Unable to send email POP3 email from Outlook 2013 unless signed on as local admin

Windows 7 Outlook 2013
I recently upgraded from Office 2010 to 2013. For several weeks everything ran smoothly but a few days ago I noticed that my Verizon POP3 account was unable to send mail - items just sit in outbox. I have deleted/added the account and the profile
multiple times, this will solve the problem for a few days but then it returns again. I discovered that if I run Outlook as an administrator the mail will send without a problem. I have checked permissions on the pst file and do not see any issues.
Sometimes but not always I receive a message on the POP3 send that there was no network connection check mode. The send test message in the account set up never has a problem - it's only the periodic Outlook sending and receiving when the problem occurs.
Any ideas?
Thanks.
enagy

Hi,
Since the problem could be be solved for a few days by deleting/re-adding the profile and the account, the problem may be related to the .pst file. When the problem comes back, run Scanpst.exe to repair the. pst file, will the problem be fixed again?
Learn how to use Scanpst.exe:http://support.microsoft.com/kb/272227/en-us
We can also assume there are other programs that are interacting with the .pst file, reboot and disable the possible programs to test if this makes a difference.
If you're disconnected, you'll also need to check the network cable, try restarting your computer, or contact your Internet Service Provider or your system administrator. This implies the issue may be related to the anti-virus program or the firewall settings,
which may be scanning the outgoing emails from Outlook. We can disable them temporarily to send the emails again, check if this helps.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

Unable to send and receive email for external domain

Hi,
I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server.
I also did nslookup. Results mentioned below:
C:\Users\Administrator>nslookup www.google.com
Server: localhost
Address: ::1
Non-authoritative answer:
Name:    www.google.com
Addresses: 2404:6800:4009:802::1014
          74.125.236.145
          74.125.236.148
          74.125.236.146
          74.125.236.144
          74.125.236.147
C:\Users\Administrator>nslookup www.microsoft.com
Server: localhost
Address: ::1
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to localhost timed-out
Any help would be much appreciated!

Hi hg01,
According to your description, I notice that you installed Exchange server on a DC.
It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
Last, try to configure both Send Connector and Receive Connector.
More detailed error message will be helpful for the further troubleshooting.
Thanks

Am unable to send photos by email or message

Unable to send photos by email or message

Hi,
Ok, adding your email address to my contact list didn't change anything.
The good news is that your email from your gmail account did get through. It was marked as junk mail but when I declared it safe, the photo appeared.
I looked into the message content for the ones that didn't work and I think the photo is actually still part of the data. It is as though the message header has been corrupted somehow. Since it happens with your service provider but not mine, it suggests that your service provider is perhaps corrupting the header.
I'm not sure how we can get this resolved as the fault could be with Adobe, your service provider or other service providers.
I think the workaround of using your gmail account is probably the best way to go.
You do get a lot of snow there. I live in the UK on the south coast near Southampton. All I have seen is a very light dusting of snow and that quickly disappeared. There were a few local accidents due to the icy conditions. I supposed that the snow is part of your life there - for us it is an exception and so we are not prepared for it.
Brian

Unable to send or receive email

We purchased an iPad with Retina display in Nov 2012, since we bought it, we have had issues with email. We are now unable to send or receive email from Microsoft Exchange server on the ipad. The email locks up when trying to open or send. It has gotten progressively worse. At first couldn't open more than 8 different emails before it locked up, now we can't send or receive any emails. Please help!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Unable to send or receive emails on my blackberry curve 9320

Hi, for the last 2 days i have unable to send or receive emails on my phone, i have contacted vodafone and they have not been able to help. I would also like to add that when i click on OPTIONS - SECURITY - SECURITY STATUS INFORMATION my 4 email accounts show up, could this be the problem, please help if you have a soloution.
Kind Regards
Solved!
Go to Solution.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support...consider that you pay them for your services and formal support, and right now they seem to not be delivering either to you. They even have the power to escalate your case formally up to BlackBerry if they cannot resolve it, but you need to not allow them to fob you off with things like "it looks good on our end"...they are responsible for delivering services to you, you pay them for that.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Email delivery failed. unable to send and receive email for da device 9780 bold

