Unable to use the wifi since the last -Syyu

Good morning,
About a week ago, I made my bi-mensual pacman -Syyu.
Last night, I finally reboot my laptop (due to an infinite loop, damn it). And here comes the christmas surprise : no more wifi!
I tried everything, but the wlp2s0 won't connect. I was able to connect the laptop to the internet using an rj45 and a reboot (I don't know why I have to reboot).
So here's a few commands, I'll be able to add more if you want after a few hours of sleep.
[simon@pizza4ever ~]$ systemctl
  UNIT                                                                                     LOAD   ACTIVE SUB       DESCRIPTION
  proc-sys-fs-binfmt_misc.automount                                                        loaded active running   Arbitrary Executable File Formats File System Automount Point
  sys-devices-pci0000:00-0000:00:02.0-drm-card0-card0\x2dLVDS\x2d1-intel_backlight.device  loaded active plugged   /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight
  sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device                                   loaded active plugged   7 Series/C210 Series Chipset Family High Definition Audio Controller
  sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-net-enp1s0.device                       loaded active plugged   RTL8101E/RTL8102E PCI Express Fast Ethernet controller
  sys-devices-pci0000:00-0000:00:1c.1-0000:02:00.0-ieee80211-phy0-rfkill0.device           loaded active plugged   /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill0
  sys-devices-pci0000:00-0000:00:1c.1-0000:02:00.0-net-wlp2s0.device                       loaded active plugged   QCA9565 / AR9565 Wireless Network Adapter
  sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged   WDC_WD5000LPVX-75V0TT0 1
  sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged   WDC_WD5000LPVX-75V0TT0 2
  sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged   WDC_WD5000LPVX-75V0TT0 5
  sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device      loaded active plugged   WDC_WD5000LPVX-75V0TT0
  sys-devices-pci0000:00-0000:00:1f.2-ata3-host2-target2:0:0-2:0:0:0-block-sr0.device      loaded active plugged   MATSHITA_DVD+_-RW_UJ8C2
  sys-devices-platform-serial8250-tty-ttyS0.device                                         loaded active plugged   /sys/devices/platform/serial8250/tty/ttyS0
  sys-devices-platform-serial8250-tty-ttyS1.device                                         loaded active plugged   /sys/devices/platform/serial8250/tty/ttyS1
  sys-devices-platform-serial8250-tty-ttyS2.device                                         loaded active plugged   /sys/devices/platform/serial8250/tty/ttyS2
  sys-devices-platform-serial8250-tty-ttyS3.device                                         loaded active plugged   /sys/devices/platform/serial8250/tty/ttyS3
  sys-module-configfs.device                                                               loaded active plugged   /sys/module/configfs
  sys-subsystem-net-devices-enp1s0.device                                                  loaded active plugged   RTL8101E/RTL8102E PCI Express Fast Ethernet controller
  sys-subsystem-net-devices-wlp2s0.device                                                  loaded active plugged   QCA9565 / AR9565 Wireless Network Adapter
  -.mount                                                                                  loaded active mounted   /
  dev-hugepages.mount                                                                      loaded active mounted   Huge Pages File System
  dev-mqueue.mount                                                                         loaded active mounted   POSIX Message Queue File System
  proc-sys-fs-binfmt_misc.mount                                                            loaded active mounted   Arbitrary Executable File Formats File System
  run-user-1000.mount                                                                      loaded active mounted   /run/user/1000
  run-user-620.mount                                                                       loaded active mounted   /run/user/620
  sys-kernel-config.mount                                                                  loaded active mounted   Configuration File System
  sys-kernel-debug.mount                                                                   loaded active mounted   Debug File System
  tmp.mount                                                                                loaded active mounted   Temporary Directory
  systemd-ask-password-console.path                                                        loaded active waiting   Dispatch Password Requests to Console Directory Watch
  systemd-ask-password-wall.path                                                           loaded active waiting   Forward Password Requests to Wall Directory Watch
  session-c1.scope                                                                         loaded active abandoned Session c1 of user lightdm
  session-c2.scope                                                                         loaded active running   Session c2 of user simon
  accounts-daemon.service                                                                  loaded active running   Accounts Service
  dbus.service                                                                             loaded active running   D-Bus System Message Bus
[email protected]                                                                    loaded failed failed    dhcpcd on enp1s0
  [email protected]                                                                    loaded active running   Dropbox
  kmod-static-nodes.service                                                                loaded active exited    Create list of required static device nodes for the current kernel
  lightdm.service                                                                          loaded active running   Light Display Manager
  mongodb.service                                                                          loaded active running   High-performance, schema-free document-oriented database
  netctl.service                                                                           loaded active exited    (Re)store the netctl profile state
● netctl@wlp2s0\x2d326356.service                                                          loaded failed failed    Automatically generated profile by wifi-menu
  NetworkManager.service                                                                   loaded active running   Network Manager
  polkit.service                                                                           loaded active running   Authorization Manager
  systemd-backlight@backlight:intel_backlight.service                                      loaded active exited    Load/Save Screen Backlight Brightness of backlight:intel_backlight
  systemd-binfmt.service                                                                   loaded active exited    Set Up Additional Binary Formats
  systemd-journal-flush.service                                                            loaded active exited    Trigger Flushing of Journal to Persistent Storage
  systemd-journald.service                                                                 loaded active running   Journal Service
  systemd-logind.service                                                                   loaded active running   Login Service
  systemd-random-seed.service                                                              loaded active exited    Load/Save Random Seed
  systemd-remount-fs.service                                                               loaded active exited    Remount Root and Kernel File Systems
  [email protected]                                                           loaded active exited    Load/Save RF Kill Switch Status of rfkill0
  [email protected]                                                           loaded active exited    Load/Save RF Kill Switch Status of rfkill1
  [email protected]                                                           loaded active exited    Load/Save RF Kill Switch Status of rfkill2
  [email protected]                                                           loaded active exited    Load/Save RF Kill Switch Status of rfkill3
  systemd-sysctl.service                                                                   loaded active exited    Apply Kernel Variables
  systemd-tmpfiles-setup-dev.service                                                       loaded active exited    Create Static Device Nodes in /dev
