Unable to text to 1 number
Iam unable to text just 1 number in my phone but can receive from this number
A similar error I am getting whie exectuting Early watch report in Solution manager.
The current ABAP program "/1AGS/AEWAFS_CONTENT_II____005" had to be terminate
because it has
come across a statement that unfortunately cannot be executed.
Runtime Errors CONVT_NO_NUMBER
Termination occurred in the ABAP program "/1AGS/AEWAFS_CONTENT_II____005" - in
"ACTION_005".
The main program was "SAPMSSY1 ".
source code extract as follows.
failed at routine
form action_005 using ps_stdparameter type dsap_form_parameter.
loop at lt_cpu_figures assigning <cpu>.
lf_total_cpu = lf_total_cpu + <cpu>-field3.
lf_count = lf_count + 1.
if <cpu>-field2 > lf_peak_cpu.
lf_peak_cpu = <cpu>-field2.
endif.
at end of field1.
lt_check-field1 = <cpu>-field1.
lt_check-field2 = lf_peak_cpu.
check lf_count > 0.
lt_check-field3 = lf_dec = lf_total_cpu / lf_count.
append lt_check.
clear: lf_total_cpu, lf_peak_cpu, lf_count.
endat.
endloop.
referred SAP note 1627192 and it is already included in my system.
Could anybody suggest on this issue.
Similar Messages
-
Hi
any one any suggestions as to why i am unable to text one particular number uless connected to WiFi?
When this number texts me it comes through as their email address, even though they are in my contacts with the phone number. I have deleted the number and re input ....
ThanksSounds like a setup problem on their end.
-
I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?
PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it. -
Unable to text to a phone number not in contacts
On my Z10 I'm unable to text to a phone number unless I first add it to my contacts and attempting to do so causes the software to crash. I text numbers that I don't necesarilly want to add to my contact list so any fix for that?
Hello. Have you tried rebooting your BlackBerry device?
If you have an answer to your question then please click “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit.
BB 8700 -> Bold 9000 -> Curve 8520 -> Bold 9700 -> Curve 9320 -> Bold 9900 -> BlackBerry Z10 + PlayBook 64 GB Wi-Fi -
I have 2 people in my contacts that I'm unable to text. The SEND button does not respond
I Have 2 contacts that I'm unable to text to. The SEND button does not respond. Other contacts will send message.
Hi Gaylene1949,
So the issue is isolated to two contacts only.
There are a couple sections in this article for troubleshooting contact specific issues.
iOS: Troubleshooting Messages
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
and
If you still can't send or receive SMS, follow these steps
Make sure that the contact who's trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that you're using the area code with the contact's phone number. When sending messages internationally, you also need to use the contact's international code.
If you're using a "Pay as you go" SMS plan, make sure it has enough available balance. Contact your carrier if you're unsure of your SMS plan or the available balance.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Thank you for using Apple Support Communities.
Nubz -
My phone will not text just one number. How do I fix it? Help, please!
I cannot text one single number. I receive his texts, but cannot send out. I have tried everything I have come upon. Verizon was unable to help me in the store, they were boggled as to what it could be. I turned iMessage off, reset, turned it back on. Deleted the contact. Switched the number and texted the individual number. We can call back and forth, no problem. Any info would be helpful, since nothing else is working.
Maybe the issue is with the other person, since you can text everyone else.
-
Nokia 6288. Was able to text okay yesterday. Today unable to text message being stored in out box and message invalid multimedia settings. Had phone since July last year and no previous problems. Settings have not been changed. Any one got any ideas how to rectify.
Thanks in anticipation.Are you on the 3 network?
There have been problems with the 3 version of the phone software on 6233, 6280 and 6288 - basically, they keep losing the message centre number.
Go to Menu, Messaging, Message settings, Text Messages, Message centres, Add centre. Then set the message name to 3b and the number to +447782000800 (assuming you're in the UK, check with three in your country if not) then Save and set 3b as your default centre. -
[SOLVED] Unable to determine major/minor number of root device - USB
I installed Arch on a USB harddrive of mine from within VirtualBox with the intention of running the installation (via the drive) on a laptop in my house. I passed through the drive through by creating a special vmdk (here - it's for "expert users only". ) and installed Arch on it by booting off the Arch 2011.08.19 iso and following the instructions. I do recall the installer complaining because /sbin/mkinitcpio was missing, so I copied over the one from the host (which is also an up-to-date Arch system). After that, everything worked and I was able to boot the drive within virtualbox.
Then I went and plugged it in to another laptop in the house and, surprisingly (for me at least), it got past GRUB. My joy was short-lived, because it failed just a bit later:
:: Running Hook [udev]
:: Triggering uevents...done.
ERROR: Unable to determine major/minor number of root device 'Waiting 10 seconds
for device /dev/disk/by-uuid/[the uuid] ...
/dev/disk/by-uuid/(the uuid)'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[ramfs /]#
So I googled around for a while and plugged it back in to my computer, booted it up in virtualbox, and added "usb" to the HOOKS array right after udev in /etc/mkinitcpio.conf. Then I rebuilt the initramfs:
# mkinitcpio -p linux
So I plugged it back into the laptop, booted it, and got the same error.
Later, in an attempt to isolate the problem, I removed "sata" from HOOKS, ran the same mkinitcpio command again, and rebooted the VM. I got what looked like the same error as the one above. yay. So I guess the usb hook isn't being loaded or something like that. (I've since added the "sata" hook back and rebuilt the initramfs so I can mess around in the VM )
I've tried removing autodetect from HOOKS (saw that in some threads) and trying different USB ports on the laptop, but nothing seems to be working. I also checked to see if virtualbox was providing a bogus uuid or something, but the one it's specifying seems to be correct - I looked in my computer's /dev/disk/by-uuid and it matched.
