Unable to view the messages in sxmb_moni - Quality System
Hi,
We have got a strange problem in the diaplay view for TCode - sxmb_moni for our Quality system.
We have different scenarios - Idoc to Web Service (synchronous using BPM), Proxy to Web Service both inbound and outbound etc all to the same Webservice.
Whenever a scenario executes in the Development system, we are able to view the WSDL data that is sent to the Web Service along with the response given by the Web Service in all the cases successfull or unsuccessful.
But if the scenario is executed in the Quality system there are a few different cases for the display view in sxmb_moni :
Case 1 ) Incase of IDoc to Webservice "Successfull " (ECC -> PI-> Webservice)Scenario we are able to see only the data that is sent to the Webservice. We are not able to view the WSDL sent to the Webservice and the Response received.
Case 2) Incase of IDoc to Webservice " Unsuccessfull / Error " (ECC -> PI-> Webservice) Scenario We are able to view all the data that is sent to the Webservice right from the Idoc to BPM, the WSDL, the response received.
Case 3) In case of Proxy scenarios both inbound and outbound "Successfull ", we are neither able to view the data that is sent to the Webservice or the response received from the Web Service.
Case 4 ) In case of Proxy scenarios both inbound and outbound "Unsuccessfull ", we are able to view only the error and not the data that is exchanged between both the systems.
The point to be noted is that in case of Successfull executions the data is well received at the Web Service end.
What could be possibly missing between the two systems Development and Quality due to which we are not able to view messages in the T-Code SXMB_MONI
Thanks a lot for all the inputs!
Hi Lalit,
In sxmb_ad transaction, go to configuration integration engine (edit) and set Trace Level = 3.
See that:
The specified item was not found.
Regards,
Carme.
Similar Messages
-
Unable to view the message in PA30 maintain text in workflow
Hi All,
We have developed a workflow which gets triggered when ever a record gets created in PA30 infotype 0267.
At the time of record creation the user can maintain his comments in Goto=> Maintain text.
After the record gets created the workflow gets trigerred,
the record gets locked and a workitem appears in the users
inbox.
The user doubles clicks on the workitem and a decision screen appears. Using the objects and Attachments the user can vie the record and also the icon for maintain text.
my problem is that after the record gets locked I am not able to view the text maintained in the maintain text editor,
whereas after that record gets unlocked I am able to view the text.
Are there any settings via which we can view the text irrespective whether it is created at the time record is locked or not.
Thanks and Regards
ShraddhaHi,
By looking at the word 'Maintain text', it looks to me that it doensn't make sense to have this option up when that particluar record is locked. Or there should be an option saying 'Display Text'.
Anyway, what is the purpose of the comments written by the creator of the record? is it only to facilitate the next approver to take his decision or Do you need this comment always attached with record for some proof?
If comment is only to facilitate the next approver to take his decison and not really required to be attached along with record, then may be you can do the following
1. Once the record gets created, the first workitem send it to creator only. In the description mention to add comment and click to continue to go for approval. So, when work item comes to creator he can add the comment using 'Create' option with workitem and this comment will be there as an attachment through out the workflow. So approver will also be able to see the comment.
2. If at all it is required to store these comments along with record, once the whole approval process gets over, in the last step write a method to extract the attachments from workflow container and assign aginst the record. We have FM's to extract attachments ( SAP_WAPI_GET_ATTACHMENTS) and also FMs to store against an object (ARCHIV_CREATE_TABLE,ARCHIV_CREATE_FILE).
Hope this helps you !!
Regards
Krishna Mohan -
Unable to view the message in Network Gatekeeper Simulator
Hi all,
I am new to this product and I have no idea abt to work with OCSG4.1.The given below were the step which I followed.
1. Installed OCSG4.1 on windows and able to start the simulator.
2. Added two mobile nos
3. Send a message from one to another.
4. Showing the a message on simulator " message was delivered to parlay.
As per the simulator guide, the message should visible with a message icon.
Do I need to do any configuration for setting up this demo app?.
Thanks in advance..
Edited by: user8150823 on May 19, 2009 6:24 AMHi All,
I am not able to proceed further..Kindly help me out to solve this issue......