  systemd-tmpfiles-setup.service                                                           loaded active exited    Create Volatile Files and Directories
  systemd-udev-trigger.service                                                             loaded active exited    udev Coldplug all Devices
  systemd-udevd.service                                                                    loaded active running   udev Kernel Device Manager
  systemd-update-utmp.service                                                              loaded active exited    Update UTMP about System Boot/Shutdown
  systemd-user-sessions.service                                                            loaded active exited    Permit User Sessions
  systemd-vconsole-setup.service                                                           loaded active exited    Setup Virtual Console
  [email protected]                                                                        loaded active running   User Manager for UID 1000
  [email protected]                                                                         loaded active running   User Manager for UID 620
  wpa_supplicant.service                                                                   loaded active running   WPA supplicant
  -.slice                                                                                  loaded active active    Root Slice
  system-dhcpcd.slice                                                                      loaded active active    system-dhcpcd.slice
  system-dropbox.slice                                                                     loaded active active    system-dropbox.slice
  system-getty.slice                                                                       loaded active active    system-getty.slice
  system-netctl.slice                                                                      loaded active active    system-netctl.slice
  system-systemd\x2dbacklight.slice                                                        loaded active active    system-systemd\x2dbacklight.slice
  system-systemd\x2drfkill.slice                                                           loaded active active    system-systemd\x2drfkill.slice
  system.slice                                                                             loaded active active    System Slice
  user-1000.slice                                                                          loaded active active    user-1000.slice
  user-620.slice                                                                           loaded active active    user-620.slice
  user.slice                                                                               loaded active active    User and Session Slice
  dbus.socket                                                                              loaded active running   D-Bus System Message Bus Socket
  dm-event.socket                                                                          loaded active listening Device-mapper event daemon FIFOs
  lvm2-lvmetad.socket                                                                      loaded active listening LVM2 metadata daemon socket
  systemd-initctl.socket                                                                   loaded active listening /dev/initctl Compatibility Named Pipe
  systemd-journald-dev-log.socket                                                          loaded active running   Journal Socket (/dev/log)
  systemd-journald.socket                                                                  loaded active running   Journal Socket
  systemd-shutdownd.socket                                                                 loaded active listening Delayed Shutdown Socket
  systemd-udevd-control.socket                                                             loaded active running   udev Control Socket
  systemd-udevd-kernel.socket                                                              loaded active running   udev Kernel Socket
  dev-sda5.swap                                                                            loaded active active    /dev/sda5
  basic.target                                                                             loaded active active    Basic System
  cryptsetup.target                                                                        loaded active active    Encrypted Volumes
  getty.target                                                                             loaded active active    Login Prompts
  graphical.target                                                                         loaded active active    Graphical Interface
  local-fs-pre.target                                                                      loaded active active    Local File Systems (Pre)
  local-fs.target                                                                          loaded active active    Local File Systems
  multi-user.target                                                                        loaded active active    Multi-User System
  network.target                                                                           loaded active active    Network
  paths.target                                                                             loaded active active    Paths
  remote-fs.target                                                                         loaded active active    Remote File Systems
  slices.target                                                                            loaded active active    Slices
  sockets.target                                                                           loaded active active    Sockets
  sound.target                                                                             loaded active active    Sound Card
  swap.target                                                                              loaded active active    Swap
  sysinit.target                                                                           loaded active active    System Initialization
  timers.target                                                                            loaded active active    Timers
  logrotate.timer                                                                          loaded active waiting   Daily rotation of log files
  man-db.timer                                                                             loaded active waiting   Daily man-db cache update
  shadow.timer                                                                             loaded active waiting   Daily verification of password and group files
  systemd-tmpfiles-clean.timer                                                             loaded active waiting   Daily Cleanup of Temporary Directories
LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
105 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[simon@pizza4ever ~]$ iwconfig
wlp2s0    IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off  
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
lo        no wireless extensions.
enp1s0    no wireless extensions.
[simon@pizza4ever ~]$ systemctl status 'netctl@wlp2s0\x2d326356.service'
● netctl@wlp2s0\x2d326356.service - Automatically generated profile by wifi-menu
   Loaded: loaded (/etc/systemd/system/netctl@wlp2s0\x2d326356.service; enabled)
   Active: failed (Result: exit-code) since Thu 2014-12-25 22:38:49 UTC; 14s ago
     Docs: man:netctl.profile(5)
   Process: 11952 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
   Main PID: 11952 (code=exited, status=1/FAILURE)
[simon@pizza4ever netctl]$ sudo cat wlp2s0-326356
Description='Automatically generated profile by wifi-menu'
Interface=wlp2s0
Connection=wireless
Security=wpa
ESSID=326356
IP=dhcp
Key=*****
[simon@pizza4ever ~]$ lspci -k
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev
05)
        Subsystem: Dell Device 0597
        Kernel driver in use: r8169
        Kernel modules: r8169
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
        Subsystem: Dell Device 020c
        Kernel driver in use: ath9k
        Kernel modules: ath9k, wl
[simon@pizza4ever netctl]$ ip link set wlp2s0 up
RTNETLINK answers: Operation not permitted
[simon@pizza4ever netctl]$ sudo !!
sudo ip link set wlp2s0 up
RTNETLINK answers: Operation not possible due to RF-kill
If someone know how to fix that, it would be awesome.
Oh and btw, even if I use the rj45 cable, my maximum download limit is 100kbps with the package manage, is that normal?
Thanks!

