UNABLE TO SAVE TRIP REQUEST
I am trying a travel management process by creating TRIP REQUEST and am getting the error message ,
There is" [no trip for keys 00000010 0000000000 000]", and ['No entry in table T549Q for argument 00 at time 20100419]'
Please can anyone assist on how to resolve to the issue .
Thank You.
Thanks, but i have tried using sm30 and customised for the payroll area but am still getting the same error message
Can any one please assist
I am trying a travel management process by creating TRIP REQUEST and am getting the error message ,
There is" no trip for keys 00000010 0000000000 000", and 'No entry in table T549Q for argument 00 at time 20100419'
Please can anyone assist on how to resolve to the issue .
Thank You.
Similar Messages
-
HI, I have Forefront 2010 for Exchange installed for an Exchange 2007 SP2 running on Windows 2003 x64 SP2. Exchange has all roles installed on the same server.
When I try to save any change on Forefront I got the following message:
Microsoft Forefront 2010 for Exchange is unable to perform the requested function. This may be because Forefront services are unavailable. Ensure that all Microsoft Forefront services are running and that WindowsPower Shell is functional
Well, our FF services are running and PowerShell is functional. I checked some forums and found some problems when there is entries in the IP Allow / Block lists in Exchange UI. I removed those entries but problem remains.
Any ideas would be appreciated.
Xavier VillafuerteIn my case, I was able to work around this issue by using PowerShell directly. For example, to run an on-demand scan for all mailboxes, this worked:
#open EMS
$aliases = (get-mailbox -result unlimited).alias
Add-PsSnapin FSSPSSnapin
set-FseOnDemandScan -MailboxList $aliases
Start-FseOnDemandScan -EnableVirusScan $true
Windows 2008 R2 SP1
Exchange 2010 SP3, RU9
PowerShell 4.0 present on the machine (though EMS runs PS 2.0)
Forefront PowerShell cmdlets:
https://technet.microsoft.com/en-us/library/cc482986.aspx
Mike Crowley | MVP
My Blog --
Baseline Technologies -
Today while working on PS Elements 12 I was asked if I wanted to save my work. I said yes. After that I was unable to save my editing work on PSE 12. I use OS X Mavericks 10.9.3. Instead of saving my work I continue to get a "could not complete your request because of a program error. My work can't be saved. I tried downloading the Creative Cloud and tried both settings, save to the cloud and do not save to the cloud. Either way I cannot save my work and I am stuck. Any help would be appreciated. Thank you
Sorry, but I don't understand. PSE has nothing at all to do with creative cloud. If you're saying that you can't save work in any program, that's probably something wrong with your OS X installation. If you just are having a problem in PSE, the first thing to do is to go to the editor's preferences>general, click this button, and restart the editor:
-
Unable to save the ALV layout variant and display of selection screen on F4
Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
l_exit TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
IMPORTING
e_exit = l_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF l_exit EQ space.
c_variant = ls_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = ws_extract1-report
i_callback_user_command = ws_user_command
is_layout = ws_layout
it_fieldcat = wt_fieldcat
it_sort = wt_sort
i_save = 'A'
is_variant = ws_variant2
it_events = wt_events[]
TABLES
t_outtab = wt_edition.
* Call ALV editor in grid mode
ELSE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = ws_extract1-report
i_callback_user_command = ws_user_command
it_fieldcat = wt_fieldcat
it_sort = wt_sort
i_save = 'A'
is_variant = ws_variant2
it_events = wt_events[]
TABLES
t_outtab = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh -
The server was unable to process the request due to an internal error.
Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227
Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks ! -
Getting an error in Timesheet as "Unable to save your data"
Hi
When i am entering the data in timesheet for a WBS element-Annual leave,on confirmation page getting an error as "Unable to save your data"
Can anyone help me on this issue
ThanksHi,
check here:
Errors in ESS Timesheet and Leave Request
Also, if this doesn't help you, please post the error's detailed default trace log of NWA Monitoring here. Maybe you also got something in ST22 in Backend
best regard, Lukas -
Unable to Save in Port Range Forwarding
I'm using the BEFW11S4 wireless router and am unable to save the new port range forwarding settings I have entered. Everytime I click Save Settings, I receive a box which reads:
"The server 192.168.1.1 at Linksys BEFW11S4 V4 requires a username and password.
Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection)."
When I enter the same u/p that I used to access the router in the first place, it rejects and keeps bringing up the log in screen.
I cannot get the port range forwarding to save at all due to this.
Does anyone have any suggestions?
Thank you!try remembering the password you used for first time while installing the router .... if not then use default password admin with out any username ....
If still not working then you need to reset the router .... -
Microsoft forefront protection 2010 for exchange server is unable to perform the requested function
I get the following error any time I try and change any setting:
Microsoft Forefront Protection 2010 for Exchange Server is unable to perform the requested function. This may be becuase Microsoft ForeFront services are unavailable. Ensure that all Microsoft ForeFront services are running and that Windows Powershell is
functional.
