Unable To Print Over Ethernet Network on HP 6520 all in one

All computers are on windows 8.1. My question or issue is this: Prior to purchasing a Mediabridge wireless router, wireless-n broadband 300 mps router, I had a Zyxtel wireless access point router. I am both Ethernet and wireless. Prior to the Mediabridge I would network print to my HP printer both wireless (iPhone) and over an Ethernet network (PC's and Laptop).
There is an improvement in printing wirelessly on an iPhone. I cannot print over my Ethernet network any longer. I have to unplug my laptop prior to printing before my laptop can see the printer online. With my second PC in another room I am unable to print over the Ethernet network. The printers are installed, drivers and such, but as with the laptop, I would have to unplug the Ethernet cord to print.
My error messages are showing as cannot find printer or or my control panel printer devices show as offline. If I unplug my laptop I can see the printers online. However I don't want to have to take disconnect a second PC in another room to print.
Can you offer any suggestions. Do I need to plug my printer directly into the Mediabridge wireless router?
Nancy
This question was solved.
View Solution.

Hi Nancyh1030,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Photosmart 6520 Printer and getting the error and not printing. Here is a link to the HP Print and Scan Doctor. The HP Print and Scan Doctor will run a check on your system and connect the printer to same network as the computer. You do have to be connected to the same wireless as the printer to print to it. Unless you are using Eprint. If this does not help you contact Mediabridge.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

IMac G5 no longer prints to laser printer over ethernet network

I have a small office with 6 iMacs networked via ethernet with a Netgear Router. Printers are connected to one machine and people send to print over the network.
3 iMacs are G5. 3 are Intel. All run OS X 10.5.8.
A month ago one of the G5 iMacs stopped being able to print to a Brother laser printer (which is connected by USB to an Intel iMac). I believe this happened after we downloaded a periodic Apple update. About 2 weeks ago a second G5 iMac developed the same problem. The 1st G5 iMac still prints fine to an inkjet printer connected directly to it by USB.
We have tried re-loading drivers, but no improvement.
Any suggestions as to how we can resolve this?

Hi DaddyPaycheck
The iMacs that can't print can see the printer. We have deleted and re-installed via the printer system prefs too. There weird thing is that you can select the printer and send to print, but for some reason the printer then automatically pauses and you can't resume it. The file is listed by the status is 'stopped'. When you open the printer queue on the Intel iMac that the laser printer is connected to, no print file shows up at all...
We also ran the network diagnostic that you can do when in printer system prefs and that reported that "the G5 iMac could connect to the internet, but not the Server "brother HL 4040CN series-1@ben's-iMac-2.ipp.tcp.local" "
Hope there's a clue in there somewhere...
R

Can't print with adhoc network for HP 7780 all-in-one

Operating system is Windows Vista 32 bit.
Downloaded full driver software from HP site and installed it OK with wired connection to printer. All works fine in this mode.
Now I want to do wireless printing via an adhoc network called MYNetwork that I generated on my computer with WEP security. The printer detected the network, I put in the 5-digit password on the printer control panel, and the network was then connected. It shows connected on my computer also.
So now I am connected to the adhoc network, what are the next steps to make the printer show "online" and to actually print wirelessly? I really feel dumb asking this, as the answer must be simple. PLEASE Help!!
Note that I have completely disconnected the wired connection from the printer to the computer.
Thanks,
Garry

1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to print web pages on HP Photosmart plus all in one B209

hi, i can print from any file on my machine all test pages print ok etc...but will not print any web pages..then suddenly for no reason it will..
made sure
all windows updates are on there
tried deleting browsing history and cookies
tried new printer plug
tried turning off and on
tried removing the software and printer and drivers and reinstalling
i cannot seem to figure out why it will all of a sudden print a webpage then not, I am using the same web pages just as trials sometimes prints then nothing..
where am i going wrong?? please

Hi,
What internet browser are you using to print webpages? Is it Mozilla Firefox?
Kiko

Unable to print a landscape document on my HP all-in-one printer

Since upgrading to Mavericks I cannot print in Landscape. My printer in a HP All-in-one 5520

Did you download latest Mavericks driver from HP site?

