Unable to set colour "selection" in tables

Hi please advise.
In any of the tables, I should be able to set color on any cells but  I am not able to. In the end I have to double click to make cells colored.
It goes like this, whichever tables, I clicked, the other tables will show colored cells but the table which I clicked, do not show colour. Only it works by double click.
Here ia my attached.
I am using LV7.1
regards
Clement
Attachments:
test_selectioncell_tables.vi ‏193 KB

Hi  Thanks.
It works well until I add the function of context menu and mouse down?. It does not work.
I revamped it to simplfy and narrow the problem. Only clicking on the table control tbl_serialno does not register the change in the selected cellI and the selected color does not appear in the selected cell but other.
I used the context menu for the right click in order to acquire the serial number and clicking on it, will direct me to where there will be more details for this number
I  am puzzled. Please advise.
Here is the attached. I am using labview 7.1
regards
Clement
Attachments:
test_selectioncell_tables2.llb ‏219 KB

Similar Messages

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

  • Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

    hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

    Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
    that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
    If that is an accurate description of the problem, consider this:
    Image 1: The original image
    Image 2: Edit > Fill with the Blending mode set to Color. White remains white
    Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
    (I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

  • Unable to get the selected from table when AM Pooling is disabled

    Hi,
    I have created a EO and VO for EMPLOYEE table and dragged on to pagefragment as ADF table. RowSelection property is set as Single.
    It is displaying the data in the table. I have written below method which should be invoked on selection of a row.
    It should give the Firstname and LastName column values of the selected row.
    public void onSelectTable(SelectionEvent selectionEvent)
    RowKeySet selectedEmps = getEmpTable().getSelectedRowKeys();
    Iterator selectedEmpIter = selectedEmps.iterator();
    DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding empIter = bindings.findIteratorBinding("EmployeeVOIterator");
    RowSetIterator empRSIter = empIter.getRowSetIterator();
    while(selectedEmpIter.hasNext()){
    Key key = (Key)((List)selectedEmpIter.next()).get(0);
    Row selRow = empRSIter.getRow(key);
    String firstName = selRow.getAttribute("FirstName").toString();
    String lastName = selRow.getAttribute("LastName").toString();
    This method is working fine.
    But I have disabled the Application Module Pooling and tried in local machine(AM Configuration -> Pooling and Scalability -> Uncheck Enable Application Module Pooling).
    Then it is not workinng. it is returning null to selRow. Ideally it should work.
    Can any one pls suggest why it is not working when Application Module Pooling is disabled?
    Regards,
    Vinod

    Which jdve version do you use?
    What is the whole use case?
    I don't understand why you make it so complicated when the framework gives you what you like fro free. If you leave the selectionListener like it was when you dropped the table onto the page the framework handles the selection for you. If you like the name and first name of hte selected row you can drag the name, firstname from the VO onto the table (even if you don't want to see it, dorp it an e.g. inputText) and drop it onto the page. This will create the needed binding for you in the pagedef file. as you don't want to see the inputtext components switch into source mode for the page and remove the components. Removing components in source mode will keep the bindings, whereas if you remove them in design mode the bindings are removed too.
    Now, if you select a row in the table, the attributes for name, firstname automatically getting the correct values assigned.
    If you like to get to them from a mangaed bean you should read http://www.oracle.com/technetwork/developer-tools/adf/learnmore/23-generic-table-selection-listener-169162.pdf which shows you how to first use the default selectionListener and then do something else with the row (if you like).
    Timo

  • Unable to revoke "select any table" system priv

    I created a new user and unable to revoke select any table permissions. It appears that any new oracle user i create has the select any table permissions. I want to only alow this new user to select from 5 tables and not others. It seems as though there is a global setting on the database to allow select from any table. I can't change that if thats the case but i would like to create this restricted user.
    How can I modify permissions on my new oracle user to not allow select any table?
    Any help would be appreciated

