Unable to SSH to Server with terminal, Putty Works (SOLVED)

Hi all,
I am unable to ssh to a remote server from the terminal, when I try with Putty it works, heres the output of ssh -v
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /root/.ssh/config
debug1: /root/.ssh/config line 49: Applying options for testing
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug1: Connecting to ********* [*********] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/************.pem type -1
debug1: identity file /root/.ssh/************ type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.3
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 50:97:e6:ff:44:01:02:ca:e2:b4:38:41:86:42:2c:c2
debug1: Host '************' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:4
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/************.pem
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
Authenticated to ************ ([************]:22).
debug1: channel 0: new [client-session]
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug1: Sending environment.
debug1: Sending env LANG = en_US.UTF-8
I suspect it has something to do with my terminal? I am using xfce terminal
Update:
so following advice from other forum members, I am marking this as solved. The situation resulted from me installing a new router and this router blocked SSH connections, I search on stackoverflow and tried this fix at
http://stackoverflow.com/questions/2247 … i-does-not
I applied the setting to /etc/ssh/ssh_config and it started working again.
Last edited by zenwong (2013-10-30 08:47:41)

In addition to marking your thread as solved, you should also give a bit of info on how you came to that concolusion and what that confguration does. If you have the expectation that posting in these threads might yeild assistance, you should also assume that there is the expectation that you will have the courtesty to make the thread useful for others in the event that you find the solution on your own. https://wiki.archlinux.org/index.php/Fo … way_Street

Similar Messages

SCCM 2007 SP2 R3 client on App V Server with Terminal Server

Hii,
We have the following servers in our environment.
Termincal Services with Server 2008 and App v on same machine
SCCM 2007 SP2 R3. When I installed SCCM client on APP V server yesterday, terminal and App V servers / services stopped working and users were unable to use these services. After uninstalling of SCCM client, its working. What is the recommendation for this
situation? Is it recommended to do not install SCCM client on APP V servers? And if we install SCCM client then APP V services stop working?
Please suggest.
Regards, Syed Fahad Ali

issue has been resolved via below link.
http://support.microsoft.com/kb/2694295/en-us
the client advertise setting was set to Allow virtual application package advertisement. For the
time being we uninstall the SCCM client from all APP V servers. Soon we will test with the mentioned setting in above link.
Thanks for your response.
Regards, Syed Fahad Ali

Running LabVIEW 7.1 on Windows 2003 Server with Terminal Services

We are setting up a newtork based solution with LabView. I have looked for documentation on installing LV 7.1 on a Windows 2003 server to run the applications and then have destkops connect to it. Can this be done with a Terminal Services Access solution? Another words, if we were to purchase the LV Volume License Manager, can you install LV 7.1 onto a Windows 2003 server and run the application through TS across a 1GB backbone from the desktop, which makes the server do all the processing?

On Fri, 29 Oct 2004 07:42:13 -0500, ITIQ wrote:
> By running a session through Terminal Services you are NOT running
> anything on the desktop it all runs on the server. So if the software
> was installed on the server and you had the correct number of licenses
> that you allow to connect through Terminal Services, would this not be
> allowed under the EULA?
Sorry for the delay. I'm surprised Philip didn't get back to us... Phil
are you there? Based on his comments, I think he misunderstands your
situation (no offense Phil).
You and I are both talking about the same thing. You basically want a
terminal server license. NI will not provide it. They told me (over the
phone) to get a multi-seat license (MSL). IMO, that's unacceptable. I
expect a LV license taylored specifically for thin client networks. A
multi-seat license is for -->installing<-- on multiple machines. It
conforms to a totally different set of rules. One big one, an MSL assumes
that you intend to run LV locally to interact with DAQ hardware. Since
this won't be done with the thin client, you shouldn't have to pay for it.
> I am not sure if the question is if the license is valid or not, I am
> first just trying to figure out if you can even install LV on a Windows
> 2003 server and run it through a Terminal Services Session.
Since you are talking about a Microsoft operating system, I would say this
cannot be done without some additional/costly junk installed.
Here's another option. If the people you're supporting don't have any
platform dependent things like ActiveX in their LV applications, you
should consider using a Linux-based terminal server. I know for a fact it
works.
I've assisted in setting up a network like this before:
* One Linux terminal server with LabVIEW for Linux (Full Dev)
* One WinXP box on the network with LabVIEW for Win (Prof Dev)
* 5 cheap thin clients
They developed LabVIEW source code on the thin clients and then compiled
packages on the WinXP box for distribution to their customers. The WinXP
was only used for compiles so they just hopped on when necessary. The
eventual plan is for the thin clients to simply open a RemoteDesktop
(using RDP) terminal session and do the compiles from there. I'm not sure
how to do that yet... on the Windows side.
> I see the comments on calling VIs through LV. I am a Network Engineer
> not a LV Developer, so unfortunately I do not know what a VI is. All I
> am looking to do is run low end PCs with LV if I have to, but use the
> server as the workhorse to process all sims etc.
Phil must have thought you needed a LV application to access the front
panel controls of another LV application running on a remote machine. The
VI server is handy in that area but useless in your case.
Hey, you wanna hear about cheap network infrastructure? We bought our
thin client boxes for $15 each! Go to ltsp.org if you want more info on
configuring Linux as a terminal server.
You, and anyone else, can also email me at gnu_voodoo [at] netzero [dot]
com for questions/comments.

