Unable to set up connection factory for stand-alone resource adapter

I'm testing out JCA 1.5 in OC4J P4, and I try to register a resource apapter by configuring oc4j-ra.xml like this:
<connector-factory location="MySomething" connector-name="Something">
However, I get the following error:
05/09/28 17:14:24 Notification ==> Warning. Unable to set up connection factory
to location MySomething for a resource adapter deployed as stand-alone.
Is this a bug, or just me?
Would appreciate it if someone knew what was wrong.
Regards
-am

Looks like you need to tell us more...
How is your adapter packaged?
Which files are included (deployment descriptors, etc)?
--olaf

Similar Messages

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

How to set the connection parameters for SQL

How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi ‏21 KB
Doc1.doc ‏45 KB
db1.mdb ‏112 KB

Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

Database connection pool to stand alone java class

Hi all,
I would like to know the best way to use a database connection pool with a stand alone java class.
In my web applications I usually use JDBC Data Source version 5 to connect to my database. In this case, I connect to an Oracle database. But in this scene, I've a WebSphere Application Server to provide this connection pool. But for stand alone applications, I don't know how to do because I don't have a Application server to run on.
Can enyone help me with this beginner question?
Best regards.

I tried to find the pool class I created but it must be on another CD. Anyway, you can easily create a number of connections and place them on a stack (your own or java's). When you need one, pop it off. When you are finished, push it back.
Good luck.

System requirements for stand-alone application

Hi all
Could you tell me system requirements for stand alone app, which requires run time engine and variable engine to work.

Are you wondering about the space requirements? This of course will depend on the application. You can get an idea for this by creating an installer which includes the run-time engine and the variable engine, and then perhaps installing it locally.
Best Regards,
JLS
Best,
JLS
Sixclear

Unable to set working directory (-2147024832) for some app installs

I've found several drivers on a Dell Laptop that don't play well with others in MDT 2012, so I started making an application install package for them instead. Most of them fail with an "unable to set working directory" error. I checked
the app install logs and they don't really make any sense to me. I know the process as a whole works, because I can install .Net 4.0 runtimes without any problems using the same method. The important bits of the ZTI App log are below. Would
be for any guidance on this, as I'm stumped and none of the searches on the exact errors are of much help.
A sample error returned in the wizard is:
WARNING - unable to set working directory (-2147024832)Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
The ZTIApplication.log file contains the following... the first is one that works (.NET 4), the second is one that fails. (Not using code block for this one, it doesn't like it).
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Command has been started (process ID 3212)]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Return code from command = 0]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41033 sent: Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Property InstalledApplications001 is now = {9abb5842-9a8e-45c5-9268-4fa4e69dba34}]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 needs a reboot, initiating.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Dependent application requested a reboot]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRebootRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRetryRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Exiting to initiate a reboot with retry (to pick up where we left off)]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41001 sent: ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Entry: {dee65f94-e269-4eac-927d-6e06c0e0eb9d}]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Name: Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[WARNING - unable to set working directory: (-2147024832)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="2" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41031&severity=1&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=ZTI
installing application &dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="3" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41032&severity=3&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=Error
installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
&dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41032 sent: Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.]
<![LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
Why can't it find it or set the working directory, especially when it's already validated that it's there?
--smthng

