Unable to pass on value to report
Hi,
I have three pages: form, classic report and interactive report.
I am trying to pass deptno value to deptno item created in classic report. On my form, under Actions, I am setting report's field value equal to form's field value. On clicking the Go button, the report appears but the field is blank.
I have tried it with both classic and interactive reports, but getting the blank field.
Can somebody suggest me the solution please?
I am using apex.oracle.com.
Thanks
Zeekay
I have the same problem!!! =) Wondering if in APEX 4.0 there is a new way of using Item_values in a report.
Similar Messages
-
Unable to pass the values to stored proc using presentation variable in OBI
Hi All,
Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There is an OBIEE requirement whereby two prompts need to be defined.
1. Textbox prompt
2. Drop-down prompt
The dropdown values should be populated using textbox prompt. So, we have used presentation variable in textbox prompt and passing the same to select query of drop-down.
Until this step, the report works just fine.
Now, the value in both textbox and drop-down needs to be passed to stored proc.
While trying to pass the values by using the presentation variable, the following error comes-up saying
Session variable has no value definition.
Note:Although the corresponding session variable has been set to default value,still the error appears.
Please advise.
Regards,
Prasad"Session variable has no value definition" I'm assuming typo error and it should be presentation variable.
Set default value for presentation variable that may work -
Problem in passing multiple values between reports
Can anyone help me in passing multiple values in prompts between reports in CRYSTAL REPORTS 2008 using opendoc or any method. I am able to pass single value from main report to second report. but not able to pass multiple values. Plz help me . Thanks in advance
Hi Ramy,
How you are passing your prompt values ? where you have created these prompts ? i.e. created these prompts in report level or stored procedure or Add command ?
Thanks,
Sastry -
Passing a value from Report A to B when B is in a different Subject Area
I had posted a question previously on how to pass the Dept # from Report A to B when B i in a different Subject Area. The question was:
Report A is a table on the Dashboard that shows Actual vs Budget results by Department. I want the user to click on the Department and be navigated to report B that shows the detail transactions that make up the Actual results. Report A and B are from different underlying subject areas. Thus when I navigate to report B, I see ALL departments, and not the one I clicked on in Report A to bring up Report B. How can I limit the results in Report B to be just the respective cell I clicked on in Report A?
I got great advice from Nico on how to use the GO URL, but I can only get that to work if the 2 reports in question are from the same data model. In my case they are NOT.
The GO URL seems to be working, as it does open up Report B when I click on the Department field in Report A, but it does not pass the Department number to Report B, even though reprot B has that field "as prompted".
Can anyone definitively indicate whether what I'm trying to do is not possible in BI EE?Read this from Venkat... I think this will be helpful in understanding prompts, both the column prompts (Answers) type and the dashboard prompts. Very useful, I think.
http://oraclebizint.wordpress.com/2008/04/30/oracle-bi-ee-101332-understanding-dashboard-prompts-passing-prompts-to-multiple-subject-areas-aliases/ -
Unable to pass the values from one report to another using navigation links
Hi All,
I am facing a strange issue where I have to pass a column value from one report to other.
I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
Can anyone advice where I was going wrong
Thank you,
AOHi,
The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
mark if helpful/correct.........
thanks,
prasanna -
i have a stored procedure for the data set, this is my issue
i have debits and payments stored in one table, they only way to retrieve both types is to select either the voucher key or the receipt key. this is my sql where statement
WHERE
(Pr_Voucher_Status_1."Voucher_number" = '66977' OR
Pr_Voucher_Status_1."po_recpt_key" = '66977')
i dont want to pass a specific value. i would like it to retrieve all records is the voucher is = to the po.
i can retrieve the data if i use an or statement IF PARAMETER = FIELD THEN TRUE in the select expert and pass a paramter value through. I dont want to use either field for a parameter value, what i need to do is some how say in the stored procedure or a crystal selection to retreive all records.
i thought about passing an array, but cant use the formula in
the record selection.
i hope this is clear and someone can help. im stumpedHi Sharon
You said you have both fields in one table. Please do the following ::
--Write a SQL , use the table as alias i.e.
Select a.Voucher_Number, b.Po_recpt_Key from Pr_Voucher_Status_1 a , Pr_Voucher_Status_1 b where a. Voucher_number = b.Po_recept_key
--Now try to pull the data in crystal reports
Thanks
Sastry -
Passing multiple values to report
Hi,
I have a parameter form. One of the field will have at least one value. When it have more than one value, the values will be separate by a comma and pass to the report. Please tell me how separate them and put them in quotation in the report query.
