Unattended install of oracle ODBC client

Hi,
I'm trying to install the Oracle ODBC client on a W2K server. This server is a Terminal server. This server is being installed completely unattended. For one of our new programs on the server we need an ODBC connection to our Oracle Server. We tried the connection and it worked fine.
Now we need of course to make the installation unattended, and there comes the problem. I've been testing with responsefiles and silent install, but that gives me an error/warning that the "temporary location can not be openend. Verify the 'source'". I don't know what the message means.
Does anyone have an idea how I can do this installation without the oracle installer, or is there an easier way.
Or does anyone have a solution to this problem I'm having with the responsefile.
Thanks,
YO

re,
after I try to change the inventory dir in the rsp file from
/op/ora to
/usr
ORACLE_HOME=/usr
s_mountPoint=/usr/datafiles
and try again
./runInstaller -silent -noconfig -responseFile /home/oracle/install/ora/ora_10.1.0.3/Disk1/new.rsp
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8 or UnitedLinux-1.0
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 7303 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1537MB Passed
You do not have sufficient permissions to access the inventory '/opt/ora/'. Installation cannot continue. Make sure that you have read/write permissions to the inventory directory and restart the installer.: Permission denied
The installer try to install at the wrong inventory dir.... the old one.. not the new on .........
Where does Oracle installer cashed the old rsp files???..
AND WHY ???.
Thx
Till
Edited by: user6768557 on 05.11.2008 03:50

Similar Messages

How to install the Oracle ODBC driver for all NT users

I need to schedule a task on a SQL server running on NT to access an Oracle DB.
I have installed the Oracle ODBC driver on it and it is working well under my NT account.
But the SQL scheduler runs on another NT account and the task failed.
How is it possible to install the Oracle ODBC Driver for all NT users ???
Thanks for your inputs...

http://forum.java.sun.com/thread.jsp?forum=48&thread=187964&start=0&range=15#608968
The above link is a comprehensive "How to get set up and on my way" that I made for someone else learning Oracle/jdbc. Kind of a self-help resource page. I would start from the beginning and download the newest drivers, then set up your environment,...etc.
hope this helped,
Jamie

Installing the Oracle ODBC driver

Is there any way to wrap only the oracle odbc driver in an
install program?
we want to avoid having to go through an entire oracle client
install.
Any help would be much apprecitaed.
null

Radha (guest) wrote:
: Is there any way to wrap only the oracle odbc driver in an
: install program?
: we want to avoid having to go through an entire oracle client
: install.
: Any help would be much apprecitaed.
I have the same question. The universal installer is too
complicated for simple client application connectivity
installation.
null

.oui error in the install of oracle database client in a linux CentOS

I am installing oracle database client in eqipo linux CentOS, after making all the passages for the creation of the user oracle and its groups beginning the ./runInstaller application and appears to me the following error:
./runInstaller: line 66: /install/.oiu: cannot excecute binary file
as I can solve this
they can notify me the possible solution to the following e-mail?
[email protected] or
[email protected]

You may want to check these references for CentOS install:
Installing 10g Release 2 on Centos 4.3 & 4.4
http://www.dizwell.com/prod/node/50
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b15660/toc.htm
Oracle® Database Installation Guide
10g Release 2 (10.2) for Linux x86
Part Number B15660-02
Installing Oracle 10.2.0.1 on CentOS 5.0 (x86_64)
http://bderzhavets.blogspot.com/2007/04/installing-oracle-10.html
Installing 9i (9.2.0.1) Database on Centos 4.5
Installing 9i (9.2.0.1) Database on Centos 4.5
installing 10.2.0 on CentOS
Re: Got "java.lang.NullPointerException" installing 10.2.0 on CentOS
Link error installing 10gR2 on CentOS 4.4
Link error installing 10gR2 on CentOS 4.4
Re: 10g in vmware Centos
10g in vmware Centos
~ Madrid.

Installing an Oracle Database client on Application Server

Hi all
I have posted before but thought I'd clean up my original question and repost - apologies but I'm desperate for help here.
I have a problem using Oracle Wallet with Application Server and Developer Suite 10g Rel 2 Software Update 10.1.2.3.0 on Windows 2003. The problem arises because the database which ships with this version of Application Server is 10.1.0.5. This database version is not compatible with Oracle Wallet external passwords eg sqlplus /@MY_WALLET_NAME.
So...to get around this I'm looking at putting the 10.2 database client on which will allow me to use sqlplus with the wallet.
My questions is:
Does anyone have any advice for retaining existing Application Server functionality (we use Discoverer, Forms and Reports (RWCLIENT)) with a new Oracle 10.2 home on the server?
I will put on the client so would expect if I copy across the tnsnames & sqlnet ora, the connectivity is all backward compatible. SQL*Plus is obviously backward compatible. I'm not familiar with Application Server so am looking for guidance on any configurations I might need to change to make sure they pick up the right Oracle Home. For example, with the new Oracle Home at the start of the %PATH%, will RWCLIENT work as normal?
Thanks,
Tom
Edited by: R_Norvegicus on Sep 27, 2010 3:19 AM
Edited by: R_Norvegicus on Sep 27, 2010 3:36 AM

