Unable to use ATI radeon on linux 3.13

Dell Inspiron N5010 laptop
$ lspci -k | grep -A3 VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV730/M96 [Mobility Radeon HD 4650/5165]
Subsystem: Dell Device 0447
Kernel driver in use: fglrx_pci
Kernel modules: radeon, fglrx
Booting using the 2014.03.01 installer (has the 3.13.5 kernel) completely hangs up my system after some initial loading. I can only boot by setting the nomodeset parameter. After installing xorg and ati drivers and rebooting, I either get a black screen, or the following errors.
Mar 10 14:21:17 sdh-archlinux kernel: [drm] Initialized drm 1.1.0 20060810
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon kernel modesetting enabled.
Mar 10 14:21:18 sdh-archlinux kernel: fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Mar 10 14:21:18 sdh-archlinux kernel: [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x1028:0x0447).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio base: 0xFBE20000
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio size: 65536
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Detected VRAM RAM=1024M, BAR=256M
Mar 10 14:21:18 sdh-archlinux kernel: [drm] RAM width 128bits DDR
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of VRAM memory ready
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of GTT memory ready.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Loading RV730 Microcode
Mar 10 14:21:18 sdh-archlinux kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Driver supports precise vblank timestamp query.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: irq initialized.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 0 succeeded in 1 usecs
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 3 succeeded in 1 usecs
Mar 10 14:21:19 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:20 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:21 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:22 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:23 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:24 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:25 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:26 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:27 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, giving up!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1).
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Enabling audio 0 support
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 3 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon atom DIG backlight initialized
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Radeon Display Connectors
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 0:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] VGA-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 1:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HDMI-A-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HPD1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DFP1: INTERNAL_UNIPHY
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 2:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LVDS-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LCD1: INTERNAL_UNIPHY2
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Internal thermal controller with fan control
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon: dpm initialized
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb mappable at 0xC045E000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] vram apper at 0xC0000000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] size 4325376
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb depth is 24
Mar 10 14:21:29 sdh-archlinux kernel: [drm] pitch is 5632
Mar 10 14:21:29 sdh-archlinux kernel: fbcon: radeondrmfb (fb0) is primary device
Mar 10 14:21:29 sdh-archlinux kernel: [drm:rv770_dpm_set_power_state] *ERROR* rv770_restrict_performance_levels_before_switch failed
Mar 10 14:21:29 sdh-archlinux kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Mar 10 14:21:29 sdh-archlinux kernel: [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
I am currently using the legacy catalyst drivers + Xorg 1.12. It works, but it has its own set of issues (eg. screenshots not working on KDE)
Is there a easy fix for this so that I can use the open source drivers for my old ATI card or is it a kernel bug and needs to be reported upstream?

Hi,
Although I'm a Ubuntu user, not Arch Linux's, but I had the same issue.
Passing radeon.dpm=0 solved the issue (as workaround).
Thank you so much for great information.
# radeon.runpm=0 doesn't solve the issue. Yeah, I firstly thought that this issue was related with acpi; I really had to use acpi=off.
[Edit]
My machine is AMD A8-6500 + MSI A78M-E35.
Without radeon.dpm=0, my machine reboots suddenly rather than blackout.
I have big difficulty of debugging.
Last edited by cielavenir (2014-04-24 03:09:01)

Similar Messages

Using ATI RADEON it says only CUDA 5.0 Nvidia GPU for After Effects

I'm using AMD radeon graphic card instead of specified Nvidia CUDA
so,..now After Effects will work on ATI radeon or not???
what should i do for this issue??

my system specifications are graphics: ATI RADEON 2GB
processor: intel i3
so,...my problem with Adobe After Effects is
while opening AAE the graphic card is not supporting
it is asking for Nvidia CUDA 5.0
now,..AAE will not work on my lappy??
what is the solution for this??

Cant use ati radeon 2600

I have a first edition mac pro, I was told that the ati radeon 2600 would work in it but I can't get it to work. The screen is fuzzy and none of my games will detect it. Do I need to upgrade to leopard to use it.

If you can find someone with Leopard and copy the Radeon 2xxx drivers from the Extensions folder, it might work okay under Tiger. But the card (and drivers) was designed to work under Leopard.

