Unable to trade in Galaxy S3 for $100 min

I was successful in trading in my iPhone 2G, however my mint condition Samsung Galaxy S3 topped at $60 when doing a trade in and $50 if doing recycle.
I checked the trade in website and it stated that there is a $100 minimum for trading in either a galaxy s3 or a note II.
Any thoughts on how I can get the $100?
This is the page :
http://www.bestbuy.com/site/electronics-promotions/online-trade-in/pcmcat133600050011.c?id=pcmcat133...

Hello Aacidus-
I apologize for the lateness of my response; we are currently backlogged and trying to catch up. I’m sorry to hear that you weren’t able to successfully trade-in your Samsung Galaxy S3 for the $100 gift card promotion.
Without being there, I am not sure what the issue was, though I can only assume that the store may have been looking at the wrong promotion. We do insure that the stores have all the correct information to process these offers and I will document your concerns for our upper management to review. As this promotion ended on 11/29, we are no longer able to offer it to our customers.
I apologize for any disappointment that this has caused you.
Sincerely,
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

JMS unable to connect MQ after idling for 10 min

Hi,
I have come up with a working Async/Sync interface which is MQ->XI->RFC->CRM and CRM->RFC->XI->MQ again.
I sent several messages to create tickets in CRM and CRM created the tickets successfully and sent back reponses back to MQ. MQ received the reponses messages.
The problem is that after sending the messages, I waited for 10min or so and I started to send messages to create tickets in CRM. The tickets are again created successfully and tried to send the reponses messages to the receiver MQ but in the Communication Channel Monitoring, error is shown:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Connector for ConnectionProfile of channel: MQ_XML_Receiver_CC2on node: 74922450 having object id: 05e949939d4c3a649aa55b273caa390b encountered error: MQJMS2007: failed to send message to MQ queue in sending to destination queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1, the message message: JMS Message class: jms_text JMSType: null JMSDeliveryMode: 2 JMSExpiration: 0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 1192218203185 JMSCorrelationID:470bb330-f40a-01ab-0000-000081b0b8e9 JMSDestination: queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1 JMSReplyTo: null JMSRedelivered: false JMSXDeliveryCount:0 <?xml version="1.0" encoding="UTF-8"?> <InvestigationUpdateXML_DT><INVESTIGATION_UPDATE><LW_INVEST_N Another 162 character(s) omitted: javax.jms.JMSException: MQJMS2007: failed to send message to MQ queue
So I have to stop the particular JMS channel and start it again in order to send messages over to the receiver MQ.
Anyone has an idea why is it so? Is it a MQ problem or JMS adapter problem existing on the XI part?
Appreciate if someone can give some acruate info to solve the hassle of restarting communication channel everytime.
Thanks in advance.

Hi,
I have identified that the problem lies with sending messages to remote queue.
For local queue, I am able to send messages anytime. Eg. sending 10 messages, wait for 30 min and send another 5. The JMS communication channel works fine.
For remote queue, I sent 10 messages and wait for just 5 min and sent another 1. The communication channel again threw out such error message again. In short, it is unable to put the message in MQ. I have to restart the com channel again, in order to send the message over to MQ.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Connector for ConnectionProfile of channel: MQ_XML_Receiver_CC2on node: 74922450 having object id: 05e949939d4c3a649aa55b273caa390b encountered error: MQJMS2007: failed to send message to MQ queue in sending to destination queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1, the message message: JMS Message class: jms_text JMSType: null JMSDeliveryMode: 2 JMSExpiration: 0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 1192218203185 JMSCorrelationID:470bb330-f40a-01ab-0000-000081b0b8e9 JMSDestination: queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1 JMSReplyTo: null JMSRedelivered: false JMSXDeliveryCount:0 <?xml version="1.0" encoding="UTF-8"?> <InvestigationUpdateXML_DT><INVESTIGATION_UPDATE><LW_INVEST_N Another 162 character(s) omitted: javax.jms.JMSException: MQJMS2007: failed to send message to MQ queue
So is there any way to configure the JMS adapter to connect the MQ as it wish with success and send the messages anytime of the day? The MQ queue admin has decided to use remote queue and it's hard to convince them to switch to local queues and I am not an expert on MQ technologies, I can't list out the pros and cons of having local queues.
Regards.
Chee Nam
PS: Appreciate if anyone can give some pointers.

Unable to trade SouthPark for Xbox 360

It looks like the incorrect item was added to the trade in website. Only the Grand Wizard edition is listed. I was unable to trade in the game last night as the UPC of the game is not the same as the UPC for the CE edition. Could someone please add this so I can trade the item. Thanks

Hello stoned99,
Thanks for posting regarding your South Park: The Stick of Truth trade-in attempt. I am sorry your experience did not go as expected.
I have reviewed our listing on the trade-in site, and it appears that while the first image does display the Grand Wizard Edition, the listing itself is actually for the standard copy of the game. This can be confirmed by searching www.BestBuy.com for the pre-owned SKU showing on the trade-in page.
The store uses a slightly different system, and it looks as though that one specifically calls out the special edition. In truth, though, all a customer would need to trade in, even with that, is the game discs, so the store should still accept your copy of the game under that listing. I would recommend you return and request that they complete the trade for you. If they are concerned about the title being different, showing them the online listing may assist them in completing the trade.
Thanks again, and please let me know if you have any additional trouble with your trade.
Best regards,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
How much trade-in value can I get from VZW or BestBuy or Amazon?
Thanks!

http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
DROID Bionic: (9/8 launch) – You already know everything about this device, don’t you?
Samsung Stratosphere: (9/8 launch) – 4G LTE device running Android 2.3
HTC Vigor: (10/6 launch) – Will replace the HTC Thunderbolt
LG Revolution 2: (10/20 launch) – Will replace the original Revolution
Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
Samsung Illusion: (9/29 launch) – 3G smartphone running Android 2.3
Samsung Plato: (January launch) – whatever it is, it was pushed to 2012
HTC Bliss: (9/29 launch) – Lower end Android 2.3 device; the chick phone?
Motorola XOOM 4G LTE: (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

Anyone else having problem getting promo code for $100 gift card??

