Unable to use the table selection in the Pages Inspector on blank wordprocessing page. What am I doing wrong?

I was trying to draw a tables with 11 rows and 3 rows as a starts to try to make address labels. Downloading an Avery template didn't work. I opened the Inspector on a word processing blank page but none of the selections worked. "Body rows" and "body columns" were inoperable. Do I have a flaw in the Pages program that came with the iWorks?

Hi 'plexed,
Use the yellow Table button in the tools to insert a table. With any cell in the inserted table selected, the Table Inspector an all its controls become active.
Regards,
Barry

Similar Messages

I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

We are using apple tv to try to access our itunes account on the computer. We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store. Any ideas on what we are doing wrong?

We are using apple tv to try to access our itunes account on the computer. We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store. Any ideas on what we are doing wrong?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.

Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W

I purchased creative lightroom presets. I see the zip file in my download file and I try to import to LR but it just keeps creating a bundle never giving me the option to import (greyed out). What am I doing wrong?

I purchased creative lightroom presets. I see the zip file in my download file and I try to import to LR but it just keeps creating a bundle never giving me the option to import (greyed out). What am I doing wrong?

Try unzipping the file first. I have no idea regarding your level of technical expertise so advanced apologies if this is really basic. A ZIP file is a compressed file containing one of more files within it. To access the files you will need to expand it. If you double-click on it first, it should open up for you. If it does not automatically expand, you can select the files and copy them to a new folder. The copy will unload them into an uncompressed form. Once they have been uncompressed, you should be able to import them.
If the import is still giving you problems, go to your Preferences, click on the Presets tab and click the Show Presets Folder button. You can then copy your purchased presets into the folder shown. You will want to copy them to the User Presets subfolder.

After I make a trailer or movie on my Iphone 4S and try to save it to the camera roll, I get a message that "an error occurred during export". The message appears after the piece has seeminly finished exporting. What am I doing wrong???

After I make a trailer or movie on my Iphone 4S using IMovie and try to save it to the camera roll, I get the message "An error occurred during export." The message appears after the piece has seemingly finished exporting. What am I doing wrong????

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

"If you're on your home screen, where your apps and folders are, you can't."
I can on mine.
For anyone having this issue, take your device out of the case and try it naked before trying a reset, restore or Genius Bar appointment.

HT5313 .tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

dsharp14 wrote:
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
What are the specs on your Mac? Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
Thanks
Pete

I have been trying to download photos. It keeps saying can't create file, please check permissions on destination folder. Ihave made sure I have set the permissions on read and write. What am I doing wrong?

I have been trying to download photos too my MAC. It keeps saying can't create file, please check permissions on destination folder. Ihave made sure I have set the permissions on read and write. What am I doing wrong?

Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer

I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

What version of OS X do you have? Messages requires 10.8. Previously it was iChat (but does not have iMessage capability to send texts to an iOS device).
Matt

I've tried several times to send a document via email and each time the document arrives blank. The document is saved in Adobe and has all the content until I send it. What am I doing wrong?

I Am trying to send an employment application that I have saved to Adobe. Each time I email it to the recipient it arrives blank. What am I doing wrong?

Hi Lee61,
What email client are you using to send the PDF file? If you have a free Acrobat.com account, you can upload your file to your account, and then send a link to it to your recipients.
Best,
Sara

Home sharing is on, but library does not show up under sharing. Turned off then on again and home sharing shows up and the disappears when I click done. What am I doing wrong???

Home sharing can't connect on my computer. It will recognize a library on one computer but not another. Tried turning it off and then on and got nothing. Tried switching to a different apple I'd and got nothing. I have the latest version of I tunes. What am I missing? What am I doing wrong? Can anyone help?

Are you connected to the same SSID network?
to make things a little more easy, i'd perfer to have all my itunes on a network drive for all pc's connected to one itunes and scratch the home sharing itunes to view under another itunes.
Only problem im having is that wrong pictures are showing up for movie/tv show connecting to different computers conecting to one itunes library.
Home Sharing on iPods show wrong pics

Hi, I requested an unlock from T-mobile UK 1.5M ago, and after a restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. What am I doing wrong?

Hi everybody, I need help.
I requested an unlock from T-mobile UK 1.5M ago, and after the restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. And it still doesn't support nay other SIM. What am I doing wrong? How do I get it unlocked?
Thanks in advance for advice

Did you restore the phone as a new device when you did the restore/unlock, or did you restore it from an existing backup? I have found that when unlocking an iPhone on the AT&T network, you don't get the message that the unlock was successful if you don't restore as a new device. The unlock still works, you just don't get the message. Perhaps it is not carrier specific for this behavior.

Audio sync problems with greenscreen I have replaced the camera audio with my zoom recorder audio and it is in sync. When I apply greenscreen the audio goes out of sync. What am i doing wrong?? So frustrating..Thanks, Peter

I have replaced the DSLR audio with audio from my Marantz recorder and it is in sync with the dialogue. I apply green screen and the audio goes out of sync. Cannot seem to make it work. what am I doing wrong? Thanks, Peter

Thanks for the reply. I don't have time for this. is it time to switch to a different editor?

Im trying to hook up atv but the instructions say to select input and I cant get that far. I have plugged in the hdmi cable and the power cable and nothing happens. What am I doing wrong?

I am working with a hotspot only and maybe thats the problem?

Is this a cable modem? It has to be off for at least 20min and sometimes much longer before it will give up the old settings. You might even need to power down the cable modem overnight.
Tell us exactly what broadband you have with what ISP and exact model of modem..
The new TC cannot be setup without using the latest airport utility 6.3.1 or 6.3.2 and you need Lion - Mavericks to use it.
The computer also needs to have ipv6 setup to local link on whatever you are connecting with, wireless or ethernet.

I used ep on my facebook and now i want to use firefox but it will not let me play my games and i have flash player it will only let me go to the home page what am i doing wrong

when i go to facebook on firefox it will only let me go to the home page it will not let me play any of my games that i play when i go through enternet exployer what do i need to do so i can play them on firefox or what am i doing wrong

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Unable to use the table selection in the Pages Inspector on blank wordprocessing page. What am I doing wrong?

Similar Messages

Maybe you are looking for