Unable to open Essbase Database
Hi,
Following Essbase error is coming when data is fetching from Essbase database from a report: -
Failed to open database 'Database1' on server 'URL'
Error reported by Essbase.
Additional information:
Syntax error loading filters - operation canceled
Kindly tell what could be the reasons behind it??
Regards,
Atul K
Hi,
Followiong could be the reasons of your problem: -
1- Try to restart application and then try to start database.
2- If point 1 not work then may be application process 'ESSSVR' for that application get hangh. So stop all app/db and check if any Esssvr is running from Task Manager then kill it.
3- Restart Essbase Server and try to restart db again.
4- If problem still persists then may be your db got corrupted and please restore it from backup.
5- Also from your posted error, it is looking that Essbase internal application $DM_APP$ is either missing or corrupted so please make it in following ways:-
5.1. Shut down Essbase
5.2. Rename essbase.sec to essbasebackup.sec
5.3. Rename $DM_APP$ directory, e.g., Backup_$DM_APP$ if it exists but if it doesn't do not worry about it.
5.4. Restart Essbase. At this point, a new essbase.sec is created,along with a new $DM_APP$ directory and files associated withit.
5.5. From EAS, make sure Data Mining part is working
5.6. Shutdown Essbase
5.7. Rename essbase.sec to essbasenew.sec
5.8. Rename essbasebackup.sec to essbase.sec
5.9. Start Essbase
5.10. Check to make sure Data Mining part is working
5.11. Try renaming application or load db
5.12. Once all is working, remove essbasenew.sec.
Hope it will help pyou.
Atul K,
Similar Messages
-
Unable to open 10g Database Control Webpage from another computer
Unable to open 10g Database Control Webpage from another computer
Hi Gurus
I have just installed Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on my PC Windows XP , created database and configured DB control
I can open Database Control Webpage on the database machine by typing
http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
or
http://136.18.70.189:1158/em
But can not open it from another PC
When I do following from another PC
1. http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
Get error: [code=DNS_NO_DATA] The IP address was not found during the DNS lookup. Contact your system administrator.
2. http://136.18.70.189:1158/em
Get error:Can not display web page
I can ping 136.18.70.189 but not USI2374993VND0.vlgdw2k.visteon.com
On the other PC I also tried adding 136.18.70.189 to
tools - internet options - security - local internet - sites - advanced - add this web
site to the zone as http://136.18.70.189
But it did not work
Please help with any ideas
Thanks a bunch
New DBAFirewalls?
DNS translation issues? -
Unable to access Essbase Database
Hi,
Following Essbase error is coming when data is fetching from Essbase database from a report: -
Failed to open database 'Database1' on server 'URL'
Error reported by Essbase.
Additional information:
Syntax error loading filters - operation canceled
Kindly tell what could be the reasons behind it??
Regards,
Atul KHere is a post from the network54 board that discusses this problem. I used to get that error after I suspended my laptop, then restarted and was assigned a new ip address..
Tim Tow
Oracle ACE
Applied OLAP, Inc -
I am not able to open the database: Following are the facts and things I have done so far
1) database is in NONARCHIVE mode
2) database backed up by using datafiles, controlfile, logfiles etc
3) datafiles, controlfile and logfiles are out of sync because the time of disk back at night a cron job also update a datafile. So one particular datafile is out of sync.
4) When we start the database following error comes
a. ora-01207:file is more recent than controlfile - old controlfile Question1: Is it because i did a hot backup and whenever there is a write, the controlfile ...
5) when we try use ‘alter database recover we get following
a. ora-01157: connot identify/lock data file 21 – DBWR file
b. ora-01110: data file 21 ‘…../…/../o2_mf_sys_undo_zvt7qxkf_.dbf
6) http://forums.oracle.com/forums/thread.jspa;jsessionid=8d92200830de9b3de878352a40c888bc8a2b521b29d5.e34QbhuKaxmMai0MaNeMb3eKaN90?messageID=1374408�
7) So far I have tried
a. RECOVER DATABASE UNTIL CANCEL & ALTER DATABASE OPEN RESETLOGS – doesn’t work
b. Alter database archivelog – doesn’t work
please let know if some had any solutionTanwar
Do the following and you should be fine with your database.
The error indicates that oracle process cannot open more locks than allowed.
I assume you are on aix/unix environment
as oracle user run this command
#ulimit -a
and verify the settings. You may want to set all the setting to unlimited as below.
Some commands may not work depending on your OS, dont worry.
ulimit -t unlimited
ulimit -f unlimited
ulimit -d unlimited
ulimit -s unlimited
ulimit -m unlimited
ulimit -c unlimited
ulimit -n unlimited
ulimit -v unlimited
If still not resolved, ask you system adminitrator to check security setting for oracle user under /etc/security/limits.
Change the values for oracle user to -1 which means unlimited.
logout from oracle user session and login again, check ulimit -a. Start your instance and you are good now.
I have seen this issue many times on many system.
