Unable to select Create checkbox

Hello everyone,
I created an entity object and selected create,remove,validate checkboxes in java tab for EOImpl class
but after I click appy and go to EOImpl class, I dont see any create() in EOImpl.
I went ahead and clicked edit EO, and then unchecked generate EO Impl, then checked generate EOImpl and again selected create,validate and remove checkboxes
but still I dont see a create() in my EOImpl class
Kindly suggest me on what could be the problem.
I'll try a workaround to manually write the create()
Thanks
Ivar

Ravi,
This is really a weird situation. Create a test workSpace & TestProject & check whether still the problem occurs.
If still the problem persist, then follow the steps as you have mentioned like putting the Create method manually.
Regards,
Gyan

Similar Messages

In SRM Portal, while doing carry out sourcing, unable to select "Create Draft" Button Choice.

Hi,
In SRM Portal, while doing carry out sourcing, we are unable to select option "CREATE DRAFT" Button choice. We have two users, one with standard role "/SAPSRM/ST_PURCHASER - SAP SRM: Strategic Purchaser" for whom Create draft is working fine. Another user who has the custom copied version of this role is not able to Create Draft since the button choice option is not opening for him.
Web dynpro component - /SAPSRM/WDC_DO_SOCO_GAF_2
View - V_AO_SOCO_GAF_2
Could you please help me to locate the code where this button choice is populated? What are the parameters that need to be checked in Roles to identify the reason for this wrong behaviour with custom role?
Regards,
Jeena

Hi,
Check entries in SM30 --> /SAPSRM/V_SOCO but, there should not be any issues here, as you are telling that it is working for Standard Role.
Please overwrite the Z role one more time, and ensure that you have given proper authorization in the Org Level of the Role and regenerate the profile. It should work.
Ganapathi

Boot Camp to install windows, unable to select the checkbox

Hello,
I recently purchased windows 8 64bit on a dvd and I'm trying to install it using Boot Camp Assistance on my Macbook Pro (early 2011). However, the second option is greyed out and I cannot select it.
I already downloaded the latest support software and I'm not sure why I'm unable to select the second option "Install or remove Windows 7 or later version"
Please Help

/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         439.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:                  Apple_HFS Backup                  59.9 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *438.9 GB   disk1
                                 Logical Volume on disk0s2
                                 Unencrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            IR3_CCSA_X64FRE_EN-... *4.1 GB     disk2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *16.4 GB    disk3
   1:                 DOS_FAT_32 UNTITLED                16.4 GB    disk3s1
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Boot Camp              *1.4 GB     disk4
Abdullas-MacBook-Pro:~ 3bdulla3moodi$
Name:         Macintosh HD
    Status:       Online
    Size:         439248101376 B (439.2 GB)
    Free Space:   18882560 B (18.9 MB)
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     439248101376 B (439.2 GB)
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
            Disk:                  disk1
            Status:                Online
            Size (Total):          438876897280 B (438.9 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (no decryption required)
            LV Name:               Macintosh HD

Doc Library List View Row Checkbox Unable to Select or Check

I have code behind that adds webparts to a page. An example of the code is show below.
# web is an SPWeb object
# wpMgr is the web part manager
# Get the list
SPList list = web.Lists["Document Library"];
# Create the list view webpart
XsltListViewWebPart lvwp = new XsltListViewWebPart()
ListId = list.ID,
Title = "Documents",
ViewGuid = list.DefaultView.ID.ToString(),
XmlDefinition = list.DefaultView.GetViewXml()
# Add the list view webpart to the page
wpMgr.AddWebPart(lvwp, "Main", 0);
Problem:
The issue we are having is only with document libraries. When we try to select the document library in the list view by selecting the checkbox, the item appears to be checked, but when you move the cursor away from the row, the checkbox is no longer selected.
This issue is found in Firefox and IE. I'm getting a js error in the core.js file's CountSelectedItems(a) function, shown below.
function CountSelectedItems(a) {
ULSrLq:;
if(a.CurrentSelectedItems==null) a.CurrentSelectedItems=0;
return a.CurrentSelectedItems}
The js error is "Unable to get property 'CurrentSelectedItems' of undefined or null reference". So I read this as the object a being null.
Workaround:
If you edit the webpart and click on "OK", it seems to refresh something and this is no longer an issue.
Solution:
I've tried the ListViewWebPart as well, but that didn't work for me either. Any advice is greatly appreciated.
Thanks
-Gunjan