Unable to connect to server with zfh proxy

I am running an eval of ZfH 5. I'm unable to connect to the server
with
zfh proxy. I've tried using the IP address and the server name but
was
unable to connect. I have a entry in my hosts file. I using a
Win2000pro
and a Novell server running all updates. Any thoughts on this?

> Hello,
>
> Can you check the registry on the ZfH Server machine? Let me know
if
the =
> HKLM\SOFTWARE\Novell\ZENworks for Handhelds\Current Version\Is Using
=
> Network value is there, and set to 1.
>
> Feel free to email me directly.
>
> Dave Kegel
> Novell, Inc.
>
> >>> <[email protected]> 6/23/03 11:02:36 AM >>>
>
> I am running an eval of ZfH 5. I'm unable to connect to the server
=
> with=20
> zfh proxy. I've tried using the IP address and the server name but
was=20
> unable to connect. I have a entry in my hosts file. I using a
Win2000pro=20=
>
> and a Novell server running all updates. Any thoughts on this?
>
>

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

Unable to access the server with its domain name.

Hi ,
I have configured the site VPN between to cisco ASA and everything is working fine,but if i access the server in url with ip address http://10.XX.XX.XX:123 i am able to connect the server but if i m trying with server name i.e DNS name it doesnt work for eg : http://abcdef:123 .
what could be the issue kindly let me know

The issue is likely dns. Check the dns settings on the device you're trying to access the server's url with. Can you succerssfully do an nslookup on the server's domain name? You'll need the machine to have at least one dns server defined in its dns settings that can resolve the web server's domain name to an ip address. Hope that points you in the right direction.

Unable to start soa server with anonymous attempt to JNDI resource error

I created a new outbound connection in my JMS Adapter deployment then I also created a new Foreign Server in my JMS Module that is deployed on my SOA server.
Now when i try to restart my SOA server it is failing with the below exception.
<Jul 1, 2011 10:43:23 AM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.SecurityException: Anonymous attempt to get to a JNDI resource
java.lang.SecurityException: Anonymous attempt to get to a JNDI resource
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:194)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnection(RegisterWithDomainRuntimeService.java:222)
I have deleted the outbound connection as well as the new Foreign server but still when restarting I am getting the same error.
How can I fix this?
This is blocking me from doing my development work.
Thanks,
Rajesh

Can you check the config.xml of the domain and see if you are still having any references to the JNDI name you had used? If yes try removing the references manually and save the file and then restart the server. PLEASE TAKE A BACKUP OF THE config file before doing so.
Thanks,
Patrick

Unable to use proxy server with MAC OS X Anyconnect client

Hi All,
I have a VPN setup thru a Cisco 5520, Windows clients connect just find and the end users configure there browser to use our internal proxy servers. Users with the MAC OS X Anyconnect client can connect, they configure their Mac to use our proxy server, but the broswers will not work, clients can reach networks and resources behind the VPN gateway and have access to the Proxy(Tried a telnet to that hostname/port). Anyone run into this issue before? I am running ASA 8.3(2), Anyconnect(OS X) 3.1.01065.
Thank You

We had the same problem.
We are behind government firewall so I don't know which Cisco firewall is used but we are using AnyConnect to establish VPN from internet to LAN behind firewall. We have no problems with Windows. With Mac OS X connection through proxy didn't work with Safari and Chrome (both are using system Proxy setting), but it did work with Firefox (which has it's own Proxy).
Finally we found out that ethernet MTU size was the culprit. When we set it to manual, with size being 1347 (or less), proxy started to work.

