#Unavailable in WEBI Report - Using OLAP Universe

Hi,
I am using BEX query (OALP Universe) to create a WEBI report, when I run the report, it shows #UNAVAILABLE in Key Figures values.
I am not using the database delegation in Key figures properties in Universe, it is default to SUM
and if i create a new report based on this universe it is displaying correct, only if i open the existing report it shows the #unavailable.
and i tested this report in webi rich client, i.e. i imported this report in WEBI rich client and ran it , it was working fine, then again i exported this report into infoview and it is working fine in Infoview, the Key figures are showing values.
I am strange of this issue...
Please let me know if you guys have any idea on this issue
Thanks in Advance.
Regards
Ram

Hi,
I am not sure if it is the same problem, but I had similar issues with measure objects coming out of the universe that were defined as "database delegated" in the universe object's properties. Basically it then forces you to always refresh when you have changed anything on the report, so that it can recalculate the measure. I am not aware of differences regarding this in Rich Client vs. InfoView, but there could be. I have seen other similar issues between the two before.
Check to see if the measures are database delegated, and change them if you can to sum or count or whatever they should be.
Hope that helps.

Similar Messages

  • How to schedule webi report using OLAP Universe

    Hi all,
    I am using the webi report which is based on BW query or cube.
    I want to schedule the webi report  which should get refreshed automatically.
    how to set the date parameter for that webi report at universe or report level.
    or shall i should create a variable at bw side i.e., (sysdate -1)  and tht variable should i use in the report or any idea..
    i am using BOE 3.1 SP3
    Integration Kit SP3
    BW 7.1
    Thanks & Regards,
    Ravi Sarma
    Edited by: Ravi Sarma on Dec 6, 2011 6:09 PM

    Hi,
    it won't be at "report-level" . those local variables are formulae used for formatting, not for user inputs / responses.
    Easiest is to use the SAP KEYDATE variable in the BEx query.
    This SAPVAR will come through as a WebI prompt like any other, and has a default value of sysdate (if not answered differently)
    As for the Scheduling mechanism, this is the same as always - done in Infoview / BILaunchPad - select the webi instance, and click Schedule .
    Regards,
    H

  • Can create Webi report using multiple universe (multiple datasource)

    Hi All,
    Can we create a Webi report from multiple universe (can say multiple dataprovider & datasource)?
    Please suggest.
    Regards,

    You can bring as many sources together into one report as you like.
    However, to use them together you must have some common dimension, such as a particular Sold To Party, Business Partner, etc. You can then use merge dimensions to develop your report but you will need to be aware that dimensions that are NOT Common to both data providers cannot be used in a table combining two data providers.
    So, if data provider one has dimensions Resort, Product and Year and a  measure object Sales Value
    while  data provider one has dimensions Resort and Year and a  measure object Cost Value, you cannot use Product in a report but you can display Resort, Year, Sales Value and Cost Value together to show you how much revenue each resort is generating each year and how much it is costing you to do so. To have product in the report table, you would need to add it to data provider two.
    Hope that clears it up for you.
    Regards,
    Mark

  • Webi reports using MSAS universe

    I am using BO XI R3.1. I have created a universe by connecting it to Microsoft Analysis services 2005. In connection, I used OLE DB for OLAP providers for MSAS 2005. I used user specified user name and password and provided a domain service account that has access on the cube. Connection is successful and it brought all objects and classes from the cube. I exported the universe and tried creating reports in Webi using it.
    In Webi, I can access the universe and see all classes and objects. But when I run the report it gives and error "Could not find data provider msolap.3 (WIS 10901)".
    I tried to investigate and changed BO service "Server Intelligent Agent" to run on the same domain account instead of local system account. In CMC I changed the user properties to enable database credentials and gave same domain user account. Still the report does not run.
    As a background, BO server is running on a separate windows 2003 server and MSAS 2005 is on a separate windows 2003 server.
    Can someone please help me on this. Does it have anything to do with kerberos setup to pass security credentials across the servers?
    Thanks
    Tarun

    Sorry Didier.
    For some reason if i save the file it is saved as 0 bytes and if i try to open directly , the zip archive is empty.
    Can you please attach this as a pdf or word document?