We experienced the exact same issue and resolved it by using the code below.
In short are we trimming the ParameterBinding from White spaces before adding the webpart. After adding the webpart we update an unimportant property and save back the changes. The strange thing is that this code used to work previously before we added the
"fixup". With this solution you can keep the Group by clause in the CAML Query.
Please mark as answer if it solves your problem.
SPLimitedWebPartManager webPartManager = web.GetLimitedWebPartManager(pageUrl, PersonalizationScope.Shared);
XsltListViewWebPart XsltWebPart = new XsltListViewWebPart();
SPList list = web.Lists[listName];
XsltWebPart.ListId = list.ID;
XsltWebPart.ViewGuid = list.Views[viewName].ID.ToString("B").ToUpperInvariant();
XsltWebPart.XslLink = XslLinkUrl;
XElement el = XElement.Parse("<root>" + XsltWebPart.ParameterBindings + "</root>");
var reader = el.CreateReader();
reader.MoveToContent();
string trimmedBindind = reader.ReadInnerXml();
XsltWebPart.ParameterBindings = trimmedBindind;
webPartManager.AddWebPart(XsltWebPart, zoneId, zoneIndex);
int wpIndex = webPartManager.WebParts.IndexOf(XsltWebPart);
var xwp = (Microsoft.SharePoint.WebPartPages.XsltListViewWebPart) webPartManager.WebParts[wpIndex];
xwp.ExportMode = WebPartExportMode.All;
webPartManager.SaveChanges(xwp);

Unable to select the created Ports(greyed out) in the import manager

Hi ,
We have created some ports with specific Remote system and XML schema's and also assigned the map to it.
The processing type is manual for now,since we want to load data manually using import manager from the Ready folder of the port since PI is dropping the files there.But when I load import manager and select the file type as "Port" and also the relevant remote system ,I cannot select any of the list of ports created ,All are greyed out.
All I need is to select "Port" option ,remote system and use the created port from the dropdown list of import manager " connect to source" step,which i am unable to select as all the port s are greyed out and unable to select.
Any help greatly appreciated...

Hello Arvind,
There is no need to start the MDIS (Import server) if you are importing the data manually.you just open the import manager, login into the repository and select type as XML as per your case and select the remote system (it depends on your requirement) and select the port on which your xml files resides.and enter in the import manager then map you data accordingly and you can import into the repository.
when you want to automate the process for importing the data in repository then you will need to Start the import Server. In that case import server automatically pick the file from the ready port folder and also set the property in console as the processing type is Automatic.
Hope this will help you and clear your doubt.
TNR,
Saurabh...
Reward if found helpful.

Selecting the Checkboxes on Interactive Report

Hello
I have two checkboxes on a Interactive Report:
My query is as follows:
select
apex_item.checkbox(1, empno, 'ENABLED'),
apex_item.checkbox(2, deptno, 'ENABLED'),
ename,
sal
from emp;
I have a conditional button 'Check N Update' which will invoke the Pl/SQL process:
FOR i in 1..APEX_APPLICATION.G_F01.count
LOOP
l_empno := APEX_APPLICATION.G_F01(i);
UPDATE XXX ....;
END LOOP;
FOR i in 1..APEX_APPLICATION.G_F02.count
LOOP
l_empno := APEX_APPLICATION.G_F02(i);
UPDATE XXX ....;
END LOOP;
What I need is I need to check a CONDITION, if BOTH the checkbox's are selected then I need to throw an ERROR saying.
YOU CANNOT SELECT BOTH the boxes.
Please let me know how can I get this.
Appreciate your help.
thanks