Also, getting a warning WSEE:19 Warning :JMS Queue ' weblogic.wsee.DefaultQueue' is not found, as a result,Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back. <JmsQueuListener.connect:287> -
How to Edit the message mapping in Quality server
Hi Experts,
Can you plz tell me, is there any way to edit the message mapping in QUALITY system?Hi,
>>>>Can you plz tell me, is there any way to edit the message mapping in QUALITY system?
the correct one:
- correct on DEV
- export/import
and it's edited on quality
if you edit on qulity by changing the SWCV to editable then remember to
do the change in DEV later and export import and solve the version conflict on quality
as if you forget to do this someone will have to solve in the future and will not know why....
Regards,
Michal Krawczyk -
For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?
Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards. -
Unable to view the "Discovery Application" section under studio.
Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs? -
Unable to view the image in Oracle Mapbuilder
Hi,
I am unable to view the image using oracle mapviewer.
It stated that:
No spatial data to render...
INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Region=SDOVIS_DATA.
INFO [oracle.sdovis.CacheMgr2] max_cache_size=32 MB.
INFO [oracle.sdovis.CacheMgr2] sub region sdovis_subreg_ias_spatial_jdbc:oracle:thin:@dbdev:1521:orcl created in cache.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
INFO [oracle.sdovis.DBSRSCache] Loading SRS information from MDSYS.cs_srs (srid=8307).
DEBUG [oracle.sdovis.DBSRSCache] Registering srs 8307, isGeodetic=true, unit=DECIMAL DEGREE
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-8
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
FINEST [oracle.sdovis.theme.grtp] Bands: Red - 1 Green - 1 Blue - 1
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-10
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-12
WARN [oracle.sdovis.theme.grtp] GeoRaster SRID can not be 0.
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-14
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: -Infinity,-Infinity,NaN,NaN
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv
INFO [oracle.sdovis.CacheMgr2] Creating/replacing a geometry cache group: sdovis_subreg_ias_spatial_jdbc:oracle:thin:@dbdev:1521:orcl : NYP_IMAGES_IMAGE.SPATIALEXTENT_PDT_GEOM.
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 16ms, total time loading 1 features: 78ms.
FINEST [oracle.sdovis.MapMaker] mbr of all themes: java.awt.geom.Rectangle2D$Double[x=-330.05,y=-206.35000000000002,w=3308.6025,h=2565.5175]
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 78ms.
FINEST [oracle.sdovis.RE] xfm: 0.15474460805665913 0.0 0.0 -0.15474460805665913 185.0792593502091 365.0684501275084
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 16ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 31ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-16
WARN [oracle.sdovis.theme.grtp] GeoRaster SRID can not be 0.
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.SRS] *** isGeodetic=true, unit=DECIMAL DEGREE
FINEST [oracle.sdovis.SRS] before adjusting: minX = -1196.0304250629722, maxX=3844.532925062972 minY=-206.3499999999999, maxY=2359.1675 w=5040.563350125944, h=2565.5175
FINEST [oracle.sdovis.SRS] After adjusting: minX = 0.0, maxX=360.0 minY=-90.0, maxY=90.0 w=5040.563350125944, h=2565.5175
WARN [oracle.sdovis.SRS] Resizing query window to be within valid bounds.
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-18
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: 0.0,-90.0,360.0,90.0
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv WHERE MDSYS.SDO_FILTER(tb_prv.IMAGE.SPATIALEXTENT, MDSYS.SDO_GEOMETRY(2003, 8307, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?, ?, ?, ?)), 'querytype=WINDOW') = 'TRUE'
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 859ms, total time loading 1 features: 859ms.
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 859ms.
FINEST [oracle.sdovis.RE] xfm: 2.1666666666666665 0.0 0.0 -2.1666666666666665 0.0 198.5
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 16ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 16ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.SRS] *** isGeodetic=true, unit=DECIMAL DEGREE
FINEST [oracle.sdovis.SRS] before adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
FINEST [oracle.sdovis.SRS] After adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-20
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: 3.173803526448353,-90.0,356.82619647355165,90.0
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv WHERE MDSYS.SDO_FILTER(tb_prv.IMAGE.SPATIALEXTENT, MDSYS.SDO_GEOMETRY(2003, 8307, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?, ?, ?, ?)), 'querytype=WINDOW') = 'TRUE'
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 0ms, total time loading 1 features: 0ms.