BIOS AGP setings for MSI6712 (KT4V-L) using ATI Radeon 9600XT video card ?

Because I am having graphic issues with Battlefield-2 since the new patch, I want to know what should be the BIOS AGP setings to go accordingly with my ATI Radeon 9600XT video card ?
I have all or part of the following BIOS AGP setings below. I picked this up on the net but I don't recall all the values I have as I am at the office right now.
**AGP timing Control**
AGP Mode: 8x <== that's what I remember having
AGP Fast Write: Enabled <== that's what I remember having
AGP Aperture Size: 256 MB <== that's what I changed it to yesterday
AGP Master 1 W/S Write: Enabled <== that's what I remember having
AGP Master 1 W/S Read: Disabled <== that's what I think I have
AGP Read Synchronization: Disabled <== don't remember what I have
PCI Delay Transaction: Enabled <== don't remember if I have it

I still don't think this is mobo thing. Please use the Internet. There are lots of people having problems with the patch you mention.
One thing I come across is that you should install something called Special Forces b e f o r e you install the patch.
This is in your favourite language Swedish , it took me too long to find in English, but maybe you can find some search criteria for your own Internet search:
http://64.233.183.104/search?q=cache:ISNg7CPnQaQJ:forum.directconnect.se/archive/index.php/t-8074.html+patch+1.12+Battlefield+2&hl=sv
Adding: When searching for software or hard ware solutions to a problem, just add "problem" in the Search-for-box".

Cannot play FiFA09 using ATI RADEON X1600

Hello,
I have a problem with playing Fifa09 on my laptop,
I cannot see players..I see only their shades..this is why I am trying to find an update to my display
driver..I have toshiba satellite A100-683 (PSAA9E) processor Core duo T2250, 1GB RAM, Hard disk 120 GB, display card ATI MOBILITY RADEON X1600 512mb hypermemory driver: ati2dvag.dll version: 6.14.0010.6587 date: 25/12/2005 and catalyst control center version 1.2.2180.38582 and driver version of catalyst is 8.204
I went to ati site:
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_xp.aspx?type=2.4.2&product=2.4.2.3.10&la ng=English&rev=9.3&ostype=Windows%20XP%20-%20Professional/Home
to download the latest driver but when i run the verification software it says this driver is not compatible with my system.
Can you help me please to find a compatible driver?
By the way I tried to download the display driver I found here in toshiba site but I get an error when I click on the file setup.exe saying that this file has long characters or something like that..
here is the link I tried: [link|http://it.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=IT&selCategory =2&selFamily=2&selSeries=153&selProduct=624&selSho rtMod=null&language=24&selOS=10&selType=11&yearupl oad=&monthupload=&dayupload=&useDate=null&mode=use rMachines&search=&action=search&macId=1&country=19 &selectedLanguage=24&type=11&page=1&ID=56770&OSID= 10&driverLanguage=42]

I have decided to try again installing the driver in toshiba website before trying omega ones..maybe i did something wrong in the first attempt..
well..i have some questions and hope u help me to understand..
1- in device manager: the display driver version is 8.204.0.0 while in Dxdiag, the driver file is ati2dvag.dll and the version is 6.14.0010.6587
my question is how the version is not same?
2- i want u help me to make sure i am trying to install the correct driver..my doubt comes from the file, it seems to be from germany because when i downloaded it it says downloading from toshiba-tro.de while my laptop is from italy and i dont want that language creates any problem in function of my video card...
the driver name is: display-20070913133331.zip and the version of this driver is: 8.292-038742C...here is the link:
[driver|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&selSho rtMod=444&language=24&selOS=10&selType=11&yearuplo ad=&monthupload=&dayupload=&useDate=null&mode=allM achines&search=&action=search&macId=&country=all&s electedLanguage=24&type=11&page=1&ID=56770&OSID=10 &driverLanguage=42]
3- I extracted this file to a folder but there is no a file of how install to help me do it in correct way...In the main folder I see 2 setup files:
one is called: setup.exe (ati cim application launcher module version 6.14.10.1005) and the other is called: issetup.exe (installshield setup launcher)
moreover there are 4 subfolders in this folder (ace, bin, dotnet, driver): In the ace subfolder there is another setup.exe file and in the driver subfolder there is another setup.exe file (file version is 6.11.100.1300)
so my question is which one should be used for installation?
4- I know it is better uninstalling the existing driver before installing the new one..my question is: I have 2 things in control panel add remove:
-catalyst control center version 1.2.2180.38582
and ati display driver version 8.204-051220a1-029876C-Toshiba
do i have to remove both catalyst control center and the ati display driver listed in add remove programs? or do i have to remove the ati display driver only?
5- the driver uninstallation: how to do it: by add remove programs? or by uninstall driver in device manager?
6- is it better to install it in safe mode?
7- how install it? by clicking directly on setup.exe in extracted folder or by going to device manager and install driver by pointing it to extracting folder?
8- dont forget plz to tell me how to backup only the display driver so that i can restore it (in case the restore point will not make me able to restore the display driver only)
Sorry for all these questions and thanks in advance for ur support

