Unable to send two person sms at one time in ios 8.1.3

if i send one person at one time so it easily sent but when i send two persons in a new message box so it say message sending failed
either i if i send them same message separately so is sent.???
Can you check what is the issue .?
i am having this issue when i have updated it to 8.1.3..

Hi shezi007,
Thank you for contributing to the Apple Support Communities.
It sounds like you're not able to send a group text message on your iPhone.
You can find many good troubleshooting tips that can help the situation at this link:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
I recommend starting with these tips:
Go to Settings > Messages and make sure that iMessage, Send as SMS, or MMS Messaging is turned on (whichever method you're trying to use).
If you can't send messages to a certain recipient, delete any conversations you have with them and try sending a new message. When you delete a conversation, you won’t be able to recover it. Make sure that you take a screenshot or forward any messages that you want to keep.
If you can't send or receive SMS or MMS messages, contact your carrier to check your text messaging plan.
Sincerely,
Jeremy

Similar Messages

I upgraded my iphone to 5.0.1 and ever since, it has decided to delete old text messages. Only with one contact though, not everybody. So for every new text message I send this person, an old one gets removed. Why? I don't want this to happen.

I upgraded my iphone to 5.0.1 and ever since, it has decided to delete old text messages. Only with one contact though, not everybody. So for every new text message I send this person, an old one gets removed. Why? I don't want this to happen.

Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it.

Sending multiple request approval at one time

Hi,
Im working on a senario thats sending multiple request approvel at one time with HWC application. For example , client approves one request and it approves multiple requests at one time as well. Is it possible make this with HWC ?
Thanks in advance.

If you have a list key, it'll have child MessageValueCollection keys (specifically, the value of that list key will be an array of MessageValueCollection objects). Each MessageValueCollection has a state, "add", "update", "delete" or empty. By specifying mappings between list key actions and MBO operations, or by doing so manually in the WorkflowClient.xml, you can specify which MBO operation will be invoked for each "add" MessageValueCollection, which MBO operation will be invoked for each "update" MessageValueCollection and each "delete" MessageValueCollection when the message is submitted to the server via an Online Request or Submit Workflow, where it will loop through the MessageValueCollections and execute the appropriate MBO operation for each.
In the tooling, you can do this by having a listview bound to that list key and having subsequent screens that invoke Add/Update/Delete List Key Collection menuitems. In that scenario, when you update the rows in the listview, the effects don't occur immediately, but rather wait until you submit them as a batched operation, which will behave as described above.

I have an IPad Model number A1475. I want to search all emails from one certain sender, Mark them all at one time without doing each one individually, and then delete them all at one push of a button. How do I do this?

I have an IPad Model A1475. I want search all emails from a certain sender, Mark them all at one time and delete them at one time. How do I do this?

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

I am unable to send emails to more than one person in the to: on my emails

I seem to be unable to send an email to more than one person at a time. can do on i pad and i phone but not on mac book pro. any advice? If I want to do two people i can do one in the to: and one in the copy:.

Ok, now, typically, it's mysteriously working. No idea if what I was doing caused it. Set up the account as a POP one using my work outgoing server instead of mail.me.com, discovered that the phone automatically removed all my outgoing mail servers, right after I'd activated them all, so went back and reactivated. Sent email successfully. Created another account as IMAP but everything else the same, and now it suddenly works.
This has happened to me several times in the past.

Unable to send or receive sms from non iPhone users

I am unable to send or receive text messages from non iPhone users.
I can get and send MMS but no SMS... I have an iPhone 6 +

Hey pbaldridge,
Sorry to hear you are having issues with the messaging on your iPhone. If you continue to have issues sending SMS messages to non-iPhone users from your iPhone, you may find the information and troubleshooting steps outlined in the following article helpful:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Cheers,
- Brenden

When Two person print at on time,error happened.