Good luck. -
Unable to open windows database files hosted on Lion Server
I use Mac Mini as a server. With Snow Leopard Server I shared files hosted on Mac Mini and other PC computers on the network could use together Access and Quickbooks files. After upgrading to Lion Server no PC is able to open these database files. E.g. when opening MS Access file hosted on Lion server following error pops up: "too many users acessing the file". However, the Access database can be open from network PC when opening in exclusive (single user) mode. Normal multiuser mode brings error.
Is it possible to solve this Lion sharing issue?Same problem. Just fired up a new Mini with Lion Server to replace an HP Home Server because we need more than 10 users in our church now. Got all the users set up with group permissions and home directories on the server. Unfortunately I expected Lion Server to work just like Snow Leopard Server and be able to serve up ODBC databases like Access and Quickbooks files.
Anyone heard if Apple has a solution to the "too many users" error message? It appears that Access in particular attempts to open the data file and create a locking file (ldb), but cannot get the file permissions it needs from Lion.
Sorry I have no solution for all yet. -
Unable to open the database after it has been mounted. XE 10G
I am on Windows XP running Oracle 10G XE Edition.
After running a defrag & cleanup process, I have not been able to access any of the objects on the database.
A quick check
set lines110
col strtd hea 'STARTED'
col instance_name for a8 hea 'INSTANCE'
col host_name for a15 hea 'HOSTNAME'
col version for a10
select instance_name, version, host_name, status
, database_status, to_char(startup_time,'DD-MON-YYYY HH:MI:SS') strtd
from v$instance;
returns this
INSTANCE VERSION HOSTNAME STATUS DATABASE_STATUS STARTED
xe 10.2.0.1.0 DT8775C MOUNTED ACTIVE 03-DEC-2010 11:38:00If I use this command, it throws the following error.
SQL> ALTER DATABASE OPEN;
ALTER DATABASE OPEN
*ERROR at line 1:*
ORA-16014: log 2 sequence# 679 not archived, no available destinations
ORA-00312: online log 2 thread 1:
'D:\ORACLEEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_4JD5RZC0_.LOG'How can I fix this situation?
There are zero files in the
"D:\ORACLEEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\" folder.Hi,
Check this out...
http://www.beyondoracle.com/2008/10/11/archivelog-ora-16014-log-sequence-not-archived/
Regards,
Levi Pereira -
Unable to open 2007B database in SAP Business One version 8.8
Hi Experts,
We are in the process of upgrading one of our client from SAP Business one 2007B PL13 to SAP Business One 8.8. While trying to open the client's live database in 8.8, system throws a message "You cannot upgrade company databases from SAP Business One client. Use the Upgrade CD or contact your IT administrator for the upgrade". Plz guide me on how can I open the DBs used in 2007B in 8.8??
Regards,
MadhavanHi
I thiink your database is not updated ..Install client in your server and try with opening up ..
It will probably ask you to back up the database and upgrade ...
If not ,uninstall everything thing ..instead of having new installation ,download the upgrade version and see if resolves your issue
Hope this helps
Bishal -
Unable to open production database after normal shutdown
Hi,
We are using oracle database 10.2.0.3 on AIX 5.3 with ASM.
I have normally shutdown my database and after that when I am trying to open that i got lots of errors and as a result of that ASM diskgroups got dismounted.
Our asm instance boots normally and mount the diskgroups but while opening database got following error:
SQL> startup
ASM instance started
Total System Global Area 130023424 bytes
Fixed Size 2071104 bytes
Variable Size 102786496 bytes
ASM Cache 25165824 bytes
ASM diskgroups mounted
SQL>
=============================
DATABASE STARTUP
===============================
SQL> startup
ORACLE instance started.
Total System Global Area 2.0451E+10 bytes
Fixed Size 2109304 bytes
Variable Size 1929379976 bytes
Database Buffers 1.8488E+10 bytes
Redo Buffers 31444992 bytes
Database mounted.
