Unable to update the Data from Cube to Data Mart
Hi,
I have a problem with the data loading to a Cube(data Mart)in BW. When i checked in RSA3 it is showing 0 records.The data flow is depicted as follows: R/3 -> ODS(BW)-> cube(BW) -> Cube(BW- Data mart for APO cube)-> APO System. In BW, for the final Data target whenever data is loaded, by deleting the previous request through full load. But on checking this final cube (Data Mart to APO) records are avilable, wherein while checking in RSA3 for this final data target(Data Mart to APO)it is showing 0 records.
Why? please help me.
Regards,
krishna
Hi,
I checked the data mart in RSA3.It is not a matter of Full upload or delta upload.
thanks
Krishna
Similar Messages
-
Unable to update the values from store procedure
hi ,
I have simple table with 3 columns. id, name , sal. am updating the salary based on names.
alter PROCEDURE p1(@names varchar(100))
AS
BEGIN
declare @empData varchar(200)
set @empData= '''' + replace(@names,',',''',''')+''''
print @empData
update tmp set sal =10 where name in ( @empData )
END
GO
if I execute same query (update tmp set sal =10 where name in ( @empData )) outside with printed @empData data it is working fine.
why the same is not working with SP ?
any ideas...You need to split the list into a temporary table or table valued variable:
alter PROCEDURE p1(@names varchar(100))
AS
BEGIN
declare @empTable table ([name] varchar(100));
declare @p int = 1;
declare @len int = len(@names);
declare @nextP int = charindex(',', @name, @p) ;
set @nextP = case when @nextP = 0 then @len else @nextP end;
while @p < @len
begin
insert into @empTable
values (substring(@names, @p, @nextP-1));
set @p = @nextP + 1;
Set @nextP int = charindex(',', @name, @p) ;
set @nextP = case when @nextP = 0 then @len else @nextP
end
update tmp
set sal =10
where name in (Select [name] from @empTable );
END
GO
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com -
While deleting the data from cube..getting the following erros...
while deleting the data from cube the below error occured in develoment..any help
i have 4 requets.....2 are deltedd but no records for those...
2 are not deleted and they have some data..
please give me u r inputts pelase
Performing check and potential update for status control table
Message no. RSM1490
Diagnosis
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
System Response Procedure Procedure for System AdministrationHi,
Did you tried by right click on cube and delete data? are those requests are compressed or roll up? -
What is the difference between methods of deleting data from cube
Hi,
Is there any differences, pros and cons for deleting data from cube by:
1) deleting the specific request loaded into the cube
2) using selective deletion with specific characteristic values
Assumption for the above is both the options will delete the same data set.
Thanks and regards.Hi BW Beginner,
Yes, of course, there are differences.
Selective Deletion:
PROS: You can use to delete data that satisfies a certain criteria (e.g. some characteristic values).
CONS: I think this locks the whole cube during deletion
Deletion by request id:
PROS: You can easily delete all data that belongs to a certain request id (i.e. you can easily delete a bad load).
CONS: If you have already compressed the cube, you can not use deletion by request id to delete a certain request.
Hope this helps. -
Unable to get the media from the Endeca Experience manager version 11.0.0
Hi.,
Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
ThankYou!!!
C:\>cd Endeca\apps\CRS\control
C:\Endeca\apps\CRS\control>get_media.bat
[07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
[07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
[07.04.14 11:48:10] INFO: Definition updated.
[07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
[07.04.14 11:48:11] INFO: Finished exporting resource.What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.
-
Delete data from Cube which is uploaded to Open hub
Hello Friends I am required to delete the data from GL Cube, But it is connected to 2 Open Hub
which has one as table /BIC/OHZZIGL_C10 defined in Open hub destination. I deleted the data from this table in SE14, but still when I try to delete the data from cube it throws the below error
Please help me how to now delete the data from cube, when should i go in open hub t delete all the uploaded requests.
Request 1.882 already updated in target 3.913 by DTP request DTPR_4CU6JHRJ7MY889A7XBUJ0GDVK(ZZIGL_C10)
Thanks
soniyajust check on your datamart status for that request. Go to the manage screen of your infocube and check where all that request got updated using datamart status.
