Unable to search documents after creating Index

hi all,
i've created index and assigned datasources to that index.but when i try to search that documents it is showing tht "No matches have been found "
where as in applicaiton log it is displauing follwing message
Error 11/29/05 6:30:03 PM XCrawlerService Failed to create crawler task SubscriptionCrawler - com.sapportals.wcm.service.xcrawler.XCrawlerException: The SQL statement "SELECT "XCRW_TASK_INDEX" FROM "KMC_XCRW_TASKS" WHERE "XCRW_TASK_ID" = ?" contains the semantics error[s]: type check error: the e
so, can any body help me to solve above problem
regards
gnana

Hi Gnana,
You may try searching on http://service.sap.com/patches
You will have to search for ur requrired patches. You would also find pdfs, giving details on the same.
All the best.
Awaiting Reply.
Warm Regards,
Ritu R Hunjan
Message was edited by: Ritu Hunjan

Similar Messages

Can't select "include book documents" when creating index in InDesign CC

I'm trying to make an index for several dokuments in a book. I've made the index but when I try to generate the index the checkbox is greyed out so I can't check it. Do You know what's wrong?

Thank You. That worked well.
One more question: It looks as if the index does not include the words of all the documents in the book. Is it something I do wrong?
Thanks
Henning
Fra: Peter Spier <[email protected]<mailto:[email protected]>>
Svar til: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Dato: onsdag 10. juli 2013 13:04
Til: Henning Kristoffersen <[email protected]<mailto:[email protected]>>
Emne: Can't select "include book documents" when creating index in InDesign CC
Re: Can't select "include book documents" when creating index in InDesign CC
created by Peter Spier<http://forums.adobe.com/people/P+Spier> in InDesign - View the full discussion<http://forums.adobe.com/message/5491834#5491834

Compute Statistics after creating indexes

Hi, I have to create some indexes in a production database.
I have a doubt.
Do I need to Compute Statistics after creating indexes?
Or when I create they automatically are computed?
Thanks for any help.
Edited by: Petri BR on May 14, 2013 3:39 PM

Petri BR wrote:
Hi, I have to create some indexes in a production database.
I have a doubt.
Do I need to Compute Statistics after creating indexes?answer is version dependeent.
Or when I create they automatically are computed?answer depends upon which version of Oracle.
How do I ask a question on the forums?
SQL and PL/SQL FAQ
you should ALWAYS provide Oracle version to FOUR decimal places.
below is even better
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionHandle:     Petri BR
Status Level:     Newbie
Registered:     Dec 10, 2007
Total Posts:     119
Total Questions:     29 (18 unresolved)
I extend to you my condolences; since you rarely get your questions answered here.

Unable to edit documents after AVG installation

I have a dual drive Toshiba laptop, which has been recntly updated from Vista to Windows 7. Windows 7 has taken up most of my C drive, so I have had to put programs onto the other data E drive. The other day I bought AVG ant-virus 2011 and put it onto my computer (data e drive). Since then, even after taking avg off, I am unable to edit documents on office Word or OpenOffice. it seems to be doing it to my external drive (that I have added) as well as now. Its strange since this only started as soon as i used AVG. Any suggestions what the problem could be? How it can be resolved.
I really need some help, as my computer seems to be slowly dying! Tried to get in contact with AVG but they seem just to be ignoring the problem at the moment.
Thanks for any help,

Hi buddy,
> Its strange since this only started as soon as i used AVG.
In this case I would contact AVG directly if they can say something about this or if its a known issue. I never heard about this but AVG should know what to do now.
I dont know what notebook you have but Im pretty sure its a software issue and it seems to be related to AVG

After creating index query is taking more

Hello all,
I am trying the following..and not getting why the query is taking more time after creating the index
SQL> SELECT distinct version_no
2 FROM iefloa_data_anal
3 WHERE datetime_inserted > to_date('17-02-2004','dd-mm-yyyy');
VERSION_NO
999
Elapsed: 00:00:22.16
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=15 Card=1 Bytes=22)
1 0 SORT (UNIQUE) (Cost=15 Card=1 Bytes=22)
2 1 TABLE ACCESS (FULL) OF 'IEFLOA_DATA_ANAL' (Cost=2 Card=1
Bytes=22)
/*******************Here I am creating the Index************/
SQL> create index t_ind_date on iefloa_data_anal(datetime_inserted);
Index created.
Elapsed: 00:07:427.38
SQL> SELECT distinct version_no
2 FROM iefloa_data_anal
3 WHERE datetime_inserted > to_date('17-02-2004','dd-mm-yyyy');
VERSION_NO
999
Elapsed: 00:00:40.10
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=14 Card=1 Bytes=22)
1 0 SORT (UNIQUE) (Cost=14 Card=1 Bytes=22)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'IEFLOA_DATA_ANAL' (Cos
t=1 Card=1 Bytes=22)
3 2 INDEX (RANGE SCAN) OF 'T_IND_DATE' (NON-UNIQUE) (Cost=
1 Card=1)
can anybody explains whats the reason...
the table is having around 1.5 crore records
regards