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '+ORADATA/pakedwp/datafile/system.260.644366937'
ORA-15078: ASM diskgroup was forcibly dismounted
FOllowing is the alert_log entries details:
==================================================
Errors in file /u01/app/oracle/admin/pakedwp/bdump/pakedwp_dbw0_160228.trc:
ORA-01157: cannot identify/lock data file 862 - see DBWR trace file
ORA-01110: data file 862: '+ORADATA/pakedwp/datafile/sor_pre_voice_su_out_dec08w4.2014.672099749'
ORA-17503: ksfdopn:2 Failed to open file
+ORADATA/pakedwp/datafile/sor_pre_voice_su_out_dec08w4.2014.672099749
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
Thu Jan 29 20:00:10 2009
Errors in file /u01/app/oracle/admin/pakedwp/bdump/pakedwp_dbw0_160228.trc:
ORA-01157: cannot identify/lock data file 863 - see DBWR trace file
ORA-01110: data file 863:
'+ORADATA/pakedwp/datafile/sor_msc_cdr_in_dec08w1.2013.672099785'
ORA-17503: ksfdopn:2 Failed to open file
+ORADATA/pakedwp/datafile/sor_msc_cdr_in_dec08w1.2013.672099785
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
Thu Jan 29 20:00:10 2009
Errors in file /u01/app/oracle/admin/pakedwp/bdump/pakedwp_dbw0_160228.trc:
ORA-01157: cannot identify/lock data file 864 - see DBWR trace file
ORA-01110: data file 864:
'+ORADATA/pakedwp/datafile/sor_msc_cdr_out_sep08w1.1550.663694183'
ORA-17503: ksfdopn:2 Failed to open file
+ORADATA/pakedwp/datafile/sor_msc_cdr_out_sep08w1.1550.663694183
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
Thu Jan 29 20:00:10 2009
Errors in file /u01/app/oracle/admin/pakedwp/bdump/pakedwp_dbw0_160228.trc:
ORA-01157: cannot identify/lock data file 865 - see DBWR trace file
ORA-01110: data file 865:
'+ORADATA/pakedwp/datafile/sor_msc_cdr_in_sep08w2.1549.663694199'
ORA-17503: ksfdopn:2 Failed to open file
+ORADATA/pakedwp/datafile/sor_msc_cdr_in_sep08w2.1549.663694199
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
Thu Jan 29 20:00:10 2009
Errors in file /u01/app/oracle/admin/pakedwp/bdump/pakedwp_dbw0_160228.trc:
ORA-01157: cannot identify/lock data file 866 - see DBWR trace file
ORA-01110: data file 866:
'+ORADATA/pakedwp/datafile/sor_msc_cdr_out_sep08w2.1157.663694209'
ORA-17503: ksfdopn:2 Failed to open file
+ORADATA/pakedwp/datafile/sor_msc_cdr_out_sep08w2.1157.663694209
ORA-15001: diskgroup "ORADATA" does not exist or is not mounted
ORA-15001
==============================================
No Recent changes have been brought down on the storage or system.
After this failure when I try to mount diskgroup it successfuly mounted again. But again when we try to open database it prompt same errors:
Does any one have any solution/suggestions?????????following are the results of the query:
NAME PATH HEADER_STATU DISK_NUMBER
ORADATA_0064 /dev/rhdisk13 MEMBER 64
ORADATA_0030 /dev/rhdisk40 MEMBER 30
ORADATA_0031 /dev/rhdisk41 MEMBER 31
ORADATA_0062 /dev/rhdisk10 MEMBER 62
ORADATA_0005 /dev/rhdisk11 MEMBER 5
FLASH_RECO_AREA_0002 /dev/rhdisk12 MEMBER 2
ORADATA_0006 /dev/rhdisk33 MEMBER 6
ORADATA_0024 /dev/rhdisk34 MEMBER 24
ORADATA_0028 /dev/rhdisk38 MEMBER 28
ORADATA_0029 /dev/rhdisk39 MEMBER 29
ORADATA_0019 /dev/rhdisk3 MEMBER 19
ORADATA_0023 /dev/rhdisk4 MEMBER 23
ORADATA_0000 /dev/rhdisk27 MEMBER 0
ORADATA_0002 /dev/rhdisk28 MEMBER 2
ORADATA_0018 /dev/rhdisk29 MEMBER 18
ORADATA_0017 /dev/rhdisk26 MEMBER 17
ORADATA_0016 /dev/rhdisk25 MEMBER 16
ORADATA_0015 /dev/rhdisk24 MEMBER 15
ORADATA_0014 /dev/rhdisk23 MEMBER 14
ORADATA_0013 /dev/rhdisk22 MEMBER 13
ORADATA_0012 /dev/rhdisk21 MEMBER 12
ORADATA_0011 /dev/rhdisk20 MEMBER 11
ORADATA_0010 /dev/rhdisk19 MEMBER 10
ORADATA_0008 /dev/rhdisk17 MEMBER 8
ORADATA_0007 /dev/rhdisk16 MEMBER 7
ORADATA_0027 /dev/rhdisk37 MEMBER 27
ORADATA_0032 /dev/rhdisk42 MEMBER 32
ORADATA_0065 /dev/rhdisk15 MEMBER 65
ORADATA_0009 /dev/rhdisk18 MEMBER 9
ORADATA_0026 /dev/rhdisk36 MEMBER 26
ORADATA_0025 /dev/rhdisk35 MEMBER 25