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 16ms.
FINEST [oracle.sdovis.RE] xfm: 2.2055555555555553 0.0 0.0 -2.2055555555555553 -6.99999999999992 198.50000000000003
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 15ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 31ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.DBMapMaker] adding predefined theme [name=GEORTHEME]
FINEST [oracle.sdovis.ThemeTable] key_column using default: ROWID
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-22
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
FINEST [oracle.sdovis.theme.grtp] Bands: Red - 1 Green - 1 Blue - 1
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-24
WARN [oracle.sdovis.theme.grtp] GeoRaster SRID can not be 0.
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.SRS] *** isGeodetic=true, unit=DECIMAL DEGREE
FINEST [oracle.sdovis.SRS] before adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
FINEST [oracle.sdovis.SRS] After adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-26
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: 3.173803526448353,-90.0,356.82619647355165,90.0
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv WHERE MDSYS.SDO_FILTER(tb_prv.IMAGE.SPATIALEXTENT, MDSYS.SDO_GEOMETRY(2003, 8307, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?, ?, ?, ?)), 'querytype=WINDOW') = 'TRUE'
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 765ms, total time loading 1 features: 765ms.
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 765ms.
FINEST [oracle.sdovis.RE] xfm: 2.2055555555555553 0.0 0.0 -2.2055555555555553 -6.99999999999992 198.50000000000003
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 31ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 125ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.DBMapMaker] adding predefined theme [name=GEORTHEME]
DEBUG [oracle.sdovis.ThemeTable] Got SRID for base table NYP_IMAGES from data source cache
FINEST [oracle.sdovis.ThemeTable] key_column using default: ROWID
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-28
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
For the image i want to view, the data i got for the image that is being stored in the georaster object are:
IMAGE(RASTERTYPE, SPATIALEXTENT(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELE
SDO_GEORASTER(20001, SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003,
1), SDO_ORDINATE_ARRAY(-180, -90, -180, 1073, -180, 2237, 1320, 2237, 2821, 223
7, 2821, 1073, 2821, -90, 1320, -90, -180, -90)), 'NYP_IMAGES_RDT', 131, XMLTYPE
(<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectI))
May i know whether the image is georeferenced?
If it is successfully georeference, why does it stated that no spatial data to render?
Regards,
EstherIMAGE_ID IMAGE_DESCRIPTION
IMAGE(RASTERTYPE, SPATIALEXTENT(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELE
161 TIFF
SDO_GEORASTER(20001, SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003,
1), SDO_ORDINATE_ARRAY(-180, -90, -180, 1073, -180, 2237, 1320, 2237, 2821, 223
7, 2821, 1073, 2821, -90, 1320, -90, -180, -90)), 'NYP_IMAGES_RDT', 131, XMLTYPE
(<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectInfo>
<rasterType>20001</rasterType>
<isBlank>false</isBlank>
<defaultRed>1</defaultRed>
<defaultGreen>1</defaultGreen>
<defaultBlue>1</defaultBlue>
</objectInfo>
<rasterInfo>
<cellRepresentation>UNDEFINED</cellRepresentation>
<cellDepth>4BIT</cellDepth>
<totalDimensions>2</totalDimensions>
<dimensionSize type="ROW">
<size>2327</size>
</dimensionSize>
<dimensionSize type="COLUMN">
<size>3001</size>
</dimensionSize>
<ULTCoordinate>
<row>0</row>
<column>0</column>
</ULTCoordinate>
<blocking>
<type>REGULAR</type>
<totalRowBlocks>10</totalRowBlocks>
<totalColumnBlocks>12</totalColumnBlocks>
<rowBlockSize>256</rowBlockSize>
<columnBlockSize>256</columnBlockSize>
</blocking>
<interleaving>BIP</interleaving>
<pyramid>
<type>DECREASE</type>
<resampling>NN</resampling>
<maxLevel>3</maxLevel>
</pyramid>
<compression>
<type>NONE</type>
</compression>
</rasterInfo>
<spatialReferenceInfo>
<isReferenced>true</isReferenced>
<isRectified>true</isRectified>
<SRID>82394</SRID>
<spatialResolution dimensionType="X">
<resolution>28.5</resolution>
</spatialResolution>
<spatialResolution dimensionType="Y">
<resolution>28.5</resolution>
