Unable to Translate the EDIFACT messages in Oracle B2B 11g

Hello,
    I am trying to read a EDIFACT message using B2B and translate into XML. I have Created the .ecs file and also created .xsd file out of it . I imported both the definitions in B2B and created a inbound agreement. I placed an EDIFACT file and when B2B tries to read the file through listening channel it is failing to read it. I am getting below error.
B2B-51507
Error Description    Machine Info: Data parsed by flatparser cannot be validated using guideline from EDIFACT standard.
Error Level    ERROR_LEVEL_COLLABORATION
Error Severity    ERROR
Error Text    Incompatibe data and guideline.
Please guide me if i am missing any server level setting here?
Thanks,
Nishanth

As I understand the best way to solve any technical issue is to post Service Request in metalink.
WBR
Ivan

Similar Messages

EDIFECS Mapping not found in the X12 Output file in Oracle B2B 11g

Hi,
We are using Oracle SOA suite 11g, we have created a outbound process for EDI 855 which is PO Acknowledgement.
We are using a XML Gateway for the outbound and consuming the message in BPEL. We are mapping the OAG xml to EDIFECS xml to be consumed by Oracle B2B. We had created the EDIFECS xsd and ecs file using Oracle B2B editor and got it validated.
Now the issue is we have mapped few elements in BPEL and the same data is found in the payload message in Oracle B2B, but we are unable to see the data in the X12 output file.
Any thoughts will be hightly appreciated.
Thanks
Sathish

Hi,
Thanks for your update.
The following were the elements missing in the native X12 flat file. I verified these elements present in ecs using oracle b2b document editor.
<ns0:Segment-PO1>
<ns0:Element-355>EA</ns0:Element-355>
<ns0:Element-235>UI</ns0:Element-235>
<ns0:Element-234>UPCXREF</ns0:Element-234>
</ns0:Segment-PO1>
<ns0:Segment-ACK>
<ns0:Element-355 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">EA</ns0:Element-355>
<ns0:Element-373>20100318</ns0:Element-373>
</ns0:Segment-ACK>
Thanks
Sathish

Why am I unable to use the text message feature on my Honda CRV with my iphone 6?

Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?

mspacmn wrote:
Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?
Yes, you are unable to use text messaging feature with your iPhone.
-> http://owners.honda.com/vehicles/information/2014/CR-V/features/SMS-Text-Message -Function/3
"The system is currently compatible with select Blackberry® phones with Bluetooth"

How to get the file name from Oracle B2B 10g

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

How to send SOAP Message with Oracle B2B

Hi everyone,
I need your help to send out from Oracle B2B a SOAP message with attachment of any type of file (image, pdf, etc.). Possibly using a SOA composite application or another way, it doesn't matter. I already create an ebMS partnership with a custom document protocol and I already create a working SOA composite application to send only text message to my trading partner. I have tried this solution: http://anuj-dwivedi.blogspot.it/2011/04/ebms-attachment-handling-in-oracle-b2b.html but it doesn't work for my case... It is to be noticed that I don't give any schema to my component in the SOA application explained firstly, and I select opaque as schema.
Thanks to all, regards
Nello