Nothing special. Oracle Client installation is very simple.
Client Installation Guide for 32-Bit Windows Contents / Search / Index / PDF
http://download-east.oracle.com/docs/pdf/A95494_01.pdf
Joel Pérez

Unattended install oracle ODBC

Hi,
I'm trying to install the Oracle ODBC client on a W2K server. This server is a Terminal server. This server is being installed completely unattended. For one of our new programs on the server we need an ODBC connection to our Oracle Server. We tried the connection and it worked fine.
Now we need of course to make the installation unattended, and there comes the problem. I've been testing with responsefiles and silent install, but that gives me an error/warning that the "temporary location can not be openend. Verify the 'source'". I don't know what the message means.
Does anyone have an idea how I can do this installation without the oracle installer, or is there an easier way.
Or does anyone have a solution to this problem I'm having with the responsefile.
Thanks,
YO

Ha, got it, it should be products.html not jar that I should be looking for. readme.txt is misleading.

How to install Oracle ODBC driver...?

TOM,
Presently, I have oracle client version. But there no Oracle ODBC driver in my PC. But, I want to install only Oracle ODBC driver in my PC for ODBC Connectivity purpose.
How to install & where can get the source?

I found out the real answer!!!
On another thread there was a link to the client 10g installation. I download that 480Meg monster. Unzipped the package and launced the setup.exe.
You can then install just the ODBC using the custom option. But, it will not install the tnsnames.ora file. If you have ever done this from a VB app, copy the tsnnames.ora over to the \network\admin folder. It's usually under the oracle\product\client\10.0.2\ folder. Once installed you can launch the ODBC administer either from the link Oracle installs or from the control panel.
Next, you need to make sure the folders where the .dll file is readable to the iis. Change the folder to add whatever permission group you use for iis (I happen to have setup a local users group {machinename\users}. Add them to the entire folder structure (check the embedded folders to ensure they are readable).
While setting up the ODBC, the TSN names will now be listed from the tsnnames.ora file (if properly located). To make the connection work, the userid should be 'userid;pwd=password'. Otherwise the connection failed for me.
Now, if your connection works okay from the odbc test connection, it will probably fail if accessing through iis (like from a .asp page). There are environment path variables that need to be set. Reboot the server for them to get set. Otherwise you will get a ODBC driver can not be loaded do to system error 1114 message.

Errors when installing Oracle ODBC driver

I've been trying to install the Oracle ODBC driver version 9.2 but each and every time I tried I am getting the following error messages that are preventing the Universal Installer to install it:
There was an error loading the following libraries:
areasQueries
After I hit ok, another message pops:
There was an error loading the following libraries:
WindowGeneralQueries
Does anyone have an idea on how to resolve this problem? I tried downloading from the otn web site various 9.2 releases, 9.2.0.2, 9.2.0.5 and 9.2.0.5.4 but all of them are giving me the same error message. I even uninstalled and reinstalled the JRE but still the same problem occurred.

When you install the Oracle client, a base version of the Oracle ODBC driver will be installed by default (you could customize the install not to install ODBC). Before we tackle the ODBC driver patchset instll, I'd like to make sure that the basic client software installed correctly.
- Were there any errors thrown when you tried to install the 9.2 Oracle client?
- Once you installed the Oracle client, were you able to connect to databases via SQL*Plus?
- Is the Oracle ODBC driver on the list of ODBC drivers in the ODBC Data Source Administrator?
- Can you connect to databases via the base version of the ODBC driver?
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

I can't install Oracle 10g Client in x86-64(Intel EM64T)

Dear All,
Recently, I tried to install the Oracle 10g client in Redhat Enterprise Linux 4.0 with x86-64 (Intel EM64T) platform. As I know,that is either Oracle 9i or Oracle 10g has been certified to Redhat AS 3.0 operating system.
How can I install Oracle 10g normally under all x86-64 platforms? Or, When does Oracle to release out the patch for all x86-64 versions?

Please reffer to Installation section.
Database Installation

Oracle 8i client install. at mobile PC's

Hello,
i'll try to install a Oracle 8i client at a laptop, but it failed.
I start autorun.exe. I can see the first mask, but the pick at the install-button failed.
The installation at non-mobile-computers are correct.
What can i do?
Ch. Müller

If you want to install that software you have to do it in a different Oracle Home. If you want to export a database or part of it with the export uitility of Oracle8i client you will be able to do it without installing Oracle8i Client on Oracle9i.
Joel Pérez
http://otn.oracle.com/experts

Is it possible to install oracle 11g client 32 bit and oracle 11g client 64

Hi,
I have Windows 2008 R2 64 Bit Operating Server Installed.
Other software that are Installed :
1) Visual Studio 2010 Ultimate 32 Bit.
2) Microsoft SharePoint server 2010 64 Bit.
For my development purpose I want to install both oracle 11g client 32 bit and oracle 11g client 64 on the same machine.
Is it possible to install both 32 and 64 bit instance on the same machine.
Thanks
Sambit

959211 wrote:
Hi,
I have Windows 2008 R2 64 Bit Operating Server Installed.
Other software that are Installed :
1) Visual Studio 2010 Ultimate 32 Bit.
2) Microsoft SharePoint server 2010 64 Bit.
For my development purpose I want to install both oracle 11g client 32 bit and oracle 11g client 64 on the same machine.
Is it possible to install both 32 and 64 bit instance on the same machine.
Thanks
Sambityes, possible; but minor challenge to manage dynamically
how to ensure that you actually use the flavor you desire?