Retiring SBS2003 with second server running 2008 server with terminal services

Hi,
Can i install Windows Server Essentials R2 2012 and keep the second server that is server 2008 and run it as a terminal server?

Follow any migration document that allows you to migrate from SBS to Essentials. the domain will not change and the member server will remain intact. If it is not already an RDS/TS server you will have to install the role and add the appropriate licensing.
If it is, and the license server is the SBS you will have to move the licensing server from the SBS to the 2008 RDS server itself.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Unable to backup file server with DPM 2012R2

Hello. I've got some strange problem file backing up a file service with DPM 2012R2.
File server - Windows 2012 R2
DPM server - Windows 2012 R2 with DPM 2012 R2
DPM storage - IBM DS3524
The backup lasts for about 11 hours, transfers about 1,7 TB (full file share size is about 11TB) and stops with event 104 ID (The parameter is incorrect (0x80070057)).
In DPM log I see:
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(226) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask::GetFinalStatus [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 31 aasubtask.cpp(906) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING <?xml version="1.0"?>
79556B6BDB60 WARNING <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2147024809" Reason="Error" CommandID="RAWriteDataset" CommandInstanceID="bc2ba145-26ed-412e-8d10-ba20f9859fa2"
GuidWorkItem="edaff08a-7602-4b9b-b4b8-29f043dfb0fa" TETaskInstanceID="663a6cbb-158f-49c4-a3c3-79556b6bdb60"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="998" DetailedCode="-2147024809"
DetailedSource="2"/><RAStatus><RAWriteDataset xmlns="http://schemas.microsoft.com/2003/dls/ArchiveAgent/StatusMessages.xsd" BytesTransferred="1864495988736" NumberOfFilesTransferred="1095357" NumberOfFilesFailed="0"
DataCorruptionDetected="false"/></RAStatus></Status>
05C0 1808 12/18 02:53:59.549 03 runtime.cpp(1376) [00000000010549A0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
79556B6BDB60 FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2147024809" Reason="Error" CommandID="RAWriteDataset" CommandInstanceID="bc2ba145-26ed-412e-8d10-ba20f9859fa2"
GuidWorkItem="edaff08a-7602-4b9b-b4b8-29f043dfb0fa" TETaskInstanceID="663a6cbb-158f-49c4-a3c3-79556b6bdb60"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="998" DetailedCode="-2147024809"
DetailedSource="2"><Parameter Name="AgentTargetServer" Value="SPBSCM.polymetal.ru"/></ErrorInfo><RAStatus><RAWriteDataset xmlns="http://schemas.microsoft.com/2003/dls/ArchiveAgent/StatusMessages.xsd"
BytesTransferred="1864495988736" NumberOfFilesTransferred="1095357" NumberOfFilesFailed="0" DataCorruptionDetected="false"/></RAStatus></Status>
05C0 1808 12/18 02:53:59.549 03 runtime.cpp(1376) [00000000010549A0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 FATAL ]
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(833) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask::CleanUp [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(78) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask: destructor [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 18 dsmsubtaskbase.cpp(86) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CDsmSubTaskBase: destructor [0000000001F92CA0]
05C0 1808 12/18 02:53:59.549 18 mtfparser.cpp(322) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Data corruption near MTF DBLK at logical offset:1864495792128
05C0 1808 12/18 02:53:59.549 18 mtfreader.cpp(142) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : CMtfParser::GetNextDblkReader(pBuffer,
cb)
05C0 1808 12/18 02:53:59.549 18 mtfparser.cpp(246) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : HandleDblkParseFailure(const_cast<LPBYTE>(pBuffer+cbOffset),
cb-cbOffset, cbRead, fNewDblk, hr, &cbRead)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtask.cpp(190) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : m_pMtfReader->Parse(pMsgBody,
cbSize)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(445) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : hr
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(247) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : OnReadCompleted(dwNumberOfBytes,
pAgentOvl, dwError)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(198) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : ProcessWaitCompletion(dwNumberOfBytes,
pAgentOvl, dwError)
I've assigned the letter to the drive to which DPM was backing up, found the last file (the size was 0) and copied this file from the source without any problem.
This problem occurred several times with different storages for replica. Unfortunately previous logs went away so I cannot say that it stopped on the same file, but the error "Data corruption near MTF DBLK" was the same.
When the file server was on Windows 2008 R2 and DPM was 2012 SP1 there were no problems with backup.

