Unable to set JNLP file more specifically then version 1.6+ for JavaFX

The jnlp files produced for my JavaFX by NetBeans or the Eclipse plugin have <j2se version="1.5+"/>. When I launch my JavaFX applet from a page in my web-app, on machines with versions of java prior to ~1.6.0_14 the applet doesn't display. To try to force a Java update, I've been experimenting with the j2se version entry. I've got 1.6.0_16 on my development machine, and tried <j2se version="1.6.0_16+"/> and <j2se version="1.6.0.16+"/> to test out the jnlp. I expected that the applet would launch on my development machine, but the instead the java console stated that the version doesn't exist and the applet didn't display. I tried <j2se version="1.6.0_14+"/>, and I was warned that installing 1.6.0_14 would be a downgrade; I expected that my later version of java would pass the test and simply run the applet. What should I be using for the jnlp j2se version value to run properly such that a proper java update dialog is presented when necessary, and the applet just runs when the machine has a proper version of java installed?

Hi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK

Similar Messages

Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory

Dear Experts,
Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server
Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
[root@test .vnc]# cat xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
gnome-session &
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
[root@test .vnc]# cat /etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own). You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted! For a secure way of using VNC, see
# <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
# Use "-nohttpd" to prevent web-based VNC clients connecting.
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.
# VNCSERVERS="2:myusername"
# VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
VNCSERVERS="1:oracle"
[root@test .vnc]# ls
passwd test.oracle.co.zm:1.pid test.oracle.co.zm:3.log test.oracle.co.zm:5.pid test.oracle.co.zm:6.pid
test.oracle.co.zm:1.log test.oracle.co.zm:2.log test.oracle.co.zm:5.log test.oracle.co.zm:6.log xstartup
[root@test .vnc]# more test.oracle.co.zm:1.log
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Mar 11 11:18:37 2014
vncext:      VNC extension running!
vncext:      Listening for VNC connections on port 5901
vncext:      Listening for HTTP connections on port 5801
vncext:      created VNC server for screen 0
Could not init font path element unix/:7100, removing from list!
localuser:root being added to access control list
No profile for user 'root' found
SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
Window manager warning: Log level 32: could not find XKB extension.
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (nm-applet:13697): WARNING **: No connections defined
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
[root@test .vnc]#
Regards
Mohammed Abdul Muqeet

Hi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK

Illustrator CS4 problem loading: unable to set max files...

Haven't opened AI CS4 in a few months. Used to load just fine. Today it crashes when loading and I get this error message: 'Unable to set maximum number of files to be opened.' I'm running OS 10.4.11 on a MacBook. The rest of the CS4 suite opens just fine. I have already removed the preference file for Illustrator out of the user library and also removed the 'com.adobe.illustrator.plist' file. Restarted computer. Still can't open the program.

Check here esp post 27
http://forums.adobe.com/message/2560663#2560663

After installing Java 6 update 11 for OSX 10.6, unable to open .jnlp files.

Appears to download application then quits without an error message. When clicking on the .jnlp file again, nothing happens. I can go into java preferences and remove the application from the cache, but it does the same thing, redownloads the application then doesn't open it.

After doing some research, I found a plugin for Google Chrome that will put current page you are on into an Internet Explorer wrapper with Java 6 installed in it. Its called Rndr and I have tested it on OSX 10.8 and 10.6.8 and it appears to launch any java plugin or .jnlp webstart app in the browser itself.
https://chrome.google.com/webstore/detail/rndr/aeanibohjlokjdpopecapcfaacnhdifi

After installing Java 6 update 11, unable to open .jnlp files.

Appears to download application then quits without an error message. When clicking on the .jnlp file again, nothing happens. I can go into java preferences and remove the application from the cache, but it does the same thing, redownloads the application then doesn't open it.