EX: the values are: PO, DR
There will be in the where condition as: where code in ('PO', 'DR');
Thank you in advance.
ps. I am using 10g
Edited by: 945599 on Jul 10, 2012 2:04 PMHello,
Forms does not allow user to select multiple values from a list item!
The purpose of the LIST ITEM is to provide a list of values for data entry. Since data entry is for a single row of data, the LIST ITEM allows a single value to be selected. Selecting multiple values in the LIST ITEM for a single value item on a single record is not the function of a LIST ITEM.
So, if you need to select multiple values from a field and pass them through a single parameter to report, i will present you two methods to achieve this!
First Method is the text item Method:
Stept 1:
Create the text item with the values you need to send to reports.
Step 2:
Create 2 visual attributes.One visual attribute is for selected values and the other one is for deselected values
Step 3:
Create a parameter, in forms parameter layouts which will hold the selected value.This parameter will be used to set the report query clause.
Step 4:
Create a trriger for the item which you created at step 1. An example is when-mouse-click trriger.In the body of the trriger,if the item instance is clicked you will modify its visual attribute and the parameter created at step 3 will receive the item instance value.
Step 5:
In reports create a user lexical parameter(which is a large text parameter ex 2000).Ex. P_Clause.The value of this parameter is the value recrived for the form parameter you created at step 3. You report query will be like this: select * from table where &P_Clause!
Second Method is the checkbox Method:
Stept 1:
Create a checkbox item near the text item with the values you need to send to reports.
Step 2:
Create a parameter, in forms parameter layouts which will hold the selected value.This parameter will be used to set the report query clause.
Step 3:
Before you call run_report_object proc, you will need to loop through records and build you parameter with the selected checkbox instances!
Step 4:
In reports create a user lexical parameter(which is a large text parameter ex 2000).Ex. P_Clause.The value of this parameter is the value recrived for the form parameter you created at step 3. You report query will be like this: select * from table where &P_Clause!
Hope this helps.
Regards,
Alex -
Unable to reference item value in report region cursor
I've worked on this for a couple of days now and cannot figure out what is going wrong. I have a report that I have created, using database links. Below is the code for my report:
declare
v_sql varchar2(32000) := null;
v_curr_sql varchar2(32000) := null;
v_full_sql varchar2(32000) := null;
cursor c1 is select distinct fiscal_year from fiscal_year where db_cc_id = v('G_DB_ID') order by 1;
begin
for r1 in c1 loop
v_curr_sql := 'sum(decode(fiscal_year,'''||r1.fiscal_year||''',visit_count,0)) as "'||r1.fiscal_year||'V", '||
'sum(decode(fiscal_year,'''||r1.fiscal_year||''',patient_count,0)) as "'||r1.fiscal_year||'P", ';
v_sql := v_sql ||v_curr_sql;
end loop;
v_full_sql := ' select name,'||v_sql||' sum(visit_count) visits, sum(patient_count) patients from visit_trends
where ehs_cc = :f109_client and visit_type = :p45_visit_type and ( (:g_fg = 0 and fg_id in (select fg_id from db_user_fg where ehs_cc = :f109_client and db_user_id = :f109_db_user_id)) or fg_id = :g_fg) group by name';
return v_full_sql;
end;
When I run the page, I get no data found. When I check my session state for the application variables, it tells me that the value for G_DB_ID is 24. If I plug in 24 to to the cursor instead of using the bind variable, it works. I've also tried the :G_DB_ID and nv('G_DB_ID') calls in the cursor. The strange thing is if I use a different bind variable (G_FG), which has a session state value of 0, it will at least return the two columns in the report not created by the sql loop. I must be able to use a bind variable in this report to make sure I'm getting the correct accounting periods for this client. I've even gone as far as to delete and recreate the page. Any suggestions?Hi Harry,
We are also facing the same issue, has the issue has been resolved. For some users we are able to select the lov and for few we are unable to select the lov but data is fetched in lov. Only select or quickselect is not working.
If so, please provide.
Regards
Raman
[email protected] -
Passing Checkbox values to report
Hi , I have created check box " Gender" :P2_gender
when i pass it to IR in where clause like " where gender = :P2_gender"
it is returning value if I check one value , but if I check both values in checkbox it is showing no records found..
I dont know where I went wrong . I used to use Select list with same logic worked fine. But this is my first time using Check Box..
Please guide me to achieve my requirement ..