Hi,
This is a known issue and is actively being investigated for a fix.
See the following thread:
http://social.technet.microsoft.com/Forums/en-US/b53b82b1-639b-4561-9ed2-f9749abd84f8/dpm-2012-r2-an-unexpected-error-occurred-while-the-job-was-running-id-104-details-the-parameter?forum=dpmfilebackup
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Can anyone help with Terminal not working properly on 2013 (late) mac pro?

New 2013 (late) mac pro. 10.9.2 osx
Using Terminal utility and giving "cat" command, I get a return message of "file or directory not found" even though the files are right there. This is a little procedure I have performed with older mac pro and laptops (also Mavericks) and never had a problem.

Thank you for posting Linc. I worked it out, it is a case of user error.

Impossible to connect to an ssh server with Mysecureshell

Hi,
I have a SSH server (openssh) with MySecureShell and fail2ban installed.
When I try to connect as an user whose shell is MySecureShell, I got "permission denied" (in terminal) or "critical error, impossible to connect" in filezilla. As soon as I replace /bin/MySecureShell by /bin/bash in /etc/passwd, I am able to connect. When I desactivate fail2ban, nothing changes. The problem is thus likely to come from MySecureShell.
I append my /etc/ssh/sshd_config:
# $OpenBSD: sshd_config,v 1.89 2013/02/06 00:20:42 dtucker Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
PrintMotd no # pam does that
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
and my /etc/ssh/sftp_config:
## MySecureShell Configuration File ##
#Default rules for everybody
<Default>
GlobalDownload 0 #total speed download for all clients
# o -> bytes k -> kilo bytes m -> mega bytes
GlobalUpload 0 #total speed download for all clients (0 for unlimited)
Download 0 #limit speed download for each connection
Upload 0 #unlimit speed upload for each connection
StayAtHome true #limit client to his home
VirtualChroot true #fake a chroot to the home account
LimitConnection 10 #max connection for the server sftp
LimitConnectionByUser 10 #max connection for the account
LimitConnectionByIP 10 #max connection by ip for the account
Home /home/$USER #overrite home of the user but if you want you can use
# environment variable (ie: Home /home/$USER)
IdleTimeOut 5m #(in second) deconnect client is idle too long time
ResolveIP true #resolve ip to dns
# IgnoreHidden true #treat all hidden files as if they don't exist
# DirFakeUser true #Hide real file/directory owner (just change displayed permissions)
# DirFakeGroup true #Hide real file/directory group (just change displayed permissions)
# DirFakeMode 0400 #Hide real file/directory rights (just change displayed permissions)
#Add execution right for directory if read right is set
HideNoAccess true #Hide file/directory which user has no access
# MaxOpenFilesForUser 20 #limit user to open x files on same time
# MaxWriteFilesForUser 10 #limit user to x upload on same time
# MaxReadFilesForUser 10 #limit user to x download on same time
DefaultRights 0666 0777 #Set default rights for new file and new directory
# MinimumRights 0400 0700 #Set minimum rights for files and dirs
ShowLinksAsLinks false #show links as their destinations
# ConnectionMaxLife 1d #limits connection lifetime to 1 day
# Charset "ISO-8859-15" #set charset of computer
</Default>
#Rules only for group ftp
#<Group ftp>
# Download 25 k/s
# LogFile /var/log/sftp-server_ftp.log #Change logfile
# ExpireDate "2007-02-28 18:31:01"
#</Group>
#<Group sftp_administrator>
# IsAdmin true #can admin the server
# VirtualChroot false #you must disable chroot to have a full support of admin
# StayAtHome true
# IdleTimeOut 0
#</Group>
#<Group old_client>
# SftpProtocol 3 #force protocol SFTP
# DisableAccount true #disable account
#</Group>
#Rules only for group ftpnolimit
#<Group ftpnolimit>
# Download 0 #0 = unlimited
# IdleTimeOut 0 #no timeout
# DirFakeUser false #show real user on file/directory
# DirFakeGroup false #show real group on file/directory
# DirFakeMode 0 #show real rights on file/directory
# MaxReadFilesForUser 0 #0 = unlimited but still have the restriction MaxOpenFilesForUser
#</Group>
#<IpRange 192.168.0.1-192.168.0.5>
# ByPassGlobalDownload true #bypass GlobalDownload restriction
# ByPassGlobalUpload true #bypass GlobalUpload restriction
# Download 0
# DisableAccount false #enable account
# IdleTimeOut 0 #disable timeout
# LimitConnectionByIP 0 #no limit
#</IpRange>
#<Group trusted_users>
# Shell /bin/tcsh #give a shell access to TRUSTED clients !!!
#</Group>
#<VirtualHost *:22>
# DirFakeUser false #show real user on file/directory
# DirFakeGroup false #show real group on file/directory
# DirFakeMode 0 #show real rights on file/directory
# HideNoAccess false
# IgnoreHidden false
#</VirtualHost>
#Include /etc/my_sftp_config_file #include this valid configuration file
My installation is up to date.
Please let me know if you need supplementary info.
Last edited by Vincent D (2013-04-15 09:54:06)