In search of drivers for ATI Radeon 7000

I recently purchased a used ATI Radeon 7000 PCI video card for my G3 beige, OS 9.2.2. This is an older model card with just the single VGA output. This comes up as card name "ATI, Bluestar", and card model "ATI, RV100" under Apple System Profiler so I'm a bit confused about that to start with. However, since ASP recognizes it I guess it seems to work though I haven't plugged my monitor into it yet.
The problem is the drivers.
I went to ATI's website to look for drivers to download to get this card working. They have an OS9 updater (ati-retail-9-2-2-jan2005.hqx) that should install a bunch of components. When I run it it only installs a partial set, contrary to what it says it should do. I've seen other postings on Apple Discussions about problems with this installer. ATI seems to make it impossible to contact them other than by telephone which is only open to original purchasers so I can't even tell them there's a problem (much less expect them to do anything about it). A search for Bluestar or RV100 reveals nothing on ATI's website.
Has anybody gotten this installer to work? Is there some other source for drivers for this card? Can somebody e-mail them to me (I don't think this violates any rules since in theory they are openly down-loadable)?
Thanks,
Brian
G3 beiges:DT, 9.2.2, 120GBide; DT, 9.2.2/OS X.3, 120GBide; MT, 8.6/9.2.2, 128MB,

Thanks to all for answering my questions. I decided in the end to just plug my monitor into the card and give it a try despite not haveing the groundwork properly set up. It works so it must be a Mac version of the card. This website (http://www.welovemacs.com/radeon7000vga.html) describes the card, including the model number (but I paid a LOT, LOT less than their price!).
Yes, the installer does put all kinds of things in the System, but not the promised control panel. It looks like the CP isn't essential to the working of the card so I'm not worrying anymore. I used the Apple monitors control panel to set the resolution a few times but it froze up on me once when setting it to 640x480. After that I pulled a copy of Super Res that I had in storage and have been using that.
As to the graphics acceleration, it's kind of hard to tell. I tried viewing a mp4 video clip I have with Quicktime 6. Before the card I could maybe watch a minute before my computer would freeze up. Now I can watch maybe 3 minutes before it freezes up, but the video is very jerky, even when compared to the one minute before card installation. I may now be experiencing the limitations of my 266 MHz G3 in terms of decoding mp4, but this doesn't explain why video seemed smoother before, brief though it was before a freeze.
I then tried a video game. Actually video wasn't too slow with this even with my old configuration. Now things seem to hesitate when the play gets busy and it remids me of when I used to play Crystal Quest on a Mac SE. In this case the card has made things slower.
With general scrolling I don't really notice a difference. There's still hesitation at times. In all the cases I have mentioned the ATI thing in the menu bar says grahics acceleration is on.
So in actuality I haven't really noticed any improvement with this card. If anybody has any tips on ways to tune the system to take more advantage of the card I'd welcome them.
Thanks,
Brian

ATI Radeon HD5870 - gains? Early 2008?

