Unable to read podcast in a row

Hi, I just receive my ipod 30gb black. My system is windows xp pro SP2 and I use Itunes 7.0.1.8 and ipod software is 1.2.
The problem I have is that I cannot read several podcasts in a row. In a list, I put some episode from my favorites podcast, and my ipod read one podcast and stop at the end of it.
And when i read a podcast, it shows "1 on 1" instead of "1 on 6" when there are 6 podcasts in a list.
Can we read several podcast in a row? Because with my 3G ipod it worked fine, I don't understand why it doesn't work.
Sorry for my poor english (I'm french...), and thanks for your help.

>
Currently running for 120 min - I have not used the NO LOGGING option as my DBA said we usually do not use it while creating indexes.
>
In general that is good advice. NOLOGGING should normally only be used when it is known that the data or action does not need to be recovered or when you plan to take an immediate backup after the operations.
Sometimes in a production system the lack of recovery is outweighed by the fact that the system is unavailable or unusable until the action is taken.
For an index the lack of recovery does not mean loss of data; an index can always be rebuilt from the data alone.
And if that is unusable you wouldn't want to recover it from the logs or a backup anyway.
For that use case any recovery for that index could be worse than having no index at all. So for a production emergency where you urgently need the index exceptions can be made and NOLOGGING used to get the system running properly as quickly as possible.

Similar Messages

Unable to read podcasts...

I was syncing my podcasts... and I got a message saying that the iPod couldn't read certain podcasts and wouldn't sync them. The podcast is subscribed through iTunes and I doubled check the format and it is mpeg4, i can watch it on my computer too.
any ideas as to why?

Just because your computer can play them, does not mean your ipod or iphone can read them. Just right click on the podcast and select convert and itunes will convert it to a standard that will sync across.
Hope that helps

Unable to read french characters

Im trying to reach data from an excel (using the Apache software's excel reader code) but my java code is not recognizing words like "D�cor". It is replacing '�' with '?'(All my columns are in English , it is just a couple of data entires like D�cor or caf� that bother me) . I use FileInputStream to read data-i cannot change that as it is required input for apache excel file reader. I thought java uses Unicode by default, but when i printed
(new OutputStreamWriter(new ByteArrayOutputStream())).getEncoding()
i got 'ASCII' as output. Could anyone help me out with this please?
-Aarthi

Just to add to it: this is the code I'm using
FileInputStream fis = new FileInputStream(fileName);
Workbook wb = new Workbook(fis);
Sheet sh = wb.getSheetAt(0);
Row row =null;
String strDesc = null;
for (int i = (firstRow + 1); i < lastRow; i++)
row = sh.getRow(i);
// line below is unable to read D�cor
strDesc = row.getCell((short) col1).getStringCellValue();
System.out.println("Desc -> " +strDesc );
}

Deleted Rows Flashback : unable to read data - table definition has changed

Hi All,
Its Really Important.
I Unfortunately truncated a table using
Trancate table mytable;
and Made a alter table to decrease data pricision length.
But i Need the tabla data back,
i used the below command to get deleted rows, it shows error.
query : select * from pol_tot versions between timestamp systimestamp-1 and systimestamp;
error : ORA-01466: unable to read data - table definition has changed
query : flashback table pol_tot to timestamp systimestamp - interval '45' minute;
error : ORA-01466: unable to read data - table definition has changed
Kindly Share your ideas How Can i Get thoose Deleted Records.
Edited by: 887268 on Jul 8, 2012 12:26 AM

BluShadow wrote:
Khayyam wrote:
Flashback dont works after DDL. Truncate command is DDL. Only recover from backup can help.Please don't spread untrue statements.Working of flashback after Drop command is so clear to say. I mean such DDL commands as CREATE, ALTER, TRUNCATE and so on...
"Remember that DDLs that alter the structure of a table (such as drop/modify column, move table, drop partition, truncate table/partition, and add constraint) invalidate any existing undo data for the table. If you try to retrieve data from a time before such a DDL executed, you will get error ORA-1466. DDL operations that alter the storage attributes of a table (such as PCTFREE, INITRANS, and MAXTRANS) do not invalidate undo data."
[http://docs.oracle.com/cd/B28359_01/appdev.111/b28424/adfns_flashback.htm#BJFJHDAG]

