Unable to sysnc converted video

Hi All,
i am writing my own converter in .Net. I can able to convert the files to mp4 successfully, but unable to sync them with IPhone. it is giving the error as *"was not copied to the iPhone because it cannot be played on this Iphone"*
these are the parameters passed while converting the video. could you please help me in using the specifications.
myJob.pszAudioCodec = "aac";
myJob.nAudioChannels = 2;
myJob.nAudioBitrate = 96; //96kbps
myJob.nAudioRate = 44000;//44khz
myJob.pszVideoCodec = "h264";
myJob.nVideoBitrate = 900;
myJob.nVideoFrameRate = 30;
myJob.nVideoFrameWidth = 640;
myJob.nVideoFrameHeight = 480;
Are the above parameters are correct???
Thank you,
Naresh Bojja

Hi Naresh Bojja,
You'll have better luck getting help with .Net developer support on a .Net support site.
I don't know what's going wrong with the application but the iPhone supports the following video formats.
+Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats+ http://www.apple.com/iphone/specs.html
-Jason

Similar Messages

Converting videos in iTunes to play on iPod 5G

I searched some answers about converting videos to play on my ipod touch 5G. I used Any Video Converter and it reduced my video to play on my iPod, but it seemed to distort the video. I used the highest resolution. I downloaded HandBrake, but I need to read the manual for it does not seem as easy as AVC.
I could swear in the past I was able to play my large video within iTunes and convert in into a smaller video, but I no longer see that option in any menus.
Am I missing something?
Any hints?

I use HandBrake., It has preset outputs for iPod.iPhone and iPad too.
Also see the following. There an option in iTunes to convert for iPhone/iPad.
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos

Unable to add music videos file to itune for my iphone

Hi... I am unable to add music videos file to my iphone through itunes as i have added a file to library from the files menu of the itune 10 but still i am unable to have the music videos please help. Mp3 file are working very well but unable to add music videos that i have converted in to iphone mp4 format please help out thanks...

Solved. I changed the iT folder and my iP got lost the connection with the proper library. Had to change it back and re-connect to the correct library.

I am unable to add home videos to my itunes library

Ever since I updated Itunes to the latest version I have been unable to add home videos that have been converted to the proper format into my Itunes library so that I may sync it with my mobile device. Can you tell me why? What needs to be done so that I am able to so again?

does it say your nano has no more capacity left? Your itunes should have a bar at the bottom of the screen to let you know how much space is taken up.

Converted video in iTunes but it won't sync to iPad

Usually, I convert videos for my iPad or iPhone using Toast and it works fine. Today, I had an mp4 video and I just dropped it into iTunes where it will play there just fine. However, it will not sync to my iPad. So, I went into the iTunes Advanced menu and had iTunes convert it for the iPad. Even that video will not sync to my iPad. I don't get it. I just converted it with Toast and now it will go on my iPad thru iTunes. I don't get why it doesn't work when iTunes converts it.

Video is a pretty complicated subject. I take it this video wasn't from your normal source so who knows what combination of audio and video codecs were made to produce the thing. I also don't know how iTunes processes video. Some converters can just pass through components and not really re-code them, and maybe iTunes did that to something that to something that really needed re-coding. Maybe you'll find tips at:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

Unable to play recorded video using BB multimedia api in other platform

Hi all,
I am new to Blackberry application development. The application I am developing it is required to record a video using multimedia api.
I am using
video encoding : MPEG-4
audio encoding : AMR
res : 320 x 240
Device using Curve 8250
It is the same encoding combination BB curve use to record a video from default recorder.
_player = Manager
.createPlayer("capture://video?encoding=video/3gpp&width=320&height=240&fps=12&video_codec=MPEG-4&audio_codec=AMR");
After recording it from my application I am able to play the video in vlc even in BB devices. But when I am trying toplay in android,J2ME and iPhone platform. It is unable to play the video..Can anybody help me out in this regard.
I am really in trouble. I need your help .
Thanks in advance.
Regards,
Angan

In my experience if windows media player plays it(the mpeg4), it will not be compatiable with quicktime. At least if you do not go installing the codecs to read ISO mpeg 4 (.mp4 is the standard extension that quicktime puts on the files). Another thing to check is if you are creating ISO compliant files. The mpeg4s that windows media reads by default are not ISO compliant. You also need to keep in mind that Quicktime is a simple profile mp4 and main profile mp4 player (although not all b frames are compatable with quicktime). See http://en.wikipedia.org/wiki/Quicktime for a basic overview of the profile support. I suggest that you try playing the media with free softwares such as vlc http://www.videolan.org/vlc/ and mplayer http://www.mplayerhq.hu/design7/news.html and check that the format and codecs are correct. Although they will play non standard files they will list the codecs in use (make sure that you are using ISO compliant standards as you can put more than MPEG 4 in mp4).