Anyone tried one of these with Color yet? In particular, though it's not officially supported, I'm keen to know if it will work with an early-2008 8-core... from AppleInsider:
Though listed requirements state that the card will only work with a mid-2010 or early 2009 Mac Pro with a PCI Express 2.0 slot, reports have indicated that the ATI Radeon HD5870 will also work with the early 2008 Mac Pro desktop.

as far as has been reported here, the ONLY issue with the Apple-firmware 5770 in Macs before 2010 is related to playing copy-protected movies. There have been no other problems, but there have been a few (surprisingly few) failures.
Mac Pro: Using ATI Radeon HD 5770 graphics card with Mac Pro released before 2010

What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
W.W.

I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

How Do I use an Ati Radeon 4870 HD for 3 Monitors

I am new to the Apple world and community. I recently got a new job that requires me to use a Mac Pro. OS X version 10.6.8. 2.66 ghz dual xeon and 32 GB of ram. It has a ATI Radeon 4870 HD. I can run 2 monitors fine using the DVI and Mini DV port ( Using a convertor from apple. ). When I try to use the 2 other HDMI ports for my third monitor, Mac OS wont detect it. The wierd thing is some of the images from certain apps show on the 3rd Monitor.
Under graphics information it shows the Radeon 4870. Under PCIe information it shows the same card. On the back of my machine I have 2 HDMI slots and another lower down with Mini DV and DVI.
The Displays I am running are 3 HP LP2475w Monitors. Running in DVI mode with one converted to Mini DV. The 3rd non working is running in DVI to HDMI but it can be run Straight HDMI if need. Ive tried alot of configuration settings and I can't get the HDMI port to be detected by MAC OS. Ive plugged one in at a time and just the HDMI do not detect.
Please let me know what information is needed to help troubleshoot this better.

A 5770 is $249 or slightly less and in the same dept to me as replacing hard drives, adding some RAM in order to work and because my understanding is it was the first card to support 3 monitors.
The 5770 only requires 10.6.5+ - and the 4,1 had way too many issues with 10.5.7/10.5.8
The 4870 may or may not provide what you need for the software you run, even though 3 yr old machine but 4 yr old plus video card.
flashing:
http://boeglin.org/blog/index.php?entry=entry090918-031702
4870 vs GTX 285 that came out at that time also
http://www.geek.com/articles/games/macpro-whats-better-ati-radeon-4870-or-nvidia -gtx-285-20090720/
The default card was Nvidia GT120 and req'd no power cables and popular way to support more displays.
People were running DUAL 4870s to support 3rd monitor though back then:
http://forums.macrumors.com/showthread.php?t=665034&page=10

Can i use an apple display with an ati radeon 9200?

so, i have an old mac (bw g3 w/ g4 upgrade) and an old crt monitor (power computing 17"). the monitor is showing it's age and looks like it has maybe a month left.
i can't afford a new mac right now as much as i would love to get an imac. but i will need a monitor so my question is can i buy/use an apple 20" monitor with my ati radeon 9200 video card?
thanks

My Mac mini (according to my system profile) has that same graphics card and it runs the monitor just fine, can get a bit choppy with Expose but thats neither here or there.
Im not sure where in the world you live but in the UK a 20" ACD is almost the same money as a 17" iMac, that way you get your dream pc and a nice new Widescreen display.
Hope you enjoy whatever you choose.
Gareth

ATI Radeon HD 5770_MacPro 1,1_Expansion Slot Utility_How do I use this?

I have just installed a ATI Radeon HD 5770 card in my MacPro 1,1 and everything seems to work just fine, but the Expansion Slot Utility popped up and says it's running below maximum speed. How do I use this?

We would have no idea on this forum, this is an iMac forum. I'd suggest posting to the Mac Pro forum.

ATI Radeon HD 4870, support for quicktime using video card to decode h.264?

Does anyone know if Apple decided to use some of the fancy hardware in the new ATI RADEON HD 4870 to allow quicktime to shunt the h.264 decoding off to the video card?
I've got a 8 cores (and they don't seem all that busy). Even with the Perian quicktime plugin I still run into some HD movies that don't get a constant 24fps.

If the MAc Pro 2.66 comes with Snow Leopard, why would I have to upgrade my OS?
OK. So, if got the MAc version, it would work A-OK without overheating?
Thanks for your input!

Fix for video tearing ATI Radeon HD 4200 using Catalyst Driver??