</spatialResolution>
<modelCoordinateLocation>UPPERLEFT</modelCoordinateLocation>
<modelType>FunctionalFitting</modelType>
<polynomialModel rowOff="0" columnOff="0" xOff="0" yOff="0" zOff="0" rowScal
e="1" columnScale="1" xScale="1" yScale="1" zScale="1">
<pPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>-479.9329824561403 0 0.03508771929824561</polyno
mialCoefficients>
</pPolynomial>
<qPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</qPolynomial>
<rPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>43256.28210526316 -0.03508771929824561 0</polyno
mialCoefficients>
</rPolynomial>
<sPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</sPolynomial>
</polynomialModel>
</spatialReferenceInfo>
<layerInfo>
<layerDimension>BAND</layerDimension>
<subLayer>
<layerNumber>1</layerNumber>
<layerDimensionOrdinate>0</layerDimensionOrdinate>
<layerID>subLayer1</layerID>
<colorMap>
<colors>
<cell value="0" blue="0" red="0" green="0" alpha="255"/>
<cell value="1" blue="20" red="20" green="20" alpha="255"/>
<cell value="2" blue="36" red="36" green="36" alpha="255"/>
<cell value="3" blue="48" red="48" green="48" alpha="255"/>
<cell value="4" blue="52" red="52" green="52" alpha="255"/>
<cell value="5" blue="72" red="72" green="72" alpha="255"/>
<cell value="6" blue="121" red="121" green="121" alpha="255"/>
<cell value="7" blue="133" red="133" green="133" alpha="255"/>
<cell value="8" blue="153" red="153" green="153" alpha="255"/>
<cell value="9" blue="178" red="178" green="178" alpha="255"/>
<cell value="10" blue="178" red="178" green="186" alpha="255"/>
<cell value="11" blue="186" red="186" green="186" alpha="255"/>
<cell value="12" blue="198" red="198" green="214" alpha="255"/>
<cell value="13" blue="230" red="230" green="234" alpha="255"/>
IMAGE_ID IMAGE_DESCRIPTION
IMAGE(RASTERTYPE, SPATIALEXTENT(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELE
<cell value="14" blue="242" red="242" green="242" alpha="255"/>
<cell value="15" blue="255" red="255" green="255" alpha="255"/>
</colors>
</colorMap>
</subLayer>
</layerInfo>
</georasterMetadata>
Is this being georeferenced? -
Unable to view the appraisal document in PMS
Hi,
We have upgraded our system from 7.01 to 7.4 and ECC from EHP4 to EHP7.
After upgrade we are not able to open the appraisal document from
Appraisal Inbox (Performance management) page/Employee & Reviewer Inbox
page but getting blank screen.
We had refer the note 1600380, according to the note we had checked the objects in all pages mentioned.
But then also unable to view the appraisal document.
Refer the attachment.
Kindly guide us to resolve the issue.
Regards-
PoonamHi ,
Before upgrade it was working fine, There is no change in the authorisation in the backend.
Kindly specify what kind of authorisation are required, so that we can check at our level.
No error messages and logs are generated related to this.
Regards-
Poonam -
Unable to restart the messages in SXI_MONITOR?
Hi,
Message is in scheduled status and I checked the queue and it is throwing error text as "object is currently locked by the user xyz" then I deleted the entry in the queue. Using SXI_Monitor when I am restarting the particular messages I am unable to restart the message as it is throwing error text "message is currently locked by user xyz" How to unlock this particular message? Any help on this greatly appreciated. Appreciate for your response.
Thanks,
Daniel.LAHi Daniel
Refer the below links
/people/riyaz.sayyad/blog/2006/12/08/dealing-with-errors-on-the-outbound-side
/people/riyaz.sayyad/blog/2006/04/27/enhanced-message-monitoring-using-runtime-workbench-and-adapter-monitor
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
SXMB_MONI & SXI_MONITOR (both are same) are used to check the message status on Integration server (XI pipeline) and SXI_MONITOR is part of SXMB_MONI.
http://help.sap.com/saphelp_nw2004s/helpdata/en/f7/c8d34213d9324fa3329dcdf8e7be16/content.htm
Real time XI Monitoring
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9a5c3bab977239e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/88/21bc3ff6beeb0ce10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbc7d790-0201-0010-bea6-c549902e93e2
http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/96/0a2441509fa831e10000000a1550b0/content.htm
Hope it will help u .....