Unable to read DVD video

I unable to read DVD video discs, although I can read DVD-R and CD.
I try to change the region using regionset but with no change.
here is the output of vlc, when I try to open DVD:
VLC media player 0.8.6b Janus
libdvdnav: Using dvdnav version 0.1.10 from http://dvd.sf.net
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Could not open /dev/hdc with libdvdcss.
libdvdread: Can't open /dev/hdc for reading
libdvdnav: vm: faild to open/read the DVD
[00000291] dvdread demuxer error: DVDRead cannot open source: /dev/hdc
[00000294] vcd access error: could not read TOCHDR
[00000294] vcd access error: no movie tracks found
[00000294] access_file access error: file /dev/hdc is empty, aborting
[00000294] cdda access error: could not read TOCHDR
[00000294] cdda access error: no audio tracks found
[00000289] main input error: no suitable access module for `dvd:///dev/hdc'
[00000278] main playlist: nothing to play
signal 2 received, terminating vlc - do it again in case it gets stuck
[00000278] main playlist: stopping playback

whats in your
/etc/fstab
yours is probably
/dev/dvd /mnt/dvd auto ro,user,noauto,unhide 0 0
mine is
/dev/dvd /mnt/dvd udf,iso9660 ro,user,noauto,unhide 0 0
i had issues with some dvd's till i changed from auto to udf

Unable to watch rendered video

I can watch video in real time preview on out monitor but unable to watch rendered video. It is just like a unsynchronized video. What may be the cause?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Unable to Display This Video

Watching videos at nbcnews.com, some days get message: Unable to display this video. The ads always display, but not the stories. And only some days. Why?

You're right that when the apps are available they work better than Safari. I can't find one for The Last Word, which is my favorite show. And like I said, the problem seems to be intermittent, so I don't believe that its a Flash issue. Actually, it's been a couple of days now since I could view The Last Word, so perhaps they are doing something different with their coding than before.
Thanks for your suggestions... They are helpful. :-)

Unable to remove a video

I am unable to remove a video from my iPhone when I sync it using iTunes. The video is unchecked in iTunes and I have even gone so far as to delete it from my iTunes library.

Have you tried to turn your phone completly off and back on since syncing with the video unchecked? (http://support.apple.com/kb/ht1430)

How to put / convert videos onto my Ipod classic

I´m a newbie and so I dont know, if this question even came up. So I tried sevweral things to convert my videos (made by myself with my camcorder, mpeg format in PAL)and it works on the on the computer with Quicktime but it always has the same message for in itunes: cant copy format, casue my ipod cant play this format. Tried to convert it with itunes as well, no luck.
I had an Ipod touch for a short time, there it works, so what is the problem with the classic or what am I doing wrong????? I have all this memory now and cant use it :-((((
THX for all the help! Peggy

GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

I am unable to watch Youtube videos on Firefox ?

I don't know why I am unable to play Youtube videos on Firefox (this problem stated around mid Sept. 2014).
I explored many solutions but in vain. Firefox/flash (I am not sure) is behaving weirdly, I found some solutions on 'Mozilla Support' when I apply these, I am able to play YT videos but after some time (usually after a re-boot) I get the screen "An error occurred please try again Later" and this cycle repeats. I use a public Wifi/LAN of my university and everyone(using Firefox) has the same problem, and everyone noticed the problem at the same time.
Some solutions I tried are:
1. Deleting Cache, Cookies, History etc etc
2. Uninstalling and Re-installing Firefox and flash.
3. I do have the latest version of both flash and Firefox
4. Using Firefox in safe-mode (Sometimes even in safe-mode I couldn't play YT videos)
5. Disabling Hardware Acceleration (though I use a I5 machine with Windows 7 and Intel(R) 3000 Graphics card).
6. Tweaking DNS settings (changed my DNS server address to 8.8.4.4 etc)
7. Degrading to previous versions of Firefox (I used FF 28.0 in Linux worked fine for a while and then the problem repeats itself)
I am confused, I am not sure where the problem is, because I use Linux(Ubuntu 14.04) and Windows 7 and in both of them Firefox won't play YT videos but Chromium/Chrome does. As I said before videos would play for certain time and then they would stop playing giving me "An error occurred please try again Later......". Another observation is there were only 2 resolutions (1020p and 240p ) available and the result won;t change even if I change them.

Hi, first of all Thank you for your instant response.
Yes, I have updated to version 33, Now the problem is not as random as it was before. I found that I have absolutely no issues when I use FF for the first time after starting my computer. At this point there is no issue at all I can watch videos when both logged-in/logged-out and also they work perectly if I switch between flash and HTML5.
But as soon as I restart Firefox I cannot watch the videos at all. No matter if I am logged in/logged out, I did try HTML5 but still it didn't work. The error message was same in all the cases "An error occurred, please try again later".
We are secured by "Cyberoam" so I don't have access to proxy sites.
By the way these observations are for Windows 7.

Unable to load youtube videos. Neither browsing nor the youtube app are working, this hapenned after I updated to iOS6

Unable to load youtube videos. Neither browsing nor the youtube app are working, the video start loading but nothing more happen. This issue is hapenning after I updated to iOS 6.

Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
And then try this.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
And ... Are you using the mobile YouTube website?
http://m.youtube.com/home

How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
The answer depends on the type of video files you want to convert. If they are DRM protected commercial videos, no help can be given here. Google.

I am unable to initiate a video chat on facebook from a pc to a new ipad mini. Is this possible and do I need a special app on my iPad?

I am unable to initiate a video chat on facebook from a pc to a new ipad mini. Is this possible and do I need a special app on my iPad? Receivew a message on the PC after request a video chat with the iPad that the connection is too slow and the iPad does not show an incoming video. JMaruje

A Mac Mini s a computer you can use with the iPad.
YO do not need a computer fro backup since yo can backup to iCloud.
However, sometimes software glitches occur and require connecting the device to a compute to restore vi iTuunes.
You can control a computer via an iPod with an app like TeamViewer or LogMeIn. There are others too.
You can also use an iPad a a SECONDAY monitor for a computer. with other apps.
You need a dedicated monitor, keyboard and mouse to setup the Mini. You can use a PC USB mouse and keyboard.

Unable to sysnc converted video

Similar Messages

Maybe you are looking for