Anyone installed the Oracle client software on MBP?

Hi there,
I'm running into problems installing the Oracle 10g client software (not the server) on my macbook Pro (Intel)
The instant client installs fine, but it doesn't have the tools I need (sqlldr, imp, exp). During the install the installer gives me a java UnsatifiedLinkError.
Any thoughts? Sorry if I've missed a previous thread on this, but searches turned up nothing.

So do u mean if we have SQLPLUS on the box, it implies that client tools are installed ?
and the SQLPLUS.exe is the one that indicates the existance of client tools on a box and this has to be present on the box to say that the clinet tools are installed.
Can we have client tools on the box with out SQLPLUS.?

Oracle 8 Client install

I installed the oracle 8 client for NT. Installation completed successfully. When I attempted to launch the NET8 Easy Config or the NET8 Assistant - I get the error message:
The Dynamic Link Library CORE40.dll cound not be found in specified paths - then it list all the existingpaths like WINNT, C etc etc. CAn I get so help about what exactly is going on here? Has anyone seen such message? IS it a winnt error??

Bert van Leeuwen (guest) wrote:
: I need to set up a PC that has a client program which
: performs various transactions to an oracle server. How
: do I go about setting up a PC with the absolute minimum
: oracle 8 components required to do this?
: I've tried linking my client program statically on the server
: machine, then copying it to the client machine (+- 3Mb),
: but I'm not sure how to set up the networking so that I can
: connect to the server.
You need the files sqlnet.ora and tnsnames.ora. I think the
sqlnet layer looks for them in /etc initially, or possibly
/var/opt/oracle, but setting the environment variable
"TNS_ADMIN" will override this.
If you want to link the stuff dynamically, then run ldd against
a dynamically linked executable, copy across the libraries you
need to the client, ensure that LD_LIBRARY_PATH includes the
library directory, and that TNS_ADMIN points to a functional
pair of sqlnet.ora and tnsnames.ora files. (Ie, you need a
stanza in the tnsnames.ora file that points across to the
instance on the server).
Or something like that. It's not very neat and Oracle support
would have a heart attack. Unless you are running several client
processes simultaneously static linking may be simpler.
: If I install from the CD, and only select client and
: SQL*net, the installation is 106Mb!!!
: I'm sure this should be a really common problem, please
: somebody shed some light on this...
scratches head
Dunno.
-michael
null

Oracle ADI unattend install

Can someone know how to perform the unattended install for Oracle Applications Desktop Integrators 7.2 ? Do it support response file at all ? I found a response file NT.RSP and WIN32.RSP in the installer directory, but I don't know how to use it (I filled in the content over here but the Windows prompt will occurred ? Can someone help me. Many Thanks.

Hi DB
As far as I know, ADI and Discoverer do have any dependency that should prevent you from doing what you are doing.
What is the error you get when you try to install in the same ORACLE_HOME?
Can you give more information about the errors you get when you install in separate ORACLE_HOMEs?
I assume you would have checked the install logs and application logs to determine if there is anything obvious there ?
MSK

Oracle(tm) Client and Networking Components were not found..

I installed Oracle 9i Client tools on my machine (Win2000 Server), and successfully installed the Oracle ODBC Driver, however, upon using "Oracle in OraHome92" option in my Administrative Tools System DSN I receive the following error upon attempt to connect to the database with my ASP scripts:
"The Oracle(tm) client and networking components were not found. These components are supplied by Oracle Corporation and part of Oracle Version 7.3.."
I also receive the following error on my page:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
I have tried every trick I know and at this point am out of options. If anyone has a suggestion I'd really appreciate it.
Thanx
Phil

Hi,
I have been trying to setup Microsoft ODBC drivers on my Win7 64 bit laptop to work with my code.
Every time it gives me an error msg "Oracle(tm) client and networking components were not found"
ple help me in this. i have tried downloading and installing odbc driver from oracle site but none work.
Can someone guide me as which other software need to be install.
here is the connection string I am using, please help:
strDBConnString = "Driver={Microsoft ODBC for Oracle};" & _
"CONNECTSTRING=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST="&THostName&")(PORT="&TPort&"))" & _
"(CONNECT_DATA=(SID="&TSID&")));Uid="&TUserID&";Pwd="&TPassword&";"
Thanks

Unattended install of oracle ODBC client

Similar Messages

Maybe you are looking for