Unable to update objects in console (hangs on "apply")

Hi,
I seem to be unable to update, create or delete any objects in SCCM console. For example, I can open properties of an existing application, enter some values, but when I click on "Apply", the console hangs and seems to be stuck in that state
forever, but no application crash. If I kill SCCM console task, reopen console and check the properties again, nothing was updated. I am also unable to create new collections, the wizard just seems to work forever (without freezing).
I rebooted our SCCM site server several times and also restarted SQL service (which is running on another server), but no luck.
Under site status, I can't find anything that seems to be related to the issue. I'm unsure what log file to check, has anybody an idea?
I recently uninstalled SUP and WSUS, maybe this is related?
Thanks!

I got this error as a pop-up today for the first time. I updated a value in the properties dialogue of a collection. Did this two times before today, both times nothing happened for about one hour and then the change was commited. Third time I got this:
"The SMS Provider reported an error."
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
CauseInfo = "11";
Description = "Unable to update collection due to SQL error.";
ErrorCode = 3242722566;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspcollection.cpp";
Line = 830;
ObjectInfo = "";
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
SQLMessage = "[HYT00][0][Microsoft][SQL Server Native Client 11.0]Query timeout expired";
SQLSeverity = 0;
SQLStatus = 0;
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
Maybe someone can get any useful information out of this? I still don't know what to do...

Similar Messages

Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services

Getting this error from DirSync
Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [UserPrincipalName
[email protected];]. Correct or remove the duplicate values in your local directory. Please refer to
http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute values.
Quick eyeball and couldn't see the cause in the user account so used the script here:
http://gallery.technet.microsoft.com/office/Fix-Duplicate-User-d92215ef
And got these outputs:
PS C:\Windows\System32\WindowsPowerShell\v1.0> Export-OSCADUserPrincipalName -UserPrincipalName "[email protected]" -Path .\outputs.csv
WARNING: Cannot find objects with specified duplicate user principal name
[email protected]
Found 0 user(s) with duplicate user principal name.
Where to from here?
Richard P

Hi,
Did you talk about the Microsoft Azure Active Directory Sync tool ?
If yes, this issue occurs if one or more of the following conditions are true:
An object in the on-premises Active Directory has an SMTP address that's the same as the SMTP address of the object that's reporting the problem.
An object in the on-premises Active Directory has a mail attribute that's identical to the object that's reporting the problem.
An object already exists in your organizational account and has the same SMTP address or mail attribute as the object in the on-premises Active Directory
More detail information, please refer to:
http://support.microsoft.com/kb/2520976/en-us
[Troubleshooting] Unable to update this object because the following attributes associated with this object
http://blogs.technet.com/b/aadsyncsupport/archive/2014/05/20/troubleshooting-unable-to-update-this-object-because-the-following-attributes-associated-with-this-object.aspx
Regards.
Vivian Wang

HT4623 Unable to update applications installed.Error message "unable to connet iTunes" appears after installation icon hanging

Since last two weeks I am unable to update my applications installed in iPad with iOS 6. Also no new app is getting installed. Installation icon appears but after some time error message "unable to connect iTunes " appears.Can some one guide me to solve this problem please?

I've had similar problems. Whenever I try and update apps on the iPhone, the app would apparently download ok, but then not install. This didn't happen with new apps - only ones I was updating.
I got around the issue by downloading the update in iTunes on my Mac, then deleting the app from the phone, then syncing. The problem with this method is that certain apps had saved settings which are lost when following this method.
However... I seem to have fixed the issue after 2 months of trying.
I followed the advice of this page:
http://www.iphoneatlas.com/2008/09/10/itunes-8-workaround-for-5002-unknown-error -when-trying-to-update-apps/
Then I repaired disk permissions and finally I completely erased and restored my iPhone BEFORE I synced it after the moving of the Mobile Applications folder.
It's all working perfectly now and made my life much easier (especially with Aurora Feint updates), so I hope that this method works for some others.
Good luck.
Dom