Hi Anuj and thanks for your help,
I need to send an ebXML message, with SOAP, and I try to send it with a .war application written in jsp connecting to http://10.85.28.24:8001/b2b/transportServlet to send the SOAP message. The errors reported is:
javax.xml.soap.SOAPException: Unable to receive message. Received a response from url: http://10.85.28.24:8001/b2b/transportServlet with HTTP status 200 and SOAP content-type: null.
the code I write is the following (to evaluate the two "null" in the super constructor)
<%!
public class EBMSSender extends SOAPRunner
private String cpaId;
private String service;
private String action;
private String mess;
private ArrayList<String> allegati=null;
public EBMSSender(String cpaId, String service, String action, String mess, ArrayList<String> file)
super("http://10.85.28.24:8001/b2b/transportServlet","null", "null");
this.cpaId = cpaId;
this.service = service;
this.action = action;
this.mess=mess;
this.allegati=file;
@Override
protected void prepareRequest(SOAPMessage soapMessage, SOAPBody soapBody) throws SOAPException
soapBody.addChildElement(SOAPUtility.createElement("CPAId", getNsPrefix(), getNsURI(),"agr3"));
soapBody.addChildElement(SOAPUtility.createElement("service", getNsPrefix(), getNsURI(),"OracleService"));
soapBody.addChildElement(SOAPUtility.createElement("action", getNsPrefix(), getNsURI(),"Oracletohermesb"));
soapBody.addChildElement(SOAPUtility.createElement("serviceType", getNsPrefix(), getNsURI(),"OracleServiceType"));
soapBody.addChildElement(SOAPUtility.createElement("convId", getNsPrefix(), getNsURI(), "convId"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyId", getNsPrefix(), getNsURI(), "Oracle"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyType", getNsPrefix(), getNsURI(), "Name"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyId", getNsPrefix(), getNsURI(), "Hermes-b"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyType", getNsPrefix(), getNsURI(), "Name"));
attach(soapMessage);
protected void attach(SOAPMessage soapMessage)
String h=mess;
DataHandler dh;
AttachmentPart ap = soapMessage.createAttachmentPart(h,"text/plain");
soapMessage.addAttachmentPart(ap);
if(allegati!=null)
for(int i=0; i<allegati.size();i++)
dh=new DataHandler(new FileDataSource(new File(allegati.get(i))));
ap=soapMessage.createAttachmentPart(dh);
ap.setContentType(new MimetypesFileTypeMap().getContentType(allegati.get(i)));
ap.setContentLocation(allegati.get(i));
soapMessage.addAttachmentPart(ap);
@Override
protected void processFault(SOAPFault soapFault) throws SOAPException{}
@Override
protected Object processResponse(SOAPMessage responseMessage,SOAPBody responseBody) throws SOAPException
SOAPElement messageId = SOAPUtility.getChild(responseBody, "message_id", getNsURI());
return null;
%>
The code works fine on the other trading partner side to send ebXML message to Oracle B2B. Apart from this solution (however,it would be my favorite), I find your blog and I try to implement your solution. It works: it sends files with only text payload to the other trading partner without any problem, but if I try to send for example an image in byte array written in a file .txt, the ebxml file received has the byte array with wrong characters. it may be that I have not provided the xsd schema? in case if I wanted to send an ebXML message with text and attachments, what xsd schema do I need to provide?
or is there another way to implement a SOA composite application to send SOAP messages with attachments?
Thank for your help!, regards
Nello

Do i have to pay exam center fee to an authorized oracle exam center(new horizon) in Bangladesh rather than the exam fee of Oracle Database 11g: SQL Fundamentals I ?

Do i have to pay exam center fee to an authorized oracle exam center(new horizon) in Bangladesh rather than the exam fee of Oracle Database 11g: SQL Fundamentals I ?

I agree with Matthew that I cannot be sure exactly what you are asking.
Generally i regard it as less risk to yourself to schedule and pay Pearson Vue directly.
However if you contact the exam center and get them to schedule for you my understanding is you pay them. Unfortunately there is risk of the exam center overcharging you (99%++ of most most worldwide wont).
The only reasons for doing this I can think of is (there may be more) :-
- is if you do not have credit/debit cards that Pearson Vue would accept.
- The center will accept turn up and schedule and your transport to the exam center might be unreliable and you are worried you might miss the appointment and you are hoping to pay on arrival (some will not accept this).

Transactional Behaviour of Oracle B2B 11g

Hi Gurus/Anuj,
Can you please explain Transactional Behaviour in Oracle B2B 11g?
For a Inbound Interface I have three Mediators(Mediator M1,M2 and M3)
Partner push a file at file location --> B2B Interface used in M1 ,through B2B Binding,picks the FIle and brings to SOA and--> Give it to M2 and M3.
I need to perform Error Handling in this case..
M1 M2 and M3 are Asynchronous,Synch and Synch in nature and I guess M1 will propogate it's transaction to M2 and M2 will propogate it's transaction to M3.
Routing rules are Sequential..
Note : Fault policies are applicable to parallel routing rules only. For sequential routing rules, the fault goes back to the caller and it is the responsibility of the caller to handle the fault.
Am I correct in understanding that :
B2B Adapter in M1 is the caller and M2 and M3 ,as being Synchronous,will follow M1'a transaction.
And if a Fault goes into M2 and M3,it will go back to the caller,means M1.
And in M1 we can have Fault-Handling.
Also please explain Transactional Behaviour in Oracle B2B 11g?
Is B2B is Asynchronous in nature?
Is B2B Adapter a Transactional Adapter?
What category of JCA adapter is Oracle B2B adapter?
Thanks
Vivek
Edited by: Vivek on May 19, 2011 11:41 PM
Edited by: Vivek on May 19, 2011 11:54 PM

