Unable to start from sub process

The scenario of our application is :
We have multiple processes,each again having multiple activities inside them.
There is one main processes and the others are all sub processes.
The main process looks something like below :
Start->Sub-process1->Sub-Process2->Sub-Process3->Sub-Process4->Sub-Process5->End
My requirement is to start the main process from Sub-Process2,rather than the usual way of instantiating the main process.
I tried configuring Sub-Process2 as an alternative Start (in the Work Flow Builder),but that doesnt seem to be working.
I am using Java APIs to interact with Oracle Work Flow.
Any ideas ??
Amit.

One possibility is to call WF_ENGINE.CompleteActivity() if you need to start a process with an activity node that is mid-stream in a process thread and not at the beginning of a process thread. The activity node you specify as the beginning of the process must be set to 'Start' in the Node tab of its property page.
http://download-west.oracle.com/docs/cd/B10501_01/workflow.920/a95265/wfapi42.htm#comact

Similar Messages

Unable to start obiee11g oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

Unable to start from disk while holding C key.

Hi for some reason I am unable to start boot from disk (Mac OS X install disk) while holding down C key. I've forgot my password and cant log in.
Is there any other way I can reset my password? Or format my hd? or even reset it back to factory setting?
I lost my os x disk so i bought one from ebay instead. could this cause me not able to boot from cd?
Message was edited by: what's going on

If you are using a grey install disk that is not for your model, that indeed may be why you cannot start the machine with the C key held down.
Another reason may be if the MBP has Firmware Password Utility on.
Is this related to the PowerBook you bought on eBay? You don't seem to have much luck there.

Duplication of Notes from Sub-Process to Main Process

Hi all,
I have sub-process and a main process.
I create notes in the main process.
Then put them in the sub-process by re-creating them in the sub-process.
And then when I come out of the sub-process,I re-create the notes in the main process, so that the sub-process notes are added up with the main process notes.
The problem is that the main process notes are duplicated.
The reason being,
I have already transferred and re-created notes in the sub-process while entering it.
I also still have notes in my main process.
When I come out of the sub-process, I transfer and re-create notes in the main process too.
Now, this adds up to the notes already in the main process and so there is a duplication of notes in the main process.
So its
Notes created in Main Process --> Transferred to Sub-process and re-created them for sub-process --> Transferred to Main process and re-created them for merger of the main process notes with the sub-process notes.
(Notes in Main Process) ---> ( Notes in Main Process + Notes in Sub-Process) --> ( Notes in Main Process + Notes in Sub-Process + Previous Notes in Main Process)
Previous notes in Main Process = Notes in Main Process
Therefore the duplication.
notes ( in built) array has no option to clear it up.
How do I clean the notes then?
I need to re-create and transfer them everytime I move from main process to sub-process and back to main process for showing up in the notes section of the workspace?
Also the creator and the creation time of the notes is not reflected.
They seem to be constant variables.
How do I resolve these issues?

Anybody on this?

Unable to start the database(Process m000 died, see its trace file)

Hi,
Oracle Version:10.2.0.1
Operating System:Linux
Hi suddenly the database went down and in alert logfile it is showing error like this.
Fri Feb 18 01:40:51 2011
Process m000 died, see its trace file
Fri Feb 18 01:40:51 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:41:18 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_15998.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:41:19 2011
Process m000 died, see its trace file
Fri Feb 18 01:41:19 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:42:19 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_16032.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:42:20 2011
Process m000 died, see its trace file
Fri Feb 18 01:42:20 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:43:20 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_16036.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:43:21 2011
Process m000 died, see its trace file
Fri Feb 18 01:43:21 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:44:21 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_16042.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:44:22 2011
Process m000 died, see its trace file
Fri Feb 18 01:44:22 2011
ksvcreate: Process(m000) creation failedand generating lot of trace files.
Please help me how to solve this .
Thanks & Regards,
Poorna Prasad.

