Unable to store job at printer - Disk is not present ot is full

I have an HP Laserjet 3005dn with 80mb of memory and the RAM Disk is full.  How do I clear it or reset it?

Hello,
Thanks for the post.  I did find an older thread on the HP Forums that addresses this symptom.  I've included below.  I hope this helps.......Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/Laserjet-5550-printer-insufficient-disk-space/td-p/84...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

  • Job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name

    Experts,
    Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
    job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
    Thanks,

    You are probably installing on a hardened machine.
    The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
    1- the library name is libX11.so.4 and
    2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
    You can check the results running <server-root>/bin/base/jre/bin/jre
    Hope that helps and sorry about my poor english.

  • When I try to print my book I receive the following error message:  One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images.

    When I try to print my book, I receive the following error message:  One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images.  I don't understand what this means since all the photos are in the book.  Can someone please clarify?

    When you look at the images in the browser, do you see any arrow icons on your thumbnails? Like these:
    When you import your images from a folder on your system drive, you have two ways to import:
    Managed: Import and store the images in the library
    Or referenced: Leave the images in the folder outside the Aperture library.
    This is controlled by the "Store Files" settings in the Import panel:
    If you did not set "Store files" to "In the Aperture Library", the originals will stay in the folder outside.
    The error message you get, suggests that Aperture assumes the original files are in a folder outside the library.
    Select one of your images in the Browser and use the command "File > Show in Finder" - is this command available or dimmed out?

  • Unable to save PDF. The disk used for temporary files is full.

    I just started getting the "Document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk" message.
    I am running Windows 8. I've seen fixes for this on the Internet for previous versions of Windows on the Internet, but haven't seen one that works for Windows 8. Help, please.

    Same problem here. Any ideas?
    Saving with Shortcut "CRTL+SHIFT+S" works just fine.
    Using IE 11.0.9600.17728 and Adobe Reader 11.0.10

  • Palm Installation Disk does not present tutorial page

    I installed the Palm software and synchronized with my new TX, using both my PC (Windows XL) and iMAC (Mac OS 10.4.11).  Now when I put the disk in the PC, I get the messages that include opening the tutorial.  When I put the disk in the iMAC, nothing happens--I can access the document files or I can reinstall the software, but all I want is to get to the tutorial.  Please Help.  vlee
    Post relates to: Palm TX

    Hello!
    The autoplays for windows and Mac are different.  When the disk is in the Mac, open the Egnlish folder and then Doccuments.  The TX_Getting Started.pdf and TX_Read This First.pdf files should be what your looking for.
    Post relates to: Treo 650 (Unlocked GSM)

  • Error: Selected disk does not exist (21) Module-SRE-700

    Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin     
    Keyfile Size 202814577 over limit 32768 will not burn into flash
    ServicesEngine boot-loader> verify                                            
    Loading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    Unrecognized command
    ServicesEngine boot-loader>                                                   
    #service-module sm 1/0 session
    Trying 172.20.245.1, 2067 ... Open
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Trying to reset Service Module SM1/0.
    May  7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    þ
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    ú
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  

    Hi,
    Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
    1. uninstall existing SRE-V software
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
    2. run sm-hw-util to set sata mode to IDE
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
    3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
    ip route 255.255.255.255 SM slot/0
    4. install WAAS:
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

  • Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

    Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

    The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
    To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
    If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

  • Unable to disable Cover Page printing on automatic billing jobs

    Unable to disable Cover Page printing on automatic billing jobs

    Hi
    Goto VV32 for your billing output type. Double click on your condition record for this output type. On next screen we can find "SAP cover page", select 'Do not print' here.
    try and revert

