Cisco 5508 external web authentication

Hi all,
Firstly, I do apologise as this question has been posted in another forum, I believe it is the wrong one though hence me posting here.
I am running with a pair of Cisco 5508 controllers with 7.4.121.0 installed. We offer a guest Internet service to our user base and guests. To access the guest service a user must first authenticate via an externally hosted server, I won't go into the specifics but it is a secure service will a valid, signed cert for the login page. The issue I am hitting is that when a user logs into the portal the controller cert is then displayed (2.2.2.2) which returns a cert error. It kind of makes the service look insecure when it isn't. I've read numerous articles about creating CSRs, etc and loading certificates on the controller, but the issue we have is that we use externally hosted DNS servers for the service and they are refusing to create a DNS record. We can't use internally hosted DNS servers as this breaks our security policy. Is there any other way around this or do I just have to have the user accept the cert error?
Thanks

I hear you and I was under the same impression. If I go through the steps I followed maybe it can be explained..
Upgraded the primary controller from 6.0.x to 7.0.x a, APs upgraded. Upgraded FUS to 1.9. Upgraded controller to 7.4.121.0, upgraded APs. APs joined the controller. Disabled WebAuth Secure Web. Followed same steps for secondary controller. Shutdown primary controller to test failover to secondary. APs did not failover. Waited 15 mins, debugged CAPWAP and saw nothing coming in. Brought primary back online, waited 15 mins, debugged CAPWAP and saw nothing coming in. Waited a further 15 mins. Still no APs joining. Enabled WebAuth Secure on the primary, and boom, all the APs joined the primary. Not sure if this was just a coincidence, but this was the behaviour I witnessed. I'm running a pair of 5508's.
I've not witnessed this before, but this is the first time I've disabled this setting. Understand it has nothing to do with APs joining and may just be a coincidence, but this is what I experienced. I ran out of time during the change window so couldn't test this further and try to simulate again, will try again when the next window becomes available.

Similar Messages

Aironet 1140 FLEXCONNECT External Web Authentication and Apple Devices

Hi!
I'm having an issue with this Access Point.
I've configured this access point with WLC in mode FlexConnect with web authentication.
It's all right, i'm connecting with my PC in wireless, i open my web browser in windows, then the Access Point redirect me to External Web Authentication Page,
i put my credentials, and i'm redirected to my access point ( https:/1.1.1.1/login.html i accept the certificate) and then the Access Point redirect me to Internet.
I do this with my android phone, it's all right again.
I try to connect with iphone or ipad , i'm redirected to External Web Authentication Page, i put my credentials, and i'm redirected to https://1.1.1.1/login.html where the web browser don't ask me anything and i'm not redirected to Internet.
Have you any idea?

Thx you Scott, i understand what are you talking about, but my problem is different.
I try to explain..
I see the wireless network, i associate the iphone to this network, so i'm redirected to Login page,
as i use the "Apple Login" or i Open a Web Page .
In this page , that i reach with all devices i put my credentials, then i will be redirected with all devices
back to Access Point (https://1.1.1.1/login.html).
In this page i should be redirected to internet after Radius Authentication, but with Apple Devices this doesn't work.
This is thw WEB AUTHENTICATION from Cisco Documents.
The user associates to the web authentication SSID.
The user opens their browser.
The WLC redirects to the guest portal (such as ISE or NGS) as soon as a URL is entered.
The user authenticates on the portal.
The guest portal redirects back to the WLC with the credentials entered.
The WLC authenticates the guest user via RADIUS.
The WLC redirects back to the original URL.

Repeated wlc 5508 client web authentication

I'm trying to troubleshoot a situation where many of our guest wireless users are repeatedly being prompted to reauthenticate via the web interface. the session timeout is set to 4 hours, however, many times a client is presented with a web authentication screen right in the middle of browsing at random times.
I do have several system log entries, but cannot find the specific entries in the Error code reference for the WLC. For example, I don't find anything on %AAA-3-VALIDATE_GUEST_SESSION_FAILED: file_db.c:4022 Guest user session validation failed for guest1. Index provided is out of range..
I'm running a WLC 5508 with 7.0.98.0 and have read through all of the release notes, error code references, etc., and don't see anything regarding this issue.
The WCS screenshot shows a good example of how often this occurs! Is the client actually re-associating with the AP (which in turn would require a web reauth)? Not sure if I'm barking up the wrong tree - focusing on web auth when I may actually need to be focusing on AP association...
I do have a TAC case opened up, but was wondering if anyone has experienced this before?
Sorry for the rambling...