Thanks !
Pls reward if useful -
Unable to view sent message from one of my email accounts
I have two email addresses from my email server. On one of the accounts, I am unable to view the text of the messages in the sent mailbox and I get the following message:
The message from (my email address is shown here) concerning “Insurance” has not been downloaded from the server. You need to take this account online in order to download it.
The server says there is nothing in my sent box on the server to download. I have selected the choice in the preferences area that says to delete messages from the server "right away" when they are downloaded.Patrick,
If running Tiger, see:
http://discussions.apple.com/thread.jspa?threadID=413196
If running 10.3.9, as your Profile says, then you likely have an "Overstuffed" Sent mailbox. See the Topic at the following link, and the topic linked from within it:
http://discussions.apple.com/thread.jspa?threadID=121837
and
http://docs.info.apple.com/article.html?artnum=25812
Ernie -
After idoc regenration unable to view the field in IDOC
Hi,
I have enhanced the business partner by EEWB.
After tha i have regenarted the message type CRMXIF_PARTNER_SAVE and bo type BUS1006 by Tcode BDFG.
After that also i am unable to view the field in Basin type CRMXIF_PARTNER_SAVE01 [message type CRMXIF_PARTNER_SAVE ].
New Zfield added through EEWB is available in CRMXIF_PARTNER_COMPLEX structre.But not coming in IDOC.
Please advice.
Regards
MalayHi,
From your thread i have understood that the EEWB extended fields have not appeared in the IDoc after regeneration.
For the customer enhancements there are some of the XIF segments provided by SAP to transport them to IDoc structure.
Now that you have added the customer fields using EEWB. Please add the fields
to CRMXIF_CUSTOMER_H and then regenerate the IDOC using BDFG.
After extending these above mentioned structure kindly regenerate the Idoc Structures. I recommend
not to add the enhancement fields to the CRMXIF_PARTNER_COMPLEX structure which might lead
to inconsistency.
You can make use of CRMXIF_CUSTOMER_H for customer enhancements.
Regards,
Venkat -
Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Unable to view the output of a concurrent program
Dear Members,
I am using Oracle R12.1.3 Vision Instance.
I have run the Create Accounting program. When I click on the view output button, the browser gets displayed and also gets closed immediately. I am unable to view the output.
Can any one please help me in resolving this issue?
Many thanks in advance.
Regards.Dear Members,
I am facing the above problem in IE.
When I tried in Mozilla, I can view the outputs without any issues.
Can any one suggest me why I am not able to view the output in the IE?
Regards. -
How to delete the messages from SXMB_MONI which are already cancelled .
Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM -
How to delete the messages from sxmb_moni with status cancelled
Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
SumanI think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
1. In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
2. Select the job(s) to be scheduled.
3. Specify the start time and date.
4. Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.
Maybe you are looking for
-
SIGSEGV signal (no mapping at the fault address) : in _XmAddHashEntry
I have ported a motif based program from Compaq Tru 64(in Tru 64 program is running without any problem) to Solaris 8. I have used Forte developer 6 C++ compiler. Program compiled & linked successsfull. But during runtime 'XmCreateMainWindow' method
-
I purchased a movie on iTunes and it it stuck . It has been downloading for the past 24 hours and won't move. Can't cancel either. What should I do? Please help :)
-
Hello All, I am using PNP LDP on my report, the authorization are skipping some personnel numbers saying insufficient authorization. But my program requires all the personnel number to be downloaded, please let me know how this can be achieved. Thank
-
Are there any compatibility issues with AirPort Extreme 802.11n and Maverick OS X
Are there any reported issues?
-
Configuring mavericks macbookpro17 or newer macs for correct 10bit dreamcolor
I cannot get a good answer for required configuration to get true 10 bit input to my new DreamColor display. The monitor lets me select 709, p3, AdobeRGB and the display changes appropriately, but it is not clear if I am getting 8 or 10 bit input ove