Crystal Reports Server Error - Unable to cast object of type

Hi Everyone,
Not sure if this is the right place to post this question but couldn't find a Crystal Reports Server section.
After doing a windows update on my crystal reports server the following error now occurs when trying to log into .Net InfoView -
An error has occurred: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'BusinessObjects.Enterprise.Desktop.InfoView'.
I found the following article which I followed and re-installed the .net components as well as ensured all services are enabled.
Article: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303335333433323337%7D.do
The error still occurs.
I did some further investigation and found that a similar error occurs in the Admin Console when I try and open the Crystal Report DataSources.
This is the error page that comes up
Server Error in '/businessobjects/Enterprise11/WebTools' Application.
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
+Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information
about the error and where it originated in the code.+
+Exception Details: System.InvalidCastException:
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.+
Source Error:
+The source code that generated this unhandled exception can only be shown when compiled in debug mode.
To enable this, please follow one of the below steps, then request the URL:+
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
 <system.web>
 <compilation debug="true"/>
 </system.web>
</configuration>
+Note that this second technique will cause all files within a given application to be compiled in debug mode.
The first technique will cause only that particular file to be compiled in debug mode.+
+Important: Running applications in debug mode does incur a memory/performance overhead.
You should make sure that an application has debugging disabled before deploying into production scenario.+
Stack Trace:
InvalidCastException: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
 +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Common.datasourceInfoFromReports(ArrayList reports) 226
 +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Datasources.Main() 1821
 +ASP.websamples_datasources_datasources_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) 531
 +System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) 98
 +System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) 20
 +System.Web.UI.Page.Render(HtmlTextWriter writer) 26
 +System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) 25
 +System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) 121
 +System.Web.UI.Control.RenderControl(HtmlTextWriter writer) 22
 +System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 2558
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
Any information on how I can fix this is greatly appreciated.
Regards
Paul
Edited by: Paul Griscti on Sep 3, 2008 2:52 AM

I'd try creating a new Application Pool just for running businessobjects and crystalreportviewers11 and nothing else.
Although the apps are .NET, it uses COM Interop for functionality, so using a common app pool with other versions will collide.
Beyond that - if you have a SAP Business Objects support contract - you might open a new SAP Incident ticket.
Sincerely,
Ted Ueda

CrystalReportViewer Failed to Open the connection Unable to retrieve Object

I am getting the following Error on trying to view a report in the CMC and the Infoview.
CrystalReportViewer
Failed to Open the connection. ReportName
Unable to retrieve Object.
Failed to open the connection. ReportName
I have recently re-installed Crystal Reports Server XI on a server after a disk failure. I had a backup of my CMS database. I reinstalled the Crystal Servwer without atttaching this database, however crystal did not create a new db so I attached my old one.
I have deleted all my old ODBC connections and recreated them with new names and then reconnected my reports in Crystal Reports XI using the "Set Datasource Location" option and the report works fine.But as soon as I try to view it after uploading it as an object onto the server, I get the above error.
Any help would be appreciated.

I am tagging into this unanswered question as well because I think I have a similar issue. In my case I have a report which runs correctly in Crystal Reports designer but when I move it to the scheduler it fails on a "Failed to connect" to the report. In have used "Set data location" to no avail. When I go to Admin Tools and look at the complete list of datasources for all my reports this particular datasource is listed twice. The group of reports under one of the datasources works correctly. The reports listed under the second datasource all fail. The two datsources are spelled exactly the same and when I sompare the database details for a successfull and a failing report using this datasource they are the same (in the console and in infoview).
I have also checked the ODBC connections on the Crystalserver and there is only one occureence.
Any ideas?
Thanks!

Creation of WDS fails on final step - unable to update settings

Hey Ya'll -
I've setup my WDS several times in the past and it's always worked flawlessly. For whatever reason, it quit working recently, and I decided to do a hard reset on my routers and re-create the WDS. I have two Airport Extreme Base Stations.
I've followed the instructions for creating a WDS to the letter. It does everything exactly right until the final step ... after it says "WDS created succesfully" - I click OK, and it says:
1) rejoining this base station's network
2) writing base station configuration ...
It hangs up here, and after about 5 minutes, it finally unlocks (spinning colored beach ball) and says "the airport admin utility was unable to update the settings of the selected base station".
Both base stations are in range right here on my desk. I've tried this 4 times now, and it crashes in the same place everytime.
If I run Airport Admin Utility on each router separately, to change the password, rename the router, etc., it connects easily, writes the configuration, and exits properly. I've done several tests (changing the name of the router, mostly) and I've even tried doing the manual WDS creation, but it does not work.
I have 10.4.3 with Apple Base Station V5.6 and Apple Airport Admin Utility Version 4.2.
Help!~?
Thanks,
FRED

I would suggest going to
https://helpx.adobe.com/support.html
and jumping through whatever hoops are needed to get to the CHAT capability, then initiating an online chat with an Adobe Support person. You will end up speaking with someone in India, but I've had strange problems such as yours solved several times this way. You need to be patient, as it's not a "quick" process, but it should get you to where you need to go.
Good luck.