Rene,
I did several things and at least one of them seemed to resolve the issue:
These notes are directly from my TAC case and I will try to provide a little more information [in brackets].
1.       Upgrade WLC to 7.0.98.218 [self explanatory]
2.       Upgrade WCS to 7.0.172.0 [current version, as of this note]
3.       Increase DHCP scope time on ASA from default (30 minutes) to 4
days [DHCP running external from the WLC]
4.       Remove TKIP from the WLAN - only allow AES [had both configured but tech advised to only use AES]
5.       Increased session timeout from 14400 seconds to 64800 seconds
(4 hours to 18 hours) [don't think this helped resolve the issue, but it certainly was more convenient for our longer-term guests]
I think that the TKIP and/or DHCP setting was integral as part of the resolution. I upgraded the WLC because the version that I was running didn't have the web-auth debug option, so I'm not sure that that actually contributed to the resolution.
Good Luck,
Rob.

External Web authentication server for Guest access

I have a guest wireless wlan setup. When guest users attach to our guest wireless they are prompted by the built in web security on the WLC's.
Cisco talks about how to setup the WLC to route web authentication to an external web server, but they don't say what kind of web server to use or examples.
I need some help on getting an external web server to do web authentication. With the server we would like to get some basic info from the user. name, email, pupose of using wlan, and some background info they don't see like, computer name, mac address. This is all for tracking purposes.
Hotels do this type of web authentication for example.
Any help would be great.

Hi Patrick,
I'm having the same problem here. I configured my WLC that redirect the login page to WEB Server, but I don't know how configure the Web Server to back the credentials to WLC. Did you can solve this problem?
thanks!
Claudio

External Web Authentication - HTTP Redirect or Proxy?

I've been reading all of the information I can find about the use of authentication of guest users using an external web server, rather than the native portal provided by a WLC. I've looked at the configuration examples and configuiration guides.
My question is this: when the WLC redirects the client to the external web server, is it a true http redirect (i.e. a http redirect sent to the client) or does the WLC act as a proxy (via its virtual address - usually 1.1.1.1), altering the http headers as it does when re-directing requests to its internal web portal ?
This is important as I need to understand if it is the client that has to be able to connect to the external web server, or whether it is the WLC that has to be able to connect to the external web server.
The WLC for the solution I am working on is in a highly secure DMZ area, so it is imprtant to know which devices need to talk to which.

So, to be clear, it is the WLC that needs connectivity to the external server or the client device?
Both devices need to communicate to the external web server. The WLC will need to communicate with the external server since it will be expecting a return of information from that server to process the l3 authentication. The client will need to reach it as the WLC is going to redirect it to that site (reason for pre-auth acl).
Does the client communicate directly with the external web server, or will it direct its http requests to 1.1.1.1, which will then be proxied by the WLC to the external web server?
Again this is both; So the client will lookup/resolve a site and initiate some HTTP traffic, so it starts a TCP SYN for to the real web server it is trying to reach, the WLC will see this request; hijack the IP of the destination server and reply back to the client(pretending to be the "internet" server) The WLC redirects the client to it's virtual IP; whether using internal or external web auth. So the client will arrive at the virtual IP of the WLC; which will then redirect the client to the external web server in your case. When this happens the WLC has also inserted some information in to the redirect URL on the clients behalf so which the external server will use to send the information it collects (assuming you're using one of our standard external bundles). The external server will process the client HTTP GET, so as far as "viewing and using" the external web server; the client will make that request directly to the external web server. The external server, upon submittion of the form on the page, will send the information collected from the client back to the WLC server (which it learned it's IP from the redirect URL). The authentication of the client will take place at the WLC.
So in this scenario you need a love triangle between the Client, WLC, and external server. All will be talking to one another at some point. Your client needs connectivity to the external server; and your WLC needs connectivity to the external server.
David W.

