Unable to Process Event in OBIEE11g
Hi,
We are getting the following error "Unable to Process event" when applying multiple conditons on OBIEE dashboard and once this error appears we are logged off from the application also. We are using OBIEE 11.1.1.6.9 version. Please advise on how to resolve this issue.
Assume that we have a prompt with the values Yearly, Monthly and Daily. When we select the prompt value respective report should be displayed and hence we are using conditons here to achieve this dynamism.
This is unpublished bug 15916915 : CRASH IN DASHBOARDVIEWSUBMITCONDITIONFUNCTOR::GETCONDITIONCURSOR
check 1586350.1
Download and apply the latest bundle patch for OBIEE 11.1.1.6. Or install OBIEE 11.1.1.7.1 or later. For more information, see note 1488475.1 - OBIEE 11g: Required and Recommended Patches and Patch Sets.
If you cannot apply the latest bundle patch for OBIEE 11.1.1.6 or 11.1.1.7, download and apply patch 15916915 for OBIEE 11.1.1.6.7, 11.1.1.6.8 and 11.1.1.6.9 patch sets.
Thanks,
saichand
Similar Messages
-
Hello all,
We migrated our Exchange server from 2003 to 2010. After the mailbox move requests were finished we had one that was stuck. We basically skipped it as we had a lot of other things to finish over the weekend. Here we are a year later, the old exchange server
is gone and so is an old DC. I am receiving an error every four minutes in event viewer.
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '3e46b7cb-2ac0-42c1-98e8-57517a19ee40'
Database GUID: '5c6c573b-4f45-4ce3-b296-11cf69c2e2b6'
Error: Unable to find 'OLD Domain Controller' computer information in domain controller 'OLD Domain Controller' to perform the suitability check. Verify the fully qualified domain name..
I have checked in EMC for move requests. None are listed. I have checked the DCs listed in EMC properties. Old DC is not listed.
I also ran these commands in shell to attempt to cancel the stuck request.
Get-MoveRequest -MoveStatus Completed;Pending;InProgress;Failed;CompletedWithWarning;Suspended;Queued;CompletionWithProgress : Remove-MoveRequest
NO changes. Still throwing error. Any suggestions? I also tried using the guid and shell to look at the move request. Systems replies no such request.Hello,
Please try to restart iis services to check the result.
If the issue persists, I recommend you ping you DC server on your exchange server to check if your exchange server can communicate with your DC server.
If there are other DCs, please try to use set-adserversettings cmdlet to specify a DC for your exchange server.
Set-AdServerSettings
http://technet.microsoft.com/en-us/library/dd298063(v=exchg.150).aspx
Besides, please install the lasted rollup to check the result.
Cara Chen
TechNet Community Support -
The server was unable to process the request due to an internal error.
Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227
Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks ! -
HI all,
I ran into a problem with one of the servers in my DAG. Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server. The DAG continued to function on the other server. So this particular
DB01 had only some test accounts in it so I removed the database copy. Unfortunately the removal must not have completed correctly.
After recovering the needed space in the partition, I tried to recopy the database and it failed. So I deleted the entire database from the active server and it successfully removed it from the active server. Now on both the servers the database
is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists. I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
of the database (failed redundancy) but there should be zero copies.
This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists.
Can you point me to the location to clean this up?