Sql loader unable to read from pipe

Hi All:
I'm using named pipe along with Oracle SQL*Loader to load some 20 millions rows into database.
The source of the pipe is from a Java application which write to the pipe using simple FileOutputStream.
It can be observed that the Oracle SQL*Loader need to wait a lot on the Java application to produce enough data for loading.
The waiting is fine. However, the Oracle SQL*Loader always exist after loading about 1 million rows with output like:
SQL*Loader-501: Unable to read file (upipe.dat)
SQL*Loader-560: error reading file
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
And in this case, the Java will throw IOException with information:
Exception in thread "main" java.io.IOException: Broken pipe
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(FileOutputStream.java:284)
It runs on Linux environment with 11g database.
Any idea why this will happen?

check
SQLLDR NOT LOADING ALL DATA IN DAT FILE : SQL*Loader-510/SQL*Loader-2026 [ID 741100.1]

XML Encoding from Business One - Unable to Read in a 3rd Party APP

Hi:
I have created an Add-On app that produces an XML document file when a new item is created or an existing item is updated. However, the 3rd party app that I am trying to integrate into is unable to read this XML. After doing some research, the following appears to be the issue.
SBO produces the data with UTF-16 which is a double byte encoding for XML's. The 3rd party app that I have appears to be able to handle only single byte encoding formats such as UTF-8 or ISO-8859-1.
I would like to know if there is a way in SDK to convert the output XML format to a single byte encoding such as ISO-8859-1. Can anyone please tell me how to achieve that in my Add-On code?
Thank you.
Kushal Dutta

Hi Kushal,
You can use a XLST transformation to convert from UTF-16 to UTF-8.
The coding goes something like this:
XmlReader xmlRdr = XmlReader.Create(new StringReader(sXML));
XmlWriterSettings xmlWtrSettings = new XmlWriterSettings();
xmlWtrSettings.Encoding = Encoding.Unicode;
XmlWriter xmlWtr = XmlWriter.Create(sOutFile, xmlWtrSettings);
XslCompiledTransform xslt = new XslCompiledTransform();
xslt.Load(sTransformFile);
xslt.Transform(xmlRdr, xmlWtr);
xmlWtr.Flush();
xmlWtr.Close();
xmlRdr.Close();
Where sXML is the XML string generated by the SBO GetAsXML method, sOutFile is the path and filename where the transformed XML will be created and sTransformFile is the path of the XLST file.
Assuming that you wish to retain the same XML structure as before, the XLST file should look something like the following:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
     <BOM>
          <xsl:for-each select="BOM/BO">
          <BO>
               <AdmInfo>
                    <Object>
                         <xsl:value-of select="AdmInfo/Object"/>
                    </Object>
               </AdmInfo>
               <ORDR>
                    <xsl:for-each select="ORDR/row">
                    <row>
                         <DocEntry>
                              <xsl:value-of select="DocEntry"/>
                         </DocEntry>
                         <DocNum>
                              <xsl:value-of select="DocNum"/>
                         </DocNum>
                         <DocDate>
                              <xsl:value-of select="DocDate"/>
                         </DocDate>
                         <DocDueDate>
                              <xsl:value-of select="DocDueDate"/>
                         </DocDueDate>
                         <DocStatus>
                              <xsl:value-of select="DocStatus"/>
                         </DocStatus>
                         <Cancelled>
                              <xsl:value-of select="CANCELED"/>
                         </Cancelled>
                         <CardCode>
                              <xsl:value-of select="CardCode"/>
                         </CardCode>
                         <CardName>
                              <xsl:value-of select="CardName"/>
                         </CardName>
                         <NumAtCard>
                              <xsl:value-of select="NumAtCard"/>
                         </NumAtCard>
                    </row>
                    </xsl:for-each>
               </ORDR>
               <RDR1>
                    <xsl:for-each select="RDR1/row">
                    <xsl:sort select="LineNum" />
                    <row>
                         <LineNum>
                              <xsl:value-of select="LineNum"/>
                         </LineNum>
                         <ItemCode>
                              <xsl:value-of select="ItemCode"/>
                         </ItemCode>
                         <Dscription>
                              <xsl:value-of select="Dscription"/>
                         </Dscription>
                         <Quantity>
                              <xsl:value-of select="Quantity"/>
                         </Quantity>
                         <WhsCode>
                              <xsl:value-of select="WhsCode"/>
                         </WhsCode>
                         <BaseType>
                              <xsl:value-of select="BaseType"/>
                         </BaseType>
                         <BaseEntry>
                              <xsl:value-of select="BaseEntry"/>
                         </BaseEntry>
                         <BaseLine>
                              <xsl:value-of select="BaseLine"/>
                         </BaseLine>
                         <FreeTxt>
                              <xsl:value-of select="FreeTxt"/>
                         </FreeTxt>
                    </row>
                    </xsl:for-each>
               </RDR1>
          </BO>
          </xsl:for-each>
     </BOM>
</xsl:template>
</xsl:stylesheet>
The above example shows a XLST transform for the sales order document type. This example is for use with the xet_ValidNodesOnly setting for the XmlExportType company property. If you are using a different XmlExportType setting then the XLST will be slightly different but the principal is the same. For simplicity, I have shown only a cut-down list of the fields from the sales order but other fields and tables can be included (assuming that they are in the original XML from SBO).
Kind Regards,
Owen
P.S. Sorry for the lack of indentation on the XML file. It was there when I created this post but the forum removes the indentation.