Java is notoriously responsible for many vulnerabilities, if you must run it then these are the instructions:
Turning on Java
Why will Applets not run after getting Java through Apple Software Update?
Apple disables the Java plug-in and Webstart applications when the Java update is done using Software Update. Also, if the Java plug-in detects that no applets have been run for an extended period of time it will again disable the Java plug-in.
To enable the Java plug-in
Go to Finder > Applications > Utilities > Java Preferences.
In the Java Preferences window check the box for Enable Applet plug-in and Webstart applications.
Installing and updating Java
I DO NOT have Mac version 10.7.3 (Lion) or higher. How do I get Java for other Mac versions?
For Java versions 6 and below, Apple supplies their own version of Java. Use the Software Update feature (available on the Apple menu) to check that you have the most up-to-date version of Apple's Java for your Mac.
I DO have Mac version 10.7.3 (Lion) or higher.
Users of Lion Mac OS X 10.7.1 and 10.7.2 should upgrade to 10.7.3 or later versions via Software Update, so you can get the latest Java 7 version from Oracle.
Download page here:
https://www.java.com/en/download/manual.jsp#mac
Why is Java 7 available only for Mac OS X 10.7.3 and above?
The Java Runtime depends on the availability of an Application programming interface (API). Some of the API were added in Mac OS X 10.7.3. Apple has no plans to make those API available on older versions of the Mac OS.
Further Hardening your Mac against web based Java attacks
Harden your Mac against malware attacks

Twonkey media server unable to read mp4 files created by new version of Leawo Blu Ray Ripper

For the past week I have been ripping DVDs with a new version (v7.3.0.3) of Leawo Blu Ray Ripper. The Twonkey media server (v7.2.9-1) on my WD4100DL will not read the newer files compared to movies ripped with the old version (v7.2.1.4). My Roku media server does just fine. Is there an upgrade of the Twonkey media server available?
Thanks for any advice.

I think that Leawo has helped me to solve the problem. The MP4 files that I made using the old version of Blu-Ray Ripper apparently defaulted to H.264 video codec for MP4 files. Twonky is able to read those files. The new version (7.3.0.3) of Leawo Blu-Ray Ripper defaulted to MPEG4 video codec. Twonkey cannot read those MP4 files. I have changed the video codec to H.264 in Blu-Ray Ripper and I am in the process of ripping a DVD now. I will post the result.

Unable to set JVM file encoding to UTF-8 on Windows

Hi,
I am running Tomcat on 1.5.0_05 JRE. I tried several things to set the jvm file encoding to UTF-8 instead of the default Cp1252, but no luck yet.
The most intuitive approach seems to be to use a JVM option like
"-Dfile.encoding=UTF-8"
but this does not seem to have any effect. I have a WinXP pro m/c. I saw some bug reports which seemed to indicate that changing the JVM file encoding is not an available feature....is that correct? I would really appreciate any help/pointers on this. I will post the solution if I find something in the meantime.
Thanks,
Sriram

I am fail to set it too. I think it is better to separate the file.encoding into two, one for accept local OS, the other for compile .java and .jsp and so on files. So we can change it and the bugs will be decrease!

I'm unable to set my files to "Locked"

How can I change a file so that it is locked? I'm the only user on this computer.
My profile is set to read/write on the file I'm trying to set to locked but I can only enable "stationery pad"
can somebody give me any advice?

Ah, OK! I've managed to recreate your problem. Here's the solution, it's a bit complex so read it through and ideally have it on screen on another computer or print it out first.
1. Go to  > System Preferences > Users & Groups
2. Hold down 'control' and click 'Login Options' near the bottom of the left-hand column
3. Where it says 'Network Account Server' in the main window, click 'Join'.
4. Ignore the input box in the pop-up dialogue, but click the button bottom-left that says ''Open Directory Utility...'
5. Click the padlock at the bottom of the new box and enter your admin password.
6. Go up to the 'Directory Utility' menubar at the top, and choose the menu Edit > Enable Root User
7. Type in the same password that you use for your admin accont and press 'return'
8. Go  > Log out (your user name)...
9. In the login window, type 'root' for the user, and your admin password for the password.
10. In the new desktop that appears, navigate to the file you want to lock. Do 'get info' and you'll NOW see that you can lock it!
11. After locking the file, go  > log out (root user) and re-login in your usual account.
Job done!

How to uninstall a toolbar? (It's not present in control Panel -- Uninstall Program list i.e. it's not in Program Files) More specifically It's Babylon toolbar.