Log Name: Application
Source: MSExchange Mailbox Replication
Date: 02/25/2011 2:00:07 PM
Event ID: 1006
Task Category: Service
Level: Warning
Keywords: Classic
User: N/A
Computer: email1.domain.com
Description:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: DB01
Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x3EB
Lid: 26937
Lid: 21921 StoreEc: 0x3EB
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 22086
Lid: 27206
Lid: 17990
Lid: 16966 StoreEc: 0x8004010F
Lid: 31433 StoreEc: 0x8004010F
Lid: 8620 StoreEc: 0x3EB
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x3EB
Lid: 26297
Lid: 16585 StoreEc: 0x3EB
Lid: 32441
Lid: 1706 StoreEc: 0x3EB
Lid: 24761
Lid: 20665 StoreEc: 0x3EB
Lid: 25785
Lid: 29881 StoreEc: 0x3EB
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Mailbox Replication" />
<EventID Qualifiers="32772">1006</EventID>
<Level>3</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
<EventRecordID>181576</EventRecordID>
<Channel>Application</Channel>
<Computer>email1.domain.com</Computer>
<Security />
</System>
<EventData>
<Data>DB01</Data>
<Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x3EB
Lid: 26937
Lid: 21921 StoreEc: 0x3EB
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 22086
Lid: 27206
Lid: 17990
Lid: 16966 StoreEc: 0x8004010F
Lid: 31433 StoreEc: 0x8004010F
Lid: 8620 StoreEc: 0x3EB
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x3EB
Lid: 26297
Lid: 16585 StoreEc: 0x3EB
Lid: 32441
Lid: 1706 StoreEc: 0x3EB
Lid: 24761
Lid: 20665 StoreEc: 0x3EB
Lid: 25785
Lid: 29881 StoreEc: 0x3EB </Data>
</EventData>
</Event>Hi
This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases.
Restarting the service will clear the cache.
Maybe it is the simplest way to solve it.
If it doesn’t work, you can try cmd to check it.
Get-MailboxDatabase : Can you find the database which you delete?
Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database. -
Hello,
We have a multi domain parent child AD domain infrastructure and now we upgraded our exchange from Exchange 2007 to Exchange 2013. Since last few days, we see the below error on the mailbox server event viewer.
EVENT ID : 1121
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '93a7d1ca-68a1-4cd9-9edb-a4ce2f7bb4cd'
Database GUID: '83d028ec-439d-4904-a0e4-1d3bc0f58809'
Error: An Active Directory Constraint Violation error occurred on <domain controller FQDN>. Additional information: The name reference is invalid.
This may be caused by replication latency between Active Directory domain controllers.
Active directory response: 000020B5: AtrErr: DSID-0315286E, #1:
Our Exchange setup is in parent domain, but we keep on getting this error for various domain controllers in each child domain in the same site. We then configured one of the parent domain domain controller on Exchange. Still we are getting this error for
the configured parent domain DC.
Verified the AD replication and there is no latency or pending stuffs.
Any support to resolve this issue will be highly appreciated. Thank you in advance.
Regards,
Jnana R DashHi,
In addition to Ed's suggestion, I would like to clarify the following things for troubleshooting:
1. Please restart IIS at first.
2. If the issue persists, please ping your DC on your Exchange server to check if Exchange can communicate with DC.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Since demoting a child domain a few days ago, Exchange 2013 is still trying to contact it and as a result generating errors in the application event logs. I had a similar problem which I solved by removing some old migration batches, now I have a problem
with the Microsoft Exchange Mailbox Replication service.
The event logged is:
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '0b6c0f5a-0563-48e2-8b97-e0781c6cc69a'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for
domain 'admin.riddlesdown.local'.. --> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or
configured incorrectly DNS server.
The domain doesn't exist in AD Sites and Services, I have removed all traces from DNS but this is still occurring. When I run Get-ADServerSettings | fl it reports no trace of the domain or a DC that was previously in it.
How can I stop these events occurring and is it likely to be causing something else not to work correctly.
We are running Exchange 2013 CU1No, that didn't work. Here are more details:
Source: MSExchange ADAccess (EventID: 2130)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or configured
incorrectly DNS server.