Hi Vivek,
Also please explain Transactional Behaviour in Oracle B2B 11g?Oracle B2B depends upon the underlying transport being used for transactional behavior. As far as transaction propagation is concerned, we never had any such need in B2B communication.
Am I correct in understanding that :
B2B Adapter in M1 is the caller and M2 and M3 ,as being Synchronous,will follow M1'a transaction.
And if a Fault goes into M2 and M3,it will go back to the caller,means M1.
And in M1 we can have Fault-Handling.If you are using AQ interface of B2B adapter with XA Data Source then that adapter can participate in an XA global transaction that can span multiple resources. In this transaction, the application server acts as the coordinating transaction manager with multiple databases (or other resources such as JMS), each of which is involved in a single transaction.
If you are using JMS interface of B2B adapter with XA Connection factor then that adapter can also participate in an XA global transaction that can span multiple resources.
If you are using Default (Fabric) interface of B2B adapter then it does not participate in global transaction, rather it starts it's own local transaction and executes in that. So it will totally depend upon the interface you are using with B2B adapter that it will start and propagate a global transaction or will not participate in a global transaction. Moreover, if B2B adapter is starting a transaction and propagating it to a async service then that sync service will start a new local transaction and further sync services may execute in that transaction. As soon as the control comes back to B2B adapter, it will commit the transaction.
Is B2B is Asynchronous in nature?B2B can be used for both sync and async calls (between partners). B2B is async when communicating with middleware.
Is B2B Adapter a Transactional Adapter?Explained above
What category of JCA adapter is Oracle B2B adapter?No special category. It is a specific adapter for Oracle SOA SCA composites to facilitate them in communication with Oracle B2B. You may or may not use this adapter in SOA SCA composites.
Regards,
Anuj

Unable to connect to the informatica repository on oracle database 11g

hi all,
i have installed OBI Apps 7.9.6.0 with informatica 8.6.0 and no hotfix.
Now the problem is , when i create a repository service i get the error
" The service did not start due to the following error: *Unable to connect to the repository Oracle_BI_DW_Base on database* . " here Oracle_BI_DW_Base is also the name of my .rep repository that came with OBI APPS installation.
i have oracle database 11g installed and also created respective user for repository of informatica.
what should i do in this case??
plz help

Good Morning.
I had the same problem and I had the same IE 6, the problem was the translation between the IE6 from http and https, to solve it you just need to open your url typing
https:url:port, do no forget to put the s after the http, with this my problem was solved.
best regards.
Digudi - São Paulo - Brazil
Edited by: user12267194 on 24/11/2009 05:37
Edited by: user12267194 on 24/11/2009 05:38
Edited by: user12267194 on 24/11/2009 05:38

Unable to retreive the fault message returned by web service

Hi,
We are working on Proxy to SOAP synchronous scenario. The WSDL provided by the third party has 3 messages - 1. for request structure, 2. response structure and 3. Error message to track the exceptions, if any. The interface working fine for positive test cases but we are facing issues when trying to capture the error message returned by the web service.
We have configured the error message(provided in WSDL) as fault message in our Inbound interface. In the outbound interface, we have configured standard Fault message type provided by XI. we have mapped the two structure.
Now when error is returned by the web service, we are able to see the blank response structure in the payload in MONI in XI. Also the SOAP Error Message structure is there in XI.
But when we trying to retrieve the same in our proxy, it is giving the blank structure.
Please help how to get the error message returned by the web service in proxy....
Please help..
Thanks in advance.

>>>I am getting the error message as the fault message, in the response from the web service.
>>>Now I want to forward the same message to SAP R/3 system. For this I have configured the standard fault message in the >>>outbound interface and have mapped the same with the web service error message. So if I am not wrong, the transformed >>>>structure according to the rules in message mapping should be sent to SAP R/3 system. But I am unable to see the result >>>>of this mapping in XI MONI. Neither is this passed to Client proxy.
You are consuming the third party webservice. Third party webservice WSDL has request, response and fault message. if the third party application logic capture the exception and pass the response as fault mesg, then the above specified target fault mesg mapping with your Standard fault message mapping will be sent to sender or client proxy.
Suggestions:
Having fault message in WSDL does not mean that target system sends fault message during application exception. Check in the SXMB_MONI whether your response during exception is occuring in the fault message structure publised as WSDL. If not then doing mapping will not help. It gives only blank.
If you notice response in fault message structure from third party in SXMB_MONI, then you need to check that at the client proxy side, are you handling/done coding for fault message methods similar to response strucutre for capturing data.
Hope that helps.

Unable to findout the error message in debug

Hi Gurus,
When i am trying to execute the T.code FMCI_COPY_NEXT_YEAR i am getting the
ERROR MESSAGE: SET SCREEN NOT ALLOWED IN SUB SCREEN (SCREEN NO SAPLSBAL_DISPLAY0101) in new implementation.
i am unable to find out where the exact error is comming ... i requested you to please guide me for the same...
Thanks in Advance !!!
regards,
Sanjay

HI,
double click on message and notice the number and type.
Debug the program/function and set a breakpoint as statement "message".
The system will hold on each message and with the information of number and type, you will find the right costing.
Regards
Nicole