    My thanks again to all that took the time to post!
    I ran those statements and the select that Aman had posted. The output surprised me and probably will lead to identifying the problem.
    As you can see below the SELECT ANY TABLE privilege is under the sessioni_privs. however im also confused why the "revoke select any table from ITEAMS;" didnt work. here is the output from the suggestions in your posts.
    SQL> connect iteams
    Enter password:
    Connected.
    SQL> show user
    USER is "ITEAMS"
    SQL> select * from dba_sys_privs where grantee = 'ITEAMS';
    GRANTEE PRIVILEGE ADM
    ITEAMS CREATE SESSION NO
    SQL> select * from session_privs;
    PRIVILEGE
    CREATE SESSION
    UNLIMITED TABLESPACE
    SELECT ANY TABLE
    SQL> connect sys as sysdba
    Enter password:
    Connected.
    SQL> show user
    USER is "SYS"
    SQL> revoke select any table from ITEAMS;
    revoke select any table from ITEAMS
    ERROR at line 1:
    ORA-01952: system privileges not granted to 'ITEAMS'
    SQL> select * from user_tab_privs_made where grantee='ITEAMS';
    no rows selected
    So if the SELECT ANY TABLE is within the session_privs as seen above. How can i reovke that priv?

  • When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
    Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
    Good luck.
    Russ

  • Setting Column selection on transposed table

    Hi,
    I have a problem with a jTable I am using in a program. The table has a rotate feature which works correctly. To do this I am reversing the getColCount() and getRowCount() methods within a seperate tableModel and setting this model on the table when the user clicks rotate (table headers are dealt with seperately, don't relate to problem).
    This all works fine but when I select something within the rotated table I want the column to highlight. I thought that using setRowSelectionAllowed(false), and setColumnSelectionAllowed(true) would give me the desired result but it doesn't.
    I can perform this on the table when it is not rotated, but when I rotate the jTable it ignores any properties about selection I have provided.The code is listed below:
    //Method called on button click to rotate table
    public static void transpose(JTable pTable, JTable pTableFixed, JScrollPane pScrollPane){
            //if table is not transposed apply transposed tableModel
             if(transposed == false){
                 pTable.setModel(ahkTableModel.getTranposeModel(pTable)
                      pTable.setRowSelectionAllowed(false);//won't apply call
                      pTable.setColumnSelectionAllowed(true);//won't apply call
                 pTable.setRowHeight(0,1); // hide row
                 pTableFixed.setVisible(false); //hide fixed table from non- rotated table
                  //Add new row headers  table to rotated table
                  JTable rowHeaders = new JTable(new String[][]{{"sample_number"},{"status"},{"ref"},{"comment"}},new String[]{"Lot"});
                  rowHeaders.setEnabled(false);
                  rowHeaders.setRowHeight(17);
                  rowHeaders.setRowHeight(0,1);
                  rowHeaders.setBackground(new Color(238,238,238));
                  transposed = true;
    //Apply cell renderer to each column
                       for(int i = 0;i< pTable.getColumnCount();i++){
                            TableColumn col = pTable.getColumnModel().getColumn(i);
                            col.setCellRenderer(new TableImageRenderer(true));
    //apply table properties method to position on scrollPane
                   ahkTableModel.setTableProperties(pScrollPane, pTable,rowHeaders);
              //reverse procedure if table is rotated and user wants to rotate back     
             } else{
                 boolean[] baEditableColumns = {false, false, true, true};
                 pTableFixed.setVisible(true);
    //set original model on table again
                 pTable.setModel(ahkTableModel.getTableModel(0,baEditableColumns));
                 transposed = false;
                  setColumnProperties(pTable,pTableFixed, pScrollPane);
         }Thanks for your assistance.
    Alan

    Any Ideas at all guys?? Really stumped with this problem there just doesn't seem an obvious explanation.
    Thanks.
    Alan

  • Can we enable "Select record Set Message choice" of Table in left side

    Hi ,
    I have requirement to set the "Select Record Set " Message choice of a table region on left side.
    Ex:If there are more records in a table region and message choice available to select next set of records.
    You can chk in Workflow Status Monitor function.
    Its the Navigation Bar to be @ left side on the table Region whcih allows you to navigate the records set.
    Thanks,Sarath.
    Edited by: SarathL on Dec 13, 2011 4:59 PM

    Hi,
    Not sure what exactly you are looking for.
    The Next link and option to select next set of rows comes to your OA Table by default .. isn't it?
    -Idris

  • Unable to set default table attributes in Keynote

    I've been trying to change the default table attributes in one of my themes, and as per the description in the Keynote manual (page 237-8), this should be a straightforward process:
    1) In the slide navigator, create a new slide.
    2) If you're setting up default attributes for a particular master slide (rather than all the masters in the current theme), click Masters in the toolbar and choose the master slide. [I want to change the table attributes in all master slides in the particular theme, I skip this step.)
    3) Place a table on the slide.
    4) Select the table and set its attributes.
    5) Do one of the following: To make the table the default for only the current master slide, choose Format>Advanced>Define Table for Current Master. To make the table the default for all masters slides in the current theme, choose Format>Advanced>Define Table for All Masters.
    6) If you don't want the table on the slide, delete the table.
    Step 1) through 4) is unproblematic, but the second I try to execute step 5), the new formatting is all mixed up, and I am left with a table that looks nothing like the one I have just created in step 4). (Choosing to make the new table layout valid only in the current master doesn't help.)
    Any thoughts on how to sort this out would be greatly appreciated!  I should mention that following a similar procedure for diagrams works like a dream.