Source: MSExchange ADAccess (EventID: 2119)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Error DNS_ERROR_RCODE_NAME_ERROR (0x8007232B) occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain admin.riddlesdown.local
The query was for the SRV record for _ldap._tcp.dc._msdcs.admin.riddlesdown.local
Common causes of this error include the following:
- The DNS SRV records required to locate a domain controller for the domain are not registered in DNS. These records are registered with a DNS server automatically when a domain controller is added to a domain. They are updated by the domain controller
at set intervals. This computer is configured to use DNS servers with following IP addresses:
10.59.100.7
10.59.100.8
fec0:0:0:ffff::1Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::2Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::3Microsoft.Exchange.Directory.TopologyService.exe
- One or more of the following zones do not include delegation to its child zone:
admin.riddlesdown.local
riddlesdown.local
local
. (the root zone)
Source: MSExchange Mailbox Replication Service (EventID: 1121)
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '87f4b926-0621-43d3-afeb-fe475ee6d850'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
--> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Something is cause the Exchange server to go looking for our old domain, but what and why? -
Hi there,
I recently got a peculiar error when users tried to log-in into a SP 2010 portal using claims based authentication.
The following error is logged in the event viewer of the SP server in question:
Event ID 8306 - Claims authentication
An exception occurred when trying to issue security token: Server was unable to process request. ---> Index was outside the bounds of the array.
I also found an IIS warning entry with a similar message:
Event ID 1309 - Web Event
Exception type: FaultException
Exception message: Server was unable to process request. ---> Index was outside the bounds of the array.
I simply could not find an answer to why this happened, but an iisreset seemed to have fixed the issue. I was wondering if anyone here would know a possible root cause for this issue?
Thanks in advance for your help.
Regards,
P.Hi,
Thanks for posting your issue, Kindly browse below mentioned URLs to fix this issue
http://underthehood.ironworks.com/2011/05/sharepoint-2010-an-exception-occurred-when-trying-to-issue-security-token-the-server-was-unable-to-p-1.html
http://nearbaseline.com/blog/2011/01/claims-exception-occurred-issuing-a-security-token/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
Unable to process dimension - BPC 7 Microsoft
hello,
I've installed BPC 7.0 SP3 and dimension processing doesn't work. (SQL 2005 SP3 Enterprise, IIS 6, Windows 2003 SP2 Enterprise...)
Dimension processing stops at the beginning (step 1 - validating dimension) with this message: "An error has occurred during processing".
On BPC client computer, the log contained in "My DocumentsOutlookSoftLoggingAdminMemberProcess" shows these messages:
DetailMsg : {System.Web.Services.Protocols.SoapException: Server was unable to process request. --> Could not find file "D:BPCDataWebfoldersApShellAdminApp%CHANGED_DIM%.xls".
at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
at OSoft.Consumers.Admin.AdminMemberProcess50.Handle.OpenSheet(Boolean blnOpen, String strDimName)}
DetailMsg : {System.Exception: The system cannot find a cache file for this dimension.
at OSoft.Consumers.Admin.AdminMemberProcess50.Handle.GetInformation(ArrayList aryAppList, ArrayList aryDimList, String strDefaultDim, Boolean blnFullProcess, Boolean blnOpenSheet, Boolean blnIsOpened, ArrayList& aryOpenDim, String& sMessage)}
==============[System Error Tracing End ]==============
Has anyone seen this before ?
I'm able to modify/process and optimize Apshell applications and Server Manager and client diagnostics are OK. No error message in event logs... So where is the problem ?
Thanks for your help. R.
Edited by: Rémy PLAUCHU on Mar 25, 2009 8:50 AMHi Sorin
I have one server for SQL/OLAP and one server for Files, Web and Application.
I've offered EVERYONE all rights on folders.
BPC Setup puts XCEEDZIP.DLL in Websrvr in and
install guide tells to put ANTIXSSLibrary.dll in Websrvrweb in
Do you agree with that ?
I've put XCEEDZIP.DLL and ANTIXSSLibrary.dll in BOTH folders (but tell me if the rule above is enough) and now:
I don't have any more error message when opening BPC admin.And ADMINCACHE_.zip file is not destroyed any more when refreshing dimension client files. That's better...But...
...when I want to process dimensions I still have an error message but a little different:
{System.Exception: Cannot find dimension member sheet file; use the export dimension feature to restore it from the member table...}
Do we still need an OSOFT Share and if we need it, where ? On the folder above webfolders ?