This is ridiculous. I upgraded from an LG chocolate touch to the Thunderbolt and still have NOT gotten my promo code for $100 gift card. Is this happening to anyone else? I've called customer service to no avail. I'm supposed to get a clal back this Sunday to see if the code came through yet. This is the only reason I upgraded right now. I am not a happy customer.

We upgraded my daughter's LG ENV3 to an Iphone on 08-18-11. The salesman told us we'd be getting a promo code in 5 days by email or SMS. Still hadn't seen it by the middle of September so we started calling customer service. Over several hours, we spoke to five different people and received five different reasons why we either would get the code or wouldn't get the code, ranging from we didn't quality (false) to your email is rejecting the code that we've sent numerous times (also false). We were told that they could give us the code over the phone, but that particular person didn't know how and then we were told that the code could never be given over the phone. I finally walked into the Verizon store where I bought the Iphone and got the manager on the case. It took him 2 days talking to multiple people in Verizon, who I as a mere paying customer could not contact on my own, to finally get someone who was willing to send the code again (or was it being sent for the first time?). That problem solver somewhere in the bowels of Verizon told me on Friday, Sept. 30th that I should be getting the email any minute and to keep checking and he would call me on Monday, Oct 3rd to make sure I received it (Big surprise he never called back on Monday). On Saturday, Oct 1st I still hadn't received the email to either of the email addresses that he said he was sending it to so I started checking the boards here and realized that I was not alone in my misery. I took somebody's suggestion and sent a PM to on of the customer service people on this forum, explaining in detail my problem and still haven't received a response from her. Needless to say, Daisy at Verizon won't be receiving any Kudos from me. FInally, on Monday night I received an SMS with a working code that was accepted by the trade-in website. Hopefully, I get my $100 but I won't hold my breath. I've been with Verizon for years and currently have five phone on my account. I've had a variety of customer service experiences with them over the years, some very good and some not so good, but this $100 gift card has been a real eye opener in customer service ineptitude.

Trade iphone 4/4s for iphone 5.. true???

I heard that if you have a iphone 4/4s that you can go into any apple store and trade it in for a iphone 5 for $100 is that true?

A google search will find the answer
Apple rolls out iPhone trade-in program in U.S. stores - Yahoo News

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
Edited by: bhagav on Jan 5, 2012 1:20 PM

Hi ,
Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
check and update accordingly later .
Thanks
Kamal Mehta

Unable to find the published output for this request - problem

Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regards

Hi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

Unable to get the admin object for the CsContainerAdmin service

Hi,
On AIX, we deployed XIR2 SP2 --> XIR2 SP3 --> SP3 Productivity Pack.
The Conection server does show up on the server list in the CMC, but on trying to access this server, it throws an error" Unable to get the admin object for the CsContainerAdmin service"
Tried to manually create another Connection server, same result.
Is this an issue that is addressed by a later FP?
Thanks in advance
Rajesh Jayakumar

Hi Rajesh,
Were you able to resolve this issue? I am facing the same issue with almost every BOE 11.5 SP3 server on Windows.
For example, the Input file server says this -
"Unable to get the admin object for the FileServerAdmin service for server Input.BOCMSMSGT1.fileserver".
Getting the same error on WebI Report Server as well -
There was an error while retrieving data from the server: Unable to get the admin object for the WebiServerAdmin service for server BOPROCENG1.Web_IntelligenceReportServer.webiserver
Thanks,
Sarang
Edited by: Sarang Deshpande on Sep 26, 2008 3:08 PM

I had to trade in my iPhone for an android, I did not unencrypted the back up on iTunes, i no longer have access to the phone, is there a way to get to my data?

I had to trade in my iPhone for an android, I did not unencrypted the back up on iTunes, i no longer have access to the phone, is there a way to get to my data?

The difficulty is you have to unencrypt during the restore process, which you cannot do with an Android device.
See: http://support.apple.com/kb/HT4946

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone?

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone to send and recieve iMessages?

Sync your iPhone to iTunes, and see if that does the trick. Also you could try a Soft Reset with no Risk to Data. Holding down both the Sleep button and the Home button until the Apple logo appears and then waiting for the Reset to bring you iPhone back to the lock screen. Are you trying to add the email at Settings>Messages>Send and Receive from (2 Addresses) your iPhone number and your email address?

I'm getting this message " We are unable to validate this serial number for Lightroom . Please contact Customer Support " when installing on my Mac

I'm getting this message " We are unable to validate this serial number for Lightroom . Please contact Customer Support " when installing on my Mac

contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastian

Excellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.)

Unable to trade in Galaxy S3 for $100 min

Similar Messages

Maybe you are looking for