Hello:
   The code: (S_NUMBER is sequence number)
   SELECT
    FROM <table>
    INTO TABLE ITAB
    SORT ITAB BY ZNUMBER.
    LOOP AT ITAB.
        S_NUMBER = ITAB-ZNUMBER.
    ENDLOOP.
    WA-ZNUMBER = S_NUMBER + 1.
    WA-ZNAME = NAME.
    WA-ZUSER_ID = ID.
    CONCATENATE SY-DATUM SY-UZEIT INTO PTIME.
    WA-ZTIME = PTIME.
    INSERT INTO <table> VALUES WA.
   When two person print different documents at one time.the printer work automatic,but S_NUMBER is same,and can not insert the wa into the table.
Hope someone can give me some helps.
Regards&Thanks
zagory

Hi zagory,
In your program you may need to lock your table when you update the record and unlock it back so that the database entries remain consistent.
See http://help.sap.com/saphelp_nw04/helpdata/en/41/7af4c8a79e11d1950f0000e82de14a/content.htm for SAP Locking example.
Regards,
Wenceslaus.

Two Mac computer in one Time Machine ? Possible?

Hi
Does anyone know that can I back up two computers in one Time Machine External HD? I have one Imac (PPC) and one MAcbook (intel). For both of them I'd like to make one Time machine HD. Does it work like that or do I need to back up two seperate TM HD for each of my computers?
Many thanks...

tur,
There are multiple options for backing up 2 machines to one external drive. Remember that Time Machine is smart enough to recognize different machines and stores the backups in different folders.
1: Connect your external drive to your main machine and then use Personal File Sharing to share that drive on your network. Keep in mind sharing the drive over the network will degrade network speed while Time Machine is working (Not such a big deal if you use a wired network).
2: (The option I use) Run Time Machine on the first computer, eject it the drive, and then plug it onto the second machine and run time machine on that computer.
I use option 2 because I have a machine I use as a media center and do not need regular backups of. I only back it up when I add files.
A third option I have not had any experience with is using Apple's new Time Capsule.
I hope this answers your question.

How can I Connecticut two Airport Express with One Time Capsula?

Only by Wifi or by LAN in a row?

What are you trying to accomplish with the AirPort Express devices?
Where will the Express devices be located in relation to the Time Capsule?
If you are planning to use the Express devices to "extend" the wireless range of your network, Ethernet LAN will always provide far better performance than trying to connect the Express devices using wireless only.
You have the option of connecting both AirPort Express devices directly back to two LAN <-> ports on the Time Capsule....or....connecting one Express back to the Time Capsule and then connecting the second Express to the first Express using Ethernet. This assumes that you have a "new" Express with both WAN and LAN ports.
If you choose wireless only, both Express devices will connect back directly to the Time Capsule, so both of them should be located where they can receive a strong signal from the Time Capsule wireless.
A "hybrid" approach can also work. Connect one Express to the Time Capsule using an Ethernet cable and then setup the second Express to connect to the first Express using wireless only.

Unable to send text and play music after upgrading to IOS 6.1

After upgrading to IOS 6.1, I am having problems sending text messages (sms) to several of the contacts to whom I was able to send text earlier. Also all the songs I have downloaded previously from iStore have all stopped playing. Being a new IPhone convert I am seriously regretting why I got rid of my Blackberry

I can understand how you are upset, MJ406. I want to make sure that we do everything we can to get the text messages up and running with out any kind of problems.
When you are trying to send these text messages out are you connected to Wi-Fi or the cell network? If you are connected to wi-fi please do me a favor and turn of the wi-fi, try to send a text to see if it goes out without any kind of issues. Then go into Settings, Application Manager, Slide the screen to the ALL section, Scroll to Messaging and perform a force stop, clear cache, and clear data. Once that is done, power the device off and then turn back on. Once it is back up and running you can turn the wi-fi back on (if you had to turn it off) and retry sending a text message again.
Please keep us posted.
Kevin_VZW
Follow us on Twitter @VZWSupport

Unable to join two fact tables via one common dimension in RPD(Repository)

I have created two fact tables F1 & F2 and one dimension D.
F1 is joined to D and F2 is also joined to D in Physical layer as well as in BMM layer.
I created one report in OBI Answers using these three tables.It Showed me the following error.
**Error Details**
**Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P**
**State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table dfghdfh) does not contain mapping for [Dashboard_Fact.Period_Sgt_Key]. (HY000)**
**SQL Issued: SELECT dfghdfh.Period_Sgt_Key saw_0, "Period Dim".Period_Sgt_Key saw_1, Dashboard_Fact.Period_Sgt_Key saw_2 FROM service_delivery ORDER BY saw_0, saw_1, saw_2**
How to cope up with the issue or can anyone tell me the alternate workaround for this?

