Unable to remount the global file system

Hello All,
I am facing problem when i am remounting the global file system on one of the nodes in cluster.
Here are my system details:
OS: SunOS sf44buce02 5.10 Generic_141414-01 sun4u sparc SUNW,Sun-Fire-V440
SunCluster Version:3.2
The problem details:
The following entry i have in my /etc/vfstab file
dev/md/cfsdg/dsk/d10 /dev/md/cfsdg/rdsk/d10 /global/TspFt ufs 2 yes global,logging
and now i wanted to add "nosuid" option to the global file system. I have used the following command to add but i couldn't succeed.
# mount -o nosuid,remount /global/TspFt i am getting the following error
mount: Operation not supported
mount: Cannot mount /dev/md/cfsdg/dsk/d10
can anyone tell me How to remount the global file system without reboot?
Thanks in advance.
Regards,
Rajeshwar

Hi,
Thank you very much for the reply. Please see the below details that you have asked:
-> The volume manager i am using is *"SUN"*.
-> In my previous post i missed "*/*" while pasting the vfstab entry. Please have a look at the below vfstab entry.
*/dev/md/cfsdg/dsk/d10 /dev/md/cfsdg/rdsk/d10 /global/TspFt ufs 2 yes global,logging,nosuid,noxattr*
- Output of ls -al /dev/md/
root@sf44buce02> ls -al /dev/md/
total 34
drwxr-xr-x 4 root root 512 Jun 24 16:37 .
drwxr-xr-x 21 root sys 7168 Jun 24 16:38 ..
lrwxrwxrwx 1 root root 31 Jun 3 20:19 admin -> ../../devices/pseudo/md@0:admin
lrwxrwxrwx 1 root root 8 Jun 24 16:37 arch1dg -> shared/2
lrwxrwxrwx 1 root other 8 Jun 3 22:26 arch2dg -> shared/4
lrwxrwxrwx 1 root root 8 Jun 24 16:37 cfsdg -> shared/1
drwxr-xr-x 2 root root 1024 Jun 3 22:41 dsk
lrwxrwxrwx 1 root other 8 Jun 3 22:27 oradg -> shared/5
drwxr-xr-x 2 root root 1024 Jun 3 22:41 rdsk
lrwxrwxrwx 1 root root 8 Jun 24 16:37 redodg -> shared/3
lrwxrwxrwx 1 root root 42 Jun 3 22:02 shared -> ../../global/.devices/node@2/dev/md/shared
- output of ls -al /dev/md/cfsdg/
root@sf44buce02> ls -al /dev/md/cfsdg/
total 8
drwxr-xr-x 4 root root 512 Jun 3 22:29 .
drwxrwxr-x 7 root root 512 Jun 3 22:29 ..
drwxr-xr-x 2 root root 512 Jun 24 16:37 dsk
drwxr-xr-x 2 root root 512 Jun 24 16:37 rdsk
- output of ls -la /dev/md/cfsdg/dsk/.
root@sf44buce02> ls -al /dev/md/cfsdg/dsk
total 16
drwxr-xr-x 2 root root 512 Jun 24 16:37 .
drwxr-xr-x 4 root root 512 Jun 3 22:29 ..
lrwxrwxrwx 1 root root 42 Jun 24 16:37 d0 -> ../../../../../devices/pseudo/md@0:1,0,blk
lrwxrwxrwx 1 root root 42 Jun 24 16:37 d1 -> ../../../../../devices/pseudo/md@0:1,1,blk
lrwxrwxrwx 1 root root 43 Jun 24 16:37 d10 -> ../../../../../devices/pseudo/md@0:1,10,blk
lrwxrwxrwx 1 root root 43 Jun 24 16:37 d11 -> ../../../../../devices/pseudo/md@0:1,11,blk
lrwxrwxrwx 1 root root 42 Jun 24 16:37 d2 -> ../../../../../devices/pseudo/md@0:1,2,blk
lrwxrwxrwx 1 root root 43 Jun 24 16:37 d20 -> ../../../../../devices/pseudo/md@0:1,20,blk

Similar Messages

Zerofree: Shrinking ARCH guest VMDK--'remount the root file-system'?