Thank You,
Nihar NarlaThis is the way to do it right:
SELECT *
FROM emp
WHERE INSTR (':' || :p1_deptno_checkbox || ':', ':' || deptno || ':') > 0Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
Unable to pass parameter value from a Task flow to a Portlet
Hi All,
I'm using Jdev 11.1.1.6.0 and created a simple ADF application with one Taskflow which contains one JSF page to display the User details from the default LDAP configured within the Integrated Weblogic Server. The Taskflow have one Parameter to accept the User Email Id as input. Based on the given input value, we will fetch the User details from Weblogic server and display in the JSF Page. I created a portlet out of Taskflow by "Create Portlet Entry" and deployed it onto Integrated Weblogic server.
Portlet works well when executed standalone for the given User Email Id values as input.
Then I created a webcenter Application, On a page, there is a task flow that contains a form with one input text field and one Submit button, and a portlet (that displays the User details from LDAP) that listens for user input from the form. Clicking the Submit button sends the user entered texts to the listening portlet. This is a combination of contextual events established by the producer (task flow) and the wiring of the portlet based parameters from within the consuming page definition file.
The taskflow page which contains the form with Submit button, within the page defintion file contains an event binding (submitEventBinding) and a contextual based event (submitEvent). This event is tied to the ActionListener of the commandButton.
After added both the task flow and the portlet onto a page, I have subscribed to the contextual event of the task flow, and completed the wiring of the Taskflow and Portlet events together.
But in the Form, when I enter the User Email Id in the input filed and click the Submit button, I'm getting the below error -
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RESTORE_VIEW 1
java.lang.NullPointerException
at oracle.portlet.bridge.adf.lifecycle.ADFBridgePhaseListener.afterPhase(ADFBridgePhaseListener.java:74)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:995)
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRequest(BridgeImpl.java:903)
at javax.portlet.faces.GenericFacesPortlet.doBridgeDispatch(GenericFacesPortlet.java:678)
at javax.portlet.faces.GenericFacesPortlet.doRenderDispatchInternal(GenericFacesPortlet.java:644)
at javax.portlet.faces.GenericFacesPortlet.doView(GenericFacesPortlet.java:280)
at javax.portlet.GenericPortlet.doDispatch(GenericPortlet.java:328)
at javax.portlet.faces.GenericFacesPortlet.doDispatch(GenericFacesPortlet.java:251)
at javax.portlet.GenericPortlet.render(GenericPortlet.java:233)
at oracle.portlet.bridge.adf.application.ADFBridgePortlet.render(ADFBridgePortlet.java:255)
at com.bea.portlet.container.PortletStub.doRender(PortletStub.java:1012)
at com.bea.portlet.container.FilterChainGenerator.runFilterChain(FilterChainGenerator.java:127)
at com.bea.portlet.container.PortletStub.render(PortletStub.java:438)
at com.bea.portlet.container.AppContainer.renderStub(AppContainer.java:1158)
at com.bea.portlet.container.AppContainer.invokeRender(AppContainer.java:1090)
at com.bea.wsrp.producer.adapter.javaportlet.JavaPortletAdapter.doGetMarkup(JavaPortletAdapter.java:294)
at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doGetMarkup(MarkupServiceHandler.java:449)
at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doService(MarkupServiceHandler.java:264)
at com.bea.wsrp.producer.handlers.AbstractServiceHandler.service(AbstractServiceHandler.java:71)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:349)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:250)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:208)
at oracle.portlet.server.adapter.web.WSRP_v2_Markup_PortTypeSoapToEndpoint.getMarkup(WSRP_v2_Markup_PortTypeSoapToEndpoint.java:74)
at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.invoke_getMarkup(WSRP_v2_Markup_Binding_SOAP_Tie.java:1055)
at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.processingHook(WSRP_v2_Markup_Binding_SOAP_Tie.java:1460)
at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:299)
at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:442)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1112)
at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:333)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:233)
at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:185)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:485)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.portlet.producer.container.endpoint.ProducerEndpointFilter.doFilter(ProducerEndpointFilter.java:36)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<ProducerLogger> <internalServerError> Internal Server Error:
javax.servlet.ServletException: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request
at com.bea.portlet.container.PortletStub.render(PortletStub.java:526)
at com.bea.portlet.container.AppContainer.renderStub(AppContainer.java:1158)
at com.bea.portlet.container.AppContainer.invokeRender(AppContainer.java:1090)
at com.bea.wsrp.producer.adapter.javaportlet.JavaPortletAdapter.doGetMarkup(JavaPortletAdapter.java:294)
at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doGetMarkup(MarkupServiceHandler.java:449)
at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doService(MarkupServiceHandler.java:264)