The execution plan clearly shows that Oracle thinks only one row is going to match that condition on the index ("Card=1"). Is that a true statement? If not, you should make sure your stats are accurate. If the data is highly skewed, you may need to put a histogram on that column.
Another possibility is that the index is on much slower disks than the table. Although, I can't imagine any range scan on an index that has only one matching value taking that long. How about doing a full trace (SET AUTOTRACE ON) and posting the logical and physical i/o information?

Unable to open documents after scanning

I am unable to open my documents after scanning. I keep getting the message Adobe reader could not open because it is either not a supported file type or because the file is damaged, then it redirects me to a buya subcription Adobe reader XI. These documents are just regular standard 3 to 11 gray scale scans, nothing special. I just need my regulay Adobe reader to open A PDF file. Please help.

just to clarify, you're scanning a document and then you are saving that as a pdf file, correct?
in particular, you are not trying to add the scanned document to an already existing file (pdf or otherwise), correct?
if yes and yes and your reader and can that pdf ok, you have a scanner problem. try updating your scanner's drivers.

Unable to search documents

hi all
i've created index and its status is running.
but when i perform search operation it is not displating results.in application log the following message is displayed.
<b>Error 11/30/05 12:33:03 AM XCrawlerService Failed to create crawler task ind_000 Knowledge Repository - com.sapportals.wcm.service.xcrawler.XCrawlerException: The SQL statement "SELECT "XCRW_TASK_INDEX" FROM "KMC_XCRW_TASKS" WHERE "XCRW_TASK_ID" = ?" contains the semantics error[s]: type check err </b>

I just noticed the other thread where you're posting the same problem; as Dirk mentioned it should be fixed with SR1 aka SP9 patch3. It should be available from http://service.sap.com; look for sw download, entry by application, netweaver, netweaver04, and so on.

After Creating Index ???

We creating a New Custom Index on MSEG and transported to production?
What are the followup activites to make the usage of created index immediately ??
Rdgs
PR

Hi,
Oracle use index after it have been created based on table statistics (CBO)
I suggest you create statistics for this index and update the statistics for the table MSEG.
Use the report RSANAORA, or the transaction DB20.
Best Regards,
Itamar Marioto

After creating a searchable database I am unable to search documents based off of the bates number.

I just finished creating a searchable database in Adobe Acrobat Pro and it finds documents based off of search terms fine. It does not however locate documents based off of the Bates number that I am using as a search term. Why won't it let me do this?

Hi Dodu.NET,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
In addition you cna try these steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.

Can't search emails after creating encrypted mail folder

Using Disk Utility I created an encrypted folder for my Library/Mail folder. I created the folder with a password, then created an alias for it which I stuck in the Library folder to act as my new 'Mail' folder. So now when I open up Apple Mail, I'm asked for a password so that I can start reading emails. Great, works fine. But now I can't use the search tool to find emails according to various key words. Anyone know how I can get this feature working again?

I've had trouble with JavaMail starting on July 21st. I've used the same code for months, but all of a sudden, I can't delete messages from Gmail using the DELETED flag. I open the folder as READ_WRITE, grab the messages from the folder, set the DELETED flag, double check to make sure the DELETED flag was set, then close the folder (setting EXPUNGE to TRUE). Nothing happens. No exception is thrown or message is given, and no messages get deleted from the inbox (they just remain sitting there). I've tried calling the EXPUNGE method manually after setting the DELETED flag, but then it complained that the underlying implementation could not execute the method because the message was READ ONLY!!! I'm out of ideas. I've posted on Google's forums, but every other .NET and command terminal commands seem to still be working. I'm wondering if Gmail altered their configuration to become more compliant with the IMAP protocol, and JavaMail (or its underlying implementation) is still not 100% compliant?
Thanks for your consideration.
Joshua

Unable to modify UDF after creating it via UI-DI API

Hi,
I've create UDTs and their relevant UDFs via DI API within a UI application. Now, although it does everything as expected, it does give me the following error if I try to modify any of the newly created UDF's from within SAP B1. The error I get is:
[User Fields - Description - Edit Type] , 'Field cannot be updated (ODBC -1029)' [Message 131-183]
If I try to add default values or modify the field size etc. I get the above error. At this point no transactions have been created within the UDT of the UDF etither.
Any ideas?