I tried
[simon@pizza4ever ~]$ sudo ip link set wlp2s0 up
[simon@pizza4ever ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 74:86:7a:3b:30:19 brd ff:ff:ff:ff:ff:ff
3: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 70:18:8b:05:4e:c7 brd ff:ff:ff:ff:ff:ff
And the journalctl
Dec 26 18:41:25 pizza4ever dhcpcd[10660]: wlp2s0: adding address fe80::fb94:b94d:3848:6e74
Dec 26 18:41:25 pizza4ever dhcpcd[10660]: if_addaddress6: Operation not permitted
Dec 26 18:41:25 pizza4ever dhcpcd[10667]: wlp2s0: starting wpa_supplicant
Dec 26 18:41:25 pizza4ever dhcpcd[10670]: wlp2s0: failed to start wpa_supplicant
Dec 26 18:41:25 pizza4ever dhcpcd[10671]: wlp2s0: Successfully initialized wpa_supplicant
Line 1182: unknown EAP method 'SIM'
You may need to add support for this EAP method during wpa_supplican
build time configuration.
See README for more information.
Line 1182: failed to parse eap 'SIM'.
Line 1185: failed to parse network block.
Line 1192: unknown EAP method 'PSK'
You may need to add support for this EAP method during wpa_supplican
build time configuration.
See README for more information.
Line 1192: failed to parse eap 'PSK'.
Line 1196: failed to parse network block.
Line 1228: unknown EAP method 'IKEV2'
You may need to add support for this EAP method during wpa_supplican
build time configuration.
See README for more information.
Line 1228: failed to parse eap 'IKEV2'.
Line 1231: failed to parse network block.
Failed to read or parse configuration '/etc/wpa_supplicant/wpa_suppl
Dec 26 18:41:25 pizza4ever dhcpcd[10660]: wlp2s0: if_up: Operation not permitted
Dec 26 18:41:25 pizza4ever dhcpcd[10660]: wlp2s0: waiting for carrier
Dec 26 18:41:26 pizza4ever dhcpcd[10660]: received signal INT from PID 0, stopping
Dec 26 18:41:26 pizza4ever dhcpcd[10660]: wlp2s0: removing interface
Dec 26 18:41:26 pizza4ever dhcpcd[10660]: exited
Last edited by Bl4ckb0ne (2014-12-26 23:57:32)