Hi!
[using ZEROFREE]
Getting great results with and extra ARCH install running as a VMDK in Workstation.
REALLY need tips on shrinking the VMDK. obviously have deleted unneeded files
and now rather urgently need to learn what's eluding me so far.
1) zerofree is install IN the virtual machine (VMDK)workstation running on windows 8.
2) Here's the instructions for zerofree:
filesystem has to be unmounted or mounted read-only for zerofree to
work. It will exit with an error message if the filesystem is mounted
writable.
To remount the root file-system readonly, you can first
switch to single user runlevel (telinit 1) then use mount -o remount,ro
filesystem.
As it a VMDK and it's running would the only/best option be to: "remount the root file-system readonly" ??
OR, could i add the VMDK to another running arch system that I do have and NOT mount the VMachine thereby
allowing zero free to run even better on that?
Are both method JUST as efficive at shrinking? My guess would be the remount root file-system as read only
would NOT be as efficient at shrinking.
I could really use a brief walk-through on this as all attempts have failed so far.
I boot the ARCH virtual machine and do what may I ask?
Last edited by tweed (2012-06-05 07:43:41)

How did you use/test unison? In my case, unison, of course, is used in the cpio image, where there are no cache files, because unison has not been run yet in the initcpio image, before it had a chance to be used during boot time, to generate them; and during start up is when it is used; when it creates the archives. ...a circular dependency. Yet, files changed by the user would still need to be traversed to detect changes. So, I think that even providing pre-made cache files would not guarantee that they would be valid at start up, for all configurations of installation. -- I think, though, that these cache files could be copied/saved from the initcpio image to the root (disk and RAM), after they have been created, and used next time by copying them in the initcpio image during each start up. I think $HOME would need to be set.
Unison was not using any cache previously anyway. I was aware of that, but I wanted to prove it by deleting any cache files remaining.
Unison, actually, was slower (4 minutes) the first time it ran in the VM, compared to the physical hardware (3:10s). I have not measured the time for its subsequent runs, but It seemed that it was faster after the first run. The VM was hosted on a newer machine than what I have used so far: the VM host has an i3-3227U at 1.9 GHz CPU with 2 cores/4 threads and 8 GB of RAM (4 GB ware dedicated to the VM); my hardware has a Pentium B940 at 2 GHz CPU with 2 cores/2 threads and 4 GB of RAM.
I could see that, in the VM, rsync and cp were copying faster than on my hardware; they were scrolling quicker.
Grub, initially complains that there is no image, and shows a "Press any key to continue" message; if you continue, the kernel panics.
I'll try using "poll_device()". What arguments does it need? More than just the device; also the number of seconds to wait?
Last edited by AGT (2014-05-20 16:49:35)

Problems mounting global file system

Hello all.
I have setup a Cluster using two Ultra10 machines called medusa & ultra10 (not very original I know) using Sun Cluster 3.1 with a Cluster patch bundle installed.
When one of the Ultra10 machines boots it complains about being unable to mount the global file system and for some reason tries to mount the node@1 file system when it is actually node 2.
on booting I receive the message on the macine ultra10
Type control-d to proceed with normal startup,
(or give root password for system maintenance): resuming boot
If I use control D to continue then the following happens:
ultra10:
ultra10:/ $ cat /etc/cluster/nodeid
2
ultra10:/ $ grep global /etc/vfstab
/dev/md/dsk/d32 /dev/md/rdsk/d32 /global/.devices/node@2 ufs 2 no global
ultra10:/ $ df -k | grep global
/dev/md/dsk/d32 493527 4803 439372 2% /global/.devices/node@1
medusa:
medusa:/ $ cat /etc/cluster/nodeid
1
medusa:/ $ grep global /etc/vfstab
/dev/md/dsk/d32 /dev/md/rdsk/d32 /global/.devices/node@1 ufs 2 no global
medusa:/ $ df -k | grep global
/dev/md/dsk/d32 493527 4803 439372 2% /global/.devices/node@1
Does anyone have any idea why the machine called ultra10 of node ID 2 is trying to mount the node ID 1 global file system when the correct entry is within the /etc/vfstab file?
Many thanks for any assistance.