ORADATA_0020 /dev/rhdisk30 MEMBER 20
ORADATA_0021 /dev/rhdisk31 MEMBER 21
ORADATA_0022 /dev/rhdisk32 MEMBER 22
ORADATA_0003 /dev/rhdisk44 MEMBER 3
ORADATA_0001 /dev/rhdisk43 MEMBER 1
ORADATA_0004 /dev/rhdisk45 MEMBER 4
ORADATA_0033 /dev/rhdisk46 MEMBER 33
ORADATA_0034 /dev/rhdisk47 MEMBER 34
ORADATA_0035 /dev/rhdisk48 MEMBER 35
ORADATA_0036 /dev/rhdisk49 MEMBER 36
ORADATA_0037 /dev/rhdisk5 MEMBER 37
ORADATA_0038 /dev/rhdisk50 MEMBER 38
ORADATA_0039 /dev/rhdisk51 MEMBER 39
ORADATA_0040 /dev/rhdisk52 MEMBER 40
ORADATA_0041 /dev/rhdisk53 MEMBER 41
ORADATA_0042 /dev/rhdisk54 MEMBER 42
ORADATA_0043 /dev/rhdisk55 MEMBER 43
ORADATA_0044 /dev/rhdisk56 MEMBER 44
ORADATA_0045 /dev/rhdisk57 MEMBER 45
ORADATA_0046 /dev/rhdisk58 MEMBER 46
ORADATA_0047 /dev/rhdisk59 MEMBER 47
ORADATA_0066 /dev/rhdisk6 MEMBER 66
ORADATA_0048 /dev/rhdisk60 MEMBER 48
ORADATA_0049 /dev/rhdisk61 MEMBER 49
ORADATA_0050 /dev/rhdisk62 MEMBER 50
ORADATA_0053 /dev/rhdisk63 MEMBER 53
ORADATA_0054 /dev/rhdisk64 MEMBER 54
ORADATA_0063 /dev/rhdisk65 MEMBER 63
FLASH_RECO_AREA_0000 /dev/rhdisk66 MEMBER 0
ORADATA_0055 /dev/rhdisk67 MEMBER 55
ORADATA_0056 /dev/rhdisk68 MEMBER 56
ORADATA_0057 /dev/rhdisk69 MEMBER 57
ORADATA_0067 /dev/rhdisk7 MEMBER 67
ORADATA_0078 /dev/rhdisk93 MEMBER 78
ORADATA_0079 /dev/rhdisk94 MEMBER 79
ORADATA_0080 /dev/rhdisk95 MEMBER 80
ORADATA_0081 /dev/rhdisk96 MEMBER 81
ORADATA_0058 /dev/rhdisk70 MEMBER 58
ORADATA_0059 /dev/rhdisk71 MEMBER 59
ORADATA_0060 /dev/rhdisk72 MEMBER 60
ORADATA_0051 /dev/rhdisk8 MEMBER 51
ORADATA_0074 /dev/rhdisk89 MEMBER 74
ORADATA_0075 /dev/rhdisk90 MEMBER 75
ORADATA_0076 /dev/rhdisk91 MEMBER 76
ORADATA_0077 /dev/rhdisk92 MEMBER 77
ORADATA_0070 /dev/rhdisk85 MEMBER 70
ORADATA_0071 /dev/rhdisk86 MEMBER 71
ORADATA_0072 /dev/rhdisk87 MEMBER 72
ORADATA_0073 /dev/rhdisk88 MEMBER 73
ORADATA_0052 /dev/rhdisk9 MEMBER 52
ORADATA_0068 /dev/rhdisk83 MEMBER 68
ORADATA_0061 /dev/rhdisk73 MEMBER 61
ORADATA_0069 /dev/rhdisk84 MEMBER 69
84 rows selected.
SQL>
I have also check the ownership and its correct.
I have also check ASMCMD and tried to located files in the diskgroup and all files are there.
I have also successfully created one test directory in asm diskgroup by mkdir command. -
Error #3125: Unable to open the database file
Hello, my name is Alex.
Since the CC 2014 update I am having lots of problems with Muse. I get the Error #3125 quite often, and some pages won't load in Design mode. I tried to open the file from a local drive, but still doesn't work.
Could you please help out here? thanks a lot in advance.
AlexHi,
If this fix doesn't work try this...
I've been having this problem too. I was using a server-side save location for the site and resources. I moved to my HDD and this seems to have resolved the error for me.
Let me know if that resolves it. -
Unable to open 11g R2 database now after trying an RMAN restore
Hi my database is not opening now.
What I was trying was to restore the database on my new server from latest database taken from my old live server and applying it on my new 11g DB (new server-database already created)
old server-11.1.0.7.0-windows 2003 server 32 bit
new server-11.2.0.3.0-windows 2008 64 bit server
The steps i have done which caused this , (After everything was working fine, i did these foll.steps and now all messed up):
The oracle database on this new server was already 11.2.3.0 -it was not upgrade, i directly installed 11.2.0.3.0 on it + applied latest patches etc.
I took RMAN backup from old server 11.1.0.7.0 oracle database.
Copied this backup to to the new server flash recovery area &every step of the restore was working fine -
in nomount mode, restored the control file from autobackup-fine
in mount mode, catalogued the files-fine (Backup from old live,copied to new live)
I restored&Recovered the database until the latest archivelogs.
Until the above steps-all worked fine like a normal recovery steps.