Hellow, I m using
BlackBerry® 9780
smartphone (3G, Wi-Fi)
6.0 Bundle 863 (v6.0.0.285, Platform 6.5.0.54)
3G Bands 1,2,5,6
Cryptographic Kernel v3.8.6.5
Branding Version: 1.0.99.538J
Micro Edition Configuration: CLDC-1.1
Micro Edition Profile: MIDP-2.1
Micro Edition JTWI Version: 1.0
Micro Edition Media Version: 1.1
Micro Edition PIM Version: 1.0
Micro Edition File Version: 1.0
Micro Edition Bluetooth Version: 1.1
Micro Edition Location Version: 1.0.1
Micro Edition Security and Trust Services (APDU) Version: 1.0
WLAN Version: 4.2.1.40
www.blackberry.com
Now the problem is I have my email {REMOVED} associated with this device. But I m unable to send receive the email
There is an error I get like delivery faliure please resolve meh and assist me
Mod Edit: Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
divyaan wrote:
There is an error I get like delivery faliure please resolve meh and assist me
Sadly, from "like", we can't really understand the error message you are receiving...exact and complete content of any errors presented are always better to help us understand rather than vague hints and such.
In any event, I recommend this. With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SAP Inbound email related query (from Outlook to SAP)

Hi,
I am in a situation where I have to send email from MS Outlook to SAP with a PDF file as an attachment. The PDF file will be stripped into an XML file and processed further and a reply is sent to the user sending the email. The Outlook admins have set up the necessary config for the connectivity - I am able to send the PDF file from Outlook to SAP (everything has been configured using SICF, SCOT etc) for inbound processing. In SCOT - Settings->Inbound processing I have used a Class which implements interface IF_INBOUND_EXIT_BCS (as per one of the blogs by Jeff Gebo). I can see the trace file in SCOT ->Utilities->Trace->Internal trace. When I send the PDF file, I can see in the trace (I cannot debug as the SAPCONNECT user which gets called in the backgound triggers the user exit class). In the trace file I can see my class gets instantiated but the next step to read the PDF file fails. The code come the Jeff's blog which I use is as follows:
Set return code so that no other Inbound Exist class will be called
e_retcode = IF_INBOUND_EXIT_BCS=>gc_terminate.
try.
Get the email document that was sent.
data: document type ref to if_document_bcs.
document = io_sreq->get_document( ).
Get the sender's address to reply back
lv_sender = io_sreq->get_sender( ).
addr = lv_sender->address_string( ).
return_addr = addr.
Get the interactive form attachment.
data: pdf_table type BCSS_DBPC.
pdf_table = document->get_body_part_content( 2 ).
Convert the pdf table into an xstring.
data: pdf_xstring type xstring,
pdf_line type solix.
clear pdf_xstring.
loop at pdf_table-cont_hex into pdf_line.
concatenate pdf_xstring pdf_line-line into pdf_xstring in byte mode.
endloop.
Process the PDF form
data: formxml type string.
formxml = me->process_form( pdf = pdf_xstring ).
Here the contents of the pdf_table-cont_hex is blank (I used a table to populate the values). All I get in my Outlook inbox is a empty email with an empty subject from SAP (called by the instantiated class of the Interface)
The irony is that I setup the same procedure has been configured and setup in another totally different SAP system and everything works fine there - I did a comparision of both SAP systems and everything seems fine (config wise and user exit class wise) and everything is identical. I have no clue as to why it works in one system and not in the other system.
If anyone has any pointers wit will be greatly appreciated as I am on a tight deadline - I have checked OSS but with no help.
Thanks in advance,
Ryan

You may be able to find more information by putting an infinite loop at the beginning of your user exit:
x = ' '.
while x = ' '.
x = ' '.
endwhile.
and then go into debugging via SM50 and set the x variable to break out of the loop.
This technique is useful debugging workflows and other code which you cannot get to directly by placing a break-point.
Andrew

Why i couldn't open email that sent from Outlook?