I have a unwanted toolbar named Babylon. I want to uninstall it totally but I can't. I can't found in Program files. When I want a new tab, the new tab is loading with babylon website. I don't want so. Please help....

Hi D60,
maybe 5 years ago there was no "accept solution" button or maybe the OP never came back to this thread or was too lazy to accept a solution?
To make that thread complete:
- all NI software is listed under "National Instruments" in the Software system settings
- the tool you're talking about is named "msiblast" and can be found here in the forum or by asking NI support
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Unable to access PDF files after downloading 30-day free trial for ExportPDF

Hello,
Please accept my apology if I have landed on a page that may or may not offer what I do hope, someone might be able to provide a successful solution which will enable me to access a program I downloaded earlier today, Export PDF, offered by Adobe’s website based on a 30-day free trial.
Prior to landing on this page, I tried numerous other venues through their websites, starting even from the original beginning instructions, only to end up in a forum I assume must exist for the purpose in finding an answer I cannot seem to locate.
Had I not spent the amount of time and effort (and desire) in opting to try out this program prior to committing to and purchasing it, I would not bother with seeking a solution.
Following the online instructions to download the specified free trial period, I signed up with all requested information including -- a unique username, password, email address, followed by the process of verifying the given email address, which ultimately displayed a notification window indicating a completed successful installation.
Hoping to export a PDF file I had accessed earlier in the day, when I opened the file a screen I had never seen before popped up. Briefly grayed out (basically blank), a warning message appeared stating that sign in was required by the Adobe member then proceeded by reading The User Terms, which must be agreed to and accepted before access to any documents would be allowed.
Both of these required steps were followed and completed during and after the download and installation process. At the top right hand corner of this page, next to "Welcome, ____________ (my user name)" and the option ( Sign out ), I find it ironic that something I never would have thought to be the difficult and frustrating process it has become, to ultimately be left with one option other than 'Sign out' and that was to click on 'Help' -- which opened the page I am currently on.
So if anyone is willing to entertain this odd dilemma, I offer my genuine appreciation for your time and solution, should one exist. Otherwise, I’ll just (sarcastically) chalk it up to one of those days spent with technology that leaves me wondering why I bothered in the first place.
Again, many thanks for any input and suggestions.

Hi Robyn Renee\'Drake
I'm a bit confused about what service/software you've installed.
There is no trial of the ExportPDF service (and, it's not something that you install; instead, you access if via a website). Perhaps you downloaded the free Adobe Reader, installed that, and then signed up for ExportPDF through Adobe Reader?
Can you try going to http://exportpdf.acrobat.com and try to sign in there with your username and password? If you're able to log in there, you have a subscription to ExportPDF.
Please let me know how it goes, and we can take it from there.
Best,
Sara

Unable to open FM11 files in FM12 trial version

Hi
I have downloaded the TCS 5 trial verison for evaluation purpose. i am trying to open my existing FM11 files in FM12 but it gets to "Not Responding" mode.
The FM11 doc has plain text in various formats and nothing fancy.
Can somebody please help?
Thanks in advance.
Sreekanth

I've been using 12 for a year or so and never had that problem.
Did you reboot after the installation? Are you using File > Open within
Frame? Did you run the trial install as an Administrator so your
permissions are set properly?
Art Campbell
          [email protected]
"... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
                                                      No disclaimers apply.
                                                               DoD 358
I support www.TheGrotonLine.com, hyperlocal news for Groton MA.

Open vi file with specific Labview version using batch file (Windows)

I want to open certain vi with using Windows batch file and to use specific version of Labview development system. I tried
"C:\Program Files (x86)\National Instruments\LabVIEW 2012\LabVIEW.exe" "path_to_vi"
"C:\Program Files\National Instruments\LabVIEW 2012\LabVIEW.exe" "path_to_vi"
to use 32-bit and 64-bit development systems respectively. However Labview opens file with version which was last used before. Are there any ways to force it use specified version?