In my alert log file I also find this error.
ed Feb 16 06:11:13 2011
Process J000 died, see its trace file
Wed Feb 16 06:11:13 2011
kkjcre1p: unable to spawn jobq slave process
Wed Feb 16 06:11:13 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_cjq0_26196.trc:
Wed Feb 16 06:11:13 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_j000_4172.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Wed Feb 16 06:11:14 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_j000_4172.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Process J000 died, see its trace file
Wed Feb 16 06:11:14 2011
kkjcre1p: unable to spawn jobq slave process
Wed Feb 16 06:11:14 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_cjq0_26196.trc:Thanks & Regards,
Poorna Prasad.S

Grey loading screen when start up + unable to start from disc

When I start up my MBP I get a very slow grey loading screen. After a while it starts up my mac and it runs like normal. So no i finally got sick of the 10 min waiting before start up, I decided to re-instal from disc. When i normally insert the disc it starts. then I select the Instal and it rebooths. But it stays on a grey screen when reboothing.
I also tryed to start it up with C and with holding alt and then selecting the cd. With C i get the same grey screen(Without loading bar and mac logo) and with Alt it just get stuck at selecting the cd.
When I go to Disk Utility then I can use Check disk but not the delete one.
I don't need to back up, just want it to work fine again.
I hope you can help me out.

Hi Arthur, and welcome to Apple Discussions.
While booted from the install disc, have you opened Disk Utility and checked SMART status and run Repair Disk?

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

How the invocation between process and sub-process work?

As I have read throught some posts here and know that the web service whicn is used to trigger the process is asynchronous.
so is the invocation between process and its sub-process asynchronous using web service?
supposed there is a process like below:
Start Event -
>Sub-Process ->Automated Task-->EndEvent
I have some confused questions:
1: is it asyn to invoke the subprocess?
2: if the invocation is asyn, is the next "Automated Task" triggerred before the completion of the nested subprocess? It seems to be, but it is not so reasonable.
3: if the invocation is asyn, how the process get the return value of the nested subprocess?

Hi John,
the invocation of sub-processes is done via an internal runtime mechanism and not via normal Web Service call.
The sub-process call is synchronous, so the calling process is waiting for the reply from the sub-process. There are a few things to keep in mind when using sub-processes:
If you are branching off parallel execution paths (via a split gateway) within the sub-process and are using a regular end event, only the first token arriving at the end event will return to the calling process. The sub-process will keep running until either the last of its tokens flows into the end event or until the calling process is being terminated. In any case, the calling process will not react to any more tokens arriving at the sub-processes end event.
If you are using parallelism within the sub-process, but want it to terminate once the first token arrives the end, use a terminating end event in the sub-process.
Don't use the correlation condition at the start event of a sub-process. If this condition evaluates to 'false', the sub-process will never be started, but the calling process will wait forever for a reply.
If you want the sub-process call to behave asynchronously, you can model the sub-process to split off a token to the execution path where it does the actual work and have another straight path directly from the split gateway to the (non-terminating) end event. That way the calling process will continue right away, but of course you cannot expect any response coming out of the sub-process.
Best regards,
Oliver

Unable to start extract for Mysql DB on windows

Hi,
I have installed Mysql database on windows machine, also installed GoldenGate
and i have edited the my.cnf (C:\Program Files\MySQL\MySQL Server 5.5) file with below entries,
log-bin="C:\Program Files\MySQL\MySQL Server 5.5\test-bin.log"
max_binlog_size=4096
binlog_format=row
and restarted the mysql service then add the mgr prm and created extract process.
while trying to connect the mysql db from ggsci getting below error message
GGSCI (PC) 29> dblogin sourcedb test, userid root
Password:
2012-12-04 15:05:04 WARNING OGG-00769 MySQL Login failed: . SQL error (2003).
Can't connect to MySQL server on 'localhost' (10061).
ERROR: Failed to connect to MySQL database engine for HOST localhost, DATABASE t
est, USER root, PORT 3306.
also Unable to start the extract process
edit params exta
extract exta
dboptions host localhost, connectionport 3306
sourcedb test, userid root, password *****
exttrail E:\ogg_mysql\dirdat\ea
table test.*;
tried with exact hostname and localhost also but no luck.
but i can able to connect the mysql through command prompt
C:\Users\>mysql -u root test -p
Enter password: ******
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.5.28-log MySQL Community Server (GPL)
Copyright (c) 2000, 2012, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
Edited by: 899920 on Dec 4, 2012 1:44 AM

Hi ...
Please check if the mysql_home variable is ok:
MYSQL_HOME=<MySQL bin location>
To locate the configuration file, Extract checks the MYSQL_HOME environment variable: If MYSQL_HOME is set, Extract uses the configuration file in the specified directory. If MYSQL_HOME is not set, Extract queries the information_schema.global_variables table to determine the MySQL installation directory.
More details: http://docs.oracle.com/cd/E35209_01/doc.1121/e27289.pdf
Try it and put here your experiences.