Info on the drive (first partition is /boot, second is swap (derp!), third is /, and fourth is /home):
# sudo fdisk -l /dev/sdg
Disk /dev/sdg: 500.1 GB, 500107861504 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00016b3d
Device Boot Start End Blocks Id System
/dev/sdg1 * 63 208844 104391 83 Linux
/dev/sdg2 208845 4417874 2104515 82 Linux swap / Solaris
/dev/sdg3 4417875 209230559 102406342+ 83 Linux
/dev/sdg4 209230560 976768064 383768752+ 83 Linux
Screengrab of my VirtualBox storage setup (just for giggles):
My /etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
# Tried this line instead -- didn't work either
#HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"
HOOKS="base udev usb sata filesystems"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
My GRUB menu.lst:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by UncleNinja (2011-12-02 15:33:21)UncleNinja wrote:
skunktrader wrote:https://bugs.archlinux.org/task/27385
Perfect! Thank you!
Would it be safe to copy over the version from HEAD into my mkinitcpio?
EDIT: nevermind, derp derp the package is updated
EDIT again: Actually, it's not.
I copied over the init_functions in HEAD into /lib/initcpio/init_functions and rebuilt the initramfs. It worked!
Thanks guys!
Last edited by UncleNinja (2011-12-02 15:35:20) -
I'm getting this message " We are unable to validate this serial number for Lightroom . Please contact Customer Support " when installing on my Mac
contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html
-
I bought the CS6 Design Standard student and teacher edition over amazon. I activated the product on my adobe account and got a serial number. But when I install the package and enter the serial number I a message saying "We are unable to validate this serial number for Creative Suit 6 Design Standard. Please contact Customer Support."
Does anyone know what is up with this? I am sure that the problem isn't anything along the lines of making mistakes when typing in the serial (tried it multiple times, used copy paste to reduce chance of error). It's also not any problem with me lacking an internet connection adobe to validate the serial.Serial number questions can't be handled on the forums. You'll need to talk to Customer Support either by phone or web chat.
http://helpx.adobe.com/contact.html -
I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation. When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.
Hi Tom,
kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
For serial number message try:
Error "Invalid serial number" | Acrobat 9 | CS4
Thanks,
Atul Saini -
I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""
Hi islandschool,
Please try the suggestion given in the link:- http://helpx.adobe.com/creative-suite/kb/unable-validate-serial-number-ccm.html
Regards,
Sarika -
I purchased a download version of Lightroom 6 from Amazon and when i write the license key number i'm getting this message " We are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "
contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html
-
I have a Mac. I purchased a adobe photoshop elements 12 program in a Sam's Club Store. When I tried to install it the program said We are unable to validate this serial number for adobe photoshop elements 12. Please I need your help as soon as possible to resolve this issue and then, use my purchased product.
then you are using the wrong number or there's a connection issue. your serial number is 6 groups of 4 numbers.
if that's not the problem, Sign in, activation, or connection errors | CS5.5 and later -
Error: Unable to interpret / as a number
We have an R/3 Infoset that is used as a source for some Crystal Report queries -- basically it is pulling some revenue recognition data from GLPCA and pairing it with supporting tables such as billing documents, orders, customer, material, etc. This has been available in Production for a few months, but recently a user has started encountering the following messages at runtime:
Crystal Reports
Failed to retrieve data from the database.
Database Connector Error: 'Unable to interpret / as a number.'
Database Connector Error: 'RFC_INVALID_HANDLE'
So we were able to even track down the error to one specific billing document and can recreate the error when selecting only the one document number. The report errors whenever it pulls that data and if a certain amount field is brought in to the listing. Looking at the underlying data through an SQL query, we don't see a problem with the data and have been unable to figure out why only certain records are causing this short dump. The abend info in ST22 shows it is related to a CONVT_NO_NUMBER runtime error in ABAP program /CRYSTAL/SAPLFLAT - procedure /CRYSTAL/BUILD_STRING. Looking through the details did not uncover much information that would point to the problem.
Has anyone encountered this type of problem with Crystal integration to SAP data? Any suggestions on troubleshooting or identifying the problem would be appreciated.Hi,
would suggest you open a case with support and provide the details on the steps so that the support folks can directly look at your system.
thanks
Ingo
Maybe you are looking for
-
How to get the unicode escapes for characters outside a characterset
Hi! I'm tryiing to edit into a RTF file and have been fairly successful so far. But living outside the U.S i need some characters outside ASCII. Those characters are supposed to be escaped as unicode-escapes, eg \u45. But I can't find a way to get th
-
Workflow Circuit between FCP and After Effects with HDV
I am trying to set up a workflow circuit with FCP 5.1.1 and AE 7.0 using HDV. We are: 1. building sequences with FCP 2. exporting to AE 3. adding in FX with AE 4. putting those back into FCP The footage we are using is compressed with HDV 1080i60 in
-
when i try downloading the report in ALV ..it says field symbol not assigned and gives dump!! pls help!!
-
Canon EF 70-200mm f/4 L USM not as sharp as myCanon EF 100-400mm f/4.5-5.6L IS
Hi can't seem to get a sharp a image with my 70- 200 as I can with my 100-400mm. Should I be getting just as sharp photos with both lenses. I still have a warranty with best buy. Solved! Go to Solution.
-
Putting a Photoshop-made slideshow on iPhone.
I made a music/photo slideshow using PhotoShop and it was automatically saved as a Windows Media File. It opens and plays using other players - Windows Media, RealPlayer, etc. Can it be converted to import into the iPhone?