Then I gave "alter database open resetlogs" in RMAN prompt, it gave out error and from that point onwards I am unable to open the database now.
Unfortunately, couldnt grab full screenshot of the error in RMAN but the error basically said that bootstrap failed and i have to open the database with the upgrade option?
Please see in alert log as well
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Following is the last lines from alert log:
[code]
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Windows NT Version V6.1 Service Pack 1
CPU : 4 - type 8664, 4 Physical Cores
Process Affinity : 0x0x0000000000000000
Memory (Avail/Total): Ph:3760M/8191M, Ph+PgF:9170M/16381M
VM name : VMWare Version (6)
Using parameter settings in server-side spfile F:\APP\ORACLE\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEGEOP.ORA
System parameters with non-default values:
processes = 150
memory_target = 3728M
control_files = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL01.CTL"
control_files = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL02.CTL"
control_files = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_format = "ARC%S_%R.%T"
db_recovery_file_dest = "I:\oracle\flash_recovery_area"
db_recovery_file_dest_size= 45G
undo_tablespace = "UNDOTBS1"
sec_case_sensitive_logon = FALSE
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=GEOPXDB)"
audit_file_dest = "F:\APP\ORACLE\ADMIN\GEOP\ADUMP"
audit_trail = "DB"
db_name = "GEOP"
open_cursors = 300
diagnostic_dest = "F:\APP\ORACLE"
Thu Dec 12 17:22:18 2013
PMON started with pid=2, OS id=3440
Thu Dec 12 17:22:18 2013
PSP0 started with pid=3, OS id=10252
Thu Dec 12 17:22:19 2013
VKTM started with pid=4, OS id=11684 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Thu Dec 12 17:22:19 2013
GEN0 started with pid=5, OS id=4528
Thu Dec 12 17:22:19 2013
DIAG started with pid=6, OS id=5652
Thu Dec 12 17:22:19 2013
DBRM started with pid=7, OS id=7676
Thu Dec 12 17:22:19 2013
DIA0 started with pid=8, OS id=5724
Thu Dec 12 17:22:19 2013
MMAN started with pid=9, OS id=6632
Thu Dec 12 17:22:19 2013
DBW0 started with pid=10, OS id=3572
Thu Dec 12 17:22:19 2013
LGWR started with pid=11, OS id=8876
Thu Dec 12 17:22:19 2013
CKPT started with pid=12, OS id=3748
Thu Dec 12 17:22:20 2013
SMON started with pid=13, OS id=8108
Thu Dec 12 17:22:20 2013
RECO started with pid=14, OS id=1932
Thu Dec 12 17:22:20 2013
MMON started with pid=15, OS id=7468
Thu Dec 12 17:22:20 2013
MMNL started with pid=16, OS id=8136
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = F:\app\oracle
Thu Dec 12 17:22:21 2013
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 3351347149
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Thu Dec 12 17:22:26 2013
ALTER DATABASE OPEN
Beginning crash recovery of 1 threads
parallel recovery started with 3 processes
Started redo scan
Completed redo scan
read 11 KB redo, 6 data blocks need recovery
Started redo application at
Thread 1: logseq 3, block 2, scn 59089613795
Recovery of Online Redo Log: Thread 1 Group 6 Seq 3 Reading mem 0
Mem# 0: F:\ORACLE11G\ORADATA\GEOP\GEOP\REDO06.LOG
Completed redo application of 0.01MB
Completed crash recovery at
Thread 1: logseq 3, block 24, scn 59089633817
6 data blocks read, 6 data blocks written, 11 redo k-bytes read
Read of datafile 'F:\ORACLE11G\ORADATA\GEOP\GEOP\TEMP01.DBF' (fno 201) header failed with ORA-01203
Rereading datafile 201 header failed with ORA-01203
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_dbw0_3572.trc:
ORA-01186: file 201 failed verification tests
ORA-01122: database file 201 failed verification check
ORA-01110: data file 201: 'F:\ORACLE11G\ORADATA\GEOP\GEOP\TEMP01.DBF'
ORA-01203: wrong incarnation of this file - wrong creation SCN
File 201 not verified due to error ORA-01122
LGWR: STARTING ARCH PROCESSES
Thu Dec 12 17:22:27 2013
ARC0 started with pid=19, OS id=10876
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Thu Dec 12 17:22:28 2013
ARC1 started with pid=24, OS id=10912
Thu Dec 12 17:22:28 2013
ARC2 started with pid=25, OS id=6652
Thu Dec 12 17:22:28 2013
ARC3 started with pid=26, OS id=9648
ARC1: Archival started
ARC2: Archival started
ARC1: Becoming the 'no FAL' ARCH
Thread 1 advanced to log sequence 4 (thread open)
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 4
Current log# 4 seq# 4 mem# 0: F:\ORACLE11G\ORADATA\GEOP\GEOP\REDO04.LOG
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Archived Log entry 64945 added for thread 1 sequence 3 ID 0xc7c27920 dest 1:
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_ora_12260.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_ora_12260.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Error 704 happened during db open, shutting down database
USER (ospid: 12260): terminating the instance due to error 704
Instance terminated by USER, pid = 12260
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (12260) as a result of ORA-1092
Thu Dec 12 17:22:33 2013
ORA-1092 : opitsk aborting process
[/code]
Please please please let me know what steps should I do now to get my 11g database operational again?