Hey guys, as the title asks, is there a fix for pretty serious video tearing that I am experiencing on my ATI Radeon HD 4200 video card? I'm using the proprietary driver (catalyst, built from AUR) and would prefer to use that one or, if need be, radeonhd driver as I need HDMI sound output.
Below is my xorg.conf.
Many many thanks in advance to anyone who may have some ideas/experience with this.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
# Driver "radeonhd"
BusID "PCI:1:5:0"
Option "Audio" "on"
Option "HDMI" "all"
Option "AccelMethod" "exa" # to enable 2D and Xv acceleration on R6xx/R7xx - default AccelMethod shadowfb
Option "DRI" "on" # to enable 2D and Xv acceleration on R6xx/R7xx - default DRI disabled
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

FIXED - Bad file from ATI Radeon - Use windows/ hp drivers- Cat control center not updated nor used,? thats why I could not see/ control dual monitors. This 4200 series is probaly on its way out.
I had to pay to get it fixed. Do NOT Update using the update from ATI Readeon? It did not work for me.
Hope that might help someone.
Bye

Unable to connect to Oracle using OCI Drivers on Linux

Hi Everyone!
I am facing a peculiar issue while using Instant Client on Linux ( 64Bit ) running on Red Hat 4.1.
I have downloaded the instant client version 10.2.0.3(.zip) .so files from the below URL
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxx86_64soft.html
UPloaded all the files to a directory under /opt and changed the .bash_profile file, the latest content looks like
ORACLE_HOME=/opt/instantclient_10_2
export ORACLE_HOME
PATH=$PATH:$ORACLE_HOME
export PATH
TNS_ADMIN=/opt/instantclient_10_2
export TNS_ADMIN
LD_LIBRARY_PATH=/opt/instantclient_10_2
export LD_LIBRARY_PATH
PATH=$PATH:$LD_LIBRARY_PATH
export PATH
CLASSPATH=/opt/instantclient_10_2:/opt/instantclient_10_2/ojdbc.jar
export CLASSPATH
Java.library.path=/opt/instantclient_10_2
export Java.library.path
As i have downloaded the Sqlplus utility as well, i am able to connect to the Oracle FARM via sqlplus.
On the other hand, i am unable to connect to the same database via the application. It constantly gives me the following exception,
java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1030)
at oracle.jdbc.driver.T2CConnection$1.run(T2CConnection.java:3138)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jdbc.driver.T2CConnection.loadNativeLibrary(T2CConnection.java:3134)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:220)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:438)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:131)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:77)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:752)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:296)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:220)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:164)
at com.sun.gjc.spi.DSManagedConnectionFactory.createManagedConnection(DSManagedConnectionFactory.java:105)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.createResource(LocalTxConnectorAllocator.java:68)
at com.sun.enterprise.resource.AbstractResourcePool.createSingleResource(AbstractResourcePool.java:891)
at com.sun.enterprise.resource.AbstractResourcePool.createResourceAndAddToPool(AbstractResourcePool.java:1752)
at com.sun.enterprise.resource.AbstractResourcePool.createResources(AbstractResourcePool.java:917)
at com.sun.enterprise.resource.AbstractResourcePool.initPool(AbstractResourcePool.java:225)
at com.sun.enterprise.resource.AbstractResourcePool.internalGetResource(AbstractResourcePool.java:516)
at com.sun.enterprise.resource.AbstractResourcePool.getResource(AbstractResourcePool.java:443)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:248)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:327)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:235)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:165)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:158)
at com.sun.gjc.spi.base.DataSource.getConnection(DataSource.java:108)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:922)
at org.springframework.jdbc.core.JdbcTemplate.call(JdbcTemplate.java:984)
at org.springframework.jdbc.object.StoredProcedure.execute(StoredProcedure.java:117)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO$SysParamsStoredProcedure.execute(SystemParametersDAO.java:150)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO.getSystemParametersList(SystemParametersDAO.java:67)
at com.gecf.uk.pca.dcs.util.SystemParametersDAO.getSystemParametersMap(SystemParametersDAO.java:94)
at com.gecf.uk.pca.dcs.util.SystemParameters.loadParameters(SystemParameters.java:44)
at com.gecf.uk.pca.dcs.util.SystemParameters.<init>(SystemParameters.java:33)
at com.gecf.uk.pca.dcs.util.SystemParameters.getInstance(SystemParameters.java:72)
at org.apache.jsp.common.secure.mypayment_jsp._jspService(mypayment_jsp.java from :86)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:93)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:373)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:470)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:364)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:317)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
at com.gecf.uk.pca.dcs.web.util.SessionFilter.doFilter(SessionFilter.java:97)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:288)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
|#]
I have used the classes12.jar and ojdbc.jar which came with the download and nothing seems to work. A bit surprising when sqlplus works and not the application. I suspect there could be an issue with the driver class. I have been struggling to figure this out for days now...
Can anyone please share their thoughts if something similar was observed earlier please.
Any quick help will highly be appreciated.