at com.bea.wsrp.producer.handlers.AbstractServiceHandler.service(AbstractServiceHandler.java:71)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:349)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:250)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:208)
at oracle.portlet.server.adapter.web.WSRP_v2_Markup_PortTypeSoapToEndpoint.getMarkup(WSRP_v2_Markup_PortTypeSoapToEndpoint.java:74)
at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.invoke_getMarkup(WSRP_v2_Markup_Binding_SOAP_Tie.java:1055)
at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.processingHook(WSRP_v2_Markup_Binding_SOAP_Tie.java:1460)
at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:299)
at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:442)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1112)
at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:333)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:233)
at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:185)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:485)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.portlet.producer.container.endpoint.ProducerEndpointFilter.doFilter(ProducerEndpointFilter.java:36)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request
at javax.portlet.faces.GenericFacesPortlet.doBridgeDispatch(GenericFacesPortlet.java:681)
at javax.portlet.faces.GenericFacesPortlet.doRenderDispatchInternal(GenericFacesPortlet.java:644)
at javax.portlet.faces.GenericFacesPortlet.doView(GenericFacesPortlet.java:280)
at javax.portlet.GenericPortlet.doDispatch(GenericPortlet.java:328)
at javax.portlet.faces.GenericFacesPortlet.doDispatch(GenericFacesPortlet.java:251)
at javax.portlet.GenericPortlet.render(GenericPortlet.java:233)
at oracle.portlet.bridge.adf.application.ADFBridgePortlet.render(ADFBridgePortlet.java:255)
at com.bea.portlet.container.PortletStub.doRender(PortletStub.java:1012)
at com.bea.portlet.container.FilterChainGenerator.runFilterChain(FilterChainGenerator.java:127)
at com.bea.portlet.container.PortletStub.render(PortletStub.java:438)
... 57 more
Caused by: javax.portlet.faces.BridgeException: java.lang.NullPointerException
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:1002)
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRequest(BridgeImpl.java:903)
at javax.portlet.faces.GenericFacesPortlet.doBridgeDispatch(GenericFacesPortlet.java:678)
... 66 more
Caused by: java.lang.NullPointerException
at oracle.portlet.bridge.adf.lifecycle.ADFBridgePhaseListener.afterPhase(ADFBridgePhaseListener.java:74)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:995)
... 68 more
*<HTTPClientTransport> <invoke> A request to the producer URL "http://localhost:7101/UserProfilePOC-ViewController-context-root/portlets/WSRP_v2_Markup_Service" resulted in a status 500 response with fault string "Internal Server Error: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request.; nested exception is:*
* javax.servlet.ServletException: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request". The fault code given was "{urn:oasis:names:tc:wsrp:v2:types}OperationFailed". The producer generated a timestamp of 2012-12-03T14:49:27.557+05:30 and associated the following stack trace with the fault message: com.bea.wsrp.faults.OperationFailedException: Internal Server Error: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request.; nested exception is:*
* javax.servlet.ServletException: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request*
at com.bea.wsrp.producer.adapter.javaportlet.JavaPortletAdapter.doGetMarkup(JavaPortletAdapter.java:315)
at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doGetMarkup(MarkupServiceHandler.java:449)
at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doService(MarkupServiceHandler.java:264)
at com.bea.wsrp.producer.handlers.AbstractServiceHandler.service(AbstractServiceHandler.java:71)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:349)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:250)
at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:208)
at oracle.portlet.server.adapter.web.WSRP_v2_Markup_PortTypeSoapToEndpoint.getMarkup(WSRP_v2_Markup_PortTypeSoapToEndpoint.java:74)
at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.invoke_getMarkup(WSRP_v2_Markup_Binding_SOAP_Tie.java:1055)
at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.processingHook(WSRP_v2_Markup_Binding_SOAP_Tie.java:1460)
at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:299)
at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:442)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1112)
at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:333)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:233)
at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:185)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:485)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.portlet.producer.container.endpoint.ProducerEndpointFilter.doFilter(ProducerEndpointFilter.java:36)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.servlet.ServletException: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request
at com.bea.portlet.container.PortletStub.render(PortletStub.java:526)
at com.bea.portlet.container.AppContainer.renderStub(AppContainer.java:1158)
at com.bea.portlet.container.AppContainer.invokeRender(AppContainer.java:1090)
at com.bea.wsrp.producer.adapter.javaportlet.JavaPortletAdapter.doGetMarkup(JavaPortletAdapter.java:294)
... 54 more
Caused by: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request