Unable to Import objects into ID

Hi All,
For your support I have completed the development work and I have moved to Quality from Development. But while trying to import the one scenario in to Quality System from Development in XI, I am getting the following Error:-
Internal error: Unable to transfer changes for object Service | Q14CLNT120 to change list "XI 3.0 Import" (9a590f30-7245-11dc-9266-00306ee97ef1) since object still in change list "XI 3.0 Import" (3ae5e660-701d-11dc-942e-00306ee97ef1)
I have somehow managed to import another scenario last week into Quality, although now I am unable to import. But while trying to activate the imported scenario into Quality System I am getting another Error as below:-
Unable to move object. Change lists were not part of the same import
I tried to activate the change list..but no woek.
Could anyone please advice?
BR
Soumya

Have you checked the GUID in SLD in both the systems?
SLD-->Software Components, to check the GUID.
You can do one thing, first of delete imported objects which are not getting activated from QA, also delete the SWCV from Integration Repository.
Note: Before deleting SWCV, make sure any other working objects are not there in the same SWCV.
Now, if SWCV & GUID in both systems are same then again:
1. Export the objects from Dev (.tpz file)
2. Imort the same .tpz file to QA system.
Now go to Repository of QA and
1. Tools --> Import Design Objects
2. Tools --> Transfer from system landscape Directory --> Update Application Components.
Select your components and press Finish button.
And finally try to Acitvate your objects.
Regards,
Sarvesh
*****Reward points, if found helpfull.

Unable to update iTunes: Related to Bonjour error "WSARecvMsg error 87"

I am running iTunes 9.2.0.61 on Windows 7 Ultimate x64. For some time, I have been unable to update iTunes to the latest version beyond what I have, regardless of what the latest version is.
Using Apple Software Update, I get the following error during the update:
"Errors occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually."
Accompanying this error in the Application log in Event Viewer are a few errors:
Event ID: Source: Occurrences:
100 Bonjour Service 7
11920 MsiInstaller 1
Event ID 100 from Bonjour Service has the following message:
Log Name: Application
Source: Bonjour Service
Date: 10/31/2010 8:51:05 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
WSARecvMsg failed (87)
The specified resource type cannot be found in the image file
Log Name: Application
Source: Bonjour Service
Date: 10/31/2010 8:51:05 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
WSARecvMsg failed (87)
The specified resource type cannot be found in the image file
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T12:51:05.000000000Z" />
<EventRecordID>16990</EventRecordID>
<Channel>Application</Channel>
<Computer>WILL7</Computer>
<Security />
</System>
<EventData>
<Data>WSARecvMsg failed (87)
</Data>
</EventData>
</Event>
Here is the error for event 11920 from MsiInstaller:
Log Name: Application
Source: MsiInstaller
Date: 10/31/2010 8:51:06 AM
Event ID: 11920
Task Category: None
Level: Error
Keywords: Classic
User: WILL7\swsander
Computer: WILL7
Description:
Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">11920</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T12:51:06.000000000Z" />
<EventRecordID>16991</EventRecordID>
<Channel>Application</Channel>
<Computer>WILL7</Computer>
<Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
</System>
<EventData>
<Data>Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B34314246304445342D354241452D344238382D414644332D383641333042323232313 8367D</Binary>
</EventData>
</Event>
I checked my Services console and Bonjour was started. I can also stop and start it without issue. I searched for these errors, but most of what I found was trouble getting the Bonjour service to start and as you can see, this is not my issue.
I have also tried to update iTunes with Bonjour stopped and disabled and with my Eset NOD32 Antivirus software disabled, but neither of these steps made any difference. I do not have a third-party firewall on my PC, but I am using Windows firewall. I have also tried disabling the Windows firewall, but this made no difference.
Any help would be appreciated.

