Unable to open and read the full sms on n95 8gb

Hi,
after i upgraded the latest firmware of n95 8gb i am facing wiered problems.
now whenever i recieve a sms i am able to see the sms in my inbox but when i try to open it to read the full message it doesnt do anything.
tried all options but no luck.
Kindly help me..
Rakesh

hi, now problem is resolved.
1. i had just removed all my alarms.
2. set the time zone again
3. took out the sim card and put it again
4. and also ensured that i have proper settings for messages i.e message centre no. n all.
not sure what made it to work but finally its working.
Is your time zone and time set properly after you upgraded the firmware ?

Similar Messages

I have iPhone 4 with newest update and Mac laptop with Snow Leopard and current version of iTunes. When I hook the phone up via USB, iPhoto pops open and reads the pictures for import, but iTunes doesn't do anything. Not seeing the device as a USB, either

Sorry, thought that was the body of the question, so the title is long. When I plug in my iPhone 4 (newest update) into my Mac laptop (current version of iTunes, Snow Leopard), it does not read the music, apps, etc., or open iTunes at all. It syncs the pictures, but it doesn't not show as a USB device, either. I have gone through the Troubleshooting assistant, restarting both comp and laptop, using different USB ports, etc. If it is of note, when I look at the option to Sync through Wifi on the phone, it says that sync will happen when my computer (by name) is "available." Not sure if this is a phone issue or laptop, leaning towards laptop, since iPhoto syncs. Willing to buy Lion if that will fix the problem! I would appreciate any help that is given.
Regards,
Lindsey

cynecasey wrote:
... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
You have written a very long story, and I admit I have skipped most of it. But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
The fact that you chose not to update your hardware does not mean you could not update your software!
OS X 10.5 is very old (about four years). iTunes 11.1.5 (current version) requires at least OS X 10.6.8 to run. Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
You would start here:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2).

I purchased an I book and I can not open and read it. It shows up in my purchases and that it has been downloaded, but I can't open the book.

I am unable to open and read an IBook I purchased-Help??

Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. Stop or resume the download.

How to open and read many files from a directory and store contents in 2D array?

I want to make a VI that opens and reads the data from various files contained in a directory (200 files each with 2 columns) and store these in a single 2D array. For file number 1 I want to store the data from both columns in the 2D array, but for files 2 to 200 I only want to store the second column of each file. Can someone please help?

Hi Nadav,
Thanks for your help. I have followed your instructions but i cannot get it to work. I used the LIST DIRECTORY to list the files in the directory - that works. However, how do I read each of the 200 files using READ FROM SPREADSHEET FILE without me having to manually select each of the 200 files? So, if I use LIST DIRECTORY to list all 200 files in an array, how do I get each of these to open and store the data in a 2D array? Here is what I have done (File called read_files.VI) Could you please help me? Thank you very much in advance.
Attachments:
read_files.vi ‏18 KB

We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it. The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help!!

We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it. The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help!!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

We are unable to open a Pages 5.0.1 document in Pages 4.2 and retain ability to edit all aspects of the document. I have tried saving the 5.0.1 version as Pages '09 and am still unable to open it in the earlier version of pages. Help?

We are unable to open a Pages 5.0.1 document in Pages 4.2 and retain ability to edit all aspects of the document. I have tried saving the 5.0.1 version in Pages '09 but am still unable to open it in the earlier version of pages. Help?

No, it isn't. Pages 5 isn't compatible with Pages 4.3 as it is lacking more than 90 features that Pages 4 has. So when you open a Pages 4 document in Pages 5 only the simplest documents will look the same in Pages 5.
Pages 4 can't open Pages 5 documents at all!! You have to export back to Pages 09 as I said above.
You probably will be more happy if you just use Pages 4 (Pages 09). There are many threads in this forum that describes the lack of compatibility between the two versions. Pages 5 is in my view not Pages anymore.
If you don't desperately need Pages 5 for moving documents over iCloud to new iOs devices don't use it.

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still us

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still use Flash Player...
Is there anyo who can help me with this? I asked in the shop and I was told "yes of course" , but when I contacted Sony directly I was advised to check with Adobe as apparently in the recent months Adobe and Sony haven't been getting along anymore...