I'm not familiar with how Dell does their client side software, but for the server-side software (my area of expertise), I've always done something like the following:
I recommend running every application install in a VBScript/Powershell wrapper. You get logging for the application back on your SLShare as well as its cleaner (you can replace Drivers A05 with A06 by changing the script, rather than editing the application
in MDT).
sApplicationName = "Dell 12G Chipset"
oLogging.CreateEntry "Install-" & sApplicationName & ": Starting " & sApplicationName & " installation", LogTypeInfo
'//Set Destination Folder
sDestFolder = "c:\temp\"
'//Set Source Install Directory
sSourceDir = oUtility.ScriptDir
sSourceDir = sSourceDir & "\Source"
'//Check that folder exists, if not, create it.
oLogging.CreateEntry "Install-" & sApplicationName & ": Check that " & sDestFolder & " exists.", LogTypeInfo
if not oFSO.FolderExists (sDestFolder) then
oFSO.CreateFolder sDestFolder
End If
'//Copy folder from MDT share to C:\Temp
oLogging.CreateEntry "Install-" & sApplicationName & ": Copy from " & sSourceDir & " to " & sDestFolder, LogTypeInfo
oFSO.CopyFolder sSourceDir, sDestFolder
'//Sleep for 2 seconds to allow copy to finish
wscript.sleep 2000
sFile = sDestFolder & "Source\setup.exe"
'// Check if file/folder exists
If not oFSO.FileExists(sFile) then
oLogging.CreateEntry "Install-" & sApplicationName & ": " & sFile & " was not found, unable to install " & sApplicationName & "", LogTypeError
ZTIProcess = Failure
Exit Function
End if
'// Create log entry to show file being run
oLogging.CreateEntry "" & sFile & " -s", LogTypeInfo
iRetVal = oUtility.RunWithHeartbeat("" & sFile & " -s")
if (iRetVal = 0) or (iRetVal = 3010) then
ZTIProcess = Success
Else
ZTIProcess = Failure
End If
wscript.sleep 15000
'// Disable Zone Checks
oEnv("SEE_MASK_NOZONECHECKS") = 1
'//Folder Cleanup
oFSO.DeleteFolder sDestFolder & "Source"
I always copy any drivers that are installed after the fact (everything for me other than SAS/NIC drivers) to the C:\Temp as it can break. I always update my NIC drivers during the build to the latest Dell software using their packs. I try to
not mess with my boot image unless I'm adding a new model that is not supported by the built-in drivers.

Unable to create Queue Connection factory

Hello All,
I am configuring JMS listner with my enterprise appliaction using Sun application Server 8.2 PE.
Let me tell you my setup first: I have created a connection factory *'TCSQCF'* on appliaction server (sun app ser 8.2) which is directing to Sun MQ 4.1 broker listning on port 7677 using this address list 'mq://10.44.5.14:7677/'
My JNDI configurations through which I can acess and post a mess on queues using my simple application employing following setup. (My simple app contains appserv-admin.jar, appserv-rt.jar, imqjmsra.jar and j2ee.jar files ONLY in lib directory)
props.setProperty(Context.INITIAL_CONTEXT_FACTORY,"com.sun.appserv.naming.S1ASCtxFactory");
props.setProperty(Context.PROVIDER_URL,"iiop://10.44.5.14:3700");
String jmsConnectionFactoryName = "TCSQCF";
Object obj = jmsContext.lookup(jmsConnectionFactoryName);
Now when i copy all these four jar files into my enterprise application *'ext'* directory and uses the same setup as shown above I am having the following error??:(
2008-12-03 16:11:57,104 [JMSListener-Thread-12] DEBUG jmslistener - JMSListener.run(), Listener thread started
2008-12-03 16:11:57,119 [JMSListener-Thread-12] INFO jmslistener - **** JMSListener version 1.1.1 ****
2008-12-03 16:11:57,119 [JMSListener-Thread-12] DEBUG jmslistener - Input Queue : INQ
2008-12-03 16:11:57,119 [JMSListener-Thread-12] DEBUG jmslistener - Output Queue : OUTQ
2008-12-03 16:11:57,119 [JMSListener-Thread-12] DEBUG jmslistener - Dead Letter Queue :
2008-12-03 16:11:57,119 [JMSListener-Thread-12] DEBUG jmslistener - Use transactional queues : false
2008-12-03 16:11:57,120 [JMSListener-Thread-12] DEBUG jmslistener - Number of threads : 5
2008-12-03 16:11:57,120 [JMSListener-Thread-12] DEBUG jmslistener - JNDI Factory Name : TCSQCF
2008-12-03 16:11:57,120 [JMSListener-Thread-12] DEBUG jmslistener - JNDI Initial Factory : com.sun.appserv.naming.S1ASCtxFactory
2008-12-03 16:11:57,132 [JMSListener-Thread-12] DEBUG jmslistener - JNDI Provider URL : iiop://10.44.5.14:3700
2008-12-03 16:11:57,133 [JMSListener-Thread-12] DEBUG jmslistener - JNDI Security Principal :
2008-12-03 16:11:57,133 [JMSListener-Thread-12] DEBUG jmslistener - JNDI Security Credentials :
2008-12-03 16:11:57,133 [JMSListener-Thread-12] DEBUG jmslistener - ****
2008-12-03 16:12:01,878 [JMSListener-Thread-12] ERROR commonjms - jndiLookup : JNDI lookup failed for:TCSQCF:
javax.naming.CommunicationException: serial context communication ex [Root exception is com.sun.enterprise.connectors.ConnectorRuntimeException: Failed to look up ConnectorDescriptor from JNDI]
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:317)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.temenos.tocf.commonjms.JMSUtil.jndiLookup(Unknown Source)
at com.temenos.tocf.commonjms.JMSUtil.getQueueConnectionFactory(Unknown Source)
at com.temenos.plugin.jmslistener.JMSListener.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.sun.enterprise.connectors.ConnectorRuntimeException: Failed to look up ConnectorDescriptor from JNDI
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:68)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
... 5 more
2008-12-03 16:12:01,881 [JMSListener-Thread-12] ERROR jmslistener - run : Unable to create a queue connection factory... Stopping
Please Note that my enterprise 'ext' directory contains 20-30 other jar files and I researched on it that MIGHT BE one of the existing 'jar' file are conflicting with the new 4 jar files i have mentioned. I am unable to find out whats wrong and I do not have nay idea which one is causing this issue and how to resolve it.???
Please reply if you have information regarding this issue and if you need anyother information please let me know.
Thanks.