More information:
Found this in the System log in Windows Event Viewer. There are many occurrences coinciding with the times I have been trying to update iTunes and/or Bonjour.
Log Name: System
Source: Service Control Manager
Date: 10/31/2010 9:44:14 AM
Event ID: 7024
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The Bonjour Service service terminated with service-specific error The parameter is incorrect..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7024</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T13:44:14.338716200Z" />
<EventRecordID>94955</EventRecordID>
<Correlation />
<Execution ProcessID="876" ThreadID="4212" />
<Channel>System</Channel>
<Computer>WILL7</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Bonjour Service</Data>
<Data Name="param2">%%87</Data>
</EventData>
</Event>
Message was edited by: scottws

Unable to cast object of type 'Oracle.DataAccess.Types.OracleDecimal'......

I have some Oracle Tables with sequences for primary key and stored procs in packages to wrap up the insert commands. The sequences field are all declared as NUMBER.
I also have Datasets based on the tables and a DataAdapter for each package. The Datasets see the primary keys as System.Decimal. The DataAdapter sees the output primary key parameter to the stored procs as OracleDecimal.
tmp.Parameters.Add(new OracleParameter("P_ID", Oracle.DataAccess.Client.OracleDbType.Decimal, ParameterDirection.Output));
tmp.Parameters["P_ID"].SourceColumn = "ID";
When I call the Update on the DataAdapter the update happens on the DB and then I get the following error
System.ArgumentException : Unable to cast object of type 'Oracle.DataAccess.Types.OracleDecimal' to type 'System.IConvertible'.Couldn't store <231> in ID Column. Expected type is Decimal.
----> System.InvalidCastException : Unable to cast object of type 'Oracle.DataAccess.Types.OracleDecimal' to type 'System.IConvertible'.
If I change the Oracle parameter to Oracle.DataAccess.Client.OracleDbType.Int32 or Oracle.DataAccess.Client.OracleDbType.Int64 it works fine - any ideas why that would be ? I would expect System.Decimal to map to Oracle.DataAccess.Types.OracleDecimal.

Hi,
If I change the Oracle parameter to Oracle.DataAccess.Client.OracleDbType.Int32 or Oracle.DataAccess.Client.OracleDbType.Int64 it works fine - any ideas why that would be ? I would expect System.Decimal to map to Oracle.DataAccess.Types.OracleDecimal.
I'm trying to do the same, but no matter what I do, I get the OracleDecimal error. Parameter is defined as:
bq. this._adapter.InsertCommand = new global::Oracle.DataAccess.Client.OracleCommand(); \\ this._adapter.InsertCommand.Connection = this.Connection; \\ this._adapter.InsertCommand.CommandText = "INSERT INTO PERSON\r\n (ID, SURNAME, NAME, BIRTHCITY, EMSO)\r\nV" + \\ +"ALUES (:ID, :SURNAME, :NAME, :BIRTHCITY, :EMSO) RETURNING ID INTO :ID";+ \\ this._adapter.InsertCommand.CommandType = global::System.Data.CommandType.Text; \\ param = new global::Oracle.DataAccess.Client.OracleParameter(); \\ param.ParameterName = "ID"; \\ param.DbType = global::System.Data.DbType.Int32; \\ param.OracleDbType = global::Oracle.DataAccess.Client.OracleDbType.Int32; \\ param.Direction = global::System.Data.ParameterDirection.Output; \\ param.IsNullable = true; \\ param.SourceColumn = "ID"; \\ this._adapter.InsertCommand.Parameters.Add(param);
But no luck...

Unable to cast object of type 'System.Xml.XmlText' to type 'System.Xml.XmlE

Hi All,
We just migrated from BPC 5.1 to BPC 7.0 SP6. But when we want to run a package in the data manager we get the following error:
Exception Text **************
System.InvalidCastException: Unable to cast object of type 'System.Xml.XmlText' to type 'System.Xml.XmlElement'.
   at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.LoadDetail(String strXMLString)
   at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.GetPackageDetailfromServer(String strPackageName, String strPackageFilePath, String strTeamID)
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.PackageListClickEvent(String strPackageID, String strPackageFileName, String strTeamID)
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.SetStartUp()
   at OSoft.Consumers.DataMgr.PackageModify50.frmMain.frmMain_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Any idea?
Br
Steven

Hi,
If you were running 5.1 version, that would also mean that you were running packages under SQL 2005.
And if you are now running SQL 2008 with BPC 7.0, you should also review all your customized packages. In fact, BPC tasks in SSIS are not the same between SQL 2005 and SQL 2008.
In addition, I would recommend to upgrade your SQL server version to SQL 2008 SP1 cumulative update package 6 (prerequisite). Not sure if you're still running this CU.
Hope this will help.
Best Regards,
Patrick