Folders (but not files inside them), folders remain with "Read" property greyed and checked. I do not know why. Whenever I uncheck the folders and apply...close the window and re-open they seem to be still with this property "Read" greyed and checked... Is it normal ?
Thanks a lot for your help. R.
NB: with File Monitor tool from sysinternals (Microsoft) we can see that we are back to the first error:
if we are processing the account dimension for example, dllhost.exe will work with account.xls file, then with account.xls.zip file, account.xls.zip.001 file and account.xlsTemp_ file and then it fails to find the %CHANGED_DIM%.xls file...
Edited by: Rémy PLAUCHU on Mar 26, 2009 7:47 PM -
Unable to process message with internal message
I am trying to find more information about this error I see in the App log. There are thousands of entries with different message IDs.
I have searched Google/Technet and cannot find anything that references this error message. Does anyone have any pointers on where to go to find the account causing this?
Source: MSExchange Messaging Policies
Event ID: 8208
Task Category: RedirectionAgent
Unable to process message with internal message ID: XXXXXX. Mailbox System.Object[]'s ForwardingSmtpAddress %3 isn't valid. Active Directory may have been damaged.I have just started and taken over for the previous admin so am still learning the setup as well.
We have 3 Exchange 2010 servers (2 in the same location and one remote), all 3 have the same errors in event logs with varying message ids. Only 2 transport rules (One for large attachments and one to add a disclaimer) and both appear to be working correctly.
I was hoping to find a way to track down more information about the message based on the ID to see if I can find any similarities but have not found a way. I have found how to find the message ID based on sender/recipient/etc. but not the other way. -
OIM 11g - ldap sync - Post Process event handler 'CREATE' faillling
Hi Gurus,
We have ldap sync set up between OIM 11.1.1.5 and ODSEE 11g,
Post process event handler on user creation with is setting a attribute with random 16 digit character, This event handler is getting triggered and setting the attribute in OIM but in logs i can see "Modification failed because user 45118 is not synchronized to the LDAP directory." error and it is not updated in ODSEE.
This behaviour is only for trusted recon not for the User created through UI.
Not sure what exactly is happening..
Is it expected behavior??
Gurus help me out on this.IF it fail because event handler unable to produce random number then verify below
is eventhandler code being executed in trusted recon verify in log.
There are two method execute and bulk execute in eventhandler. execute is being called from UI and bulk execute is being called for trusted recon.
either put code in bulk execute or update batch recon size something like that system property to 1. so, it will function as UI. Default value of batch is 500
--nayan -
Exception Description: Unable to process XML tag [driver-class] with value
Hi
I'm newbie with TopLink. I try to write a litle application with TopLink:
- First, I create a session.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<toplink-sessions version="11g Technology Preview 3 (11.1.1.0.0)" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<session xsi:type="database-session">
<name>dbsession</name>
<event-listener-classes/>
<logging xsi:type="toplink-log"/>
<primary-project xsi:type="xml">META-INF/tlMap.xml</primary-project>
<login xsi:type="database-login">
<platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</platform-class>
<user-name>dev</user-name>
<password>F6A3DA7BA187330D4E11A713C42FF833</password>
<sequencing>
<default-sequence xsi:type="table-sequence">
<name>Default</name>
</default-sequence>
</sequencing>
<driver-class>oracle.jdbc.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@//10.10.10.31:1521/devdb1</connection-url>
<bind-all-parameters>false</bind-all-parameters>
<struct-converters/>
</login>
</session>
</toplink-sessions>
- Second, I create a Java Application ( Application1.java):
package project2;
import java.sql.ResultSet;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Vector;
import oracle.toplink.queryframework.DataModifyQuery;
import oracle.toplink.queryframework.SQLCall;
import oracle.toplink.queryframework.StoredProcedureCall;
import oracle.toplink.sessions.DatabaseSession;
import oracle.toplink.sessions.Session;
import oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader;
import oracle.toplink.tools.sessionmanagement.SessionManager;
import oracle.toplink.util.SessionFactory;
public class Application1 {
public Application1() {
public static void main(String[] args) {
// new Application1();
String statement = "SELECT motdepasse,login FROM bou_courtier";
SessionManager sessionmanager = SessionManager.getManager();
