Unable to start 2 instances at the same time in Oracle RAC 11g

Hi all,
My first instance is running. I can't start second instance successful and get "ORA-00304: requested INSTANCE_NUMBER is busy"
Please help!
Thank you!
Dan.

Thanks Shivananda Rao
I set instance_number as below and my db can mount but ... (please see below)
SQL> alter system set instance_number=2 scope=spfile sid='RAC1';
SQL> alter system set thread=2 sid='RAC1';
System altered.
SQL> select status from v$instance;
STATUS
STARTED
SQL> alter database mount;
Database altered.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-30013: undo tablespace 'UNDOTBS1' is currently in use
Process ID: 24535
Session ID: 1 Serial number: 3
SQL>

Similar Messages

Is there any version of Indesign that allows to open multiple instance at the same time

I am using Indesign CS3 to generate the bulk reports automatically(programmatically) using Adobe indesign library . One of the key limitation to this tool is it allows to open only one instance at a time unlike word where multiple instances can be opened at the same time. Is there any adobe indesign too version desktop/server which allows to open multiple instances at the same time. Any help on is appreciated. Thanks.

@PeterG
You said "You might want to examine the End User Licensing Agreement (EULA) for any prohibition against using these two instances at the same time with the same license; the license does permit two installs for the same user that are not used simultaneously." I thought that meant you had read the EULA. It's pretty unambiguous on that point.
For everyone's edification about multiple installations and server use with a standard license here's the relevant text:
2. Software License.
If you obtained the Software and any required serial number(s) from Adobe or one of its authorized
licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive
license to install and use the Software in a manner consistent with its design and Documentation and as
further set forth below. See Section 16 for specific provisions related to the use of certain products and
components, for example font software, Acrobat, After Effects, Adobe Presenter, Contribute, Adobe
Device Central, Flash Player, Flash Builder, and Adobe Runtimes.
2.1 Limited Use. The Software, or portions of the Software, may allow installation and use without a serial
number. If so, you may install but not use such non-serialized Software on any number of Computers as
part of an organizational deployment plan. Further, you may install and use such non-serialized Software
on any number of Computers for demonstration, evaluation and training purposes only and only if any
Output Files or other materials produced through such use are used only for internal, non-commercial and
non-production purposes. You may not use such non-serialized Software after any applicable time-out
period has ended, unless you input a valid serial number under Section 2.2. ACCESS TO AND USE OF
ANY OUTPUT FILES CREATED WITH SUCH NON-SERIALIZED SOFTWARE IS ENTIRELY AT
YOUR OWN RISK.
2.2 General Use. You may install and use one copy of the Software only on the Permitted Number of your
compatible Computers into which you enter a valid serial number.
2.3 Distribution from Server. You may copy an image of the Software onto Computer file server(s) within
your Internal Network for the purpose of downloading and installing the Software onto Computers within
the same Internal Network for use as permitted by Section 2.1 and 2.2.
2.4 Server Use. You may install the Software on Computer file server(s) within your Internal Network only
for use of the Software initiated by an individual from a Computer within the same Internal Network only
as permitted by Section 2.2. The total number of users (not the concurrent number of users) able to use the
Software on such Computer file server(s) may not exceed the Permitted Number.
By way of example, the foregoing does not permit you to install or access (either directly or through
commands, data or instructions) the Software: (a) from or to a Computer not part of your Internal Network,
(b) for enabling Web hosted workgroups or services available to the public, (c) by any individual or entity
to use, download, copy or otherwise benefit from the functionality of the Software unless licensed to do so
by Adobe, (d) as a component of a system, workflow or service accessible by more than the Permitted
Number of users, or (e) for operations not initiated by an individual user (e.g., automated server
processing).
2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
install a second copy of the Software for his or her exclusive use on either a portable Computer or a
Computer located at his or her home, provided that the Software on the portable or home Computer is not
used at the same time as the Software on the primary Computer.
2.6 Restrictions on Secondary Use by Volume Licensees. If the Software was obtained under an Adobe
volume license program (currently known as Adobe Open Options) by any licensee other than an
educational volume licensee, the second copy of the Software made under Section 2.5 must be used solely
for the benefit and business of that volume licensee. For more information about secondary use by volume
licensees, please visit our Web Site at http://www.adobe.com/go/open_options.
There is also language stating that if you have a dual boot or other system capable of running more than one OS you will need a separate license for each platform if you want to run the software on more than one.