Unable to Download Podcasts Since 9.0.2 - No "Get Episode" Button

Ever since the update to 9.0.2, I am unable to download podcasts from the iTunes store. The old and, it has to be said, reliable "Get Episode" button is nowhere to be seen. Clicking on the subscribe button brings me the warning splash screen, "Are you sure you want to subscribe?" but when I click "Yes" nothing happens.
The new iTunes Store design may be sexy and all that but it lacks the essential element of functionality. Black background, sure. 3-D buttons and windows, bring it on. But best of all... how about it just works?
I produce a podcast and it is very frustrating to think that all our hard work won't get heard because of a technical glitch. Is there a workaround? Or is it possible to go backwards in time to an older (more functional version of iTunes)? It seems like a pretty substantial problem... anyone else?

I've got iTunes 9.0.3. I'm clicking the FREE button (and every other button I can find) on podcast lists but since they changed the design I still can't download a single episode of a podcast.
Any help will be appreciated.
I guess not many people actually download podcasts or there would be a real storm about this - it's so basic, yet it doesn't work and there are almost no posts about it.
Thanks in advance.

ORA-29400: data cartridge error/IMG-00703: unable to read image data error

Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
photo_width integer;
begin
-- Check to see if the new photograph is different from the old one...      --
if dbms_lob.compare(:old.photo, :new.photo) != 0
then
    -- ...if so, check to see if it's wider than the desired 250 pixel        --
    -- maximum...                                                             --
    photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
    if photo_width > 250
    then
      -- ...and if so, apply an image transform that will resize to the photo --
      -- to a maximum of 250 pixels wide, keeping the original aspect ratio. --
      -- There doesn't seem to be an elegant way of specifying a constraint   --
      -- in one dimension like this, so the height is specifed as a large     --
      -- enough value to cover all practical contingencies.                   --
      ordImage.process(:new.photo, 'maxScale=250 10000');
    end if;
end if;
end;Any thoughts/suggestions?

hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], []

Unable to download podcasts on home network thru router on broadband modem

HELP!
In the last month or so, I am unable to download podcasts thru out home network. Have 2 imacs, one connected wirelessly (N) and one ethernet on a Belkin Router connected to a Motorola Broadband Modem (DHCP). When podcasts are refreshed and begin to download, the downloads often stop. My research reveals that the podcast downloads cause all the machines on the network to become disconnected from the router with the exception of a TIVO connection. Thus no internet access across the VPN. The router remains connected to the internet, and if restarted, the network machines are restored. Wondering if I need to configure a Proxy Server for the VPN and for ITunes handshaking? Guidance appreciated.

Updated information: It appears, according to the Belkin Firewall Security Log, that the podcast downloads are being interrupted by the router which lists the event as a DoS Attack from my ISP address registered to the internet service provider (Comcast). Gathering this is based on high udp activity on port 80 (Can you tell I a over my head here?). I know I can configure certain port privileges in the firewall settings, downloaded the apple port sheets somewhere.......