I have installed the latest rollup for SEP. Rollup 5 I think. I have rebooted the server. I have checked the permissions and they are correct.
Any thoughts?I posted a PowerShell-based workaround in the other thread:
https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
Mike Crowley | MVP
My Blog --
Baseline Technologies -
Photoshop CC unable to save as a pdf/x-1a
I'm trying to get buiness cards printed and the company has requested that they be saved as a PDF/X-1A but when I do this its coming up as unable to save due to a program error. Anyone have any idea what the problem is?
Can you save a PDF/X-1a from other files?
What are the image’s Color Mode, bit depth, …?
What have you done for trouble-shooting so far?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html -
Unable to save a Z-Tcode in Custom Package,unable to assign a transport Req
Hi all,
I am trying to create a T-code for standard SAP Program RSTXPDFT4. I was able to successfully create a T-code for this report program which has selection screen.
But I created it as a Local Object.
Now I am trying to create another T-code for the same SAP standard program in our custom package used in our company called /ABCDE/FGH01.
But it does not allow me to save the T-code in this custom package and throws an error saying
u201CCustomer Object Z_TCODE cannot be assigned to package /ABCDE/FGH01 u201D.
Why am I unable to save it in a custom package and assign a transport request for it, Is it because I am creating t-code for standard SAP program? If I try to save it as local object I donu2019t get any error and it works perfect. But my actual requirement is to make the object transportable and save in custom package.
Some one please help me with this./ABCDE/FGH01 <<< "not a custom package.. custom packages start with Z
/ABCDE/ is a registered namespace, and could very well be customer code. It is not all Y and Z any more.
One thing we noticed when we used a registered namespace was that if your package was in the registered namespace, then your object also had to be. That is, if your tcode starts with Z, your package name must also start with Z. if your package name starts with /ABCDE, the so too must your TCODE. I dont know this to be 100% fact, becuase we no longer use a registered namepsace, i just seem to recall that it was true.
be wary of creating tcodes that start with /, too... the users will always have to put /n or /o in front of them. In general, we really hated using the registered namepsace, and quickly renamed a TON of stuff to get away from it. -
[HELP] unable to find the requested server
Why every try connect trough WiFi shown error message "unable to find the requested server"
BB Storm II 9520,
Anyone can help....
TQOK, two things:
ON your BlackBerry, go to Options > Advanced > Browser.
Set that to HOTSPOT and save.
Now, connected to a WiFi router, open the internet browser on the BlackBerry try going to mobile.blackberry.com
Does it work?
Also, Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the mobile network internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Problems to trigger workflow in Trip Request Creation
Hi masters,
I am having problems to trigger a workflow for Travel Requests in FI-TV module. When I save a Trip Request and go to SWEL transaction, there is a message saying: "No recipient found" or something like this. I am not finding anything to solve this problem.
Anyone can help me?
Thank you very much!!!
Diogo...Hello,
"No recipient found" means an event had no matching workflow in SWE2.
Look in SWEL to see which event you're actually generating and then look it up in SWE2 to see if there is a matching workflow for that object/event combination.
regards
Rick Bakker
Hanabi Technology -
Unable to save data entered in editable field of IW37N output
Hi Gurus,
I have made one of the fields in IW37N ALV output as editable using exit IWOC0004. When I enter the values in the field, I am unable to save the data to the order. The orders are getting successfully released but the values entered are not saved in database. Please help.
Thanks,
Pramod.VDiscovered that the problem was with the Adobe version. Updated version to 8.1.1 and installed Active X control software and things started working.
-
Unable to save data in record working time
Hi All,
I am working on ESS portal , when I try to record & save working time in portal , it throw an error message as 'Unable to save data'.
Can you plz assist me on this.
Usefull answers will be awarded.
Thanks,
NilimaHi ALL,
I'm too facing the same problem....usefull answers will be awarded. -
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
Maybe you are looking for
-
Is there a way that digital signatures can be uploaded on SAP and that it can be encrypted so that it cannot be copied by anyone.
-
B1i - KeyExpansion no payload in b1i.message
Hi experts, we create a b1i szenario with keyexpansion. the result of keyexpansion querry for the payload area in b1i.message is missing Please check some snippets from our xml- & xsl-files: BETAMETA <KeyExpansionRule side="R"> <Target
-
ITunes freezes on "finishing sync."
My 4th gen iPod Touch will not get off of "finishing sync" in iTunes. It was stuck on "determining which tracks to sync" but then I changed my settings to manual sync. I'm not attempting to load much content, so it shouldn't be that type of issue. An
-
I have Illustrator CS2, and work on a Toshiba Notebook in Windows. I have a Corsair 'Thumb' When I save a file to the Thumb all my layers flatten. An option screen comes up and the 'link to' row as well as the next row, are grayed out. I check the bo
-
Quality of DVD *****
Hey I am working on my first video project in iMovie. It's about 30-40 minutes of footage and/or photos. When I burned a test copy using iDVD, I put it in my DVD player to watch on TV and it was skipping and having little hiccups that were not visibl