Can't start two listeners at the same time

Hello -
I am running Oracle 10g R2 on Solaris 10. I am getting the following error when I try to start my second listener "TNS-01106: Listener using listener name ccn_listener has already been started". There are multiple VIPA's assigned to the server, so I am trying to start two listeners at the same time (I can start each one separately). The different IP's are referenced in the listeners (even though they use port 1521), so there should not be a conflict. I also gave the two listeners distinct non-default names. The listeners are running under two differenct Oracle homes.
Here is the code of the listeners:
listener 1:
PHD_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.49.236.119)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_PHD_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u02/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME=phdv410g)
(ORACLE_HOME = /u02/app/oracle/product/10.2.0/db_1)
(SID_NAME = phdv410g)
listener 2:
CCN_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.49.236.131)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_CCN_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME=ccn10gt1)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = ccn10gt1)
If anyone has any ideas about why I can't start these two listeners togethers, I would really appreciate it.
Thanks!

Hi,
Look at the error: "Listener already started"...
Can you check if that is right ?
ps -ef | egrep lsnrWaiting for feedback.
Regards,
Yoann.

After updating firefox today to 6.0, firefox is unable to load multiple tabs at the same time. When I try, firefox refuses to load any pages, and instead is stuck trying to connect to each page.

After I updated firefox to 6.0 today firefox has developed a problem loading multiple tabs. When I try to load 10+ tabs, either at the same time or by opening each tab separately, each tab is stuck trying to connect to the desired page. This continues if I close all the tabs and try to load a single page, the single page is unable to get pass connecting. In order to load a new page when this situation arises I must close down firefox and start again, and the program has no history of the previous session.

Other solutions
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_other-solutions
Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their databases before doing a scan.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page -
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
* Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
* Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
* SWI Forums - http://www.spywareinfoforum.com/
Check and tell if its working.

How can I start two Vi at the same time?

I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.

One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
Message Edited by Dennis Knutson on 03-20-200609:35 AM
Attachments:
Run Method.JPG ‏44 KB

Again, cannot start multiple domains at the same time

Because the original question is marked as answered and the problem persists, I need to submit it again:
With the latest plugin, in Glassfish Kepler, when I try to start the second server (same Glassfish, different domain) - it'll simply not start (the console remains empty) and after a while I get the time-out message, that the server could not be started. Even if 2 Eclipses are started, there only one server at a time can be started.
This is a major issue for me, can you please help? Is there a lock file that I can delete or another workaround?

Hi. The weird thing is that after the last update it worked for me, too, for a while - but then it didn't. I think there may be some sort of lock that hasn't been released when a forced shut down happened...?
If I start the servers either outside of eclipse (command line), or using eclipse's external tools (which is pretty much the same, I think), they work just fine. And the status in the servers view gets updated to either started/stopped, correctly.
And also, the case when I create domains/start servers outside of eclipse and then create the server in the servers view, the status update works.
So yes, if there are multiple domains started at the same time outside of eclipse, the plugin shows them, but it cannot start them itself.
Eclipse GlassFish Tools
Part of Oracle Enterprise Pack for Eclipse 12.1.2.1 - version 6.2.0.201307232054
Glassfish
Installed Version:
Oracle GlassFish Server 3.1.2.2 (build 5)