Now when i am trying:
(SQL prompt)
[code]
>sqlplus "/ as sysdba"
SQL*Plus: Release 11.2.0.3.0 Production on Thu Dec 12 17:22:05 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup open;
ORACLE instance started.
Total System Global Area 3891630080 bytes
Fixed Size 2261120 bytes
Variable Size 2147487616 bytes
Database Buffers 1728053248 bytes
Redo Buffers 13828096 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 12260
Session ID: 5 Serial number: 5
SQL> startup open upgrade;
SP2-0714: invalid combination of STARTUP options
SQL> startup upgrade;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup upgrade open;
SP2-0714: invalid combination of STARTUP options
SQL> alter database mount;
ERROR:
ORA-03114: not connected to ORACLE
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
[/code]This is why you do backups both before and after doing other things.
So one way to do something like this:
Backup old db.
expdp old db.
Install new 11gR2, create database.
Back it up.
Turn off archivelog.
impdp
Turn on archivelog.
Back it up.
The general thought here is you would start over with the first new db backup if the imp didn't work, you turn off archiving to avoid generating lots of redo that would be for a recovery you would never do.
There is more than one way to do it (TIMTOWTDI), best way depends on details, including volume of data and platform changes. expdp/impdp has an over the network option if disk space is limited and network is fast.
I usually allow for several tries when going to a new box, since the new box will require testing anyways. -
User unable to open Database in RSC 3.1
Hey Everyone
I've got a user whose unable to open a database in RoboSource Control 3.1. She receives no error and RSC just sits there like DB connection was never opened. She can open other databases.
I've tried different accounts on her machine and the database won't open for them either, but her account can open the database from other machines. I've repaired and uninstalled/reinstalled RSC but to no avail. I originally thought this to be a cache problem, but since it's affecting other accounts I'm no longer sure.
Has anyone seen something like this before?
Thanks!I am out of the office until 27-07-2009.
If you require assistance please contact the helpdesk at
[email protected] or +1 709 724 8529.
Thanks
Note: This is an automated response to your message "[RoboSource Control]
User unable to open Database in RSC 3.1" sent on 7/24/2009 8:43:06 PM.
This is the only notification you will receive while this person is away.
This e-mail may contain confidential information and the sender does not waive any related rights and obligations. If you are not the intended recipient please notify the sender and discard it. -
Master unable to open database
I am trying to run a replicated Berkeley DB instance and while the environment is created successfully and the master is elected, when the master attempts to open the database it returns an ENOENT. According the the documentation (and replication guide) this type of error occurs upon open when a replica attempts to open the database when it has not been created yet. While this makes sense for the replica, it doesn't seem like the master should ever return this error, particularly since the master has the DB_CREATE flag set. It is unclear to my why it is that the master replica is unable to open the database, does anyone know why this is occurring?
Here is the relevant code:
try
u_int32_t envFlags;
// First initialize the database enviroment information
envFlags = DB_CREATE | // If the environment does not exist, create it.
DB_RECOVER | // Run normal recovery
DB_INIT_LOCK | // Initialize locking
DB_INIT_LOG | // Initialize logging
DB_INIT_MPOOL | // Initialize the cache
DB_INIT_TXN | // Initialize transactions
DB_INIT_REP | // Initialize replication
DB_THREAD; // free-threaded (thread-safe)
env_->set_errfile(stderr);
//Sets verbose output to make replication easier to debug
env_->set_verbose(DB_VERB_REPLICATION, 1);
//Configure the local server
env_->repmgr_set_local_site(local_.ip.c_str(), local_.port, 0);
env_->repmgr_add_remote_site(replica.ip.c_str(), replica.port, NULL, 0);
env_->rep_set_nsites(2);
//If a role is specified then set the databases priority accordingly.