Similar Messages

  • Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone...

    Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone or in iTunes. Prior to the last update, this was always an option. I have also noticed that the Ringtones and Alert Tones are not showing up in my recent purchases as well to allow for me to place them back on my phone and there for require for them to be purchased again... Any help would be greatly appreciated!

    I've discovered that all tones purchased will be downloaded as ringtones, BUT they can be utilized as tones and assigned as alert tones on the iPhone...

  • My iphone 4s is no longer detecting wifi since the ISO8 updates came out. I've restarted, rest the networks, reset the phone back to factory settings, and even tried the freezer trick. It is STILL not detecting ANY wifi networks. HELP!!!

    My iphone 4s is no longer detecting wifi since the IOS8 updates came out. I've restarted, rest the networks, reset the phone back to factory settings, and even tried the freezer trick. It is STILL not detecting ANY wifi networks. HELP!!! I cannot afford to go over my data and I use wifi at home and work... I believe the updates have caused the issue, because it was working fine before the second update released (I hadn't put the first one one until I noticed it had stopped working, and by then the second IOS8 version had came out). They need to do a third update to fix this issue.

    If it's grayed out:
    Reset Network Settings - if that doesn't fix it, then Backup and Restore AS A NEW DEVICE.
    If it's still grayed out, unfortunately that means your Wi-Fi antenna quit, and it needs service.

  • TS1398 my iphone 5s will not connect to the internet via wifi  since the latest update was performed this morning need help

    unable to connect to the internet via wifi since the latest update

    Hello,
    Try Reseting your decive, check your settings or manually restore your iphone bu putting it in DFU mode and connecting it to iTunes there are many youtube videos on how to do this I hope it works and wish you good luck with it. If It doest call apple care.

  • My iphone 4s and my ipad both will not stay connected to wifi since the latest update ios.6

    my iphone will not stay connected to wifi since the ios 6.0 update

    Hello DickChris,
    The following article provides some useful troubleshooting steps and information that can help establish and stabilize Wi-Fi connections on your iPad.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

  • I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to easily, and when it does it can never connect?

    I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect?  You think apple would have a clue how to fix it!  Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

  • I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

  • I have a Macbook with OS X 10.5.8. I am unable to use my iPhone with the iOS 6 upgrade on iTunes.