Hmm, so for arguments sake, if I tried to mount both /dev/md/dsk/d50 devices to the same point in the filesystem for both nodes, it would mount OK?
I assumed the problem was because the device being used has the same name, and was confusing the Solaris OS when both nodes tried to mount it. Maybe some examples will help...
My cluster consists of two nodes, Helene and Dione. There is fibre-attached storage used for quorum, and website content. The output from scdidadm -L is:
1 helene:/dev/rdsk/c0t0d0 /dev/did/rdsk/d1
2 helene:/dev/rdsk/c0t1d0 /dev/did/rdsk/d2
3 helene:/dev/rdsk/c4t50002AC0001202D9d0 /dev/did/rdsk/d3
3 dione:/dev/rdsk/c4t50002AC0001202D9d0 /dev/did/rdsk/d3
4 dione:/dev/rdsk/c0t0d0 /dev/did/rdsk/d4
5 dione:/dev/rdsk/c0t1d0 /dev/did/rdsk/d5
This allows me to have identical entries in both host's /etc/vfstab files. There are also shared devices under /dev/global that can be accessed by both nodes. But the RAID devices are not referenced by anything from these directories (i.e. there's no /dev/global/md/dsk/50). I just thought it would make sense to have the option of global meta devices, but maybe that's just me!
Thanks again Tim! :D
Pete

Sun Cluster 3.2 - Global File Systems

Sun Cluster has a Global Filesystem (GFS) that supports read-only access throughout the cluster. However, only one node has write access.
In Linux a GFS filesystem allows it to be mounted by multiple nodes for simultaneous READ/WRITE access. Shouldn't this be the same for Solaris as well..
From the documentation that I have read,
"The global file system works on the same principle as the global device feature. That is, only one node at a time is the primary and actually communicates with the underlying file system. All other nodes use normal file semantics but actually communicate with the primary node over the same cluster transport. The primary node for the file system is always the same as the primary node for the device on which it is built"
The GFS is also known as Cluster File System or Proxy File system.
Our client believes that they can have their application "scaled" and all nodes in the cluster can have the ability to write to the globally mounted file system. My belief was, the only way this can occur is when the application has failed over and then the "write" would occur from the "primary" node whom is mastering the application at that time. Any input will be greatly appreciated or clarification needed. Thanks in advance.
Ryan

Thank you very much, this helped :)
And how seamless is remounting of the block device LUN if one server dies?
Should some clustered services (FS clients such as app servers) be restarted
in case when the master node changes due to failover? Or is it truly seamless
as in a bit of latency added for duration of mounting the block device on another
node, with no fatal interruptions sent to the clients?
And, is it true that this solution is gratis, i.e. may legally be used for free
unless the customer wants support from Sun (authorized partners)? ;)
//Jim
Edited by: JimKlimov on Aug 19, 2009 4:16 PM

Installing TREX global file system standalone

I am installing TREX 7.1.23 as a distributed system with central storage (SAN). However, according to multiple SAP documents, 7.1 does not yet allow you to install the global file system in a separate manner than the TREX system installation. Refer to TREX 7.1 central note 1003900 [https://service.sap.com/sap/support/notes/1003900].
SAP does indicate there is an interim solution with note 1258694 "TREX 7.1:Install TREX with Global File System (Windows). " [https://service.sap.com/sap/support/notes/1258694].
In this note it says to execute "install. cmd --action=install_cfs --target=<UNC path_to_NAS> --sid=<SAPSID>", but I have downloaded the standalone TREX 7.1 installation and there is no "install.cmd" file to be found!?
Has anyone seen this note and know how this is done or where this file can be found?
thanks!
John

will be redesigning this installation, so closing thread

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

Unable to open the downloaded file

Unable to open the downloaded file:
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
Error message -
Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
Tried many a times and used various unzipping tool.

do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.