at javax.portlet.faces.GenericFacesPortlet.doBridgeDispatch(GenericFacesPortlet.java:681)
at javax.portlet.faces.GenericFacesPortlet.doRenderDispatchInternal(GenericFacesPortlet.java:644)
at javax.portlet.faces.GenericFacesPortlet.doView(GenericFacesPortlet.java:280)
at javax.portlet.GenericPortlet.doDispatch(GenericPortlet.java:328)
at javax.portlet.faces.GenericFacesPortlet.doDispatch(GenericFacesPortlet.java:251)
at javax.portlet.GenericPortlet.render(GenericPortlet.java:233)
at oracle.portlet.bridge.adf.application.ADFBridgePortlet.render(ADFBridgePortlet.java:255)
at com.bea.portlet.container.PortletStub.doRender(PortletStub.java:1012)
at com.bea.portlet.container.FilterChainGenerator.runFilterChain(FilterChainGenerator.java:127)
at com.bea.portlet.container.PortletStub.render(PortletStub.java:438)
... 57 more
Caused by: javax.portlet.faces.BridgeException: java.lang.NullPointerException
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:1002)
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRequest(BridgeImpl.java:903)
at javax.portlet.faces.GenericFacesPortlet.doBridgeDispatch(GenericFacesPortlet.java:678)
... 66 more
Caused by: java.lang.NullPointerException
at oracle.portlet.bridge.adf.lifecycle.ADFBridgePhaseListener.afterPhase(ADFBridgePhaseListener.java:74)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:995)
... 68 more
*<PortletRenderer> <setErrorState> An error has occured for Portlet Binding portlet2.*
oracle.portlet.client.container.PortletRemoteException: oracle.portlet.server.container.OperationFailedException: oracle.portlet.wsrp.v2.OperationFailedException: Internal Server Error: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request.; nested exception is:
* javax.servlet.ServletException: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request*
at oracle.portlet.client.techimpl.wsrp.WSRPBaseTerminalPipe.processException(WSRPBaseTerminalPipe.java:41)
at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.execute(WSRPGetMarkupPipe.java:267)
at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.pre(WSRPGetMarkupPipe.java:51)
at oracle.portlet.client.service.pipeline.PipeContext.internalExecute2(PipeContext.java:650)
at oracle.portlet.client.service.pipeline.PipeContext.access$000(PipeContext.java:48)
at oracle.portlet.client.service.pipeline.PipeContext$1.run(PipeContext.java:498)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:74)
at oracle.security.jps.internal.jaas.CascadeActionExecutor$SubjectPrivilegedExceptionAction.run(CascadeActionExecutor.java:83)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.security.Security.runAs(Security.java:61)
at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:51)
at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:56)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity.executeAs(AbstractSubjectSecurity.java:138)
at oracle.portlet.client.service.pipeline.PipeContext.internalExecute(PipeContext.java:502)
at oracle.portlet.client.service.pipeline.PipeContextRunnable.run(PipeContextRunnable.java:23)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:391)
at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:416)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.portlet.server.container.OperationFailedException: oracle.portlet.wsrp.v2.OperationFailedException: Internal Server Error: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request.; nested exception is:
javax.servlet.ServletException: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request
at oracle.portlet.wsrp.v2.ServerToWSRPv2.getMarkup(ServerToWSRPv2.java:6703)
at oracle.portlet.client.connection.wsrp.ActivityServerWrapper.getMarkup(ActivityServerWrapper.java:1812)
at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.execute(WSRPGetMarkupPipe.java:135)
... 22 more
Caused by: oracle.portlet.wsrp.v2.OperationFailedException: Internal Server Error: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request.; nested exception is:
javax.servlet.ServletException: javax.portlet.PortletException: doBridgeDispatch failed: error from Bridge in executing the request
at oracle.portlet.wsrp.v2.WSRP_v2_Markup_PortTypeJaxbToSoap.getMarkup(WSRP_v2_Markup_PortTypeJaxbToSoap.java:136)
at oracle.portlet.wsrp.v2.ServerToWSRPv2.getMarkup(ServerToWSRPv2.java:6535)
... 24 more
Caused by: oracle.portlet.wsrp.v2.soap.OperationFailed
at oracle.portlet.wsrp.v2.soap.runtime.WSRP_v2_Markup_PortType_getMarkup_Fault_SOAPSerializer.deserializeDetail(WSRP_v2_Markup_PortType_getMarkup_Fault_SOAPSerializer.java:299)
at oracle.j2ee.ws.common.encoding.SOAPFaultInfoSerializer.doDeserializeSOAP11(SOAPFaultInfoSerializer.java:133)
at oracle.j2ee.ws.common.encoding.SOAPFaultInfoSerializer.doDeserialize(SOAPFaultInfoSerializer.java:95)
at oracle.j2ee.ws.common.encoding.ObjectSerializerBase.deserialize(ObjectSerializerBase.java:194)
at oracle.j2ee.ws.common.encoding.ReferenceableSerializerImpl.deserialize(ReferenceableSerializerImpl.java:148)
at oracle.portlet.wsrp.v2.soap.runtime.WSRP_v2_Markup_Binding_SOAP_Stub._readBodyFaultElement(WSRP_v2_Markup_Binding_SOAP_Stub.java:723)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:396)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:148)
at oracle.portlet.wsrp.v2.soap.runtime.WSRP_v2_Markup_Binding_SOAP_Stub.getMarkup(WSRP_v2_Markup_Binding_SOAP_Stub.java:341)
at oracle.portlet.wsrp.v2.WSRP_v2_Markup_PortTypeJaxbToSoap.getMarkup(WSRP_v2_Markup_PortTypeJaxbToSoap.java:86)
... 25 more
Please help me to resolve this error and let me know if you need any more details.