System.out.println("test");
// SessionFactory sessionfactory = new SessionFactory("META-INF/sessions.xml","dbsession");
DatabaseSession session = (DatabaseSession)sessionmanager.getSession(new XMLSessionConfigLoader(),"dbsession",Thread.currentThread().getContextClassLoader());
// Session session = sessionfactory.acquireSession();
System.out.println("test");
SQLCall sqlcall = new SQLCall(statement);
session.executeNonSelectingCall(sqlcall);
ResultSet rs = sqlcall.getResult();
try {
while(rs.next()){
String strPass = rs.getString(1);
String strLogin = rs.getString(2);
System.out.println("Password :"+strPass+"---"+"Login :"+strLogin);
} catch (SQLException e) {
// TODO
- Third, I build and run Application1.java in Jdevelopper 11g preview 3. Sadly, the result is a error:
Exception in thread "main" Local Exception Stack:
Exception [TOPLINK-9003] (Oracle TopLink - 11g Technology Preview 3 (11.1.1.0.0) (Build 071207)): oracle.toplink.exceptions.SessionLoaderException
Exception Description: Unable to process XML tag [driver-class] with value [oracle.jdbc.OracleDriver].
Internal Exception: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at oracle.toplink.exceptions.SessionLoaderException.failedToLoadTag(SessionLoaderException.java:83)
at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildDatabaseLoginConfig(TopLinkSessionsFactory.java:408)
at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildLogin(TopLinkSessionsFactory.java:336)
at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildDatabaseSessionConfig(TopLinkSessionsFactory.java:182)
at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildSession(TopLinkSessionsFactory.java:168)
at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildTopLinkSessions(TopLinkSessionsFactory.java:117)
at oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader.load(XMLSessionConfigLoader.java:239)
at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:448)
at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:311)
at project2.Application1.main(Application1.java:33)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildDatabaseLoginConfig(TopLinkSessionsFactory.java:405)
... 8 more
Process exited with exit code 1.
Can you help me to debug this error. Many thanks
user615555The internal error: "java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver"
is stating it can't find your driver jar file on the classpath. You'll need to check that you've included your Database driver in the list of libraries on your classpath.
Best Regards,
Chris -
Unable to Duplicate Events in Adobe Connect
Every time I try to duplicate an event I get:
Request Not Processed
The system was unable to process your request.
This happened last month. I would hate to have to enter everything again as this function has worked the last 6 months.This could be related to some permission issue with the associated content of the event.
Please check whether the content associated with the event is shared or private.
For duplicating a shared event (which has a private content associated), a user can duplicate such an event only when user has permission over the associated private content.
Thanks,
-Nitin -
Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please helpWait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.
-
We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A. -
My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
I'm out of ideas. Is there something else to try?Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars
Maybe you are looking for
-
PC not recognizing iphone as a digital camera
I am having the same issue with not being able to transfer my pics and video from my iphone onto my pc. I have read the many solutions posted in this forum but none have help me. I am able to sync to itunes but does not show up as a camera that is pl
-
Intermittent broadcast through Airport network
I have posted on this before, others have said they have the same problem, but still no solutions. Running iMac, iTunes, Airport Utility, all fully updated software and firmware. These problems have been around for at least 4 Leopard upgrades. Proble
-
Failed to resolve JCO destination name 'WD_FLIGHTLIST_RFC_METADATA_DEST' i
Dear all, When i was running a Wec dynpro Application created with The abap Function Modul BAPI_FLIGHT_GETLIST, a error "com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_FLIGHTLIST_RFC_M
-
Can't autofill songs to Gen 2 shuffle
I'm using a normal pc with win XP now with itune 7.3 installed. Its able to sync my shuffle when dock but always show error message of can't copy songs into shuffle with some numeric code kind of error. I have tried all ways to re install, re format,
-
The following error message came when I tried to open Firefox and install Firefox Home. "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"