Unable to start Extract and Replicate process?

Hi,
I have setup GG b/w two 10.2 databases in two different server(RHEL 5) . But unable to start the extract and replicate process
Source
GGSCI (prod.naveed.com) 1> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     STOPPED
EXTRACT     STOPPED     EXT1        00:00:00      00:43:42
GGSCI (prod.naveed.com) 2> start mgr
Manager started.
GGSCI (prod.naveed.com) 3> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
EXTRACT     STOPPED     EXT1        00:00:00      00:43:48
GGSCI (prod.naveed.com) 4> start extract ext1
Sending START request to MANAGER ...
EXTRACT EXT1 starting
GGSCI (prod.naveed.com) 5> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
EXTRACT     STOPPED     EXT1        00:00:00      00:43:56
GGSCI (prod.naveed.com) 6> view params mgr
PORT 7809
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (prod.naveed.com) 7> view params ext1
–extract group–
extract ext1
–connection to database–
userid GG_ADMIN, password GG_ADMIN
–hostname and port for trail–
rmthost 172.168.1.11, mgrport 7809
–path and name for trail–
rmttrail /home/oracle/golden_gate/dirdat/lt
–DDL support
DDL INCLUDE ALL
ddl include mapped objname NAVEED.*;
–DML
table NAVEED.*;
GGSCI (prod.naveed.com) 8> exitTarget
[oracle@Test golden_gate]$ ./ggsci
Oracle GoldenGate Command Interpreter for Oracle
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
Linux, x86, 32bit (optimized), Oracle 10g on Apr 23 2012 07:06:02
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
GGSCI (Test.naveed.com) 1> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    STOPPED     REP1        00:00:00      00:35:39
GGSCI (Test.naveed.com) 3> start replicat rep1
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (Test.naveed.com) 4> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    STOPPED     REP1        00:00:00      00:36:06
GGSCI (Test.naveed.com) 5> view params mgr
PORT 7810
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (Test.naveed.com) 6> view params rep1
-Replicat group-
replicat rep1
–target database login –
USERID GG_ADMIN, PASSWORD GG_ADMIN
–file for dicarded transaction –
discardfile /home/oracle/golden_gate/discard/rep1_discard.txt, append, megabytes 10
–ddl support
DDL INCLUDE ALL
DDLERROR DEFAULT IGNORE RETRYOP
–Specify table mapping —
MAP NAVEED.*,       TARGET NAVEED.*;
GGSCI (Test.naveed.com) 7>

Thanks it worked, I m able to start both extract and replicate process.
But when i create a new table and do some DML it is not getting replicated in the TARGET DB?
Source
GGSCI (prod.naveed.com) 1> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
EXTRACT     RUNNING     EXT1        00:30:52      00:00:10
GGSCI (prod.naveed.com) 2> view mgr
ERROR: Invalid command.
GGSCI (prod.naveed.com) 3> view params mgr
PORT 7809
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (prod.naveed.com) 4> view params ext1
--extract group
extract ext1
--connection to database
userid GG_ADMIN, password GG_ADMIN
--hostname and port for trail
rmthost prod.naveed.com, mgrport 7809
--path and name for trail
rmttrail /home/oracle/golden_gate/dirdat/lt
--DDL support
ddl include mapped objname NAVEED.*;
--DML
table NAVEED.*;Target
GGSCI (Test.naveed.com) 3> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    RUNNING     REP1        00:00:00      00:00:02
GGSCI (Test.naveed.com) 4> view params mgr
PORT 7810
USERID GG_ADMIN, PASSWORD GG_ADMIN
PURGEOLDEXTRACTS /home/oracle/golden_gate/dirdat/ex, USECHECKPOINTS
GGSCI (Test.naveed.com) 5> view params rep1
--Replicat group
replicat rep1
--target database login –
USERID GG_ADMIN, PASSWORD GG_ADMIN
--file for dicarded transaction –
discardfile /home/oracle/golden_gate/discard/rep1_discard.txt, append, megabytes 10
--ddl support
DDL INCLUDE ALL
--Specify table mapping
MAP NAVEED.*, TARGET NAVEED.*;Source
SQL> conn NAVEED/NAVEED
Connected.
SQL> create table tab_1 (id number,rnd_str varchar2(12));
SQL> insert into tab_1 values (1,'test_1');
SQL>commit;
SQL> select * from tab_1;
        ID RND_STR
         1 test_1Target database:
SQL> conn NAVEED/NAVEED
Connected.
SQL> select * from tab_1;
select * from tab_1
ERROR at line 1:
ORA-00942: table or view does not exist