Cisco Auto Anchor Web Authentication - NAS IP Address

Hi,
I've setup auto anchor web authentication for my guest network. I want my Web Authentication requests to be authenticated by ISE however need the authenticating device to be the Anchor Controller.
I setup the WLAN to authenticate against ACS4.2 and it works correctly, the NAS IP address is the Anchor controller. When changing the WLAN to auth again my ISE 1.2 server, authentications are sourced from the foreign controller.
Has anyone come across this or know why ISE is seeing the NAS IP Address as the foreign wireless controller?
Thanks,

Hi,
I've setup auto anchor web authentication for my guest network. I want my Web Authentication requests to be authenticated by ISE however need the authenticating device to be the Anchor Controller.
I setup the WLAN to authenticate against ACS4.2 and it works correctly, the NAS IP address is the Anchor controller. When changing the WLAN to auth again my ISE 1.2 server, authentications are sourced from the foreign controller.
Has anyone come across this or know why ISE is seeing the NAS IP Address as the foreign wireless controller?
Thanks,

Cisco Ise Central Web authentication not working

Hello Guys,
CWA is not working. It says that authentication suceeded but posture status is pending. No error in my Monitor--authentication. Checking it in my Windows 7, it does not shows the CWA portal.
What might be the possible problem of this.?
thanks

Kindly review the below links:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml

Cisco ISE Local Web Authentication via Switch

Hello,
I have Cisco ISE 1.2 and I need local webauthentication for clients.
I want to send webauthentication link via switch.
I made a research for it but I meet ACS documents :
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/TrustSec_1-99/WebAuth/WebAuth_Dep_Guide.html#wp393321
and ISE central webauthentication documents for it.
Is there local webauth in ISE via switch?
Thanks,
Alparslan

Hello Alparslan,
Please check the following link,
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/113362-config-web-auth-ise-00.html

WLC (Foreign-Anchor), problem with the external web auth -- ISE

hello guys
I am currently designing a platform for a guest network, which must be isolated from the local network, the following equipment:
ISE 1.2 (Cisco SNS- 3415-K9)
WLC 7.0.230.0 (Cisco controller 5508)---> wlc Foreign
WLC 7.0.230.0 (Cisco controller 5508)---> wlc Anchor.
The EoIP tunnel between wlc is performed successfully.
The wireless client gets IP address of the anchor wlc (DHCP server).
Test 1:
I configure the WLC ANCHOR with local web authentication (internal), the wireless client is authenticated by WLC and navigate successfully.
Test 2:
Configure the WLC to anchor external web authentication (ISE). configure a user in ISE guest portal.
The wireless client gets IP address of the anchor wlc (DHCP server), attempting to navigate not display the guest portal.
Debug a wireless client trying to connect to the guest network is attached.

Thanks for your help Scott...
Now I presents another problem with the guest portal page. The wireless client obtains IP address and managed to reach the guest portal page, then enter the username and password page tells me it was successful. When I try to browse again brings me to the portal visitor page and asks me to enter user name and password.
test 1:
the username and password created for away was verified.
Scoot will have some implementation details with the same scenario I am developing? I think I'm missing some details in the ISE does not allow me to navigate the entrance for visitors to be successful.

Help with Web Authentication

Having a couple of issues with web authentication, and not getting much help from Cisco TAC. Basically, I'm trying to set up different login pages for each WLAN (so far I have two) with a 4402 controller running 5.1.151.
For one WLAN, I'm using the internal (default) login page with the following modifications: Cisco Logo is hidden, custom Headline and custom Message. User authentication is done through RADIUS. This works great, but every time I reboot the controller, my custom Message disappears and I get the generic Cisco message, which I don't want. When I add the custom message, I make sure to click Apply and Save Configuration.. don't know if this is a bug or not, anyone else seeing this?
For the second WLAN, because I need a different login page, I've tried using a customized downloaded login page and also an external web page.
For the external web authentication, the documentation says you don't need a pre-authentication ACL and yet without this, the redirect doesn't work. Does anyone have this working without an ACL? Also, the sample login page provided by Cisco does not work and I have no clue what code is needed for the username and password credentials to be passed on to WLC for RADIUS authentication.
As for the customized downloaded login page, I've gotten a sample page from Cisco which they've said they do not support and this page has several issues which I can't seem to get around: it redirects users to the generic welcome page (which we don't want), and does not prompt the user when they enter incorrect credentials (though I can tell the code for this is there).
So, I'm wondering if anyone has either an external or internal login page that is working properly and is willing to point me in the right direction?
Thanks.