  • Printer installed but not responding to print jobs

    I'm not quite sure how to intelligently ask this question so let me describe what happened.
    I have a friend who asked for help in troubleshooting a problem with his printer.  His printer is a brand new HP Officejet 6600 sitting near his computer and is on his wifi network.  He can not print to it wirelessly from his iMac running Lion, but his wife can print wirelessly to it from another room on her iMac.  He can print using USB, though, but he prefers wireless because of the wiring situation in this room.  Plus, he bought for wireless printing.
    When I got there I checked his System Preferences:Print & Fax and confirmed that his printer was installed and had the green idle light showing ready for a print job.  I tried to print and everything looked normal and showed that the job was sent to the printer and was 100% completed but the printer never responded.  I tried it from his wife's computer and confirmed that she was able to print a page with no problem.  I brought my MBP and joined his wifi network and added his printer and was also able to print.
    So, I tried some basic troubleshooting steps trying to print after each one, and nothing worked.  I deleted and re-installed his printer, repaired permissions, restarted in Safe Boot, tried printing in a second user account, Reset printing system..., deleted all com.apple.print... preferences,  installed Onyx and ran the System Cleaning routines,  powered down/up the router/computer/printer, reset the wifi on the printer and rejoined his network, and probably a few other things I can't remember right now.
    After doing all of this and throwing up my hands I tried to print again from my MBP to prove that I still could, and this time was not able to print.  It kept trying to send the job but the printer never responded.  His wife's iMac was still able to print, however.  This got me frustrated and I decided to ask this forum for help.
    Oh, and here's some more information.  His wife has a printer next to her computer, an HP Officejet something (I forget, not 6600, though).  His iMac is able to print over wifi to this printer with no problem.  What the...?
    What other things can I try? Does this point to something in the printer such as a bad wifi card, or something?  Any suggestions or ideas will be much appreciated.
    Thanks

    LilyLC, hold on to your chair you will not believe what happened today.  Bear with me while I give you all the details but you will want to read the entire story.
    First, to answer your question in the first paragraph of that last post, his wife's printer is connected to his wifi and is using the driver installed by Apple and has been updated on the same date as his computer that I gave earlier.  She can print to her printer and so can he.  After the troubleshooting steps I have taken and took today I agree with your assessment about an intermittent issue with the printer, too, but let me tell you what I did today.
    Before going to his house I decided to set up a second wifi LAN at his house using my router to check if his Airport Extreme (I incorrectly thought initially it was an Airport Express) router was the problem.  The thinking being that I have checked his printer and computer and nothing I have tried is making a difference, so the only thing left is his router.  So, I set up my router and joined his computer, printer, and my MBP, to the wifi and tried to print from both computers.  The printer still was NOT working!  That was a big disappointment since I just knew that was going to work.  I guess that eliminates the router.  I reconfigured his computer back to his wifi and proceeded to the next step.
    I hadn't installed the drivers from the website you gave me earlier since I saw in Software Updates that he had updated to that same driver set already.  Now I got to thinking that maybe those files were corrupted somehow so I downloaded the drivers from the website you gave me and installed.  Deleted drivers from Print & Scan pane and installed the newly downloaded driver, tried to print, and that failed, too.
    Next I tried your suggestion of using the LPD protocol instead of the HP JetDirect and that setup failed for some reason.  I reconfigured using the HP JetDirect, and that worked for printing, as before, but the scan function was not available, as before.
    I was getting a little pressed for time today and had time to try one more thing, so I decided to forgo the new Location setup until tomorrow and instead chose to plug his printer directly into the Airport Extreme via USB and see what happened.  I deleted the IP driver and clicked the + to add the installed driver and was presented with an HP Officejet 6600 on the top line and lower down under "Nearby Printers" found an HP Officejet 6600 series [XXXXXX] and under that HP Officejet 6600 Fax.
    I chose the first driver and installed and tried to print and was successful.  However, the scan function was not available.  So I deleted that driver and chose the second one.  I noticed immediately that the scan function was available.  Thinking I might have something I tried to print and was unsuccessful.  Mmm...printing works with the first driver but not the second and scan works for the second but not the first.  What's with THAT? 
    This was really getting frustrating by this time and after much discussion with him I told him I thought the printer was the device at fault.  For some reason his printer just did not like his network.  I tried printing to his wife's computer and that worked great.  No problem there.  But for some reason his printer did not like his network and refused to work by setting up manually.
    I recommended that he bring the printer back and exchange it for another printer.  He agreed and immediately boxed it up and left for the store.  I returned home to more friendlier surroundings.
    Here's where it gets interesting, and it helps to know that my friend is in his mid-eighties.  About an hour later he calls and tells me he's sitting in the parking lot of Office Depot.  He tells me that when he was in the store discussing with Customer Service about an exchange it dawned on him out of the blue that he DIDN'T NEED TWO PRINTERS!!  He said that if he could print to his wife's computer today then he could print to it from now on.  I was speechless!!!  I told him I asked him at the beginning of all this why he had to have two printers, and at that time he said "trust me, we need two printers".  Ok.  He tells me he has no idea why he didn't realize that wifi worked differently than cable.  He thinks that maybe since his older two printers were each connected to his and his wife's computer these newer computers operated the same way too.  But he admits to me that he was the one who set the printers up on his wifi network, so why he didn't realize that only one printer was necessary with wifi he didn't know.  He was embarrassed.  He admitted to me that technology is very difficult for him to understand.  No kidding!!!
    I didn't need to remind him how much time had been spent on this problem because he was quick to apologize and was very sorry for taking up so much of my time, and he really appreciated the effort.  I told him I didn't mind.
    And I really didn't, because I learned so much from this experience by following your suggestions, LilyLC.  I never knew how to set up a printer using its IP address, and the protocols to use, and I never knew how to add new Locations in the Network pane and why it might be useful.  You also got me to considering other troubleshooting ideas I wouldn't have thought of otherwise.  So maybe my friend and I aren't that different after all.
    I really appreciate all the suggestions, links, and ideas you offered during this effort, LilyLC.  I wish I could have determined the cause of the problem but, not knowing the inner workings of these devices, I can only assume that it had to have been the printer.
    I bet I get a call from my friend a week from now saying that he just bought a second printer for his room because his knees can't take the walking from his room to his wife's room to get all of his printouts.  All I can say is THAT printer better work.
    Thanks again, LilyLC, for all your time and help.  It was really appreciated!

  • Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database 1006.

    HI all,
    I ran into a problem with one of the servers in my DAG.  Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server.  The DAG continued to function on the other server.  So this particular
    DB01 had only some test accounts in it so I removed the database copy.  Unfortunately the removal must not have completed correctly. 
    After recovering the needed space in the partition, I tried to recopy the database and it failed.  So I deleted the entire database from the active server and it successfully removed it from the active server.  Now on both the servers the database
    is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists.  I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
    of the database (failed redundancy) but there should be zero copies.
    This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists. 
    Can you point me to the location to clean this up?
    Log Name:      Application
    Source:        MSExchange Mailbox Replication
    Date:          02/25/2011 2:00:07 PM
    Event ID:      1006
    Task Category: Service
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      email1.domain.com
    Description:
    The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
    Database: DB01
    Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB    
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Mailbox Replication" />
        <EventID Qualifiers="32772">1006</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
        <EventRecordID>181576</EventRecordID>
        <Channel>Application</Channel>
        <Computer>email1.domain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DB01</Data>
        <Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB     </Data>
      </EventData>
    </Event>

    Hi
    This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases. 
    Restarting the service will clear the cache.
    Maybe it is the simplest way to solve it.
    If it doesn’t work, you can try cmd to check it.
    Get-MailboxDatabase : Can you find the database which you delete?
    Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database.

  • Server Admin not showing jobs in print queue

    Hi All,
    I'm not sure if others are having this problem or if it's just me.  I am running Mac Server OS X 10.6.7  When I go to Server Admin and select "Print" and then "Job Status", I get a list of all the server's print queues.  In the pane below the list of queues, there is a section that says "Jobs on Queue:" which then allows me to select any specific print queue.  The problem is, no matter what queue I select, I am never able to see any of the print jobs going through the queue.  I have sent multiple jobs to different printers on the server, all while watching the "Jobs on Queue" window for the appropriate printer.  In every test, I have never seen ANY print job show up in that window, even though all the print jobs print out fine.  I have even tried pausing a printer to let jobs queue up, and still nothing shows up in that window.
    I have also tried the same tests while viewing the prints queues from the "Print & Fax" System Preferences pannel directly on the server.  Still no luck.  Everything prints out fine, but I am unable to ever see any print job hitting the queue.
    The reason I even noticed this problem is because a user accidentally printed a 500 page document by mistake.  The user called me to stop the job, but I was unable to see anything in the queue to kill.  I tried deleting the job directly from the printer, but this just caused the printer to lock up.  I would try powering off the printer and restarting it, but as soon as it powered back on, the print job would restart.  I even tried restarting the server, but as soon as the server came back online, the print job started again.  Finally, after hunting on the web, I tried logging into CUPS via http://localhost:631 and was able to see the print job listed there and finally delete it.
    Is there any way to monitor print jobs on the server in real time?  I found this previous archived thread describing what appears to the same problems using Mac Server OS X10.5.8, but there was never any solution listed before the thread was archived.
    https://discussions.apple.com/thread/2152737

    Is there anyone using printing services on a Mac server at all that could comment on whether or not you see the print jobs listed in the queue when printing?