Vincent D wrote:
Gat wrote:I'm getting the same error, but without using MySecureShell. The problem occurs with any script being placed in user's home directory and specified in /etc/passwd instead of /bin/bash. It's possible for a user to log in to bash and then run the script, so it doesn't seem to be a file permission problem.
Do you also get the "permission denied"?
My workaround is to purely remove MySecureShell, but this is not very safe.
Yes I'm also getting a permission denied error. I guess this might be something we need to set in PAM config, but I wasn't able to find it.

Unable to SSH into both remote & VM machine server

Unable to SSH into both remote & VM machine server
Getting the message
"fork failed: Resource temporarily unavailable"
"ssh_exchange_identification: Connection closed by remote host"
"ssh_exchange_identification: Connection closed by remote host"
"ssh_exchange_identification: Connection closed by remote host"
Please help.

These are the processes currently running: from top command.
These are the ulimit -a settings
This is the output of trying to ssh into local Ubuntu VM (I am able to login here via VirtualBox interface)
$ssh -v -v -v [email protected]
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /Users/spgen/.ssh/config
debug1: /Users/spgen/.ssh/config line 1: Applying options for *
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 102: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Executing proxy command: exec ssh 10.0.2.15 -W 192.168.1.11:22
debug1: permanently_drop_suid: 501
debug1: identity file /Users/spgen/.ssh/id_rsa type -1
debug1: identity file /Users/spgen/.ssh/id_rsa-cert type -1
debug1: identity file /Users/spgen/.ssh/id_dsa type -1
debug1: identity file /Users/spgen/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
fork failed: Resource temporarily unavailable
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
This is the output of trying to SSH into remote AWS server. ( I am able to login through web interface here)
$ssh -v -v -v -i /Users/spgen/pem-files/123.pem [email protected]
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /Users/spg/.ssh/config
debug1: /Users/spgen/.ssh/config line 1: Applying options for *
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 102: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Executing proxy command: exec ssh 10.0.2.15 -W 54.94.230.41:22
debug3: Incorrect RSA1 identifier
debug1: permanently_drop_suid: 501
debug3: Could not load "/Users/spgen/pem-files/123.pem" as a RSA1 public key
debug1: identity file /Users/spgen/pem-files/123.pem type -1
debug1: identity file /Users/spgen/pem-files/123.pem-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
fork failed: Resource temporarily unavailable
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host"
I guess the processes is not the issue, but maybe something to do with ssh config files.
As you rightly guessed 'fork failed' is happening on the local system. Would appreciate any pointers.
TIA.

Access issue with Terminal server in MPLS network

Hi,
i have MPLS network and i have installed windows server 2003 with terminal server.
Problem - every 40 minutes, 2 hours server stopped pinging in spoke network while this worked in LAN,when we trace it by pinging of server IP address we get RTO,
after rebooting the server, we can easily access the server and work for again 40 to 2 hours.i am not able to understand the problem
i have troubleshoot -
1. restarted all network media during the problem
2. reset the LAN card of server
3. restarted the server
after all, it is not resolved.
please help me here to solve this issue.
Thanks,
Damodar
Regards, Damodar

Hi Abrante
thanks for your response but the issue of tftpboot still seems to be there. I am unable to find the issue here. We users try to load their images from the /tftpboot directory on the routers they get the following error messages
Error loading file: errno = 0x3c.
Can't load boot file!!
They are able to connect to another tftpboot server without any issues at all. I am not sure if I have missed out any configuration parameters while enabling tftp. Is there anywhy I can find tftp log files on the server.

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Unable to SSH to Server with terminal, Putty Works (SOLVED)

Similar Messages

Maybe you are looking for