-
Hi All,
I have a cube which contains projects data. I want to load the data from cube to a write optimized ODS. In the cube for a project i have multiple records. But while loading the data to ODS, I have to summarise the data in such a way that i should have one record for a project i.e if the cube has data as follows:
Project Cost
abc 100
abc 200
abc 300
Then in the ODS the record should be
Project Cost
abc 600
How do i achieve this ?
Thanks,
SatyaHi Satya,
Generate export datasource from Cube ( Right click on cube ->generate export datasource).
Create update rules for the ODS and in the update rule of Cost , you will find two options
1. overwrite
2. addition.
Choose addition and activate update rules. ..This will work exactly same way you wanted.
One more thing to mention ,Put project info object in to key fields of ODS and rest all info objects in to data fields.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.
Message was edited by:
Mr Kapadia -
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
Want to Retrieve Data from cube
Hi All,
I want to use the data from the cube and perform certain calculations on it ,this calculation would be stored in buffer. Again if i'll perform certain calculations ,it would done on the buffered data not the actual data of the cube.
For example if I retrieve 100Rs from the keyfigure amount in the cube and I want to increase this by 50% .So as a result it would be now 150. But further if I'll change the percentage to 20% then I want it to be 120.But instead of this it would calculate on the last calculated amount.So it would Result into 130,as it is reading from Buffer.
Is there any way to read data from cube means in example I want to read 100 not from buffer.
Any help on this would be appreciated.
Thanx&Rgds,
Indu.Hi Karthik,
Thanks for the response.
Im elaborating the problem Im facing as under:
In the BeX Analyzer, I have created 2 analysis grids(DP1 and DP2) in a single sheet.
DP1 is built on query - Q001 and DP2 is on query Q002(which is an exact COPY of Q001).
Now the requirment is, the Planning Function that I execute needs to be executed on DP2 ( Old data ) each time I execute the Planning Function and the result of this "Simulation" has to be displayed in DP1.
Once the user is happy with the simulation, and once he clicks SAVE, the data needs to be updated in both DP1 and DP2.
The problem is that the Planning function that Im executing is Updating the Data in both the Data Providers.
Thanks
Indu -
Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.
Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
KumarWilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Updating data from PSA to Data Target
Hi,
I just want to update data from PSA to data target.
There is a process chain running daily it will updating Master Data in to 0Vendor object. This process chain is updating only upto PSA not the data target. I just want to update from PSA to data target.
There is a update rule for 0Vendor but itu2019s not active at the movement and also it is not properly mapped with the 0Vendor.
Is there any other method which I can update data from PSA to Data target with in the same process chain.
Thanks
GaneshIf this is BW 3.5, change the infopackage setting to load to data target as well.
This is a other w ay than using the update from infopackage.
if this is 7.0, Use the DTP to load from PSA(datasource) to Target.
Let me know if this helps.
Thanks
Sachin -
Unable to update the VAT_CODE column through supplier sites API
Hi,
I'm unable to update the vat code column of the ap_supplier_sites_all table using the ap_vendor_pub_pkg.update_vendor_site API.Oracle application instance 12.1.3 and OS linux.Please find the code below.I'm able to update other feilds,but not the vat_code.Please help on this.