Hi Gabriela ,
Thanks for the post.
I'm not sure though if I understand you correctly. You see I get the error message on every UDT and it's subsequent UDFs I create though code, only IF I try to edit them afterwards manually from within SAP.
When the Addon starts, it checks to see if the tables exists, if not then it goes and creates them (and their UDFs). I can then write to and refence the fields no problems. It's only when I try to edit the field (even though there are no underlying values in the tables) that I get the error message.
Now, if I understand you correctly you are suggesting that I delete the field manually (from SAP) and re-create them with the new changes? One problem with that would be then, that if I wanted to add more default values for example in the future AND there was already transactions recorded against that field, I don't think SAP will let me delete the field and re-create it?
Surely, this sounds like a bug in the DI creation of the UDFs then.. I was hoping that there would be a setting, which I could set when I create the table and/or it's fields via code.
Thanks for your help.
Dev

Unable to "Buy Book" after Creating a Custom Book

I just created a custom book with the required minimum number of pages, but the option to "Buy the Book" is not available to me. Is there something else I need to do? I'm pretty new to Aperture. Any help would be appreciated!

I find the custom book feature very very useful in Aperture. To date I have always had books created through a local printer (their quality and binding format is excellent). I build the book in Aperture (custom as I prefer A4 portrait), use the PDF output option and then give the printers the PDFs which they then print to create the book.
I have thought about trying the Apple service but an unsure of the "suede-like" cover and prefer hard back. Might try the soft covers. But anyway, other book printers are happy to take the PDF output (e.g. my local printers, Blurb and probably others).
Ian

Unable to search document (CV04N) using Objectlink of Material BOM

Dear All,
I am using SAP ECC 6.0 EHP4.
When I execute tcode CV04N and go to object link tab and select object link tab of "Material BOM" it gives "Runtime Errors DYNPRO_NOT_FOUND"
Error Details:
Short text
Dynpro does not exist
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCV100" had to be termin
come across a statement that unfortunately cannot be
Error analysis
The system attempted to use dynpro 1257 in program "S
This dynpro does not exist.
Trigger Location of Runtime Error
Program SAPLCV100
Include LCV100O01
Row 491
Module type (MODULE PBO)
Module Name INIT_404
I coud not find any help in OSS. Have someone of you an idea?
Thanks
Arnfried

Hello Christoph,
thanks for the link.
I have checked the settings in transaction SPRO and DC10. All seems to be correct.
The dynpro 1257 exists in function group CV130 and in DC10 the dynpro no 257 is maintained.
I have found the OSS Note 484836 - CV04N object link screen 1254 does not exist. The note describes a similar problem.
It would seem that dynpro 1257 must also exists in function group CV100. I thing its not enough to copy the dynpro 1257 from function group CV130 to CV100.
To avoid the error can we simply delete the corresponding settings in DC10 for dynpro 257? Or has deletion of the entry any side effects in other modules/programs?
Thanks
Arnfried

Unable to open documents after Update to OSX 10.9

I have updated my iMac to OSX 10.9 (Mavericks)
This has resulted in a large number being unavailable for access.
I cannot open a number of from Pages, Numbers, Keynotes etc
Is there a quick shortcut, and a central place to adjust these
Beano

Do note that the updater saved the iWork '09 apps in a separate folder. Also, note that the new ones are crippled to match up with their iOS counterparts; i.e., dumbed down. See these for details:
http://www.betalogue.com/2013/10/24/pages-5-disaster/
https://discussions.apple.com/thread/5468056?start=0&tstart=0
http://9to5mac.com/2013/10/25/new-iwork-ilife-apps-go-for-simplicity-upset-power -users-all-over-again/#comments

Compute Statistics after create a index

Good night, I tryed it before and got no help.
So I'll try it again, because I didn't find it yet.
I have to create some indexes in a production database.
I have a doubt.
Do I need to Compute Statistics after creating indexes?
Or when I create they automatically are computed?
Thanks for any help.
The version I'm using is:
Oracle Database 10g Release 10.2.0.5.0 - 64bit Production
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production

Petri BR wrote:
Good night, I tryed it before and got no help.
So I'll try it again, because I didn't find it yet.
I have to create some indexes in a production database.
I have a doubt.
Do I need to Compute Statistics after creating indexes?after CREATE INDEX what are the values for the index statistics?
Or when I create they automatically are computed?Just look at the statistics values after issuing CREATE INDEX & answer the question yourself!

Unable to search documents after creating Index

Similar Messages

Maybe you are looking for