Unable to update a record using PAI, in Module pool

Hi Experts,
 I m unable to update the records in to the table using P A I in module pool, could any one help me out dear.
The prg is as follows:
INCLUDE MZFIRSTPAGETOP . " global Data
TABLES: ZCHP_CUST_INFO.
DATA: CNAME LIKE ZCHP_CUST_INFO-CREATED_BY,
 REQTYP LIKE ZCHP_CUST_INFO-REQUEST_TYPE,
 DESC LIKE ZCHP_CUST_INFO-SHORT_TEXT,
 PRIO_TYPE LIKE ZCHP_CUST_INFO-PRIORITY_TYPE,
 EFFECTIVE_DATE like ZCHP_CUST_INFO-REQUIRED_STR_DAT,
 COMM_TYP like ZCHP_CUST_INFO-MODE_OF_COMM,
 COMM like ZCHP_CUST_INFO-ADDRESS.
*& Module STATUS_0100 OUTPUT
 text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'FOR1000'.
SET TITLEBAR '1000'.
ENDMODULE. " STATUS_0100 OUTPUT
INCLUDE MZFIRSTPAGEO01 . " PBO-Modules *
INCLUDE MZFIRSTPAGEI01 . " PAI-Modules *
INCLUDE MZFIRSTPAGEF01 . " FORM-Routines *
*& Module USER_COMMAND_1000 INPUT
 text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
WHEN 'SUBMIT'.
Updating the record.
 ZCHP_CUST_INFO-REQ_NUM = C_KNUMV.
 ZCHP_CUST_INFO-CREATED_BY = CNAME.
 ZCHP_CUST_INFO-REQUEST_TYPE = REQTYP.
 ZCHP_CUST_INFO-PRIORITY_TYPE = PRIO_TYPE.
 ZCHP_CUST_INFO-SHORT_TEXT = DESC.
 ZCHP_CUST_INFO-CREATED_ON = EFFECTIVE_DATE.
 ZCHP_CUST_INFO-MODE_OF_COMM = COMM_TYP.
 ZCHP_CUST_INFO-ADDRESS = COMM.
INSERT ZCHP_CUST_INFO.
COMMIT WORK.
WHEN 'RESET'.
 CLEAR: CNAME,REQTYP,PRIO_TYPE,
DESC,EFFECTIVE_DATE,COMM_TYP,COMM.
WHEN 'CANCEL'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
Thanks in advance,
Sunil

Hi Kal chand,
 This is the whole prg where the records are not updated. But the ref number is updated.
INCLUDE MZFIRSTPAGETOP . " global Data
TABLES: ZCHP_CUST_INFO.
DATA: OKCODE LIKE SY-UCOMM.
CONSTANTS: LC_NUMBER_RANGE TYPE INRI-NRRANGENR VALUE '01',
 LC_COND_OBJECT TYPE INRI-OBJECT VALUE 'KONV'.
DATA: L_IS_REPL_DELIV TYPE XFLAG,
 C_KNUMV TYPE I.
DATA: CNAME LIKE ZCHP_CUST_INFO-CREATED_BY,
 REQTYP LIKE ZCHP_CUST_INFO-REQUEST_TYPE,
 DESC LIKE ZCHP_CUST_INFO-SHORT_TEXT,
 PRIO_TYPE LIKE ZCHP_CUST_INFO-PRIORITY_TYPE,
 EFFECTIVE_DATE like ZCHP_CUST_INFO-REQUIRED_STR_DAT,
 COMM_TYP like ZCHP_CUST_INFO-MODE_OF_COMM,
 COMM like ZCHP_CUST_INFO-ADDRESS.
*& Module STATUS_0100 OUTPUT
 text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'FOR1000'.
SET TITLEBAR '1000'.
ENDMODULE. " STATUS_0100 OUTPUT
INCLUDE MZFIRSTPAGEO01 . " PBO-Modules *
INCLUDE MZFIRSTPAGEI01 . " PAI-Modules *
INCLUDE MZFIRSTPAGEF01 . " FORM-Routines *
*& Module USER_COMMAND_1000 INPUT
 text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
WHEN 'SUBMIT'.
*FOR INCREMENTING THE VALUE.
C_KNUMV = C_KNUMV + 1.
USED FM TO GENERATE NUMBERS.
CALL FUNCTION 'NUMBER_GET_NEXT'
 EXPORTING
 nr_range_nr = lc_number_range
 object = lc_cond_object
 IMPORTING
 number = c_knumv.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Updating the record.
 ZCHP_CUST_INFO-REQ_NUM = C_KNUMV.
 ZCHP_CUST_INFO-CREATED_BY = CNAME.
 ZCHP_CUST_INFO-REQUEST_TYPE = REQTYP.
 ZCHP_CUST_INFO-PRIORITY_TYPE = PRIO_TYPE.
 ZCHP_CUST_INFO-SHORT_TEXT = DESC.
 ZCHP_CUST_INFO-CREATED_ON = EFFECTIVE_DATE.
 ZCHP_CUST_INFO-MODE_OF_COMM = COMM_TYP.
 ZCHP_CUST_INFO-ADDRESS = COMM.
*ENDIF.
INSERT ZCHP_CUST_INFO.
COMMIT WORK.
WHEN 'RESET'.
 CLEAR: CNAME,REQTYP,PRIO_TYPE,
DESC,EFFECTIVE_DATE,COMM_TYP,COMM.
WHEN 'CANCEL'.
 LEAVE PROGRAM.
ENDCASE.
regards,
Sunil