Thanks,
Abhilash
CREATE OR REPLACE PACKAGE BODY APPS.xx_wo172304_test
AS
PROCEDURE xx_vat_wo172304 (
errbuf OUT VARCHAR2
, retcode OUT VARCHAR2
IS
CURSOR cur_vat
IS
SELECT site.*
FROM apps.ap_suppliers supp, apps.ap_supplier_sites_all site
WHERE site.vat_code IN
('CZ OEUS 20', 'CZ OEUZ 20', 'CZ OJCD 20', 'CZ OT20', 'CZ-20-EDC', 'OEUS20', 'OEUZ20', 'OPP20E'
, 'OS20', 'OT20')
AND supp.vendor_id = site.vendor_id
AND site.org_id IN (608, 1508, 2396, 2397)
AND site.vendor_site_id =68154;
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_vat_code ap_supplier_sites_all.VAT_CODE%TYPE;
l_vendor_site_id ap_supplier_sites_all.vendor_site_id%TYPE;
x_return_status VARCHAR2 (100) := NULL;
x_msg_data VARCHAR2 (1000) := NULL;
x_msg_count NUMBER := NULL;
l_error_reason VARCHAR2 (2000) := NULL;
l_user_id number := FND_GLOBAL.USER_ID;
l_last_update_login number := FND_GLOBAL.LOGIN_ID;
l_program_application_id number := FND_GLOBAL.prog_appl_id;
l_program_id number := FND_GLOBAL.conc_program_id;
l_request_id number := FND_GLOBAL.conc_request_id;
BEGIN
-- mo_global.init ('SQLAP');
FOR rec_vat IN cur_vat LOOP
IF rec_vat.org_id = 608 THEN
IF rec_vat.vat_code = 'OEUS20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'OEUZ20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'OPP20E' THEN
l_vendor_site_rec.vat_code := 'CZ OPP21E';
ELSIF rec_vat.vat_code = 'OS20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
ELSIF rec_vat.vat_code = 'OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
END IF;
ELSIF rec_vat.org_id = 1508 THEN
IF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD21';
ELSIF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
END IF;
ELSIF rec_vat.org_id = 2396 THEN
IF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
ELSIF rec_vat.org_id = 2397 THEN
IF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS 21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
END IF;
l_vendor_site_id := rec_vat.vendor_site_id;
l_vendor_site_rec.org_id := rec_vat.org_id;
l_vendor_site_rec.vendor_id := rec_vat.vendor_id;
--l_vendor_site_rec.vendor_site_code:='318581-MOR. KRU';
l_vendor_site_rec.rfq_only_site_flag := 'Y';
-- l_vendor_site_rec.last_update_date := SYSDATE;
l_vendor_site_rec.last_updated_by := 1134; MARTIN.ROUNDS
-- DBMS_OUTPUT.put_line ('VAT CODE:' || l_vendor_site_rec.vat_code);
--DBMS_OUTPUT.put_line ('Vendor Site Id:' || l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'VAT CODE:' || l_vendor_site_rec.vat_code
fnd_file.put_line (fnd_file.LOG
, 'Vendor ID:' || rec_vat.vendor_id
fnd_file.put_line (fnd_file.LOG
, 'Vendor Site Id:' || l_vendor_site_id
fnd_file.put_line (fnd_file.LOG
, 'RFQ ONLY SITE FLAG:' || l_vendor_site_rec.rfq_only_site_flag
ap_vendor_pub_pkg.update_vendor_site (p_api_version => 1
, x_return_status => x_return_status
, x_msg_count => x_msg_count
, x_msg_data => x_msg_data
, p_vendor_site_rec => l_vendor_site_rec
, p_vendor_site_id => l_vendor_site_id
); --p_calling_prog IN VARCHAR2 DEFAULT 'NOT ISETUP'
-- pos_vendor_pub_pkg.update_vendor_site (p_vendor_site_rec => l_vendor_site_rec
-- , x_return_status => x_return_status
-- , x_msg_count => x_msg_count
-- , x_msg_data => x_msg_data
-- ap_vendor_sites_pkg.update_row(
-- p_vendor_site_rec => l_vendor_site_rec,
-- p_last_update_date => sysdate,
-- p_last_updated_by => l_user_id,
-- p_last_update_login => l_last_update_login,
-- p_request_id => l_request_id ,
-- p_program_application_id => l_program_application_id,
-- p_program_id => l_program_id,
-- p_program_update_date => sysdate,
-- p_vendor_site_id => l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'Return Status:' || x_return_status
IF x_return_status <> fnd_api.g_ret_sts_success THEN
IF x_msg_count >= 1 THEN
FOR i IN 1 .. x_msg_count LOOP
IF l_error_reason IS NULL THEN
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
ELSE
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
END IF;
--DBMS_OUTPUT.put_line ('Supplier Site API Error-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Error-' || l_error_reason
END LOOP;
END IF;
ELSIF x_return_status='S' THEN
--DBMS_OUTPUT.put_line ('Supplier Site API Success-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Success-' || l_error_reason
END IF;
END LOOP;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
--DBMS_OUTPUT.put_line ('Error-' || SQLERRM);
fnd_file.put_line (fnd_file.LOG
, 'Error-' || SQLERRM
END xx_vat_wo172304;
END xx_wo172304_test;Hi,
I'm unable to update the vat code column of the ap_supplier_sites_all table using the ap_vendor_pub_pkg.update_vendor_site API.Oracle application instance 12.1.3 and OS linux.Please find the code below.I'm able to update other feilds,but not the vat_code.Please help on this.