We have had some similar issues with the controllers not telling user they have used the right username/password, but have solved it. Whether it will help or not we can let you have a copy of our login.tar file if you want, just stick your email address in a reply.
As far as I know, there is only one place to enter a re-direct page, which is in the config for the default web auth page and all web auth methods use this re-direct...that is our experience at least.

Redirect to web authentication not working on Cisco 5508 Wireless Controller

Hi,
I have a wlan with web authentication:
http://i55.tinypic.com/w145zk.png
and
http://i51.tinypic.com/344sfm0.png
When I connect to the SSID (I get correct IP from the Cisco 5508 Controller) and try to surf, I do not get redirected to the web authentication page (https://1.1.1.1/login.html), when I manually insert the URL I get "cannot display the webpage". Any idea?
The virtual interface is 1.1.1.1.
Here is a screenshot of interface and internal dhcp:
http://i52.tinypic.com/2vkm1d2.png
Any idea why clients are not redirecting?
Thanks!

Thanks for the reply dmantil!
When I changed the Virtual DNS name to 1.1.1.1 (the same as the IP) I get redirected if I use http://198.133.219.25, but not with http://cisco.com, I get redirected only if I use IP.
I forgot to mention that the controller is in a lab with no access to DNS server. Does the controller check if the domain is valid before redirecting users? I cant find any documentation on how the controller redirect users.

Cisco Wireless AP 2602 - Web Authentication/Pass NOT working?

Product/Model                                       Number:
AIR-CAP2602E-A-K9
Top                                       Assembly Serial Number:
System                                       Software Filename:
ap3g2-k9w7-xx.152-4.JB3a
System                                       Software Version:
15.2(4)JB3a
Bootloader                                       Version:
BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
When "Web Authentication/Pass" option checked, it is totally unaccessible to internal or external network, any clue/advice?
Thanks in advance.

Thanks, seems I missed the RADIUS part; after I done that it's still no luck, here are some tech support info, are you able to help?
------------------ show version ------------------
Cisco IOS Software, C2600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
ROM: Bootstrap program is C2600 boot loader
BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
WuGa-CiscoAP uptime is 3 days, 19 minutes
System returned to ROM by power-on
System restarted at 23:18:39 +0800 Mon Feb 10 2014
System image file is "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-SAP2602E-A-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory.
Processor board ID FGL1650Z5X3
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: E0:2F:6D:A3:4D:0B
Part Number                          : 73-14511-02
PCA Assembly Number                  : 800-37898-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC164889AN
Top Assembly Part Number             : 800-38357-01
Top Assembly Serial Number           : FGL1650Z5X3
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP2602E-A-K9
Configuration register is 0xF
------------------ show running-config ------------------
Building configuration...
Current configuration : 5276 bytes
! Last configuration change at 23:36:14 +0800 Thu Feb 13 2014
! NVRAM config last updated at 23:36:14 +0800 Thu Feb 13 2014
! NVRAM config last updated at 23:36:14 +0800 Thu Feb 13 2014
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname WuGa-CiscoAP
logging rate-limit console 9
enable secret 5
aaa new-model
aaa group server tacacs+ tac_admin
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login webauth group radius
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login web_list group radius
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone +0800 8 0
no ip cef
ip admission name webpass consent
ip admission name webauth proxy http
ip admission name webauth method-list authentication web_list
ip admission name web_auth proxy http
ip admission name web_auth method-list authentication web_list
ip admission name web-auth proxy http
ip admission name web-auth method-list authentication web_list
ip name-server 8.8.8.8
dot11 syslog
dot11 vlan-name GuestVLAN vlan 2
dot11 vlan-name InternalVLAN vlan 1
dot11 ssid Guest
   vlan 2
   web-auth
   authentication open
   mbssid guest-mode
dot11 ssid WuGa-6
   vlan 1
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 0211115C0A555C721F1D5A4A5644
dot11 ssid WuGa-60
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 03084C070900721F1D5A4A56444158
dot11 guest
username wuga lifetime 360 password 7 030D5704100A36594908
username Cisco privilege 15 password 7
bridge irb
interface Dot11Radio0
no ip address
encryption mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
ssid Guest
ssid WuGa-6
antenna gain 2
stbc
mbssid
speed basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15. m16. m17. m18. m19. m20. m21. m22. m23.
channel 2452
station-role root
dot11 dot11r pre-authentication over-air
dot11 dot11r reassociation-time value 500
ip admission web-auth
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.2
encapsulation dot1Q 2
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
ip admission webauth
interface Dot11Radio1
no ip address
encryption mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
ssid WuGa-60
antenna gain 4
peakdetect
no dfs band block
stbc
speed basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15. m16. m17. m18. m19. m20. m21. m22. m23.
power local 5
channel width 40-above
channel dfs
station-role root
dot11 dot11r pre-authentication over-air
dot11 dot11r reassociation-time value 500
interface Dot11Radio1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface GigabitEthernet0
no ip address
duplex auto
speed 1000
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.2
encapsulation dot1Q 2
bridge-group 2
bridge-group 2 spanning-disabled
no bridge-group 2 source-learning
interface BVI1
ip address 192.168.133.213 255.255.255.0
ip default-gateway 192.168.133.200
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip route 0.0.0.0 0.0.0.0 192.168.133.200
ip radius source-interface BVI1
ip access-list extended ALL
permit ip any host 0.0.0.0
permit ip any any
permit ip 0.0.0.0 255.255.255.0 any
ip access-list extended All
permit tcp any any established
permit tcp any any eq www
permit ip any any
radius-server local
nas 192.168.133.213 key 7 070C285F4D06
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
radius server 192.168.10.2
address ipv4 192.168.10.2 auth-port 1812 acct-port 1646
radius server local
address ipv4 192.168.133.213 auth-port 1812 acct-port 1813
key 7
bridge 1 route ip
line con 0
terminal-type teletype
line vty 0 4
terminal-type teletype
transport input all
sntp server 128.138.141.172
sntp broadcast client
end