ITunes does not play Podcasts in a row

Hi everybody.
Why is it, that iTunes does not play Podcasts in a row like it does in individual playlists. It stops after each episode of a subscribed Podcast and I have to manually trigger the next one. Even more so, the iPod returns to its main menu after each episode in a Podcast. This is annoying, especially when I am driving or jogging.
Do I have to organize my Podcasts in playlists or is there another trick or tweak?
Thank you!
Michael
PowerBook G4 Mac OS X (10.4.4)

Playlists are a possible workaround, but I just drill into the genre -> Podcast -> "All" -> podcast name to get to a list that plays straight through.

Unable to locate podcasts on nano

I am unable to locate podcasts on my second gen. nano. My itunes library shows the podcasts listed. Any clues?

iMovie would normally be kept in the Applications folder, is that where it was when you did the upgrade?
Also iMovie would have come with your computer. If needed you can reinstall it from the disk that came with the computer.
If you do not have the disk, your easiest alternative may be to purchase it from the Mac app store. To do that you will need to upgrade your operating system to Mac OS X 10.7.4 (Lion) or later, as the version of iMovie on the App store requires that.
Getting Lion from the App store is a little tricky. Unless you have previously purchased it, you need to call Apple sales and buy a download code from them, then go to the store to get it.
If your MacBook will support it, of course, you can always go up to OS X 10.8 (Mountain Lion.)
Best of luck.

Unable to read view Id of Declarative Component from "var" of af:iterator

Hi,
I am facing a weird issue where when i assign "var" of af:iterator to the view Id of declarative component, it is saying "<DynamicIncludeTag> <getViewId> Encountered null from the viewId expression: #{row}"
And Page is showing blank.
My JSPX code is as follows :
<af:iterator value="#{pageFlowScope.stageBean.pathList}" var="row">
<af:outputText value="#{row}" id="ot1"/>
<af:declarativeComponent viewId="#{row}"/>
</af:iterator>
And code snippet for getter in Java bean is as follows:
public List<String> getPathList()
List<String> pathList = new ArrayList<String>();
pathList.add("/Test.jspx");
return pathList;
The weird thing here is output text is printing the path /Test.jspx but declarative component is not recognizing it. Its showing blank page and in logs, error says "Encountered null from the viewId expression: #{row}"
If i remove #{row} from viewId and manually give like viewId = "/Test.jspx" , its displaying the page correctly.
Can anyone please help me solve this issue?
Regards,
Rakesh.

http://stackoverflow.com/questions/12183735/adf-unable-to-read-view-id-of-declarative-component-from-var-of-afiterator

Since I updated to ios 5.1.1 I'm getting " Unable to download podcast" error? Is there any fix for this?

How can I fix unable to download podcast error, even if I retry it gives me the same message with all the podcasts I have in my iPhone. How can I fix this?

Are you seeing the same message with Apple's Podcasts app? More info about the Podcasts app here -> About the Podcasts app for iOS
Is this happening with all podcasts? Maybe the server that hosts that podcast is down or it's having problems, try testing with one of the other top rated podcasts.

HT1725 I have tried to download the podcast "Ab Trimmer" from Exercise Tv and it does not allow the download to be completed. Comes up with Unable to Download podcast prompt. I now just want this to be moved from my download list, how do I do this?

I have tried to download the podcast "Ab Trimmer" from Exercise Tv and it does not allow the download to be completed. Comes up with Unable to Download podcast prompt. I now just want this to be removed from my download list, how do I do this?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

System unable to read table in Adhoc Query

Hi Experts,
I am trying to extract a report based on Infotype 0022 through Adhoc query. Even after maintaining data for IT0022 for a few employees the system is unable to read the educational details of those employees.
I am unable to trace the defect . can anybody please tell me what could be the reason. I have checked the table PA0022, there the data is been stored.
Thanks & Regards,
Smitha

Hi paul and experts
actuall im reading data from 0022 infotype . im using macro
rp_provide_from_last p0022 '11' pn-begda pn-endda.
no data found for this.
but in pa30 for that particular employee data is there.
please help me out of this.
thanks a lot

Unable to read podcast in a row

Similar Messages

Maybe you are looking for