Thanks,
Abhilash
CREATE OR REPLACE PACKAGE BODY APPS.xx_wo172304_test
AS
PROCEDURE xx_vat_wo172304 (
errbuf OUT VARCHAR2
, retcode OUT VARCHAR2
IS
CURSOR cur_vat
IS
SELECT site.*
FROM apps.ap_suppliers supp, apps.ap_supplier_sites_all site
WHERE site.vat_code IN
('CZ OEUS 20', 'CZ OEUZ 20', 'CZ OJCD 20', 'CZ OT20', 'CZ-20-EDC', 'OEUS20', 'OEUZ20', 'OPP20E'
, 'OS20', 'OT20')
AND supp.vendor_id = site.vendor_id
AND site.org_id IN (608, 1508, 2396, 2397)
AND site.vendor_site_id =68154;
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_vat_code ap_supplier_sites_all.VAT_CODE%TYPE;
l_vendor_site_id ap_supplier_sites_all.vendor_site_id%TYPE;
x_return_status VARCHAR2 (100) := NULL;
x_msg_data VARCHAR2 (1000) := NULL;
x_msg_count NUMBER := NULL;
l_error_reason VARCHAR2 (2000) := NULL;
l_user_id number := FND_GLOBAL.USER_ID;
l_last_update_login number := FND_GLOBAL.LOGIN_ID;
l_program_application_id number := FND_GLOBAL.prog_appl_id;
l_program_id number := FND_GLOBAL.conc_program_id;
l_request_id number := FND_GLOBAL.conc_request_id;
BEGIN
-- mo_global.init ('SQLAP');
FOR rec_vat IN cur_vat LOOP
IF rec_vat.org_id = 608 THEN
IF rec_vat.vat_code = 'OEUS20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'OEUZ20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'OPP20E' THEN
l_vendor_site_rec.vat_code := 'CZ OPP21E';
ELSIF rec_vat.vat_code = 'OS20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
ELSIF rec_vat.vat_code = 'OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OS21';
END IF;
ELSIF rec_vat.org_id = 1508 THEN
IF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD21';
ELSIF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
END IF;
ELSIF rec_vat.org_id = 2396 THEN
IF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
ELSIF rec_vat.org_id = 2397 THEN
IF rec_vat.vat_code = 'CZ OEUS 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUS 21';
ELSIF rec_vat.vat_code = 'CZ OEUZ 20' THEN
l_vendor_site_rec.vat_code := 'CZ OEUZ 21';
ELSIF rec_vat.vat_code = 'CZ OJCD 20' THEN
l_vendor_site_rec.vat_code := 'CZ OJCD 21';
ELSIF rec_vat.vat_code = 'CZ OT20' THEN
l_vendor_site_rec.vat_code := 'CZ OT21';
ELSIF rec_vat.vat_code = 'CZ-20-EDC' THEN
l_vendor_site_rec.vat_code := 'CZ-21-EDC';
END IF;
END IF;
l_vendor_site_id := rec_vat.vendor_site_id;
l_vendor_site_rec.org_id := rec_vat.org_id;
l_vendor_site_rec.vendor_id := rec_vat.vendor_id;
--l_vendor_site_rec.vendor_site_code:='318581-MOR. KRU';
l_vendor_site_rec.rfq_only_site_flag := 'Y';
-- l_vendor_site_rec.last_update_date := SYSDATE;
l_vendor_site_rec.last_updated_by := 1134; MARTIN.ROUNDS
-- DBMS_OUTPUT.put_line ('VAT CODE:' || l_vendor_site_rec.vat_code);
--DBMS_OUTPUT.put_line ('Vendor Site Id:' || l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'VAT CODE:' || l_vendor_site_rec.vat_code
fnd_file.put_line (fnd_file.LOG
, 'Vendor ID:' || rec_vat.vendor_id
fnd_file.put_line (fnd_file.LOG
, 'Vendor Site Id:' || l_vendor_site_id
fnd_file.put_line (fnd_file.LOG
, 'RFQ ONLY SITE FLAG:' || l_vendor_site_rec.rfq_only_site_flag
ap_vendor_pub_pkg.update_vendor_site (p_api_version => 1
, x_return_status => x_return_status
, x_msg_count => x_msg_count
, x_msg_data => x_msg_data
, p_vendor_site_rec => l_vendor_site_rec
, p_vendor_site_id => l_vendor_site_id
); --p_calling_prog IN VARCHAR2 DEFAULT 'NOT ISETUP'
-- pos_vendor_pub_pkg.update_vendor_site (p_vendor_site_rec => l_vendor_site_rec
-- , x_return_status => x_return_status
-- , x_msg_count => x_msg_count
-- , x_msg_data => x_msg_data
-- ap_vendor_sites_pkg.update_row(
-- p_vendor_site_rec => l_vendor_site_rec,
-- p_last_update_date => sysdate,
-- p_last_updated_by => l_user_id,