Finally I found the problem which takes me over a week to understand and its SILLY. I am posting here for all of us to never forget this atleast :-)
anyway the above problem as i mentioned earlier is that my newly added JAR files and existing were conflicting somehow.
I just had to add a class path of all of my new four JAR files to force my application to use these jar only not any other
which was missing and my application fails but test application works using ECLIPSE as i did not had anyother files in its 'lib' directory. I edit my script code from BEFORE to After and it all worked. (SILLY SILLY SILLY)
Before _
java -jar ../lib/MyApplication.jar $*
After_
java -cp ../ext/appserv-admin.jar:../ext/appserv-rt.jar:../ext/imqjmsra.jar:../ext/j2ee.jar:../lib/MyApplication.jar $*Hope this helps for people like me :-(
Thanks for your help. Best of luck
Regards

WLS 7.0.4 - JMS connection Factory for RMI queues - server affinity issues help pls

We are using WLS 7.0.4 - One of JMS connection factory setting in admin
console we selected "Server Affinity" options.
We see this messages appear in Weblogic log file,
####<Apr 24, 2006 1:56:53 AM EDT> <Error> <Cluster>
<liberatenode4.dc2.adelphia.com> <node4_svr> <ExecuteThrea
d: '4' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
<000123> <Conflict start: You tried to bi
nd an object under the name sbetrmi2 in the JNDI tree. The object you have
bound from liberatenode2.dc2.adelp
hia.com is non clusterable and you have tried to bind more than once from
two or more servers. Such objects ca
n only deployed from one server.>
and then,
####<Apr 24, 2006 1:58:12 AM EDT> <Error> <Cluster>
<liberatenode5.dc2.adelphia.com> <node5_svr> <ExecuteThrea
d: '7' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
<000125> <Conflict Resolved: sbetrmi2 for
the object from liberatenode5.dc2.adelphia.com under the bind name sbetrmi2
in the JNDI tree.>
Should we use 'load balancing option' instead of 'server affinity' ?
Any thuoghts?
Thanks in adv.
Vijay