ORACLE_HOME=/opt/instantclient_10_2
export ORACLE_HOMEYou don't set ORACLE_HOME with Instant Client.
PATH=$PATH:$LD_LIBRARY_PATH
export PATHThis is unnecessary.
CLASSPATH=/opt/instantclient_10_2:/opt/instantclient_10_2/ojdbc.jar
export CLASSPATHThis is wrong.
It should be:
CLASSPATH=/opt/instantclient_10_2/ojdbc14.jar:<whatever else you need there>
Java.library.path=/opt/instantclient_10_2
export Java.library.pathThis is useless; java.library.path is not an environment variable.
java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.pathThe case is pretty clear. You want to use the OCI driver (your URL starts with "jdbc:oracle:oci:"), so the Java Virtual Machine is looking for libocijdbc10.so in the Java library path but cannot find it.
What is also clear is that the program does not use the CLASSPATH environment variable you set, because then it would never have found the Oracle Driver.
So it seems that your program is ignoring the environment you set (which would explain why it also ignores LD_LIBRARY_PATH which you set correctly).
You must have the environment variables set and exported in the shell that starts the "java" executable.
Also, check that there is no other ojdbc14.jar on this machine (use "find").
To help you debug your problem, let me explain how Sun Java sets Java library path on Linux:
- If you start java with "java -Djava.library.path=/some/dir:/other/dir ...", the Java library path is set to exactly that value.
- If you do not specify -Djava.library.path, the Java library path is taken from the environment variable LD_LIBRARY_PATH.
- Directories listed in /etc/ld.so.conf have no influence on the Java library path (which gave me quite a headache in the beginning).
Do you really need the OCI Driver? If you can do with the Thin Driver (i.e., use an URL that starts with "jdbc:oracle:thin:") you don't need any shared libraries at all.
Yours,
Laurenz Albe

Blank screen while using a ati radeon x1300 pro graphics card

i'm getting a blank screen at start up while using my radeon x1300 pro... dont really know whats wrong with it. the agp slot is good, i'm getting power to the card, my board is set to boot agp/pci for the video so thats good. only problem is is that i'm not sure what the model of my motherboard is to check with compatiblity. got the mb and processor from a buddy of mine. he got the mb and processor from a friends grandpa... so to make long storys short. i have no idea what my computer is made of but from what i hear ati products dont seem to get along well with msi. is there any logical reason? and if so is there anything that i have overlooked here? common problems and such. i've updated everything i could update but still no signs of life comming from my video card " and yes the card was pushed in all the way". any feed back would be appreciated.

Example of what system spex should look like:-
MSI P865 Platinum with 3.A bios ( MS-6728 VER 2 )
Enermax 465 20 pin PSU +3.3V = 35A +5V = 35A +12V = 33A
Intel P4 Northwood 3.0Ghz (No overclock) (Arctic cooling Freezer HSF unit with Coolalabs thermal metal coolant)
512Mb Corsair XMS ddr400 memory (2x256Mb in dual mode)
Trust Dugital Pci Sound card
Nvidia 6800GT 256Mb memory AGP card (No overclock)
80Gb Western Digital IDE hard disk on Primary
LG DVD IDE optical drive on Secondary
Jeantech Phong case (120mm in front intake and 120mm at back exhaust)
Win 98 SE (Del modded edition)
I am sure this will help you.
Del

Unable to use ATI radeon on linux 3.13

Similar Messages

Maybe you are looking for