                 Please help me for this matter, i had bought my BB Curve 8520 for just only 5 days and use latest firmware. I have setup 2 emails 1.) hotmail 2.) Outlook (Official mail) i found this issue after i had setup my office email for a few days.
                Issue is when i open email that sent from Outlook (Official mail) that contained file .png or attached with file .png by using HTML my bb couldn't open it, it will stuck but i can use any function but just the email that didn't open.
                I ha contacted with my Local support, they inform me to do the hard reset, after i had hard reset it working fine with same email that couldn't open previously. After one day had past it has the same issue again.
Please help me to fixed this issue, thank you in advance.
P.S. I had never install any unauthorized program.

Photoshop doesn't do anything special or different when a file is sent from an attachment. However, when you send an attachment from Outlook to Photoshop, that file is actually downloaded to your computer in a Temp folder before it is sent to Photoshop. Often times the permissions on this folder can be such that it prevents access. Other than that, all Outlook does is simply drop the file onto the Photoshop app file. The only thing that would involve Photoshop directly is if there are some damaged files involved with its connection to the rest of the system. If this is the case a reinstall would fix it. Otherwise, check the permissions on the Outlook temp folder (or at least the JPEG file it is trying to save).

Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

Hotmail has been discontinued for some time now. See:
http://windows.microsoft.com/en-us/windows/outlook/auto-upgrade-outlook-faq

Unable to send PDFs as email attachments

I have become unable to send PDFs as email attachments when using Firefox.
Depending on the PDF, I either get the message “There was an error opening this document. The file is damaged and could not be repaired.” or it opens as a blank document. This occus when opening the file with both Adobe Reader and Acrobat Pro. The problem seems to be isolated to PDFs. (I am able to send Word files. If a PDF is zipped before attaching, it can be opened without problem.) This occurs on both an institutional email account and personal (Yahoo) email account. This problem is isolated to Firefox (does not happen in Chrome).
I have reset Firefox to default settings, as well as reinstalling.
Thank you.

Update Adobe® Acrobat® Plug-in for Web Browsers, Version 10.1.13 to version 11.
Also please update all of your plugins and try again.
Does this happen when you open the pdf in pdf.js, it is possible to change the default viewer by:
* [[How to disable the built-in PDF viewer and use another viewer]]

Unable to send or recieve emails

I am unable to send or recieve emails on my iphone.

I turned off my phone and turned it back on and it seems to be working now.

How do I convert emails to PDF from Outlook to make a file on the PC?

how do I convert emails to PDF from Outlook to make a file on the PC

It is always tough for anyone when we need to save our emails into one file for future reference. You could either do it manually or can use a simple tool to Convert all your messages into one pdf file . This Single pdf file can be used if we need to read any past email. you can easily convert oulook to pdf in no time. If you are converting several email messages, you can either save them as separate files with initial layout fully intact or combine them into one big PDF document.

Unable to send iPhoto by email since changing email P/W

unable to send iPhotos by email since changing email P/W

What version of iPhoto and system are you using? Are you using iPhoto as the email client or are you going thru Mail?
Go to iPhoto's Accounts preference pane and delete the email account. Close iPhoto, reboot, relaunch iPhoto and add the email account back.

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others.

Unable to send photo through email using iphoto theme (designs)

Unable to send photo through email using iPhoto theme (designs) using the SHARE button.
Error message:
Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.

Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.
Are you using Yosemite and not apple's Mail app? Then you may need to set up an app-specific password: See the post below:
Re: I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!in response to Gary Kissler
This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope)

Unable to send email POP3 email from Outlook 2013 unless signed on as local admin

Similar Messages

Maybe you are looking for