"Newbie" Unable to run two actions at the same time please help

Hello
I'm a newbie (2 weeks) on Labview, so I hope my problem will sound easy for some of you.
I want to read a file and at the same time get the reading from my sensors (4 sensors).
My program is working when I do each thing in a different program but when I add them the program only read the text file and stop reading the sensor signals...I attach the program file.
The goal is with the text file to add an exact time for each sensor signal I record.
Is there any other possibilities to include a time with the sensors signals recorded ? I need to do this to synchronize the sensors values with CAM program.
Thanks
/Xavier
Ps I used a scan rate of 12000/s but I try 1000/s
and the sensor acquisition is still not working
Attachments:
test3Rdif2802.vi ‏493 KB
readfile.txt ‏195 KB
sensoracquisition30s.txt ‏210 KB

from a glance at your code, it appears that you have nested a loop to read your file, inside a loop to read your sensors. this means the nested loop to read your file must finish before the outside loop to read your sensors can run through another iteration. what you want to do is separate the two loops to run independently of each other (in parallel). use a global variable to know when to stop the loop (if they need to stop at the same time) and if you need to pass data between the loops use a queue (easiest) or you can also use globals with semaphores.

Unable to open multiple instances of the same page to display report

Hi,
I have a scenario to implement. I need to show SSRS report on a button click(ViewReport). What I want is to open a new page(Report.aspx) on ViewReport_Click.
Now for the second time I want user to be able to change the parameters and click on the ViewReport button again to open a new instance of page, while the old page is still alive. So, that user can compare both the reports.
Now what is happening is the same web window is getting refreshed.
Please help: Its really urgent for me to get this working.
Thanks,
Anshuman

Hi AnshumanSingh,
In my opinion, this thread is related to ReportView forum. So please post thread on that forum for more effective response. Thank you for understanding. Please refer to the following link.
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to start two threads at the same time

Hi there,
I want to include multithreading in the CVI program. I have two tasks which has no dependence between them, so I would like to start two threads for perform the tasks. I follow the introduction http://www.ni.com/white-paper/3663/en/ to start my code. In my code, I add a command button, when it is pressed, I create two threads to perform the tasks. In each task, I have a big loop and in each iteration, I use ProcessSystemEvents to avoid no response on system message. But it doesn't work actually, the program suspended. I wonder must I initialize the threads in main. I am looking for a way to start the threads in the callback function for a button since I am not starting those threads at the beginning but while it is triggered.
the main frame of the code looks
int CVICALLBACK Test1(void *functionData)
{ int i=0;
for (i = 0; i<100000; i++) {ProcessSystemEvents();}
return 0;
int CVICALLBACK Test2(void *functionData)
int i = 0;
for (i = 0; i<100000; i++) {ProcessSystemEvents();}
return 0;
int CVICALLBACK cmdcb(int panel, int control, int event, void *callbackData, int eventData1, int eventData2)
{ int threadID1, threadID2;
if (event==EVENT_COMMIT)
SetPanelAttribute(panelHandle, ATTR_DIMMED, 1);
CmtScheduleThreadPoolFunction(DEFAULT_THREAD_POOL_HANDLE, Test1, NULL, &threadID1);
CmtScheduleThreadPoolFunction(DEFAULT_THREAD_POOL_HANDLE, Test2, NULL, &threadID2);
CmtWaitForThreadPoolFunctionCompletion (DEFAULT_THREAD_POOL_HANDLE, threadID1, 0);
CmtWaitForThreadPoolFunctionCompletion (DEFAULT_THREAD_POOL_HANDLE, threadID2, 0);
return 0;
Attachments:
TestThread.zip ‏239 KB

In my opinion your threads may be simply lasting longer than expected due to an incorrect sleep policy of threads paired with with ProcessSystemEvents () in the loop.
I made up a quick example that shows this behaviour: playing with "Do not sleep" and "Call ProcessSystemEvents" options you can see how threads execute.
BTW: do not forget to release the thread function IDs at the end of functions.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
thread.zip ‏7 KB