Regards,
UdayaHere is the solution
<spartacus:taskDetails row="#{row}" submissionId="#{row.bindings.SubmissionId.inputValue}" >
<!-- FACET ho HANDLE MS LANDING PAGE ACTION EVENT -->
<f:facet name="loadMSPageLink">
<af:commandLink id="cl29" text="#{row.bindings.FullTitle.inputValue}"
styleClass="home-title"
actionListener="#{pageFlowScope.homepagebean.navigateToMSLandingPage}">
<f:attribute name="submissionId"
value="#{row.bindings.SubmissionId.inputValue}"/>
</af:commandLink>
</f:facet>
<!-- FACET ho HANDLE LOAD USER PROFILE ACTION EVENT -->
<f:facet name="loadUserProfile">
<af:commandLink id="cl10" text="#{row.bindings.EditorName.inputValue}" actionListener="#{pageFlowScope.homepagebean.loadUserProfile}" styleClass="link-class">
<f:attribute name="editorName"
value="#{row.bindings.EditorName.inputValue}"/>
</af:commandLink>
</f:facet>
</spartacus:taskDetails>
<af:spacer height="5px" id="s39"/>
<af:facetRef facetName="loadMSPageLink"/>
<af:spacer height="5px" id="s40"/>
<af:panelGroupLayout id="pgl57" layout="horizontal">
<af:outputText value="#{viewcontrollerBundle.EDITOR}" id="ot37" styleClass="strong-style"/>
<af:spacer width="2px" id="s41"/>
<af:facetRef facetName="loadUserProfile"/>
<af:spacer width="2px" id="s42"/> -
I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve thisHi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Unable to pass parameter in oracle procedure through unix shell script
Hi Experts,
I have oracle procedure where in I have to pass the value of procedure parameter through unix script.
Follwoing is the sample procedure which i tried to exceute from the unix.
Procedure:
create or replace procedure OWNER.PRC_TESTING_OWNER(OWNER IN VARCHAR2) AS
sql_stmt varchar2(1000) := NULL;
v_count number := 0;
v_owner varchar2(100) := owner;
begin
sql_stmt:='select count(1) from '||v_owner||'.EMP@infodb where rownum<=10';
execute immediate sql_stmt into v_count;
DBMS_OUTPUT.PUT_LINE(sql_stmt);
DBMS_OUTPUT.PUT_LINE(v_count);
END;The script which I used is:
Unix
#!/bin/ksh
parm=$1
echo start
sqlplus -s scott@DEV/tiger <<EOF >>result_1.txt
set serveroutput on;
select '$parm' from dual;
exec owner.PRC_TESTING_OWNER('$parm');
EOFThe script is working fine that is i am able to pass to parameter value through unix shell script. :)
But if I want to pass the value of the owner in cursor , I am unable to pass this value through unix.
Following the procedure which i am trying to implement.
create or replace procedure OWNER.PRC_TESTING_OWNER(OWNER IN VARCHAR2) IS
v_owner varchar2(100) := owner;
CURSOR main_cur IS
select
i.ROWID rid ,
emp_name,
deptid
from v_owner.employee;
CURSOR subset_cur(c_deptid NUMBER ) IS
SELECT *
FROM v_owner.DEPT d
where d.dept_id=c_deptid;
--##main loop
FOR i IN main_cur LOOP
FOR j IN subset_cur(i.deptid) LOOP
BEGIN
insert into v_owner.RESULT_TABLE
END;
END LOOP;
END LOOP;How can i pass parameter value of the stored procedure through unix script(that is "owner" in this case), when these parameter value is
used in cursor? :(
Can anybody help me regarding the same?
Thanks in Advance !! :DIt's not the parameter in the cursor that is the problem, it's that you are trying to use static SQL for something that won't be known until run time (the owner of the table).