SNMP web authenticated users wlc 5508

Hello everyone,
I am using web authentication with my Wlc 5508 and I would like to check all users currently connected (ip, login used, MAC address, ...) with SNMP.
I am using an external web server and my client are authenticated with ldap.
I know I can receive these information with traps, but I would like to create a short program which will check all users when I click on a button.
Can anyone help me ?
Thanks a lot for your answers.

Hello Julien,
Thank you for the info. +5 for solving your own problem.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

Invoking an external web service through a JCD with Basic Authentication

Group,
I am trying to invoke an external web service (written in ASP.Net) from a jcd (5.1.2). The web service is guarded by Basic Authentication. I have entered the crudentials into the External Web service environment component and deployed the project. I receive the following error from the .invoke() method:
request requires HTTP authentication: Unauthorized
I have tried the same request through SoapUI using the same crudentials and get back the response correctly. Has anyone tried invoking an external web service with basic authentication through a jcd in 5.1.2 before?
One other item of note. I have another jcd calling a different external web service deployed on the same domain. I hope that this isn't interfering with the execution of this service as it doesn't require any crudentials to execute.

Hey Chris.
I am just starting to write a jcd that calls an external web service but cannot find any sample code nor instructions on how to do it in the supplied documentation. Could you send me a code sample from your one?
Cheers
Matt

Issue with calling external web service with authentication details ...

Hi,
     I am facing a deployment issue with Oracle ESB. I am trying to call an external Web Service with authentication from ESB SOAP Service. It is working fine with my local ESB version 10.1.3.3.0 Build PCBPEL_10.1.3.3.0_GENERIC_070615.0525; however it is getting an error at our development ESB version 10.1.3.3.1 Build PCBPEL_10.1.3.3.1_GENERIC_RELEASE.
     I am getting following error.
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception during SOAP invoke: Server was unable to process request. ---> Object reference not set to an instance of an object.; nested exception is: javax.xml.rpc.soap.SOAPFaultException: Server was unable to process request. ---> Object reference not set to an instance of an object. at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.populateFaultMessage(WSIFOperation_JaxRpc.java:3086) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1728) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1196) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:867) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:770) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:790) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1424) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:307) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispat
     Could one of you please help me out to understand why it is happining.
Thanks in advance.
Jyotirmoy.

Hi Mahesh,
One you are missing is authentication token or credentials.
Please refer to the following articles.
http://www.cleverworkarounds.com/2014/02/05/tips-for-using-spd-workflows-to-talk-to-3rd-party-web-services/
A Series of articles related to Web Service in SPD Workflow
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 1
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 2
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 3
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 4
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 5
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 6
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 7
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 8
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 9
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 10
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 11
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 12
Please don't forget to mark it answered, if your problem resolved or helpful

Cisco 5508 external web authentication

Similar Messages

Maybe you are looking for