No, it's a VI I wrote so that when I open any VI from Windows Explorer it will open it in correct version of LabVIEW according to it's source version (rather than the latest/last version of LabVIEW I opened). All it does to launch the right version of LabVIEW is to call System Exec with the path to the correct version of the LabVIEW.exe and the path to the VI - which is essentially the same as what your batch file is doing.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

How to display swf Files and have a datagrid with paging for javaFX

is there any example of javaFX which can display swf files or have a datagrid with paging.
sorry for my bad english and by the way i am new to javaFX
any help wil be appreciate

Please, refrain from posting identical messages in several forums. Thanks.
And I doubt JavaFX can display SWF files (it is a concurrent technology, after all! :-)), unless using some JNI/JNA technology (via JDIC? a long way...).
Datagrid: it is expected in next version (hopefully), there are some implementations around (look for CRUDfx, for example).

Cannot find mio or .m files in the bankapp files in the eval version of tuxedo for redhat linux

Hi,
After having installed tuxedo in redhat linux and run the simpapp application
said in the documentation,the next step was to put up the bankapp application.However
I am not able to find the mio file,mentioned in the documentation nor any of the
.m files which are required to make the menu for the bankapp client.is mio not
a part of the eval distribution for linux? could anyone please help?

"biji prathap" <[email protected]> wrote:
>
Hi,
After having installed tuxedo in redhat linux and run the simpapp application
said in the documentation,the next step was to put up the bankapp application.However
I am not able to find the mio file,mentioned in the documentation nor
any of the
.m files which are required to make the menu for the bankapp client.is
mio not
a part of the eval distribution for linux? could anyone please help?Hello all,
I'm not found references to mio(1) in Tuxedo 7.1, but they are
exist in Tuxedo 6.5. May be mio(1) was removed from Tuxedo !?
Best regards,
Vladimir
P.S. bankapp customized and works without mio(1).

Specific version of jre in .jnlp file and downloading from local server

Hi,
I have couple of questions regarding the specific version of jre in Java WebStart.
1) I have specified the jre version in .jnlp file as below.
<resources>
<j2se version="1.3.1_02"/>
</resources>
When I saw the File/Preferences/Java of Java WebStart installation, there is an entry with the "Product Version" value as 1.3.1_02 as I installed jre also before launching my application. Still it complains as,
The application has requested a version of the Java 2 platform (JRE) that is currently not locally installed. Java Web Start was unable to automatically download and install the requested version. The JRE version must be installed manually.
Error Code 11 (11 Could not locate requested version) returned from server when accessing resource: (http://java.sun.com/products/autodl/j2se, 1.3.1_02)
When it is there already, why it is trying to get from the Sun's site.
2) I want Java WebStart to download the specified version of jre from my local server, I specified this in the following way,
<resources os="Windows">
<j2se version="1.3.1_02" href="http://host:9095/j2re-1_3_1_02-win.exe"/>
</resource>
I got the error saying,
Bad MIME type returned from server when accessing resource: (http://host/j2re-1_3_1_02-win.exe, 1.3.1_02) - application/octet-stream. where host is my server name. What I need to do here.
Can I have multiple resource tags one for each os.
Help is highly appreciated.
Thanks,
Sreedhar.

Hi Sreedhar,
There are some other useful threads in this forum on this topic:
the "Automatically Installing the IBM JRE 1.2.2" thread has tips from somebody who's put together auto-download of JREs from his own web site:
http://forum.java.sun.com/thread.jsp?forum=38&thread=71061
Also, the behavior of the j2se tag is discussed a little in the "Using a specific JRE" thread: http://forum.java.sun.com/thread.jsp?forum=38&thread=158075
The first step is to add an href attribute to your j2se tag. I was just experimenting with this this afternoon,
and it appears that unless that href is specified (even if it's the java.sun.com default autodl URL!) JWS will not properly check locally-installed 1.3.1 JREs. Once you include Sun's autodl URL as an href, JWS will at least properly enforce the product version among locally-installed JREs. Of course, Sun doesn't actually include 1.3.1 in its autodl section, so it won't download it for you, but it will enable checking of the JREs already installed.
The second step is downloading JREs from your own web site, which is more complicated and explained better by other messages in the forum. But basically, JWS is not simply looking for a .exe installer for a particular JRE. It hits the webserver with a query and expects the webserver to give it back an installer's JNLP file. Look at the referenced threads for more details.
Jim

Unable to set JNLP file more specifically then version 1.6+ for JavaFX

Similar Messages

Maybe you are looking for