Unable to route the data from an AQ in AQ11g to an AQ in AQ10g via router
Hi,
I have configured a router to route the data from an AQ in AQ11g DB to an AQ in AQ10g DB with IP Message Type.
Data of JMS OBJ Message type is getting routed between the queues of same DB.
But its giving error while trying to route the IP Message type data or JMS OBJ Message type data from an AQ in AQ11g DB to an AQ in AQ10g.
aqtrace logs have been configured and I could not see any exception logs in that.
Please see the AQ log below:
The router encountered errors in processing job: <router job name>: oracle.j2ee.jmsrouter.RouterException: The router encountered errors in processing job: <router job name>
I have done the following:
1) Created a new instance and have configured the router
2) Deployed the Standalone Resource Adpater for 10g and 11g
3) Source and Target connection factories configured in the router is the same
Please let me know the following:
1) Is it possible to route an IP Message Type data from AQ11g to AQ10g
2) Is it possible to route an JMS OBJ Message Type data from AQ11g to AQ10g
Thanks and Regards,
Lydia
HI All
Thanks for the prompt response. I got solution for my question. Please check below thread. For quick reponse i posted my question in one more category. Thanks to all of you.
How to read internal table w.r.t. fieldnames stored in other table
Similar Messages
-
Unable to access the data from Data Management Gateway: Query timeout expired
Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
RichaNever mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks. -
Unable to load the data from PSA to INFOCUBE
Hi BI Experts, good afternoon.
I am loading 3 years data( Full load ) from R/3 to Infocube.
So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
SID 60,758 is smaller than the compress SID of cube ZIC_C03; no request booking.
Please give me the solution how to solve this problem.
Thanks & Regards
AnjaliHi Teja,
Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
Anjali -
Unable to get the data from the stored procedure
Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date date;
v_end_date date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id stage_bill.batch_id%TYPE;
v_beginning_service_date stage_bill.beginning_service_date%TYPE;
v_bill_id stage_bill.bill_id%TYPE;
v_bill_method stage_bill.bill_method%TYPE;
v_bill_number stage_bill.bill_number%TYPE;
v_bill_received_date stage_bill.bill_received_date%TYPE;
v_bill_status stage_bill.bill_status%TYPE;
v_bill_type stage_bill.bill_type%TYPE;
v_change_oltp_by stage_bill.change_oltp_by%TYPE;
v_change_oltp_date stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code stage_bill.client_datafeed_code%TYPE;
v_client_id stage_bill.client_id%TYPE;
v_created_date stage_bill.created_date%TYPE;
v_date_of_incident stage_bill.date_of_incident%TYPE;
v_date_paid stage_bill.date_paid%TYPE;
v_deleted_oltp_by stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill stage_bill.duplicate_bill%TYPE;
v_ending_service_date stage_bill.ending_service_date%TYPE;
v_event_case_id stage_bill.event_case_id%TYPE;
v_event_id stage_bill.event_id%TYPE;
v_from_oltp_by stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status stage_bill.oltp_bill_status%TYPE;
v_review_status stage_bill.review_status%TYPE;
v_schema_name varchar(50);
v_Load_date date;
v_Load_user varchar(50);
v_Row_Effective_Date date;
v_Row_End_Date date;
Begin
if p_data_load_date is null then
select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
LOOP -- cursor c_get_data loop begin
FETCH c_get_data
INTO
v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
V_Row_Effective_Date,
v_Row_End_Date;
EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
END LOOP;
CLOSE c_get_data;Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date DATE;
v_end_date DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
NVL (p_data_load_date, SYSDATE) - 1
INTO v_start_date,
v_end_date
FROM DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING (SELECT *
FROM stage_bill
WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
INSERT (batch_id,
beginning_service_date,
bill_id,
bill_method,
bill_number,
bill_received_date,
bill_status,
bill_type,
change_oltp_by,
change_oltp_date,
client_datafeed_code,
client_id,
created_date,
date_of_incident,
date_paid,
deleted_oltp_by,
deleted_oltp_date,
duplicate_bill,
ending_service_date,
event_case_id,
event_id,
from_oltp_by,
oltp_bill_status,
review_status,
schema_name,
load_date,
load_user,
row_effective_date,
row_end_date
VALUES (a.batch_id,
a.beginning_service_date,
a.bill_id,
a.bill_method,
a.bill_number,
a.bill_received_date,
a.bill_status,
a.bill_type,
a.change_oltp_by,
a.change_oltp_date,
a.client_datafeed_code,
a.client_id,
a.created_date,
a.date_of_incident,
a.date_paid,
a.deleted_oltp_by,
a.deleted_oltp_date,
a.duplicate_bill,
a.ending_service_date,
a.event_case_id,
a.event_id,
a.from_oltp_by,
a.oltp_bill_status,
a.review_status,
'HRI',
SYSDATE,
'ETLPROCESS001',
v_start_date,
NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter -
Unable to extract the data from ECC 6.0 to PSA
Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanksECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks -
Unable to get the data from ms sql stored procedures using crystal report 10
Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected]Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected] -
Standard Proxy enhanced unable to fill the data from xml to the structure
Hi All,
We have enhanced a standard proxy structure in PI, generated the proxy in the target system SCM, but the call transformation is not filling the data from xml into the appended field.
Am i have to do any thing to fill the data.
Thanks.
Chaitanya NaruHi Srikant,
You can use the following code. This works for me.