Elements 7 on windows 7, have downloaded a new version on raw for my new camera eos50d still unable to read the raw files help

Hi
Hope someone can help me with this one, have a new computer with windows 7 as the operating system, have installed elements 7 and have now purchased the 50d, as i shoot in raw have tried to open the file but elements is unable to read the raw file, have looked on various threads and have downloaded the new version of raw, this version is saved in my download file directory, have copied across these files to the elements folder but i still cannot read my raw file for the 50d, is there something i have missed.
collisa

please have a look at the folllowing link about the isntallation of the camera raw plugin.
http://kb2.adobe.com/cps/407/kb407344.html
be sure not to have the older version of camera raw plugin in the same folder as that of new one. dont even rename it. Remove it and store it in some other location in case you need to revert back the changes. The camera raw plugin is called : Camera Raw
thanks

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Opatch error 'Unable to parse the xml file'

Hi there,
I am new to installing patches on Oarcle and I need to install patch 12375678 on my windows system, Oracle 11.2.0.2.
I have followed the instructions in the readme.txt file, but got this error and I have not come across anywhere on the web that explain how I could fix it.
Could you please advise?
Thanks
C:\>set oracle_home=C:\oracle\product\11.2.0\dbhome_1
C:\>echo %oracle_home%
C:\oracle\product\11.2.0\dbhome_1
C:\>cd C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678
C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678>opatch apply
Invoking OPatch 11.2.0.1.1
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : C:\oracle\product\11.2.0\dbhome_1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.2.0.1.1
OUI version : 11.2.0.2.0
OUI location : C:\oracle\product\11.2.0\dbhome_1\oui
Log file location : C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch2
012-05-21_15-28-52PM.log
Patch history file: C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch_
history.txt
ApplySession applying interim patch '12375678' to OH 'C:\oracle\product\11.2.0\d
bhome_1'
Running prerequisite checks...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '12375678' for restore. This might take a
while...
Backing up files affected by the patch '12375678' for rollback. This might take
a while...
Patching component oracle.rdbms, 11.2.0.2.0...
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\xml\xsl\kuexttbl.xsl"
Patching component oracle.rdbms.dbscripts, 11.2.0.2.0...
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpd.plb"
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpw.plb"
ApplySession adding interim patch '12375678' to inventory
Interim Patch metadata parsing failure... 'Unable to parse the xml file.'
ApplySession failed: ApplySession failed in system modification phase... 'Unable
to create patchObject'
OPatch will attempt to restore the system...
Restoring the Oracle Home...
OPatch was able to restore your system. Look at log file and timestamp of each f
ile to make sure your system is in the state prior to applying the patch.
OPatch failed with error code = 73

your actions.xml must not be able to be read.
open it in notepad yourself to see does it open, if so its not corrupt, if doesnt open download patch again.
More then likely will be fine so try locate the patch in a shorter home path, like c:\patches\12375678 and see does it install from there.
Only other thing I can think of is the main inventory.xml, usually c:\program files\oracle\inventory\inventory.xml
try notepad with that too.

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

How to get access to the local file system when running with Web Start

I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.

Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).

How do I replace bookmark bar that was lost when a new Mozilla Fox Start page suddenly appeared with a Zone Alarm Community Toolbar, and nothing I have so far tried, working with "Show all Bookmarks", works ("Unable to process the backup file).

My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
I'm out of ideas. Is there something else to try?

Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33

"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz

Unable to remount the global file system

Similar Messages

Maybe you are looking for