Unable to update iphone 3G from 3.1.3 to 4.2

I've been unable to update my phone's OS to any 4.x version. The upgrade begins, but the backup process hangs. (if I just sync my phone, the backup runs properly)
Any advise?

Back up your phone before, than skip the back up process when updating.

I am unable to see Object list selector in SE80 TCode in SAP 4.7

I am unable to see Object list selector in SE80 TCode in SAP 4.7. i'll be thankful if someone can help me out in this regards.
Thanks in Avd.
Edited by: Azeez Azam on Aug 30, 2010 2:14 PM

If you are still experiencing problems after checking your settings, you may need to update your SAP GUI patch. This solved my problem when I couldn't see the object list selector.

DPM Console hangs when adding servers by Modify Protection Group

Hi Guys,
I hope you can help
I've created several protection groups and need to add a couple more servers to each, but I'm having issues where the DPM console hangs. This is what I'm doing:
Under Protection:
Right Click the Protection Group and select: Modify protection group...
Under "Select Group Members" - expand the server and select it's volume or SQL DB, etc and click Next
Under "Select Data Protection Method", I click Next
Now the MMC stops working. There are no error messages, no unresponsive notifications, it just doesn't do anything.
I can't click Back, Next, Cancel, Help or change any of the other options on this page.
I left it once and went to bed, when I came back 12 hours later, nothing had changed.
I have to open task manager and force close the MMC and reopen but I'm unable to add any additional servers. I can create new Protection Groups but would rather avoid this.
For reference
OS: Server 2012 R2 64bit
DPM: 2012 R2 UR4
The issue occurs using local console over RDP or via the client console on Windows 7
Does anyone have an idea how I can get around this issue?
Thanks
Ryan

After further playing - It's not isolated to adding servers. I actually can't continue past the "Select Data Protection Method" page even if I don't change anything in terms of the selection lists.
Anyone else having issues or know what the problem is?

Unable to launch Object Wizard from Agentry Connector Studio

I am running Eclipse Juno (64-bit) with the Agentry Editor installed. When I try to launch the Object Wizard in the Agentry Connector Studio nothing happens. No error message, but the wizard doesn't appear. I am using version 6.0.46.0 of the Agentry editor.
This problem was reported in this thread but no resolution was provided. I did try opening the database development perspective as Welly suggested but it made no difference.
Unable to launch Object Wizard from Agentry connector studio..
Anyone know why this would happen, or if there is a log that might contain an entry that would tell me what went wrong?
Update: I just tried it again after rebooting Windows and now the Object Wizard is grayed out when using the Database Development Perspective. If I switch to the Agentry(Properties) perspective it is not grayed out but still nothing happens when I select it.
Full disclosure: I am running Windows in VMWare Fusion on a Mac. I am seeing some strange behavior in general with Eclipse and I've reinstalled it a number of times without resolving the problem.
Thanks,
Dave

One of the applications I have issue issues if you export the application you will not be able to load it on any other editor except from the the editor running on the Fusion VM machine and the issue was also the server failed to load the application that was published from the editor.
I am just letting you know to look see if you also run into this issue and that was the reason why then had to run on a windows machine.
Stephen.

Unable to update objects in console (hangs on "apply")

Similar Messages

Maybe you are looking for