-- p_last_update_login => l_last_update_login,
-- p_request_id => l_request_id ,
-- p_program_application_id => l_program_application_id,
-- p_program_id => l_program_id,
-- p_program_update_date => sysdate,
-- p_vendor_site_id => l_vendor_site_id);
fnd_file.put_line (fnd_file.LOG
, 'Return Status:' || x_return_status
IF x_return_status <> fnd_api.g_ret_sts_success THEN
IF x_msg_count >= 1 THEN
FOR i IN 1 .. x_msg_count LOOP
IF l_error_reason IS NULL THEN
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
ELSE
l_error_reason :=
l_error_reason
|| ','
|| SUBSTR (fnd_msg_pub.get (p_encoded => fnd_api.g_false)
, 1
, 255
|| SQLERRM;
END IF;
--DBMS_OUTPUT.put_line ('Supplier Site API Error-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Error-' || l_error_reason
END LOOP;
END IF;
ELSIF x_return_status='S' THEN
--DBMS_OUTPUT.put_line ('Supplier Site API Success-' || l_error_reason);
fnd_file.put_line (fnd_file.LOG
, 'Supplier Site API Success-' || l_error_reason
END IF;
END LOOP;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
--DBMS_OUTPUT.put_line ('Error-' || SQLERRM);
fnd_file.put_line (fnd_file.LOG
, 'Error-' || SQLERRM
END xx_vat_wo172304;
END xx_wo172304_test; -
UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION
Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn . -
B2b unable to pick the file from xml gateway
Hi All,
I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
Still its unable to pick the files from xml gateway.
Clarify my understanding please
While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
Here i am attaching the logs:
2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
file.receiver.wallet_password = *****
file.receiver.polling_interval = 5
file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
file.receiver.marker = false
marker = false
ccc = false
file.receiver.channel_mask = None
file.receiver.minimum_age = 0
filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
file.receiver.van = false
file.sender.channel_mask = None
file.receiver.user = eiced1
PROTOCOL_ENDPOINT = null
file.receiver.password = *****
file.receiver.preserve_filename = false
transport_callout_waittime = 30
preserve_filename = false
file.receiver.ccc = false
van = false
polling_interval = 5
2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
regards
cnuAnuj,
The log which i placed on top, thats the complete log and DC log is given below
2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered
Maybe you are looking for
-
updated "successfully" to iOS7 on my 4S but now it takes FOREVER to recognize each keystroke - even to type in passcode. also takes forever to type a single key in text. HELP.
-
BT Infinity, XboX and Battlefield 3
Hi, I have a problem with playing Battlefield 3 on Xbox since i upgraded to 40meg infinity and the homehub 3. The game is no longer fluid during gameplay it is stuttering, laggy and overall feels like it's been covered in treacle - i didn't suffer an
-
Windows Server 2012 R2 SQL Server 2012 After a recent cluster failover from node 1 to node 2, the Analysis Services role is in a failed state, with the service stopped. When attempting to start the service, there are two error messages captured in Fa
-
Add FI document number to message M8 060 (MIRO)?
Hi We have a user request to have the FI document no. added to the message when posting an invoice. The standard message shows only the MM document. The user claims that it took 7 minutes to change it at her previous employer, but I can't see any way
-
Hey all, Anyone know where I can get free (or inexpensive) Moog or accordian plug-ins for Logic? Thanks?