That is what i have tried.
I have made a logical table TEST and dragged two fact tables f1 & f2 in source.
Now when i drag different columns from different fact tables(that are in TEST logical table) in report, it gives an error and not making any joins that you are mentioning.
ERROR MESSAGE:--
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Test) does not contain mapping for [Test.SurveyName_Id, Test.SurveyHead_Id, Test.Respondent_Id, Test.SDBusiness_Area_Id, Test.Period_Sgt_Key, Test.OBS_Id, Test.VOCBusiness_Area_Id, Test.Question_Sgt_Key]. (HY000)
The columns mentioned in the error message are all from test logical table..some are from F1 & some from F2.

Unable to send a text message to one of my contacts

I am using this iphone as an ipod touch until I can switch to att for a cell carrier. So, I want to send a msg to a contact but it shows it green and wont send. any odeas

Hello mmurray550,
Thanks for using Apple Support Communities.
According to a previous Support Communities thread marked as solved, green phone numbers are numbers not registered with iMessage, and would thus be SMS only. Since you're using an iPod touch, it does not have SMS capability, and therefore cannot send a message to that number.
What is the difference between blue and...: Apple Support Communities
https://discussions.apple.com/thread/4457898
Take care,
Alex H.

Send two signals at the same time to serial

Hi
I have a problem in that I want to control some relay boards by serial. The boards have an address byte (to determine which of the three relay boards) and a relay combination (four relays on each board). The .vi I will need to make will be sending data to the serial as a result of feedback from sensors (they are currently simply controlled by timers to simulate) so there is a good chance that there will be two relay addresses sent at the same time and consequently much confusion. The timed simulation demonstrates this possibility by switching all relays on at the start.
Is there a way of avoiding this? Any help would be much appreciated.
Many thanks
Alastair

Alastair,
When you say send to multiple boards "at the same time" exactly what to you mean? On a serial port only one byte at a time can be sent. You do not specify how many bytes are sent to each board to handle the addressing, the data, and any EOT (End of Transmission) characters.
I can think of two possibilities.
1. Relays are slow. If the transmission rate is fast enough, you could send messages to all relays sequentially over the serial port but still have the appearance of simultaneous activation of the relays. If the relays switch in 10 ms and each command contains 6 bytes, sending the data at 115 kilobaud would take about 1.5 ms for three boards. This would likely be close enough to simultaneous for relays.
2. Add a command similar to the GPIB GET (Group Execute Trigger). All devices on the bus respond to this command by executing a previously stored command. No addressing is used for this command. This does require that the relay boards be modified to respond to their address and to the common or group address and to store a command for later execution.
Lynn

II've been looking for an app that allows me to send over 150 sms at a time. so far, all group apps that i've tried send the texts but not to all recepients. any ideas how to fix this?

I have downloaded and tried a few group message apps to send sms text to over 150 group contacts. i created a group and have tried a few apps, but for some unknown reason the texts aren't received by all recipients. any idea how to deal with this?

I have downloaded and tried a few group message apps to send sms text to over 150 group contacts. i created a group and have tried a few apps, but for some unknown reason the texts aren't received by all recipients. any idea how to deal with this?

Unable to use two wireless devices at same time

Unable to connect an HP Laserjet 1320 thru the JetDirect ew2400 External Print Server to an imac G5 that uses the 2WIRE352 (wireless) modem for ISP access thru ATT. Either the ISP is connected and printer does not work, or the printer works but no internet access. HP Tech Spt (after 1hr 15 min.) said I need to change/access the "infrastructure" in the OSX. Is that correct? & if so, how do I do this? Do I need to hire Apple Tech Support to do this? How much will that cost. I'm ready to send the Print Server back to HP for a refund.

Infrastructure mode means the print server joins the router's local network instead of having a separate computer-to-print server (called ad hoc mode) network. I think you need to read the print server manual on how to do that.

Unable to send two person sms at one time in ios 8.1.3

Similar Messages

Maybe you are looking for