Unable to start Hyperion EPM Architect - Process Manager after upgrade

Hi All,
I'm unable to start Hyperion EPM Architect - Process Manager after upgrading from EPMA 11.1.1.3.0 to 11.1.1.3.03. I get the following error in the Event Viewer.
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database version mismatch: Hyperion.SessionManager schema version is 9.5.0.0.0.10, database schema version is 9.5.0.0.9.1.
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer..ctor(NameValueCollection settings)
at Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize(String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout)
at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String jvmPath, String classPath, String ctgLibPath, String cssConnInfo, String hubHost, String hubPort, Boolean enableNestedGroups, String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean restorePastInstanceSessions, Boolean ...
I've run through all the steps of patching EPMA ran the Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql script per the patch readme. But can't figure out where it's pulling the schema version number from. Any ideas?
Thanks,
Chuck

Hi,
you forgot to update the EPMA database. Last step in patching is:
Now, you must run the database upgrade script before starting the process manager.
Run the single database upgrade script that corresponds to your database vendor.
Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
SQL_Server_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
DB2_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
The scripts are located in the following directory:
%HYPERION_HOME%\OPatch\EPMA_11_1_1_3_01\files\products\Foundation\BPMA\Server\conf\
hope that helps.

OAS Startup OWS-08820: Unable to start oassrv process 'oassrv'.

Dear OAS Product Manager, Oracle fellows & Developer Guys,
I am using Win NT 4.0 Server, Servie Pack 5 (1280)
on Intel Pentium III 550MHz PC - 256MB ram.
8GB Hard Disk 1 with C,D,E,F drives and
another 4GB Hard Disk with G,H drives,
all with FAT.(I have got Win98 in C:)
I have got:
1) Oracle8 (8.0.4) at D:\ORANT
2) Devloper2000 at D:\ORANT
3) Oracle8i (8.1.6) at G:\Oracle8i
4) JDeveloper 3.1 at F:\JDeveloper 3.1
Then I installed OAS 4.0.8.1 at F:\OAS (after closing
all running Oracle processes) with the "Complete" option.
After reboot, I logged into the Oracle Application
Server Manager, and tried to start "ALL" as mentioned in the
documentation. I got the following message:
Site
Please wait while the command is being processed on host elysium ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host elysium.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
PANIC: YS::ERROR::BADFRAME in oassrv at line 66 of
m:\nt_4081_40bit_opt_102099\ows\srchome\ys\src\ys\yse.c
abnormal program termination
OWS-08820: Unable to start oassrv process 'oassrv'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
Nothing much is described for this error in the Error Messages section of the documentation.
Please help me out.
Anuj Patel
[email protected]

Check if there is no a pid or trace or any file that is created during the start of this kind of process and remove it and try again. As well you may check if there is a java process from the console kill it and start it.
Greetings

ERROR   ORA-12514: TNS: unable to start extract process

Hi Experts,
I have installed Oracle Golden Gate in the below environment.But unable to start extract process
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
target Site (destination):
Standalone single server - Non RAC
Oracle version 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
Getting below error in logs while starting extract process:
RECOVERY: reset to initial or altered checkpoint.
2012-08-05 10:34:10 ERROR   OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to
ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
2012-08-05 10:34:10 ERROR   OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS
ABENDING.[oracle@ ggate]$
Getting below error while connecting with asm instance directly:
[oracle@ admin]$ sqlplus sys@asm as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
[oracle@ ~]$ tnsping asm TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 05-AUG-2012 11:55
:42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx-
scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = +ASM1)))
OK (0 msec) Any help Please ?
Regards
LazyDBA
Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM
Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:36 AM