You would need to use something like ...
declare
l_owner varchar2(30) := 'SCOTT';
l_ref_cursor sys_refcursor;
type l_ename_tab is table of scott.emp.ename%type;
l_ename_array l_ename_tab;
begin
open l_ref_cursor for
'select ename
from ' || l_owner || '.emp';
loop
fetch l_ref_cursor bulk collect into l_ename_array limit 10;
exit when l_ename_array.COUNT = 0;
for x in 1 .. l_ename_array.count
loop
dbms_output.put_line(l_ename_array(x));
end loop;
end loop;
close l_ref_cursor;
end;
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLER
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01 -
How to pass attribute values through variables in JSP Custom TagLib
Hi,
Can anybody help me how to pass values through varuables in the jsp custom tag.
i am using JSP custom tag. I am unable to pass attribute values through variables.
<invitation:invdetails invid="<%=invid%>"/> The value is passing as <%=invid%> ,not value of the invid.
But i am getting throuh the fllowing
<invitation:invdetails invid='1' />
Please anybody suggest me how to pass value by using the variable.Hi,
It sounds like you need to set the <rtexprvalue> tag to true in the TLD for your tag. If you do this the tag will read in the value you are trying to pass to it.
dapanther... -
SSAS report action to pass multi-value list of dimention key values to a SSRS report parameter
This was originally posted on StackOverflow and suggested I try here as well.
I want to create a report action in an SSAS OLAP cube that generates a list of formatted values to pass into an SSRS report parameter that accepts a multi-valued parameter list. This would be applied at the
cell level in the SSAS action. I have found a solution that gets me most of the way:
How to Pass Multiple Values from an SSAS Report Drill Through Action to an SSRS Multi-Value Parameter, but not quite. The action does appear in Excel and works
if I run the action from a cell that is at or below the dimension attribute I am generating the list for, in this case,
Account Key.
Below is a link to a screen capture (unable to embed it due to lack of reputation) showing the action and dimension structure in Excel. The action works as long as I run it at the
Account Key level or below. I want to be able to run it at higher levels, such as
Account Major and still have it generate all then related Account Key values for the SSRS report parameter. Running it at the higher
Account Major level does not trigger the report to run.
Excel Action Screen Shot:
http://i.stack.imgur.com/QCGSp.png
Below is the MDX I am using to generate the value for the report parameter:
UrlEscapeFragment(
GENERATE(
DESCENDANTS(
[Account].[Account Key].CurrentMember,
[Account].[Account Key].[Account Key]
[Account].[Account Key].CURRENTMEMBER.Name,
"&rp:Account="
I am hoping that I can somehow modify the MDX above to make it return all the
Account Keys for any attribute of the Account dimension when ran from any measure cell, not just when ran at self and children of
Account Key in the pivot table.
Also, if it helps, I can execute the following MDX query on the cube and get the results I am looking for.
WITH MEMBER [Measures].[Account Key List] as
GENERATE(
DESCENDANTS([Account].[Account].CurrentMember, [Account].[Account].[Account]),
[Account].[Account].CURRENTMEMBER.NAME,
"&rp:Account=")
SELECT {[Measures].[Account Key List]} on 0,
([Account].[Account Company Number].[Account Company Number],[Account].[Account Major].[Account Major]
) on 1
FROM [Company 10 Action Demo]
Below are partial results:
10.116&rp:Account=10.116.010
10.117&rp:Account=10.117.010&rp:Account=10.117.020
10.120&rp:Account=10.120.005&rp:Account=10.120.006&rp:Account=10.120.010&rp:Account=10.120.020&rp:Account=10.120.030&rp:Account=10.120.040&rp:Account=10.120.050&rp:Account=10.120.060&rp:Account=10.120.380&rp:Account=10.120.999
10.123
Questions
Any ideas what I might need to do to get Account Key to be returned for any attribute of the
Account dimension?
Would I possibly have to alter my Account dimension in the cube to get this to work?
Thanks in advance.
Edit 1 - Adventure Works Cube Version
I was unable to get the suggested answer with the "Exists" function to work. To better demonstrate this issue, I have recreated it using the Adventure Works Cube.
I will focus on the Customer dimension, specifically the Customer and
Education attributes. I created a report action called Test Report Action. Below is the XML created for it in the cube.