Remember to set the multiplicity of the User structure to 0...N or 1...N
IGPStructure inputStructure = m_context.getInputStructure();
Collection inputItems = inputStructure.getStructures("User");
if(inputItems == null){
return;
for (Iterator iter = inputItems.iterator(); iter.hasNext();) {
//get input item structure and fill context
IGPStructure item = (IGPStructure) iter.next();
String attrName=
item.getAttributeAsString("AttrName");
Thanks & Regards,
Dipankar -
Hi all,
Help me here when i try am unable to get a data,Can some one help me with a query to get.
If it cant be done can i know why..
select * from Sys.databases
where owner_sid='0x01'
What am trying is to get a login
names from syslogin
table with respect to Sid.
Select a.name,b.name,a.owner_sid from Sys.databases a
Join Syslogins b
on a.owner_sid = b.sid
where owner_sid like '0x01'
Thanks all in Advance.....Below are a couple of examples of how to accomplish the task. Note that SID is varbinary so the literal should not be enclosed in quotes.
SELECT
a.name AS DatabaseName
,b.name AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
JOIN sys.server_principals b ON
a.owner_sid = b.sid
WHERE owner_sid = 0x01;
SELECT
a.name AS DatabaseName
,SUSER_SNAME(owner_sid) AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
WHERE a.owner_sid = 0x01;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
Hi Team,
I am learning on webbrowser control and during the learning phase i have the following issue:-
My webbrowser [mywb in this case] is successfully navigating and displaying the website content in webbrowser control. However; that site has three textboxes with dynamically allocated text from asp script
code behind; I have tried to display these textboxes values by providing the correct id of these textboxes in my visual studio 2013 code; but I am not receiving any data except null. Can you help me on this as early as possible.
asp code written to dynamically assign the data to textbox:-
<%
myvar=Request.form("some")
Response.write("<input type=text id=num1 value=" + myvar+ ">")
%>
The code written in VS 2013 to access the textbox by its id when the DocumentCompleted event is triggered:-
string mystr ="";
mystr = myWb.Document.GetElementById("num1").InnerText;
MessageBox.Show(mystr);
Thank You in Advance.
Regards, Subhash KonduruHello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because the issue is related to website, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Unable to get the data from table controller
Dear All,
I am facing the following problem in BSP tableview,
I am having tableview on page as below
<htmlb:tableView id = "reportsTable2"
headerVisible = "true"
headerText = "Pending PANs:"
footerVisible = "true"
design = "standard"
visibleRowCount = "20"
width = "100%"
fillUpEmptyRows = "false"
columnWrapping = "false"
columnWidth = "200"
sort = "server"
keyColumn = "panid"
onRowSelection = "alternate()"
selectionMode = "SingleSelect"
iterator = "<%= tv_itr %>"
table = "<%=IT_DATE_RANGE_PAN %>" >
</htmlb:tableView>
I want collect the table view data in DO_REQUEST method, when i press the sort option on any column in table.
i used the code in DO_request,
if lv_button_id NE '0'.
tv ?= cl_htmlb_manager=>get_data(
request = runtime->server->request
name = 'tableview'
id = 'reportsTable2' ).
tv_data = tv->data .
but , I found no table content in tv_table.
even i tried with export, import .. normally we will dod in ABAP. not wotking.
export IT_DATE_RANGE_PAN2 from IT_DATE_RANGE_PAN to memory id memid1.
import IT_DATE_RANGE_PAN2 to IT_DATE_RANGE_PAN from memory id memid1.
Can any body help me to solve the above issue.
Regards,
KishanHi,
Refer your earlier forum...
how to collet data from tableview in MVC
Thnx
suriya -
Unable to update the Data from Cube to Data Mart
Hi,
I have a problem with the data loading to a Cube(data Mart)in BW. When i checked in RSA3 it is showing 0 records.The data flow is depicted as follows: R/3 -> ODS(BW)-> cube(BW) -> Cube(BW- Data mart for APO cube)-> APO System. In BW, for the final Data target whenever data is loaded, by deleting the previous request through full load. But on checking this final cube (Data Mart to APO) records are avilable, wherein while checking in RSA3 for this final data target(Data Mart to APO)it is showing 0 records.
Why? please help me.
Regards,
krishnaHi,
I checked the data mart in RSA3.It is not a matter of Full upload or delta upload.
thanks
Krishna -
Not able to Delete the data from Memory card
Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery.... -
Unable to load the data into Cube Using DTP in the quality system
Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
SatyaprasadHi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad -
I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.
Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself. -
UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION
Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn .
Maybe you are looking for
-
Using TWO iTunes at the same time on different monitors on Mac Pro:
Here is what I want to do: I want to use a Mac Pro with two displays to play videos from iTunes in full screen mode on the second display while simultaneously playing music not associated with the videos on the main display. Is this possible or do I
-
Images look darker outside of photoshop?
I got a new computer last month long ago and installed cs4. Everything works fine, everything looks fine. But then if I save my image to a jpg and view it outside of Photoshop, it looks so dark! I re-open that same file back into Photoshop and it loo
-
Closed captioning timeline in captivate 7
Within the closed captioning environment, can you change the timeline to read minutes and seconds, instead of just seconds. Now that I am asking this question, why does the timeline mimic Flash instead of Premiere or After Effects. It would seem more
-
Hi, I find location-specific search results useless and often annoying. Previous versions of Firefox included clearly marked and obvious instructions for changing the default geographic location. I don't see that anymore. I don't find any geo-locater
-
PS files automatically embed in Illustrator CS2
I used to be able to bring in a Photoshop file and embed it when I was finished changing it. Don't know what I have done, but it comes in embedded, so can't go back to original. Is there a fix so it goes back to the way it was?