Hi
Using a RadioGroup would actually create one radio button for each line and mean that you could only select one line.
As the submit process will only return the boxes that have been checked, you only have access to the ticked items and as these contain just the EMPNO and DEPTNO values, you have no way to check if any two are from the same row.
This means that you will have to rethink your report slightly. You will need to have two checkboxes with ROWNUM as the value (if the report is sorted somehow, this may make this more awkward as ROWNUM is from the unsorted data) and make your EMPNO and DEPTNO hidden fields. The when the user submits the page, you will have to compare the ROWNUM values for the first column with all the ROWNUM values for the second column to see if there's a match.
As an alternative, you could have a select list for the first item and give the user options for EMPNO, DEPTNO, Both, Neither?
Andy

Unable to select the value from a list item in forms 6i

Hi ,
I'am using forms 6i. I have created a list item in my form as below.
Item_type = list item
list style - popup list
elements in list - A, B, C,D
When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
This is very urgent. Any suggestions would be of great help.
Thanks
Deepthi

If you have a list item where you have:
Display A value 1
Display B value 2
Display C value 3
Display D value 4
If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
Otherwise in an initialisation triger have
:block.list_item := 1;
HTH
Tony

Unable to select Quantitative data during creation of MIC while using Clas

*Unable to select Quantitative data during creation of MIC while using Class characterstics*
Dear All,
I want to transfer MIC Result recording to Batch class.
For that, i am trying to create MIC & giving class characteristic name in QS21, and then under control data, I am unable to select, Quantitative. By default system is selecting Qualitative. But I want to create that MIC as Quantitative.
Is there any setting for this?
Please help...
Thanks in advance
Edited by: Sitarami Reddy Kummeta on Nov 30, 2009 6:44 PM

Hi
to have master inspection characteristic quantitative ,the class characteristic must be of format "NUM":
Regards
Sujit

To display a VARCHAR field in database as select boolean checkbox

Hi,
i have a table in database having a VARCHAR2(1) field named IsActive with value 'Y' or 'N' , I need to display this field as select boolean check box in the JSF page
using ADF Entity Object and ViewObject. We have followed the following method for displaying this field as select boolean check box.
1. Changed the datatype of the IsActive field in the Entity Object as Boolean and the database column type as Varchar2(10)
2. we have edited the query using case when IsActive='Y' then 1 else 0 end .
3.and converted the IsActive inputtext to select boolean checkbox.
Thus we where able to display this field as select boolean check box but the problem is that we where not able to insert the data as 'Y' or 'N' using this method.
Please help us whether the method we are following is correct or is there any other method to insert and display the similar fields like IsActive as select boolean check box in ADF
Thanks in Advance
Anitha

Anitha,
Create a transient boolean attribute on your EO. Write the getter to return true/false if the real attribute is Y/N. Write the setter to do the converse. Bind the transient attribute to the checkbox.
John

SharePoint 2010 Slide Library Unable To Select Managed Metadata When Publishing.

Hello,
I'm running into some problems with Managed Metadata when uploading (publishing) slides in a SharePoint 2010 Slide Library. If I have Managed Metadata Site Columns that are set to be required in my slide library, and I publish my slide(s) into the
SharePoint 2010 Slide Library I'm not prompted to enter in my required Metadata before the slide is published. The slide will upload, but then I would need to edit the slide and then enter in the required Metadata.
If I create a new column with a type set to Choice for example, and set it to be required and I upload (publish) a slide I'm now prompted to enter in the required Metadata, but all the Managed Metadata choices are grayed out and I'm unable to select anything.
I'm able to select a Choice for the new column.
Is this a bug within SharePoint 2010 that does not allow me to enter in Required Managed Metadata Tags on uploading (publishing) slides?
Regular document libraries work just fine with required Managed Metadata.
Thanks for any assistance.
v/r
JShidell
v/r JShidell

Hi,
According to your post, my understanding is that the Managed Metadata not prompted to enter value in the required metadata.
I had tested with this issue, and I found the same issue.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to create checkbox in mail content

Hello,
I have created a program to send mail. The requirement is to write some text in mail content along with pdf.
The issue I am facing is that the mail content(body) should contain check boxes.
At present the mail body fetches all text from SO10 standard text. I have tried inserting symbol in SO10 ( SAP-SYMBOLS ) but the out displays <697>,, instead of checkbox in mail.
How should I create checkbox that are displayed in mail body.?
<removed by moderator>
Edited by: Thomas Zloch on Aug 10, 2011 12:01 PM

go to the standard text > change editor > select PC editor
now you can put an HTML TAG
<br>
<input type="checkbox" name="option1" value="Milk"> Milk
<br>
I can see the check box in SAP, but not in OUTLOOK... not sure whether we an issue with SAP or OUTLOOK or we entirely look in different way..