<Action xsi:type="ReportAction" dwd:design-time-name="f35ad5ee-5167-4fb8-a0e0-0a74cc6e81c6">
<ID>Report Action 1</ID>
<Name>Test Report Action</Name>
<TargetType>Cells</TargetType>
<Target></Target>
<Type>Report</Type>
<ReportServer>SQLSERVER</ReportServer>
<Path>ReportServer?/Test Report</Path>
<ReportParameters>
<ReportParameter>
<Name>Test Customer Existing</Name>
<Value>UrlEscapeFragment(
GENERATE(
EXISTING DESCENDANTS(
[Customer].[Customer].CurrentMember,
[Customer].[Customer].[Customer]
[Customer].[Customer].CURRENTMEMBER.Name,
"&rp:Customer="
)</Value>
</ReportParameter>
</ReportParameters>
<ReportFormatParameters>
<ReportFormatParameter>
<Name>rs:Command</Name>
<Value>Render</Value>
</ReportFormatParameter>
<ReportFormatParameter>
<Name>rs:Renderer</Name>
<Value>HTML5</Value>
</ReportFormatParameter>
</ReportFormatParameters>
</Action>
Below are the steps to re-create the issue.
Connect to the cube in Excel
Add dimension Customer -> More Fields -> Customer
Add measure Internet Sales -> Internet Sales Amount
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action" and see customer values created for URL
When the action is ran at this point with Customer, I see the values created in the URL shown message box (since there is no SSRS report server at location specified).
Now the part I'm unable to resolve
Remove the Customer dimension and add Customer -> Demographic -> Education
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action"
Nothing happens. If I ran the action on the cell next to "Bachelors", I would want it to build up all the list of all the "Customers" that make up the "Bachelors" in the
Customer dimension as part of the report parameter. If no attributes where used in the cube from the
Customer dimension for that cell, then I would like it to return "All Customers", or something similar to show that all customers are included in the aggregations.
I am not too MDX savvy, thus far. I think I need to somehow join the
Customers to Internet Sales Amount in the Generate function portion. I have tried several different combinations of the
Customer dimension and Internet Sales Amount, along with various functions to see if I could get this to work with no success. I am hoping that someone more knowledgeable the me will have a solution. If you need more details,
please ask and I will provide them.Simon,
Thanks for you help with this. This morning I found a workaround. Below describes what that is.
What I ended up doing was getting a list of values from a degenerate dimension that I could use to pass to SSRS to get a list of transactions for a report. Below is how I did this, in relation to the Adventure Works cube using the degenerate dimension
Internet Order Details.
WITH MEMBER [Measures].[Order Param List] AS
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
SELECT {[Measures].[Order Param List], [Measures].[Internet Sales Amount]} ON 0
,([Date].[Calendar].[Date]) ON 1
FROM [Adventure Works]
This will get a list of Sales Order Number in a text string, separated by "&rp:OrderNum=" for each measure of
Internet Sales. This would allow me to create an SSRS report to bring back detail information for each
Sales Order Number. Below are some sample results.
May 16, 2007 SO50493&rp:OrderNum=SO50494&rp:OrderNum=SO50495&rp:OrderNum=SO50496&rp:OrderNum=SO50497&rp:OrderNum=SO50498&rp:OrderNum=SO50499&rp:OrderNum=SO50500 $12,157.80
May 17, 2007 SO50501&rp:OrderNum=SO50502&rp:OrderNum=SO50503&rp:OrderNum=SO50504&rp:OrderNum=SO50505&rp:OrderNum=SO50506&rp:OrderNum=SO50507&rp:OrderNum=SO50508 $13,231.62
May 18, 2007 SO50509&rp:OrderNum=SO50510 $4,624.91
With this, I can then create a Report Action in SSRS with a Parameter Value of
UrlEscapeFragment(
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
The way I was going about it before was flawed, as I was trying to get a list of the granular values from each dimension used to build the measure value and pass each one of those as separate parameters. I just needed to set something unique for each fact
measure transaction that represents the value and uses that in a query parameter for the SSRS report. -
How to pass a value from the report to a form ( BIT OF URGENT ).
Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
KrishnaHi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.
Maybe you are looking for
-
I'm getting this message " We are unable to validate this serial number for Lightroom . Please contact Customer Support " when installing on my Mac
-
Mass change of condition master record
Hi I have an requiremnt that i need to change the date and time in the output condition records from 4 to 3 for all the condition type in V2 applications . pls let me know can it be done like MASS changes in customer master regards Baranidharan
-
Hi i'm wondering what is the format of a for loop in jstl. for example: my for loop: for(int i = 0; i< stringArray.Length(); i++){ i++; thanks
-
CS6 spinning "busy" cursor while saving in background.
On Mountain Lion and Mavericks GM, Photoshop CS6 displays (flickers) the spinning "busy" cursor while either auto-saving or saving in the background. The cursor is the Adobe black dot variety, not the OSX beach ball. It flickers rapidly between the
-
How many windows server 2014 , datacenter needed for setting three pysical servers
I have three new rack server ,each with two processor , each processor has 8 cores. the question:- how many WinSvrDataCtr 2014R2 needed?