Unable to Install the Common Components and Oracle HTTP Server

I am installing the Hyperion 11.1.2.1.0 in Linux 64 bit server..
I have done the downloading the files from 1to 7 for Foundation Services and Static client with all Essbase.
I have unziped the all into one folder and done the installation , but i am not able to install the Oracle HTTP serve and common components.even If i tired to configure the system showing the Below error...
*Launching the Hyperion Configuration Utility, please wait...*
*Running preconfig checks...*
*Running EPM_ORACLE_HOME check...*
*EPM_ORACLE_HOME environment variable value: /fcs/Oracle_Home/Middleware/EPMSystem11R1*
*JAVA_HOME environment variable value: /fcs/Oracle_Home/Middleware/EPMSystem11R1/../jdk160_21*
*EPM_ORACLE_HOME check succeeded*
*Running .oracle.products check... .oracle.products check succeeded*
*Running Jars manifest check...*
*Time spent for manifests parsing: 606 ms*
*Maximum jars depth achieved: 6, while restriction was: unrestricted*
*Parsed 419 manifests*
*Total jars and classpath entries encountered: 419*
*Total not-existing referenced classpath entries count: 62*
*Total classpath elements to check: 59*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jsf_1.2.9/glassfish.jstl_1.2.0.1.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/jlib/share.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/velocity-dep-1.4.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/org.apache.commons.beanutils_1.6.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/jlib/jewt4.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/args4j-2.0.9.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*FATAL ERROR: Jars manifest check failed with message "Some referenced jars do not exist"*
*Exiting in 30 seconds"*
Thanks in Advance
Rao.

It may be worth having a read of the following article on Oracle Support - "Epm 11.1.2 Config Tool Fatal Error: "Some Referenced Jars Do Not Exist" [ID 1175585.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Unable to find the processed message

Hi
I am testing my vendor master upload for file to idoc scenario, I am keeping the file in FTP server and made processing mode as delete , the adpater is deleting the file but i am unable to the processed message in TC SXMB_MONI . any clues????????
Regards
Swatantra

Hi,
1. Check Adapter Monitoring as Divija said
2. Check in MDT and see what is the problem?
http://<host>:<port>/mdt
Message flow is like Adapter Monitoring>MDT>SXMB_MONI
Thanks,
Prakash

Unable to find the sended message from create support message in solman.

Hello everybody,
I had installed the Solution manager and IDES server.
I have configure the Maintenance Optimizer, Now I am able to send the
support message from the IDES.
But Now where to find or serach the message in solution manager ?
or need to be configure service desk?
Please suggest me step by step configuration to check the sended message.
Thanks

hi
>
ganesh borase wrote:
> I have configure the Maintenance Optimizer, Now I am able to send the
> support message from the IDES.
> Thanks
sorry nt clear from your above statement, you configured maintenance optimzer for download supprot packages. do you want to configure support messages functiionality?
Can you please clarify your requirement?
Thanks,
Jansi

Unable to Access the home page of oracle 10g express edition.

I have installed enterprise manager 10g and also express edition 10g .But after installing the enterprise manager 10g and trying to access the url http://127.0.0.1:8080/apex .The xdb username and password is prompted.I deleted the entry in init.ora for the xdb parameter to avoid the userid prompt but still the xdb login credentials are prompted.How can I avoid this message in order to access the 10g express edition home page.
Regards
Pandu

It appears you've got two things listening on port 8080, or more accurately two things that want to listen on port 8080. The winner is probably the Enterprise Manager. The easiest way to check this would be to connect as SYSDBA and run the following to reset the 10gXE XDB listener port:
EXEC dbms_xdb.sethttpport(8181);
Then, attempt to reconnect to the 10gXE on the new port. I suspect a new attempt to connect at the old port 8080 will return the same message. If it doesn't fix it, you should probably inspect the configuration file for XDB. You can do that by running the following:
SET LONG 10000
SET PAGESIZE 9999
SELECT dbms_xdb.cfg_get() FROM dual;
You'll find the template for configuration in the $ORACLE_HOME/rdbms/xml directory. Hope this helps.

Unable to set the header - Message-Id in MimeMessage

Hi all,
I'm facing problem in setting the header -> Message-Id
for my MimeMessage.I tried setting the header using
MimeMessage.setHeader() , also I tried with
MimeMessage.addHeader() both the methods didn't
work.
I've also excuted the MimeMessage.saveChanges()
after setting the header.
I tried to display the message after using the above
with getHeader("Message-Id").
But it seems like the values I have set are not being
reflected.
Can anyone suggest why this is happening?
Any help will be great!!!
dannyy

Hi,
I'm getting the header after I do MimeMessage.saveChanges(); and before sending the mail.
I want to change the message-id that was generated as
you have mention below. Since I'm trying to automate
a part of my mail. I'm sending a request to a mail robot
which need the user name in specfic format
ex: [email protected] But its attaching my
local machine name at the end like : dannyy.fischer@localhost. Is there a way to change this part in the message id.
Please let me know.
thanks
dannyy

Unable to Translate the EDIFACT messages in Oracle B2B 11g

Similar Messages

Maybe you are looking for