Test Reply
          <Vijay Kumar> wrote in message news:[email protected]..
          > <b>WLS 7.0.4 - JMS Connection Factory - Server Affinity - issues in log
          > file</b>
          >
          > We are using WLS 7.0.4 - One of JMS connection factory setting in admin
          > console we selected "Server Affinity" options.
          >
          > We see this messages appear in Weblogic log file,
          > ####<Apr 24, 2006 1:56:53 AM EDT> <Error> <Cluster>
          > <liberatenode4.dc2.adelphia.com> <node4_svr> <ExecuteThrea
          > d: '4' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
          > <000123> <Conflict start: You tried to bi
          > nd an object under the name sbetrmi2 in the JNDI tree. The object you have
          > bound from liberatenode2.dc2.adelp
          > hia.com is non clusterable and you have tried to bind more than once from
          > two or more servers. Such objects ca
          > n only deployed from one server.>
          >
          > and then,
          > ####<Apr 24, 2006 1:58:12 AM EDT> <Error> <Cluster>
          > <liberatenode5.dc2.adelphia.com> <node5_svr> <ExecuteThrea
          > d: '7' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
          > <000125> <Conflict Resolved: sbetrmi2 for
          > the object from liberatenode5.dc2.adelphia.com under the bind name
          > sbetrmi2 in the JNDI tree.>
          >
          >
          > Should we use 'load balancing option' instead of 'server affinity' ?
          >
          > Any thuoghts?
          >
          > Thanks in adv.
          > Vijay

Unable to set the selected value for a ADF LOV

Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
Subashini

Gyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
        OADBTransaction txn = am.getOADBTransaction();
        if (testvo != null)
          OARow row = (OARow)testvo.first();
            if (a.equalsIgnoreCase("Approved"))
                 row.setAttribute("Testrender", Boolean.FALSE);
            else
                 row.setAttribute("Testrender", Boolean.TRUE);
        } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ?

Setting up connection pool for cloudscape 10 embedded database

I got problem with setting connection pool via admin console for cloudscape 10 embedded in j2ee 1.4 (Application server 8.1), what im doing is:
-in resources/jdbc/ConnectionPools i add a new pool
- datasource classname i set up as: "org.apache.derby.jdbc.EmbeddedXADataSource"
-resource type: "javax.sql.XADataSource"
-DatabaseName: "jdbc:derby:D:\\Programowanie\J2EE\domains\domain1\config\notesData"
-set no password and user, becouse i havet set this in database
and when i ping to that datebase i got error:"Operation 'pingConnectionPool' failed in 'resources' Config Mbean."
when i change Datasource Classname to: "org.apache.derby.jdbc.EmbeddedDataSource", this error occur:
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Connection object cannot be null
what im doing wrong? i look everywhere and i cant find solution to my problem...hope you can help me.
Thanks,
Krystian

Amit wrote:
>
"whats are the settings (URL, driver, properties) required to set up a connection pool for DB2 on OS/390 ?I'm using "COM.ibm.db2.jdbc.app.DB2Driver" as DB2 driverHi. If you can successfully use that driver with one of it's simple
JDBC example programs, then show me that example, at least the
part that makes the connection, and I'll show you how to define a pool.
Joe
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advanced positions
for people who want to work with Java, XML, SOAP and E-Commerce infrastructure products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San Jose CA.
Send resumes to [email protected]

Setting up connection pool for DB2

"whats are the settings (URL, driver, properties) required to set up a connection pool for DB2 on OS/390 ?I'm using "COM.ibm.db2.jdbc.app.DB2Driver" as DB2 driver

Amit wrote:
>
"whats are the settings (URL, driver, properties) required to set up a connection pool for DB2 on OS/390 ?I'm using "COM.ibm.db2.jdbc.app.DB2Driver" as DB2 driverHi. If you can successfully use that driver with one of it's simple
JDBC example programs, then show me that example, at least the
part that makes the connection, and I'll show you how to define a pool.
Joe
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advanced positions
for people who want to work with Java, XML, SOAP and E-Commerce infrastructure products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San Jose CA.
Send resumes to [email protected]

Cannot set required connection params for interface import from SAP system

Hello all
I'm trying to import some interfaces (RFC) from SAP system. For this I need to set the connection paramters pointing to the SAP system. Unfortunately it is not possible... all fields remain "greyed out" regardless what I'm trying.
JVM is 1.4.2_12
My user account has SAP_ALL so it shouldn't be an authorization problem...
Where to control this?
Any ideas?
BR
Renaud

Hi,
After you import the SWCV from SLD. while creating the NAmespace in IR select the radio button Import RFC/IDOC from SAP radio button.
And the save it.Now it shld be possible
Regards
Seshagiri

How to change std set up to get a stand alone APO 4.1 without R/3 linkage.