switch ( r )
case MASTER:
env_->rep_set_priority(500);
cerr << "Master Priority" << endl;
break;
case SLAVE:
env_->rep_set_priority(50);
cerr << "Slave Priority" << endl;
break;
case UNKNOWN:
default:
env_->rep_set_priority(5);
cerr << "Unkown Priority" << endl;
break;
env_->set_app_private(&status);
env_->set_event_notify(callback_handler);
env_->repmgr_set_ack_policy(DB_REPMGR_ACKS_ONE);
env_->set_timeout(1000000, DB_SET_TXN_TIMEOUT);
env_->set_tx_max(10000);
env_->set_lk_detect(DB_LOCK_MINWRITE);
env_->open(path.c_str(), envFlags, 0);
env_->repmgr_start(3, DB_REP_ELECTION);
sleep(5);
db_ = new Db(env_, 0);
u_int32_t dbFlags = 0;
bool isOpen = false;
while(!isOpen)
dbFlags = DB_AUTO_COMMIT;
if( status.role == MASTER )
cout << "Setting DB_CREATE Flag " << endl;
dbFlags |= DB_CREATE;
if( db_ == NULL )
db_ = new Db(env_, 0);
db_->set_error_stream(&std::cerr);
cerr << "Attempting to open db" << endl;
try
db_->open(NULL, dbFileName_.c_str(), NULL, DB_BTREE, dbFlags, 0);
cerr << "DB Opened successfully" << endl;
isOpen = true;
break;
catch(DbException dbe)
/* It is expected that this condition will be triggered
* when client sites start up.
* It can take a while for the master site to be found
* and synced, and no DB will be available until then.
if (dbe.get_errno() == ENOENT) {
cerr << status.id << " DB not available yet, retrying." << endl;
db_->close(0);
db_ = NULL;
} else {
env_->err(dbe.get_errno(), "DB->open");
throw dbe;
sleep(5);
// DbException is not a subclass of std::exception, so we
// need to catch them both.
catch(DbException &e)
std::cerr << "Error opening database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
catch(std::exception &e)
std::cerr << "Error opening database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
I am running this code with verbose replication output on a local machine. I start a single client on port 9090 and add a replica on port 9091 (the replica does not start since the first client does not return). I have tried cleaning out the folder where is db is written to and it makes no difference. I have provided some /* comments */ to augment what is being output.
REP_UNDEF: EID 0 is assigned for site localhost:9091
9090 Master Priority
REP_UNDEF: Read in gen 9
REP_UNDEF: Read in egen 9
REP_UNDEF: rep_start: Found old version log 14
CLIENT: dbs/ rep_send_message: msgv = 5 logv 14 gen = 9 eid -1, type newclient, LSN [0][0] nogroup nobuf
event: DB_EVENT_REP_CLIENT, I am now a replication client
CLIENT: starting election thread
CLIENT: elect thread to do: 0
CLIENT: repmgr elect: opcode 0, finished 0, master -2
CLIENT: init connection to site localhost:9091 with result 115
connecting to site localhost:9091: Connection refused
Done sleeping, trying to open dbs
/* Environment has been opened, now the client will try to open the database */
Attempting to open db
DB not available yet, retrying.
/* Open fails since it is a client and there is no master to create the database yet */
CLIENT: elect thread to do: 1
DB_ENV->rep_elect:WARNING: nvotes (1) is sub-majority with nsites (2)
DB_ENV->rep_elect:WARNING: nvotes (1) is sub-majority with nsites (2)
CLIENT: Start election nsites 2, ack 1, priority 500
Attempting to open db
CLIENT: Tallying VOTE1[0] (2147483647, 9)
CLIENT: Beginning an election
CLIENT: dbs/ rep_send_message: msgv = 5 logv 14 gen = 9 eid -1, type vote1, LSN [1][5174] nogroup nobuf
DB not available yet, retrying.
CLIENT: Tallying VOTE2[0] (2147483647, 9)
CLIENT: Counted my vote 1
CLIENT: Skipping phase2 wait: already got 1 votes
CLIENT: Got enough votes to win; election done; winner is 2147483647, gen 9
CLIENT: Election finished in 2.098189000 sec
CLIENT: Election done; egen 10
event: DB_EVENT_REP_ELECTED
CLIENT: Ended election with 0, sites 0, egen 10, flags 0x200a01
CLIENT: Election done; egen 10
CLIENT: New master gen 10, egen 11
CLIENT: Establishing group as master.
MASTER: rep_start: Old log version was 14
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type newmaster, LSN [1][5174] nobuf
MASTER: restore_prep: No prepares. Skip.
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5174]
event: DB_EVENT_REP_MASTER
event: DB_EVENT_REP_MASTER
MASTER: election thread is exiting
/* Client gets elected to be the master, and thus can set the db create flag */
Setting DB_CREATE Flag
Attempting to open db
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5210] flush
DB not available yet, retrying.
/* Master cannot open the database event though the db create flag is set, this is the issue */
Setting DB_CREATE Flag
Attempting to open db
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5272] flush
DB not available yet, retrying.
/* repeated indefinitely */
Can anyone help? Thank you.dbFileName is "./dbs/test.db" and the dbs folder exists. I tried putting 777 permissions on the folder as well as using " dbs/test.db" to no avail.