Hello JK,
Thanks a lot for specific response.
SQL> select INST_ID, NAME, VALUE from gv$parameter where name like '%_listener%';
INST_ID NAME VALUE
1 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data1-vip)(PORT=1521))))
1 remote_listener xxxdata-scan:1521
2 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data2-vip)(PORT=1521))))
2 remote_listener xxxdata-scan:1521
If I add REMOTE_LISTENER pointing to SCAN ip address, Does it require DB bounce ? (Its production DB)
Regards,
LazyDBA
Edited by: LazyDBA11g on Aug 10, 2012 12:01 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:48 AM

Calling BPM Sub Process from another BPM Process - Stuck at Sub Process

Hi
JDeveloper 11.1.1.6, BPM 11.1.1.6, WLS 10.3.6
I am trying to Call a BPM Process from another BPM Process. Both the processes are defined in the same BPM Project.
Both the Processes have 'None' Start and End activities.
The 'Parent Process' has a 'Call Activity' which calls the 'Sub Process'.
The Sub process takes a parameter of payload object as input and returns output (also same payload object)
I have passed the payload object from parent to sub process in the 'Data Associations'.
The Start and End activities in the sub process also have the data associations set where I am passing the payload object from parent process to child process.
When I run the process and see the Enterprise Manager console - Audit Trail / Flow tabs,
Flow Tab - The progress of the process is showing only till the Calling of the sub process in the Parent Process. It does not show the Sub Process.
Audit Trail Tab - Shows that the Sub Process is called but has not reached to the End of the Sub process.
The audit trail does not have links to the sub process activities.
I cannot see any exceptions as well in the audit trail.
How can I find out why the process is stuck? Or what is going on in the process?
Please let me know if my explanation is not clear?
Thanks for any help
Regards
Sameer

Thanks for replying.
I have another Sub Process with Start and End events as Message Events and used Send Task and Receive Task (Implementation : Process Call) in the Main process to invoke the sub process asynchronously.
Then, the Sub Process is shown in the 'Flow Trace' as child of the main process.
In this particular one, I used 'Call Activity' to call the sub process.
So the Audit trail is showing the sub process as a child.
But what I was trying to say is that the audit trail did not have links to the entries in the 'Event' column (in Enterprice manager - instance window). (like Instance entered activity, Instance left activity etc).
I was intending to use these links to see the payload information and try to debug if there is any problem with the code.
The actual problem I was trying to say in the post is that, even after the user responds to the activity (User Task - Approval) in the Sub process,
the audit trail is not proceeding further.
In the Sub process definition, after the user task, there is End with none implementation.
Hope it is clear now.
Thanks and Regards
Sameer

Concept of Sub Process and Starter Process in BPEL

Hi Forum -
With my limited understanding of BPEL I have found that if a process has to interact with another process it has to be exposed as a service however that is not good in all cases.
Is there a way in BPEL where once can create a process and do not expose it as service and still be able to call it from another BPEL process.
For example there can be a process called sendNotification and all the other processes if they want to send a notification can call this process.
In TIBCO there is a concept of Starter Process and Sub Process. A Starter Process is a process which will wait for an event to take place, like a web service request or a JMS message or a database adapter event and then this main process can call a sub process, just like the main program calling a function. This sub process need not be defined as a service in TIBCO and it can still accept an xml schema type as input.
Is this possible in BPEL?
Thanks!

10g -> Every process is a service.
11g -> Create a Composite, You could wire multiple BPEL Components and expose only the desired ones as a service through a mediator or directly the bpel. Mediator provide one more layer of virtualization and hides even the first master bpel component.
But if the send notification have to be reused outside the composite, it has to be an exposed service. Although it is exposed as a web service, it uses only WSIF binding to interact between bpel processes and not a soap binding(unless specifically instructed).
If you are looking for function kind of construct, you could create custom xpath functions (like logging etc.)
-Sridhar

Unable to start from sub process

Similar Messages

Maybe you are looking for