Unable to start SAP due to the connection error with Oracle

Dear All,
We have done distributed installation. CI, Oracle has been installed successfully.
But when we tried to connect the DB from CI. we are getting the error
R3trans -d is giving the return code 00012, when we tried to start system from CI.
Following is the trans.log error
$ more trans.log
4 ETW000 R3trans version 6.09 (release 640 - 26.10.04 - 15:45:42).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 05.05.2009 - 18:03:30
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Tue May 5 18:03:30 2009                              48 0.000048
4 ETW000 [dev trc     ,00000] db_con_init called                                    11 0.000059
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             40 0.000099
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/BSW/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              37 0.000136
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/BSW/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000                                                                            3493 0.003629
4 ETW000 [dev trc     ,00000] Library '/usr/sap/BSW/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              18 0.003647
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/BSW/SYS/exe/run/dboraslib.o
4 ETW000                                                                              34 0.003681
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/BSW/SYS/exe/run/dboraslib.o' is "640.00", patchlevel (0.32)
4 ETW000                                                                             120 0.003801
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/BSW/SYS/exe/run/dboraslib.o
4 ETW000                                                                              20 0.003821
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/BSW/SYS/exe/run/dboraslib.o
4 ETW000                                                                              42 0.003863
4 ETW000 [dev trc     ,00000] New connection 0 created                              20 0.003883
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              23 0.003906
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         25 0.003931
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              18 0.003949
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              20 0.003969
4 ETW000 [dev trc     ,00000] Got ORACLE_HOME=/oracle/BSW/920_64 from environment
4 ETW000                                                                             300 0.004269
4 ETW000 [dev trc     ,00000] -->oci_initialize                                     20 0.004289
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC        4762 0.009051
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPR3's password            29 0.009080
4 ETW000 [dev trc     ,00000] Connecting as /@BSW on connection 0 ...               22 0.009102
4 ETW000 [dev trc     ,00000] Allocating service context handle                     22 0.009124
4 ETW000 [dev trc     ,00000] Allocating server context handle                      13 0.009137
4 ETW000 [dev trc     ,00000] Attaching to DB Server BSW (con_hdl=0,svchp=110791c98,svrhp=1107942f8)
4 ETW000                                                                              67 0.009204
4 ETW000 [dev trc     ,00000] Assigning server context 1107942f8 to service context 110791c98
4 ETW000                                                                           39616 0.048820
4 ETW000 [dev trc     ,00000] Allocating user session handle                        29 0.048849
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=110791c98,srvhp=1107942f8,usrhp=11079cd38)
4 ETW000                                                                              24 0.048873
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000                                                                            2415 0.051288
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=1,svrhp=1107942f8)
4 ETW000                                                                              28 0.051316
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=110791c98,srvhp=1107942f8)
4 ETW000                                                                              18 0.051334
4 ETW000 [dev trc     ,00000] Deallocating server context handle 1107942f8         142 0.051476
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000                                                                              25 0.051501
4 ETW000 [dev trc     ,00000] Try to connect with default password                  20 0.051521
4 ETW000 [dev trc     ,00000] Connecting as SAPR3/<pwd>@BSW on connection 0 ...
4 ETW000                                                                              19 0.051540
4 ETW000 [dev trc     ,00000] Allocating server context handle                      11 0.051551
4 ETW000 [dev trc     ,00000] Attaching to DB Server BSW (con_hdl=0,svchp=110791c98,svrhp=1107942f8)
4 ETW000                                                                              27 0.051578
4 ETW000 [dev trc     ,00000] Assigning server context 1107942f8 to service context 110791c98
4 ETW000                                                                           33038 0.084616
4 ETW000 [dev trc     ,00000] Assigning username to user session 11079cd38          15 0.084631
4 ETW000 [dev trc     ,00000] Assigning password to user session 11079cd38          13 0.084644
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=110791c98,srvhp=1107942f8,usrhp=11079cd38)
4 ETW000                                                                              22 0.084666
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000                                                                            1858 0.086524
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=1,svrhp=1107942f8)
4 ETW000                                                                              18 0.086542
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=110791c98,srvhp=1107942f8)
4 ETW000                                                                              19 0.086561
4 ETW000 [dev trc     ,00000] Deallocating server context handle 1107942f8         123 0.086684
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000                                                                              24 0.086708
4 ETW000 [dblink      ,00419] ***LOG BY2=>sql error 1034   performing CON [dblink#1 @ 419]
4 ETW000                                                                              57 0.086765
4 ETW000 [dblink      ,00419] ***LOG BY0=>ORA-01034: ORACLE not available           18 0.086783
4 ETW000                        ORA-27101: shared memory realm does not exist
4 ETW000                        IBM AIX RISC System/6000 Error: 2: No such file or directory [dblink#1 @ 419]
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BSW'"
Could you please provide us the relavant solution.