Unable to select Edit in Adobe PDF Portfolio?

I'm using Adobe XI with flash player 11.7.700.202, which I believe is the current version, and I'm unable to select the 'Edit' button as it appears that it's been disabled. Please direct me to a solution.
Note: it worked just fine in Adobe Pro 9.
-Tammy

The portfolios are created through Outlook (sync'd from Gmail for multiple printing) using Adobe XI Pro so your comment above answers part of this question.
We had created portfolios using Lotus Notes and Adobe Pro 9; I was able edit the 'Description' when I had to print specific emails and I was even able to change how the emails were displayed (layout).
Can you tell me if there will be a fix/update for this?
-Tammy

Unable to select logical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1

Hi Team,
I can not select logical and physical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1 (Java SDK 1.8). DataModeler does not allow me to select them. I mean the next scenario: I create two entities (or tables) and add a logical (or physical) relation between them. After this I can not select the relation in diagram window. Meantime I still can select the relation in browser window.
Could you please suggest me is it a bug (maybe a platform specific problem) or did I miss something in software options?
I found a topic about the same issue. It describes the same problem, though the topic is without an answer and was archived.
New bug - Unable to select logical relations in version 4.0.2.15 Build 15.21 on Mac
At the end, if this is a bug (even a platform specific one), where may I publish details about it to ask for a fix from Oracle team someday in future?
WIth best regards,
Kostyantyn

Hi Philip,
Thank you for the good hint about "default line width and colour".
Meantime the option does not resolve the problem in my case.
According to your suggestion I set maximal width for relation lines and I still can not pick (select) it in diagram window.
I checked behaviour of DataModeler with next display resolutions on MacBook Pro (Retina, 15-inch, Mid 2014) in System preferences Displays: "Best for display"; Scaled "More Space", "Larger Text", and "Best (Retina)"... And the problem takes place in all these cases.
Please see attached image - this is how I see the relation line. And I still can hit it!
If I use the DataModler on a casual external monitor, the problem is absent (no matter what a width is). Also I believe the problem takes place only on mac retina displays. Therefore I think this is a platform specific bug.
I do understand a root cause of the problem may have no direct relation with Oracle DataModeler source code.
With best regards,
Kostyantyn

Unable to select Certificate for Remote Desktop Connection

Hi,
I have created a certificate with below parameter in inf file through a local Standalone 2008 r2 CA & imported it into Computer personal certificate store but unable to see this certificate entry while trying to select it under Remote desktop connection.
Somewhere saw we should have the private key in personal certificate store but didn't get how/where to get that key. Is that the reason, m unable to select this certificate or there is something missing in the input parameter used in inf file. Kindly suggest
what could be the problem.
[NewRequest]
Subject="CN=Server.Domain.com"
Exportable=TRUE
KeyLength=2048
KeySpec=1
KeyUsage=0xf0
MachineKeySet=TRUE
[EnhancedKeyUsageExtension]
OID=1.3.6.1.5.5.7.3.1
OID=1.3.6.1.5.5.7.3.2
OID=1.3.6.1.4.1.311.54.1.2
Regards,
Dhiraj

Hi,
Problem is resolved now. i have done below two changes.
--> used KeyUsage=0xA0 in inf file.
--> imported certificate through certreq -accept. Earlier i was importing cert from mmc.
I think second point resolved my problem. i even didn't think that mmc & command can make this difference.
Dhiraj

Multiple checkbox are to be checked when selecting one checkbox in formlayo

Hi,
I created the checkbox in apex 4.0, as LOV(list of value), I want to select multiple checkbox at a time ,when by selecting one checkbox among them.......

Hey,
try using APEX_ITEM.CHECKBOX.

Unable to select Create checkbox

Similar Messages

Maybe you are looking for