    I have a Macbook with OS X 10.5.8. I am unable to use my iPhone with the iOS 6 upgrade on iTunes.  Apparently I cannot downgrade to iOS 5 on my iPhone. Please tell me I don't have to pay anything to be able to use my products......

    Which version of iTunes?
    iTunes 10.6.3 - http://support.apple.com/kb/DL1575
    Unless this is a new iPhone 5 I believe the older ones will work with iOS6 and iTunes 10.6.3.  If it won't, you will need to upgrade operating system version.

  • My internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well

    my internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well and took about 4 hours to finally be able to shut down and close everything. Does anyone know how to fix this? Im going into exams and need my internet to work
    Thanks

    I dont know if your allowed to show images here but if you are then these pictures will show you what happens.
    This is what happens when I turn on my iMac (normal)
    This is what happens a few seconds after I turn on my iMac
    Here it is up close
    Hopefully these pictures will help you understand what's been hapening on my iMac when I turn it on.
    Thanks

  • Unable to use MSN Premium for the Share function within Elements 10

    I'm unable to use MSN Premium for the Share function within Elements 10 (it seems the program does not recognize MSN Premium for a valid email program for use within the Share function of Elements 10).  Is this something than can be resolved?

    No, unfortunately. You will have to either set up the adobe email or else just use the attachments button in the MSN premium instead of sending directly from PSE.

  • I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    Is it this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Otherwise:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • When I connect to a personal hotspot via bluetooth it disconnects the wifi on the serving device, why?

    I know this has been working before, and I really need to connect my iPad via Bluetooth to my iPhone so that I can then use the Wireless via my iPhone. Unfortunately, every time I connect to the iPhone via Bluetooth the WiFi on the iPhone disconnects.
    What's up with that?

    I've used it before. Turn on hotspot on iPhone. Turn on Bluetooth on both devices. Connect to hotspot via Bluetooth. iPad can now use wireless via iPhone.
    Now it's stopped working and makes the wireless cut off on the iPhone when the Bluetooth is in use. It makes no sense.
    In case you're wondering why I want to do this, there are mac address limitations in place on my network, and only one device is authorised.

  • I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address.

    I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address being used by another device.  Second wifi network was also created.  The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??

    If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
    Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
    Wait a full minute
    Start the modem, and let it run by itself for 2-3 minutes
    Start the next device connected to the modem and let it run a full minute
    Keep starting devices one at a time about a minute apart until the entire network is back up
    Check the network

  • My ipod just keeps blincking the apple since the update what to do?

    My ipod toup just keeps blincking the apple since the update so i cant use it what to do

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • How can you remove clustering between two BO XI 3.1 Servers

    Hi, Servers A and B have been clustered before and because we have done so many changes to each of the servers, we thought of uninstalling everything from both servers and reinstall BO XI 3.1 server on each. Installed BO XI 3.1 server on Server A, ap

  • Error #2032 when using SAP NetWeaver BI Connection

    Hi, I'm trying to use to new SAP NetWeaver BI Connection in Xcelsius SP2, but when I try to connect to a BEx Query, I receive error #2032. I have a crossdomain.xml file in the Tomcat root of the BO-server, and the Adobe Global Security Settings are a

  • What to do about an "error downloading updates" to CS5

    After a system restore in Windows 8, I reloaded my CS5 program, but components of Camera Raw were missing, specifically the horizontal, barrel, and vertical lens corrections.  When I try to download updates to CS5, it appears the updates are down loa

  • Grab Tool Issue with CS4 crimping Workflow, Solution?

    Hi, I've been a consistent Photoshop user for the past 10 years and have upgraded to CS4 about 9 months ago. I have an issue where I can't (spacebar-> grab tool) to move my image around without zooming in first.  If the side of the image is not being

  • Apps on both windows 7 pro & XP Pro through paralells 5.0

    I have 2 virtual machines running on my macbook pro, windows 7 pro & windows xp pro. I installed the full retail version of windows 7 pro first, & now recently installed windows xp pro service pack 2 OEM. I also have some windows apps installed on bo