Hello,
I have been looking for documentation/advise regarding the severing of the linkage of an APO system from and existing R/3 system so that it becomes a stand alone system.
Let me explain.
We have recently been bought out by a larger global company who have their own SAP system and are currently incorporating our system into it (DP/SNP & PPDS).
However the global company sees that the our Demand Planning Statistical Forecasting functionality is a local process as they do not use it, so it will not be taken within the global system.
This would mean that we would loose the statistical forecasting functionality, but we would like to keep it as it is fit for purpose and gives very good results.
What is being proposed is that the current APO system linkage be severed from R/3 as the execution will no longer be taking place as SNP an PPDS will be in the new system.
Then we want to set up the remaining APO system as a stand alone client just for Stat F/casting with no linkage with R/3, but linkage for the correct date with interfaces only from non R/3 systems.
From what documentation i have seen so far, it can be done. we just want to know what would be the best procedure to do this and what are the likely problems we will encounter.
Can anyone assist with this.
Regards, Nathan Marchington

Nathan, you could get your basis group to break the link between your SCM system and R/3 through deleting rfc connections in SM59.
Of course you'll have to delete integration models on the R/3 side to stop data from being sent to your old APO system. It will cause an outbound queue once the connection is broken.
On the APO side delete you publication settings in SPRO to stop various txn elements from being sent out to the now disconnected R/3 system.
Cleaning up txn data would keep the system neat. Various ways that you can do this.
If all you are using is DP you can set the deletion flag on the product master once all of the txn data is gone and delete materials if you want to stop any processes other than DP being carried out.
Good luck,
Chris

Adobe Reader for stand-alone computer

Can I get the complete program load for Adobe Reader on a CD to load onto a stand-alone computer that has no Internet connection?
Thank you,
Nelson

You can download the offline installer here: http://get.adobe.com/reader/enterprise/
Be sure to choose the right version and language.
From there you can burn it to a CD or put it on a flash drive and copy it to the other computer.

Is ichat software required for stand alone isight camera to work?

Trying to use an isight stand alone camera with a new mac mini. It will sometimes take a random picture in Phto Booth but I really can't get it to do anything in Photo Booth , Face time, or imovie. In support it says that you have to have iChat on your computer to allow the camera to work in other applications. I don't have iChat and I can't find it as a download.
I would appreciate any information on this.

explasticman wrote:... I ...try the iSight on my wife's Macbook Pro... It works...
Good work on the troubleshooting. You have now ruled out possible connection problems except for possible problems with your new mini's FW800 port. If you have or can borrow another FW device, you can try connecting it to your mini with the same cables and adapter to verify that mini's port is working.
explasticman wrote: ... It now seems like it must have to do with 10.8.5 on my new computer....
If you still believe this, use your Mac's  > Software Update... menu command and apply any needed updates.
I suggest you restart Mac and use Disk Utility to repair permissions before downloading and installing the (3 October) OS X Mountain Lion Update v10.8.5 (Combo) update. Repair permissions AGAIN immediately following the restart that completes the Combo Update.
If your problem continues, use OS X Recovery to reinstall Mac OS X Mountain Lion. Then use  > Software Update… to verify that all your software is up to date. Install any needed updates and repair permissions one more time regardless of whether additional updates are required after reinstalling OS X.
explasticman wrote: ... Is messages really just like iChat?...
No, not "just like" iChat. However, Messages is the replacement for iChat.
For summary info about Messages, see this linked page. For details, you can read all about Messages and compare it to your iChat experience using your mini's Messages > Help > Messages Help menu command.
explasticman wrote:... I would really like to get thie iSight working ...
If nothing else works, your service options for external iSight are shown
in iSight Service FAQ.
Message was edited by: EZ Jim
Mac OSX 10.8.5

Unable to set up connection factory for stand-alone resource adapter

Similar Messages

Maybe you are looking for