hi
> 4 ETW000 [dblink      ,00419] ***LOG BY0=>ORA-01034: ORACLE not available           18 0.086783
Check for your ORACLE_HOME and ORACLE_SID
ORA-01034 is thrown during you attempt to upgrade because there is an invalid entry in one of the following files:
/etc/oratab
/var/opt/oracle/oratab
Regards,
Nitin Salunkhe

[KDE] Unable to play two sounds in the same time

I am switching from gnome to kde, and i did a fresh install (i formatted) the entire system.
The problem is that, for example, before in genome i was able to have songbird playing while a movie was being as well played and if someone talked to me via pidgin, the warning sound would be heard as well....
In kde, if i am listening to amarok, i cannot listen the audio from a video from youtube, and sometimes, while i am listening to music, someone talks to me on kopete, stops the playback on amarok and then plays the new message warning sound...... i understand this is a misconfiguration of my audio system, isn't it?
Where should i start from? I am using xine as sound engine (phonon-xine)-.....
Thanks!
Last edited by Xi0N (2009-10-15 16:08:10)

Seems to be a problem with your alsa conf...
But, here with a stupid intel chipset, it works without any configuration !
Maybee your gnome was configured with pulseaudio?

Can we Invoke the 'N' no.of webservices at the same time in Oracle ESB

Hi,
Good Day..
This is Ishmayel.Vemuri..
I little bit knowledge in ESB development..but having 3+ exp on webservices and java related technologies
I have the following requirment...
I have 'N' deparmental servers available in 'N' diffrent locations. We want move the data available in diffrent departmental servers(Oracle DB) into one centralized server..for this we developed one web services for each deparmental server to move the data.
** Now my doubt is Is it possible to call 'N' no.of webservices of 'N' departmental Servers in Oracle ESB by using any adpater service..? **
If you have any Idea kindly send me the details to [email protected]
Thanks in Advance..
Regards,
Ishmayel.V

Hi Ishmayel, sorry for my misunderstanding. But the situation you describe is also possible. Just add for each external reference a exposed service interface and wire this to a mediator component. Within this mediator you define only one operation that routes all the requests to one target server.
EDN is described over here: http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/obe_intro.htm#SOASE004
Regards,
Melvin

How do you start 2+ audio files playing at the same time?

I am trying to play 2 audio files at the same time, but I cannot figure out how to start them playing at the same time without latency issues.
If someone can please explain the process for doing this using Audio Queue Services, I will forever be in your debt.
This is for iPhone, but I was getting no love in those forums on this issue.

Thanks for your reply. Apple's iPhone Application Programming Guide states the Following:
*Playing Multiple Sounds Simultaneously*
To play multiple sounds simultaneously, create one playback audio queue object for each sound. For each audio queue, schedule the first buffer of audio to start at the same time using the AudioQueueEnqueueBufferWithParameters function.
This leads me to believe that it is possible. I have just not been able to get them to play precisely the same time, there is always delay.