I removed the database and all logs and ran it again for the same time as before and below is the db_printlog output:
[1][28]__txn_recycle: rec: 14 txnp 0 prevlsn [0][0]
min: 2147483648
max: 4294967295
[1][64]__fop_create: rec: 143 txnp 80000001 prevlsn [0][0]
name: ./dbs/80000000.f1e7a7fc0
appname: 1
mode: 660
[1][128]__fop_create: rec: 143 txnp 80000003 prevlsn [0][0]
name: ./dbs/80000002.b856343a0
appname: 1
mode: 660
[1][192]__fop_create: rec: 143 txnp 80000005 prevlsn [0][0]
name: ./dbs/80000004.f447bb460
appname: 1
mode: 660
[1][256]__fop_create: rec: 143 txnp 80000007 prevlsn [0][0]
name: ./dbs/80000006.d66a33830
appname: 1
mode: 660
[1][320]__fop_create: rec: 143 txnp 80000009 prevlsn [0][0]
name: ./dbs/80000008.d59895bb0
appname: 1
mode: 660 -
I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day -
I have 2 exchange server "A" and "B". Server "A" have "Test1" database and Server "B" have "Test2" database. I tried move some mailboxes from "Test1" to "Test2"
but sometimes mailboxes cannot finished and display below error. I used Domain administrator to move mailboxes and grant "Manage full access permission" to these mailboxes but still failed. Finally, I clear the failed move request
and repeat the move mailboxes action several times. Then, the move request completed without error. Have any suggestion? Please help. Thank you!
Mailbox move for 'xxx.com/xxx/xxx/xxx - Users/xxx/Peter' (331d5b4e-0bd1-428a-ae28-d97581ae0d7f) has failed.
Error code: -2147024891
MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=132]
Lid: 27161 EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
Lid: 32881 StoreEc: 0x80070005
Lid: 50035
Lid: 64625 StoreEc: 0x80070005
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 56503
Lid: 12716 StoreEc: 0x80070005
Lid: 20794
Lid: 28474 StoreEc: 0x80070005
Lid: 22330 dwParam: 0x0 Msg: 14.03.0123.002:NHK-S08-MBD02
Lid: 1750 ---- Remote Context End ----
Lid: 23354 StoreEc: 0x80070005
Lid: 25913
Lid: 21817 ROP Failure: 0x80070005
Lid: 26297
Lid: 16585 StoreEc: 0x80070005
Lid: 32441
Lid: 1706 StoreEc: 0x80070005
Lid: 24761
Lid: 20665 StoreEc: 0x80070005
Lid: 25785
Lid: 29881 StoreEc: 0x80070005
Context:
Mailbox: Primary (331d5b4e-0bd1-428a-ae28-d97581ae0d7f)Hi Gordon
This could happen if there is any mailbox which has occupied more space than its normal quota allocated.
As suggested by geo try to clean all the DB's first
You can probably run Get-Mailboxdatabase | Clean-Mailboxdatabase which will clean all of your DB's wait for some time until it gets completed
Also try running the command with the MRS server parameter switch and specify a CAS FQDN and see the results if it gets succeded
Get-Mailbox -Database 'DBNAME'| New-MoveRequest -TargetDatabase DBNAME -BatchName "BATCHNAME" -BadItemLimit 100 -AcceptLargeDataLoss -MRSserver CAS server FQDN Good Luck !!Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish -
Mac Manager: Unable to open databases
I'm running the 10.4 upgrade and Mac Manager. I'm suddenly unable to open the MM admin program and am given the following error:
Unable to open databases on "OurServer" because of an unknown error: A disk error has occurred
I've tried rebuilding the databases by following the directions in Article 88023, but that hasn't changed anything. I still can't open MM and our users are unable to login.
Any help would be greatly appreciatedI have 5 buildings that are still using MM. We recently upgraded the servers from 10.2.8 to 10.3.9. When I try to admin MM on the 10.3 servers from my laptop with 10.4.7 I get an error, something like, unable to access database, folder not found.
However if I run MM admin from a 10.3 workstation it works fine. have you tried to admin MM from a different workstation?
iBOOK G4 Mac OS X (10.4.7)
Maybe you are looking for
-
Photo Stream not working under IOS 7 and Aperture 3.4
Since updadting to iOS 7, no matter what I do, my iPod Touch (latest generation) does not work with Photo Streams that I shared via Aperture. Friends who are subscribed still see the streams but I do not. My device no longer accepts new invitations s
-
Need to re-enter serial number again on some Macs after installation and usage of CS6 Mac ENG
Hello, a while ago we bought a site license for Adobe CS6 Mac ENG and we installed it without and problem. After a while one Mac came up that the license was expired and the program will go to trial mode. After we keyed in the serial number again, we
-
Dear All, Please have a look at following simple code: public class Test<T> { T member; public T getMember() { return member; public void setMember(T member) { this.member = member; Test<T> add(Test<T> t) What
-
Requirements for High-Load OLTP Database
Hi guys! Need your Best Practise! I will install&configure High-Load OLTP Database. 5 million users 500 transactions per second What requirements is need? Do you have any papers or documents?
-
windows 8.1 firefox 35.0.1 is chaning the color temperature across the whole screen(including the bottom start bar) while browsing(scrolling) and/or when changing tabs between a light(white) and darker pages. I've searched google and firefox settings