    Hi!
              We have same problem!
             The layout can be selected in application, but it is not taken as default.
         We appreciate your feedback
    Best Regards.
    Angelica

  • Unable to set count for Select Query for BizTalk SQL receive port

    Hi All,
    Iam using BizTalk server 2009 classic SLQ adapter (using XML clause)for my integration to pull records from DB in to my application.
    As per the DB values iam unable to set the record count as this started giving me error below (first it worked for 820 records with select Query.and then 400 and going down with respect to multiple runs).Kindly help .
    Thanks in advance.

    Hi Abhishek,
    iam still getting the same error for 1000 records.
    after turning off PreserveBOM aswell in send pipeline.
    There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "Pipeline " Receive Port:
    "SQLPort" URI: "SQL://XXXXX/OneC_DB/" Reason: An error occurred when parsing the incoming document: "'
    ', hexadecimal value 0x0B, is an invalid character. Line 188, position 3944.". 

  • Pages (5.2) document unable to select a table within it

    Hi all:
    I created a form for my business back with Pages '09 (the best up until this point).  I have a number of tables within the form and, until now, I cannot select all of them for editing, moving, etc.  I double-click over the table and nothing.  I select all (Command + A) and the table gets highlighted, but you cannot select it.
    I've tried Bring All To Front, Move All To Rear, etc. and that doesn't work.
    Any ideas?
    I'm desperate!

    Hi again Jerry,
    Ok, I should have tried this at the beginning, but I think I've freed it.  It must be a bug in the conversion from Pages '09 to 5.2.  I Copied All > Opened New (blank) > Pasted.  The entire form is identical without Duplicating and now I'm able to select the table within it.
    Is there a way to notify Apple of this?  I find this version of Pages excedingly full of errors and counter-intuitive.
    Thanks again!

  • 220: Unable to set NLS_LANGUAGE. Oracle Workflow Builder

    Hi All,
    When i am trying to login to OWF Builder its throwing error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-00942: table or view does not exist
    .  SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)I already referred:
    Problem with NLS_LANGUAGE
    *MOS tech note : 220:Unable To Set NLS_LANGUAGE Error In Workflow Builder [ID 728330.1]*
    and other related threads.
    All values in registry are correct as per DB NLS settings
    Here the strange thing is i am able to login with apps account its not giving this error and when i am trying to login with another custom db account its throwing error.
    I even granted select, insert, update privilege on WF_LANGUAGES view to custom db user still same issue.
    Any pointers on this issue is really appreciated.
    Many thanks in advance.
    regards,
    X A H E E R

    Hi helios,
    Many thanks for your input.
    Did you check note Error While Connecting To Database Using The Workflow Builder [ID 577905.1]? After you follow note 220:Unable To Set NLS_LANGUAGE Error In Workflow Builder [ID 728330.1] did you restart machine?yes, i restarted my PC and the tech note provides the same solution from tech note *577905.1* as i updated in my earlier post.
    If its the problem of NLS_LANG then it should not allow me login with apps also right??
    But i can login with apps without any issues.
    thanks,
    X A H E E R

  • [CUPS] Unable to set my new CUPS server with an HP printer (solved)

    Hello,
    I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
    (all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
    Here are a list of installed package : cups ghostscript gsfonts hplip
    The printer (USB) :
    (lsusb)
    Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
    (dmesg)
    usb 2-2: new full speed USB device using uhci_hcd and address 4
    usblp0: Disabling reads from problematic bidirectional printer
    usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
    Current configuration (only change made to original configuration) :
    Listen <ip_serveur>:631
    <Location />
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin>
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin/conf>
    AuthType Default
    Require user @SYSTEM
    Order allow,deny
    Allow From all
    </Location>
    When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
    Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
    After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
    I look in log and I can just see this :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    I googled for one hour, but is not more working right now ...
    Some questions :
    - the printer is not detected? Is it because of the ACLs errors ?
    - what the hell is "ACLs" for cups ? Never seen that before ...
    So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
    This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
    Any idea on what to do/try now ?
    EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
    Unsupported format 'application/vnd.cups-command'!
    Current log file :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
    E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
    E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
    (web interface)
    "/usr/lib/cups/backend/hp failed"
    (error_log)
    E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
    E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
    EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
    So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
    But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
    - hpijs, 3.10.9
    - hpijs, 3.10.9.11
    - hpcups, 3.10.9
    Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
    HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
    I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
    E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
    E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    Thanks for all .. hope you don't think I'm crazy ^^
    Last edited by loopx (2011-01-09 20:31:21)