Print over ethernet network

I'm wanting to print to an HP LaserJet 1200 printer, connected by an IOGear USB Print Server to an Ethernet hub, which is connected to my MacBook. I understand that AppleTalk is no longer an option in Mac OS X 10.6, but is there any other way to print to this printer with it's current configuration?

I'm gonna tell you what I did when I had a problem with a print server not long ago. First step: cross your fingers! Then...
System Preferences > Print & Fax
- Press the '+' button.
- Click on 'Default' at the top left corner. It should be listed there your print server's port name as a printer name and under the Kind field it should be written Bonjour.
- Select your print server and the printer driver (be shure the picture matches your printer exactly). Click 'Add'.
- Print a test page.
Of course your print server should be configured to allow your computer to print. In other words, your MAC address has to be allowed.
Hope this helps...

HP LJ CP1215 Unable To Print over Network Sharing

I'm having trouble with my CP1215 printing over the network via microsoft sharing. It was working fine and then one day stopped working. I've already removed it and re-installed it on the remote PC with window XP and removed a re-installed the physical connection and the software and drivers on the host PC with Windows XP, as well. The host computer has no trouble printing anything. The remote computer can't even print a test page. When I send a job to the printer from the remote computer it appears in the print queue on the host computer as "Printing" but hangs there for a minute or two and eventually disappears and nothing happens on the printer itself. Firewalls have all been turned off/disabled during tests, as well. Anyone have any ideas?

bcoffee wrote:
No one has any ideas on this? From looking around in Google a bit, this seems to be common, but no one has had any answer for it yet.
I just talked to HP. I had to set the cp1215 as the default printer on my wireless laptop for it to print.
As long as it is set to default printer it works fine, but if something else is the default, it goes to the cue and eventually disappears without printing.

Printing to shared windows printer over wireless network

Hi,
I just bought my wife a MacBook and recently updated it to Leopard (OS X 10.5). I have a Lexmark X5150 printer connected to a desktop PC running Windows XP. I can share files between the two computers no problem either wirelessly or through an ethernet connection through my router. But, I'm having troubles accessing the shared printer through the Macbook wirelessly. If I connect the printer directly to the Macbook, I can add the printer with appropriate drivers no problem. However, when I try to add the printer as Windows shared printer, the appropriate driver doesn't show up in the drop down list. I can navigate to and find the printer over the network fine, but I just can't find the right driver. I'm a newbie to Mac and was wondering if there is anyway to find the driver using Finder or something similar to determine where it physially resides on the Mac. I know it's there because it is automatically selected when I directly connect the printer to the Macbook and add the printer. Any thoughts??

Couldn't figure things out, so I'll just stick with connecting the printer directly to the macbook.

Airport won't print over the network

I have a basic HP Photosmart C4200 series printer. It works fine when I plug it directly into my computer but when I plug it into the router, it won't print and this message comes up : "Unable to read response header - short read"
When I delete/add the printer from Preferences, it finds the printer and establishes connection but when I try to print over the network, it gives me that error message.
A weird thing I found was that when connected to the airport, my printer shows up under the iDisks tab under the Airport Utilities instead of being in the Printers tab...

Welcome to the discussions!
A number of entry level printers are designed so that they will only work when they are connected directly to a computer, so that may possibly explain your problem.
To verify, you can work your way through Apple's troubleshooting guide to see if this is the case. If you've completed all the steps and still can't print, I think you have your answer.
http://support.apple.com/kb/TS1253
http://support.apple.com/kb/TS1253

Access Denied error when trying to print over the network

I just upgraded my Internet service and leased a new modem. My laptop is connected to the network and is able to browse the Internet. I have file and printer shared tuned on on both the desktop and the laptop. The printer is listed on my laptop, but I cannot print over the network to my HP PSC 1401 All In One. I get an Access Denied error even though the printer should still be connected to the network.

bump

Before I had Mavericks I was able to print over the network to a Windows PC. Now I receive the message, "connection refused." Any ideas?

Before I upgraded to Mavericks, I was able to print over the network to a printer attached to a Windows PC. Now, I receive the message, "connection refused." any ideas as to why this may be and what I can do about it would be appreciated.

I had reconfigured all of the settings the same as in the previous OS X. The only thing I can think of that may be causing this is that the printer is an older Canon Pixma iP4300 and the Canon site doesn't have a driver for the new OS X. The Canon site said that the new OS X may supply the driver. Is there any one with the same experience as mine?