  • OS X sends job to printer, but the printer never prints the job

    All,
    Hello. I have a Mac running OS X 10.4 Everytime I try to print a document, I can see in the Print Queue menu where it says sending job to printer, then it says completed. But no lights come on on the printer and no job ever prints. The printer is acting like it is not communicating with my MAC, but my MAC thinks it is connecting to the printer. First I tried on my local printer, then I tried on my network printer and the same thing happened.
    I tried uninstalling and reinstalling my printer but that didnt work either. I am planning on checking the CUPS log as well but since the MAC says job completed and didnt give any errors I am thinking that CUPS will not have any errors either.
    My next step is to repair disk permissions, then Reset the Printing System.
    Anyone else have any ideas? Am I barking up the wrong tree so to speak? I am not sure of the software version but I am thinking its OS X 10.4. Im going up to check now

    We're having JP's issue on a Mac here on our campus as well.
    My user is running a 2.0Ghz iMac and printing to a laserjet 8150 via IP Printing. Up until this week everything has worked fine. Now when a document is printed from any program it goes into the queue and then gets moved to the "completed jobs" with no errors reported, but no acknowledgment by the printer and no errors produced.
    Same model Macs print to this printer without issue. I tried redirecting to another lj8150 on the next floor of the building and got the same result.
    Here's what I've done without success so far:
    -Restarted the printer and Mac
    -uninstalled/reinstalled the printer
    -ensured all Mac and MS Office updates were installed
    -reset Mac Print System
    -uninstalled printer, reinstalled HP drivers for laserjets, reinstalled printer
    At this point I'm ready to start looking system issues, viruses, etc. One thing I caught just before leaving the Mac was a download of limewire filesharing software [and virus hotbed]. So I'll add that to my list of investigations.
    All other network functions seem to be operational except the printing.

  • Unable to Connect to Network Printer

    Hi,
    I am trying to install Samsung ML-1640 through my wireless router's print server feature but its not working. Whereas I am able to print through my Windows PC's on the network with no issues.
    On giving print command the print job is getting paused around 40-50% in the print que and not printing. Neither the printer is getting pinged through Network Utility.
    The printer is work fine with my MBP 13' when attached directly through its USB port.
    1) Have tried deleting & re-adding the printer through its IP with all the three different protocols LPD, IPP & HP JetDirect.
    2) Have updated to the latest drivers from here: http://support.apple.com/kb/DL905
    3) Also, have gone through the troubleshooting steps given in this article: http://support.apple.com/kb/PH11070

    Tried with your suggested steps but no luck. First I just added IP address of the router (192.168.1.1) with IPP as protocol, it did not print. Here's the error log from Print Queue for your reference;
    E [14/Feb/2013:13:03:10 +0530] [Job 1] Unable to queue job for destination "ipp://abc-macbook-pro.home/printers/Samsung_ML_1640".
    W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED printer-is-accepting-jobs attribute.
    W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED printer-state-reasons attribute.
    W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not support REQUIRED Cancel-Job operation.
    W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not support REQUIRED Validate-Job operation.
    W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED job-id attribute.
    Then, added the printer with 192.168.1.1:631 as IP address and again no luck. Here's the error log;
    W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED printer-is-accepting-jobs attribute.
    W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED printer-state-reasons attribute.
    W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not support REQUIRED Cancel-Job operation.
    W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not support REQUIRED Validate-Job operation.
    W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED job-id attribute.

  • Unable to connect to Canon printer MG4270 by one particular MacBook Pro

    Dear friend,
    MacBook Pro bought in  mid 2010, Intel Core 2 Duo, OS X 10.9.4 (13E28)
    The OS X was re-installed after the disk was erased.
    The Canon printer MG4270 was connected to the Airport Time Capsule using WiFi.
    Through Apple Store, Canon Inkjet printer software update V3.0 has been installed.
    Canon IJ Network Tool V4.4.0 has been installed.
    When I add the printer, the printer cannot be connected. See the captured image.
    I have  2 other MacBook Pros of newer models; they can connect and print to the printer. One of them is just purchased 2 weeks ago. I have successfully installed the printer.
    Thanks,
    Danny

    Hi there chow098,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    -Griff W. 

  • Cancelled print but will not cancel and comes back on to print same job

    cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

    Hi,
    From the Control Panel, open Administrative Tools and select Sevices.  Browse down to the print spooler service, right click it and select Properties then click on the Stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Restart the computer and you should find the job has been removed.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for