    WD and their lack of support for Mavericks:
    A recent email from WD reads:
    Dear WD Registered Customer,
    UPDATE: November 1st, 2013
    As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
    The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
    Sincerely,
    Western Digital
    Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
    In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

  • How i can set the selected item of a dropDown component from java code

    Hi
    Thank you for reading my post
    How i can set the slected item of a DropDown component from backing beans java code ?
    it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
    In back code i have both value and display values to use them .
    can some one give me some help ?
    Thanks ,

    See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
    See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
    It says
    One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

  • Unable to delete a row in table control

    Hi,
    I'm unable to delete a row in table control.
    I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
    Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
    Please help.
    Regards,
    Manasee
    Message was edited by: Manasee Chandorkar

    hi,
    kindly chk this.
    PROCESS BEFORE OUTPUT.
    MODULE status_9010.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
    ENDLOOP.
    PROCESS AFTER INPUT.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
    ENDLOOP.
    *& Module move_data_to_table OUTPUT
    This is to move the data from the internal table to the table control
    MODULE move_data_to_table OUTPUT.
    This is to move the data from the internal table to the table control
    zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
    READ TABLE int_factor INDEX tab_control-current_line.
    IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
    ENDIF.
    ENDMODULE. " move_data_to_table OUTPUT
    *& Module move_data_from_table INPUT
    Date is moved from the table control to the Internal Table
    MODULE move_data_from_table INPUT.
    To move the data from the table control to internal table 'INT_FACTOR'.
    int_factor-modecode = zmpets_mode-modecode.
    int_factor-rangeid = zmpets_range-rangeid.
    int_factor-factor = zmpets_servfacto-factor.
    int_factor-chk = line.
    *here if the data is there, it will modify
    MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
    APPEND int_factor.
    CLEAR int_factor.
    ENDIF.
    ENDMODULE. " move_data_from_table INPUT
    *delete a line from table control
    MODULE user_command_9010 INPUT.
      CASE sy-ucomm.
    When an entry is deleted, and the entry is removed from the table
    control.
        WHEN 'DELETE'.
          PERFORM f_del_frm_tab_cntrl.
      ENDCASE.
    ENDMODULE.
    FORM f_del_frm_tab_cntrl .
      LOOP AT int_factor WHERE chk = 'X'.
        DELETE int_factor WHERE chk = 'X' .
        CONTINUE.
      ENDLOOP.
      CLEAR int_factor.
    ENDFORM.
    for any clarifiaction pls mail me.
    pls reward points, if this helped u.
    regards,
    anversha.
    [email protected]
    Message was edited by: Anversha s

Maybe you are looking for

  • Error while dragging the table

    Hi Folks, I am getting the following error while dragging the model table on to the diagram tab(creating an interface). Any Ideas?????? java.lang.NullPointerException      at oracle.odi.interfaces.interactive.support.clauseimporters.ClauseImporterDef

  • I have a HP Touchsmart Laptop. Can I uninstall Windows 7 and install windows 8.1 ?

    I want to uninstall windows 7 and install windows 8.1 on my hp touchsmart. Will the touch features work on teh new installation?

  • 'Unfortunately Walkman has stopped'

    walkman can't play on my experia z3 after phone updated, i didn't see unsinstall update on app, pls help me

  • Downloadable ACLs and Access Points

    Is it possible to use Downloadable ACLs (via ACS) with WLAN Clients that attach to a 1200AP? I have tried but it is not working. I think it is because the AP is acting as a bridge to the clients and the ACLs are layer 3/4 aware, but i am new to Airon

  • My google toolbar buttons are missing

    After upgrading to Firefox 4 google toolbar buttons are missing. Even when using Firefox 3.6, this problem used to happen sometimes. I tried deleting localstore.rdf, but it didn't fix the problem. I have windows 7 on my laptop.