Photosmart 6520 all in one not printing

Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartrige in it. I have tried restarting the printer, and the computer and it is not helping. Please help.

Hi Roselilith823,
I came across your post and was wondering, was the issue you were experiencing resolved?
Roselilith823 wrote:
Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartridge in it. I have tried restarting the printer, and the computer and it is not helping. Please help.
If you are still having difficulty, please call Phone support regardless of your printers warranty status. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know the outcome, and/or if the issue had already been resolved. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Can i print from my ipad through a Kodak all-in-one?

Is there an app that can enable me to print from my ipad using my Kodak all-in-one printer?

Only if it's on Apple's AirPrinter list.
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
 Cheers, Tom

Unable to print to USB printer over the network

Hi all,
I have an iMac and an Macbook Air, both running 10.6.4, and I've got an HP LaserJet 1200 printer connected to the iMac by USB. Both machines are on my home wireless network (Linksys, FWIW).
I seem to be unable to print to the LaserJet over the network from my Air. I've tried all manner of permutations of printer setup on the Air: IPP/LPD/HP JetDirect; entering the hostname (*.local) and the IP address of the host; leaving the queue blank and not; and leaving "Print Using" as generic vs selecting the LaserJet drivers. The printers appear in the "Default" Add Printer menu as Bonjour Shared, but this doesn't seem to work either.
Following other threads, I've tooled around with CUPS (resetting the configuration file, etc.), with no success. The other threads I've found on the subject seem to be more specifically addressed to folks trying to use an AirPort.
Any suggestions for what to try next?

In that case, let me elaborate on what happens when I try to set up the printer via Bonjour, in case there are any clues in the behavior that I'm seeing. The printer seems to appear twice in the "Default" pane, with Kind as 'Bonjour Shared' and Printer Names as follows:
HP LaserJet 1200 @ (hostname)
HP LaserJet 1200 @ (hostname) @ (hostname)
Selecting the first, it displays "Gathering printer information..." for a few minutes, then strikes out, suggesting Generic PostScript Printer rather than the correct driver. Whether I stick with that or select the correct driver manually and then try to print, it hangs on 'Copying print data..." (in the print queue).
Selecting the second, it gathers printer information only for a second or two before settling on Generic PostScript Printer. If I stick with Generic PostScript Printer, it hangs on 'Connected to printer...' but if I select the correct driver, it hangs on 'Copying print data...' again.

Can't Print Over Wireless Network to HP OfficeJet 6210 connected to XP Comp

I've been trying in vain for the better part of a week and a half to print from my MacBook Pro (w/ Leopard 10.5.5) over my wireless network (Linksys WRT54G Wireless Router) to an HP OfficeJet 6210 connected to my Dell Desktop running Windows XP SP3. I CAN however, both see and print to the printer with a PC laptop running Windows Vista. I've both re-installed and upgraded the drivers to the Windows XP desktop AND the MacBook Pro for the printer and still can't come to a conclusion. I am able to print to the printer from the MacBook Pro when plugged directly in via USB. I've tried to add the printer via "Windows" tab in printer configuration by choosing the network, then the computer, then entering the administrator accounts user name/password, however I'm still unable to print from the MacBook. Any ideas and suggestions would be greatly appreciated. Thanks!
Message was edited by: LukeZim

Hi LukeZim,
Sorry, but drivers on OS X aren't like on Windows (yet), where a driver is just a component in a system that works for all the comm protocols the computer can do. That's the way it would be if manufacturers provided CUPS drivers (CUPS is the print control system on OSX). But most manufacturers are still providing Carbon drivers - where the comm protocol is limited to what is put into the driver. HP provided a Carbon, USB-only driver for your printer. You'll need to use a third-party CUPS driver to use Windows Printing.
Gutenprint drivers (included with Leopard) are CUPS drivers, for example.
http://openprinting.org/showprinter.cgi?recnum=HP-OfficeJet6200
CUPS drivers:
http://www.linuxfoundation.org/en/OpenPrinting/macosx

Unable To Print Over Ethernet Network on HP 6520 all in one

Similar Messages

Maybe you are looking for