You may be mixing up two entirely different Adobe products.
1. Adobe Flash Player. Needed to view web pages designed with Flash. Not needed to view PDF files. Not available for Android (not just Sony).
2. Adobe Reader. Reads PDF files. However, the Android can also read most PDF files without needing Adobe Reader.

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

After I open and read an email how do I get back to email. I am closing the open email then having to go back to the home screen and then reopen the mail app. There has to be a better way.

After I open and read an email using my mail app, how do I get back to the email app to open an read others. I am closing the email open, going back to the home screen and reopening the mail app every time. There's got to be a better way to do this.

If you are using the iPad in portrait mode, swipe from left to right in order to bring up the preview window of your emails again.

HT201342 I have just opened an icloud email address and am unable to open ANY of the messages in my INBOX. I keep getting the message, "Cannot open this item. This operation is not supported until the entire message is downloaded. Download the message and

I have just opened a new icloud email address and am unable to open ANY of the messages in my INBOX. For each item I get the message "Cannot open this item. This operation is NOT supported until the entire message is downloaded. Download the message and try again". I now have no clue what I need to do to open these items. Help please.

What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT

I recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive

i recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive.. is this possible and for how much? its only a week old.

Your 14 days are up, however you could take your case to Apple Inc. regarding same,
however those are the stipulations.
RAM cannot be upgraded however, period, its permanent on the logic board after mfg.
As for the SSD (solid state drive), upgrading same is a bad premise 9 times out of 10.
No notebooks is a mass storage device, and you need an external HD for data redundancy and backups regardless.
data that is static on your SSD and not used very often has no logical reason to be ON the notebooks, and best saved on a superslim external HD ($60)
SSD are very expensive, even a small one, HD are cheap as dirt and users are recommended to have one regardless for many good reasons.

When I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

when I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

Hi fabiangs,
I'm not sure that I follow. Are you saying that when you open a PDF file in Acrobat or Reader, that the display resolution changes automatically on your system?
What version of Acrobat/Reader are you using? Do you see this same issue in other files/applications?
I look forward to hearing back from you.
Best,
Sara

Error message" The file may be damaged or corrupted -1610153464/ also unable to open projects in the background 26:: 142

Hello everyone,
I hope someone can help me.
I am using AE CC/Windows 7 on a Dell computer, 32 GB RAM, 64 bit op system, processors: Intel (R) Xeon (R) CPU x5670 @ 2.93 Ghz 2.93 Ghz (2 processors).
So far I had worked on many projects with no problems and then a few weeks ago the project crashed non stop. The problem was overcome when I got rid of all MP3s and converted them to RAM. Again this was an issue I didn't have in the past and I don't recall changing anything.
Now it seems it is impossible for me to export/render out a project into a Quick time file or even AVI. If its quick time I get this message: After Effects unable to render error an output module failed. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: AE unable to open projects in the background 26:: 142)
This is happening with different projects.
I read the forums and heard that the problem may be a Bug with quicktime and H.264? I never had a problem with it before but again when I try to export AVI I get this error message:
AE unable to open projects in the background
I have a feeling it is quick time related. I have uninstalled and reinstalled QT but still get the problem. It will open old QT files no problem. I tried to download a bug fix update as one post suggested but I think I have the latest which is why it didn't work.
This particular project has a couple of quick media H.264 files. Do I need to convert them? Are they the cause for all of this?
I am sorry I really tried to look for answers in the forums before contacting you here but I cannot find a reason for all this mess, which again only appeared a few weeks ago with no problems for months...if someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

update: I converted all the H.264 footage which were in the project to WMV. And I was able to test export with AVI and it turne dout fine (like 10 seconds). However I still got the Error message: "After Effects unable to render error an output module failed, a filme may be corrupted or damaged. Error-1610153464 " when I tried to export H.264 QT..
I don't know what to do now, how can a problem which did not exist suddenly come up. How can I export a QT file? with AVI it will be massive!
Many thanks
Amanda

Unable to open and read the full sms on n95 8gb

Similar Messages

Maybe you are looking for