Is it possible to realize two different processes in the same time with TDMS?

Hello all,
we have one TDMS but a lot of workstreams. Is it possible that 2 different workstreams in the same time realize anonymization in TDMS?
Thanks in advance!!!
Ilkin Mammadov

Hello Anita,
I am sorry.I mean we have a lot of projects (for example Procurement, Finance, Logistics, etc) and each of them wants to anonymize. But it is existing just one TDMS. Can these projects start with anonymization in the same time or they have to wait till one of projects finished anonymization?
Thanks in advance!
Best regards,
Ilkin

SQL Server wants to open properties of wrong database and cannot restore logs of different databases at the same time

We have implemented our own way of logshipping by backing up the transaction logs of all our non-system databases every hour. Then we transfer the backups (before SQL Server 2008 R2 with additional zip and unzip steps) to the second environment where we
restore them only during the night on databases in standby-state (Like this, our developers can access the databases without disturbing the productive system and we can restore the t-logs during night, so not shutting out the developers during the day).
Now since we replaced our hardware in the productive environment, we replaced the hardware in the second environment with the servers from previous productive environment. Same SQL Server 2008 R2, same Service Pack (SP2), same installation procedure. But
since then the SQL Server in the second environment behaves different:
- When the logs of some database "A" are restored, I cannot access the properties of any database, i.e. database "B", I only get the error message "Cannot show requested dialog. (SqlMgmt) Database 'A' cannot be opened. It is in the
middle of a restore. (Microsoft SQL Server, Error: 927)"
- Our logshipping runs multiple instance at the same time, so restoring multiple databases' logs. But since the change, two of the instances fail restoring of datatbases, i.e. "B" and "C" with the error message "Database 'A' cannot
be opened. It is in the middle of a restore.". The jobs guarantee to restore only logs of the database they need to restore, they have strictly separated sets of target databases and only try to restore the databases of their sets.
Before the new installations, we did not have these strange behaviours. But as said, it is the same SQL Server version, the same service pack, and we followed the same installation document but maybe with the small changes in settings. The user the jobs
are running under is a domain admin, the login they use has dbcreator, processadmin, db_owner and db_backupoperator roles. My login on the SQL Server has sysadmin rights and as described similar problems.
Is this problem known or does somebody have an idea where to go looking for?
Thanks, Chris

Hi Christar,
According to your description, after you configuring Log shipping between two database, you remove the hardware from production environment to dev environment, in this hardware, there are saved the transaction logs of your database.
When restoring your database, there will occurs error 927, right?
SQL Server Log shipping allows you to automatically send transaction log backups from a
primary database on a primary server instance to one or more
secondary databases on separate secondary server instances. It consists of three operations:
1.Back up the transaction log at the primary server instance.
2.Copy the transaction log file to the secondary server instance.
3.Restore the log backup on the secondary server instance.
Since you want to move your hardware avoiding copy job, we need to verify if .mdf and .ldf file are not saved in your hardware, or else,
if you move your hardware, you could not open your database in your Primary Server. I recommend you can refer to the following steps.
Full back up your primary database and restore it into the secondary database. It would have been set up as WITH STANDBY ,the databases would read StandBy/ Read Only.
Perform transaction log backups via a SQL Server Agent job running on the primary server instance, save them in your hardware.
In night, you move hardware to your dev environment, you can manually restore these transaction log backups or set up a SQL Server Agent job to restoring them from your hardware.
There is detail about how to configure log shipping in SQL Server 2008R2 step by step, you can review it.
http://mostafaelmasry.wordpress.com/2013/01/02/log-shipping-in-sql-server-2008r2-step-by-step/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Unable to start 2 instances at the same time in Oracle RAC 11g

Similar Messages

Maybe you are looking for