfully installed without any component failure or error.
i can access welcome page on
http://localhost:7777 or
http://hostname.domainname:7777
sucessfully but when i try to login to application server control from welcome page
it directs me to http://hostname.domainname:18100 but doesnot display any page
no error just blank page with status done at status bar.
-- but i can access server control page using
http://hostname.domainname:18100/emd/console
login sucessfully after entering username and paswword
but why i can not access it just by specifiying
http://hostname.domainname:18100 also when i try to start or stop any components no response after pressing stop/start/restart button available.
-- same problem with
http://localhost:7778/forms/frmservlet no button shows any response or any error on configuration or on any other components web page.
i checked all almost every thing
all services or running sucessfully
plz i need ur help.I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas -
Weblogic server start error: java.lang.OutOfMemoryError
Hi:
when i start weblogic server, i met following error !
java.lang.OutOfMemoryError
<<no stack trace available>>
why?
thanks!
starting output as follow :
C:\bea7\user_projects\zhudomain>startweblogic
C:\bea7\user_projects\zhudomain>echo off
CLASSPATH=C:\bea7\jdk131_03\lib\tools.jar;C:\bea7\weblogic700\integration\li
b\wl
pi-worklist.jar;C:\bea7\weblogic700\samples\server\eval\pointbase\lib\pbserv
er42
ECF172.jar;C:\bea7\weblogic700\server\lib\weblogic_sp.jar;C:\bea7\weblogic70
0\se
rver\lib\weblogic.jar;
PATH=.;C:\bea7\weblogic700\server\bin;C:\bea7\jdk131_03\bin;C:\PROGRA~1\RATI
ONAL
\RATION~1\NUTCROOT\bin;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\PRO
GRA~
1\RATIONAL\RATION~1\NUTCROOT\mksnt;c:\Oracle\Ora81\bin;C:\WINNT\system32;C:\
WINN
T;C:\WINNT\System32\Wbem;C:\PROGRA~1\ULTRAE~1;C:\CTEX\MiKTeX\TeXMF\miktex\bi
n;C:
\CTEX\MiKTeX\LocalT~1\cct\bin;C:\Program Files\Rational\common;C:\Program
Files\
Rational\ClearQuest;C:\Program Files\Rational\Rose\TopLink\;C:\Program
Files\Rat
ional\Rational Test;C:\bea7\jdk131_03\bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
C:\bea7\user_projects\zhudomain>"C:\bea7\jdk131_03\bin\java" -hotspot -Xms32
m -X
mx200m -Dweblogic.security.SSL.trustedCAKeyStore=C:\bea7\weblogic700\server\
lib\
cacerts -Dweblogic.Name=myserver -Dbea.home="C:\bea7" -Dweblogic.management.
user
name= -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled= -Dja
va.s
ecurity.policy="C:\bea7\weblogic700\server\lib\weblogic.policy"
weblogic.Server
<2002-11-13 ÏÂÎç04ʱ21·Ö01Ãë> <Info> <Security> <090065> <Getting boot
identity
from user.>
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<2002-11-13 ÏÂÎç04ʱ21·Ö08Ãë> <Notice> <Management> <140005> <Loading
configurat
ion C:\bea7\user_projects\zhudomain\.\config.xml>
java.lang.OutOfMemoryError
<<no stack trace available>>
Hi JLK,
Now as you can see that you are getting "java.lang.OutOfMemoryError: PermGen space" during the activation on an application it means that you are application needs more space in the non-heap part of the JVM which is PermGen to create the Classes, Class Structures, Methods and Reflection Objects of this applications hence you are getting this issue.
Now how to solve this issue you try the following check list which would help you resolve this issue and overcome same type of issue in future
1). Make Sure that the PermGen Area is not set to a very less value.
2). Usually if an Application has Many JSP Pages in that case every JSP will be converted to a *.class file before JSP Request Process. So a large number of JSPs causes generation of a Large number of *.class files all these classes gets loaded in the PermGen area.
3). While allocating the -XX:MaxPermSize make sure that you follow a rough Formula… which works in most of the Application Servers.
MaxPermSize = (Xmx/3) —- Very Special Cases (One Third of maximum Heap Size)
MaxPermSize = (Xmx/4) —- Recommended (One Fourth Of maximum Heap Size
To get more information on this I would suggest you to have look at the below link which would surely help you in this case
Topic: OutOfMemory Causes and First Aid Steps?
http://middlewaremagic.com/weblogic/?p=4464
Regards,
Ravish Mody
Maybe you are looking for
-
hey guys, just purchased this board (see topic) and tried to overclock my 3200+ amd venice core. For some reason i cant get the voltage to go any higher than 1.45 in the bios (or elsewhere), no other options in the menu are selectable, only 1.450 and
-
Motion still fragile after installing it in a MacPro
OK so we've had the FCP update so where is the Motion update. As a Pro user of this software I am very unhappy with Motion as it stands at the moment. I sent a request to Apple as I cannot use Motions keyframes anymore. This has been since I bought t
-
I need to have parallel access to a database from two different application. The first application is a TestStand program that will open this database and then write into the database. This open and write process will occur continuously as new data a
-
/etc/hosts in Snow Leopard: ping works, browsers don't?
I've had success in the past using /etc/hosts to direct web browsers to a test server instead of the production server, but it's not working in OS X 10.6.7. I edit the hosts file: $ sudo vi /etc/hosts Add my entry: # Host Database # localhost is used
-
How SCXI modules are multiplexed into one Channel of the DAQ card?
Hi all, I am Sirisha from Hyderabad. I am a new to NI hardware. take the below mentioned senario. Suppose i am using SCXI-1000 chassis with SCXI-1520 and 3 SCXI-1102 modules and PCI-6070E DAQ card. now i know that if i connect the DAQ card to the SCX