  • Rolling month for webi report using Univ based on BEX Query

    Dear Experts,
    I'm new to OLAP universes.
    We have a requirements of having last 12 months rolling  for given measure(Key figure) in webi report using Univ based on Bex Query.
    We require a calmonth (time dimension) object  (restricted for last 12 months) where user can drag and drop on column section of cross-tab table.  User should drag more than one Key figure ( for ex. sales rev and & qty sold) for each month
    Could you please provide me the solution to do this?
    Thanks
    Akshara

    Hi Henry,
    Thank  you for your response.
    BEx query has not been created yet. we need to create accordingly and require your help in creating the same.
    Regarding reporting requirements,  User wants to have adhoc reporting  with rolling months ( 12 months or 6 months) functionality. Users want to link any KF to this rolling months dimension.
    If we can't have this, what is the alternative that we can propose to user.
    Thanks
    Akshara.

  • Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down

    Hello,
    We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
    Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down
    Any pointers how to do it please
    Thanks
    Krishna

    Hi,
    WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
    You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
    Regards,
    Loic

  • WebI Report using BW Query

    Hi,
    I am using WebI Report using BW Query. I don't see some Formulas in Universe which is there in BEx Query.
    Did anybody face the same problem before?

    Hi,
    I meant that you should post in the forum the calculation contained in the formula that you cannot see in your universe.
    But let's start from the begining since you are new to SAP: Did you generated the universe yourself? If the formula was added in the query after the universe was created then you must refresh your universe (In the Universe designer  please select the option "Refresh structure" under the "view" menu) in order to get the newly created formula (I assume we are takling about a calculate figure here) in your universe also.
    Regards,
    Stratos

  • Error in webi against MSAS OLAP Universe

    Hi,
    We have an OLAP universe against MSAS 2008. We are at BOXI3.1 SP2. I am wondering if anyone has seen this error before
    "expression contains a function that cannot operate on more than 4,294, 967,296 tuples WIS10901".
    We get this error when we create a webi report against the universe. The only thing unique about this report query is that it has a few numerous query filters - but then the only way this error makes sense is if BO is creating MDX against multiple sets of data and then combining that based on these additional filters ( a bit different behavior than what we might expect in a relational DB with multiple query filters).
    Any suggestions on how to navigate this issue?  thank you in advance.
    Regards
    Edited by: ramaks on Jan 12, 2011 12:02 PM

    Hi,
    I am not sure if it is the same problem, but I had similar issues with measure objects coming out of the universe that were defined as "database delegated" in the universe object's properties. Basically it then forces you to always refresh when you have changed anything on the report, so that it can recalculate the measure. I am not aware of differences regarding this in Rich Client vs. InfoView, but there could be. I have seen other similar issues between the two before.
    Check to see if the measures are database delegated, and change them if you can to sum or count or whatever they should be.
    Hope that helps.

  • Create a Webi report using QAAWS as a data source

    Hi Experts,
    I am on BO 4.1 SP 3, and using the Webi Rich Client to create a WEBi report using a QAAWS url as a data soruce.
    This is the first time I am trying this, so any tips/helpful links are welcome.
    I get the below error, when I try to map the fields. But I do not have any personal data files involved.
    Thanks,
    Vasu Natari.

    Hi Vasu,
    We can create webi report with QAAWS.When creating the report on webservices /Personal data providers we'll not get prompt/query filters option .
    Are you trying to change source ? Instead create new source and get data.

  • Created Webi report using BEx Query.

    Hi All,
    I am going to upgrade in BW and using BEx  & Webi Report. I have created webi report using BEx query. Now I need to test data in webi report.
    Can anyone tell me how to test data?
    Regards,

    Hi,
    compare the webi report data with Bex report. more you can compare webi report with SAP R3 system for random records.
    Thanks,
    Amit

  • Unable to create web reports using WAD in BI 7.0

    We are unable to create web reports using WAD in BI 7.0 because of the missing BI metadata. Please take a look at the error below .

    didnt see the error??

  • Opening XIR2 webi reports using C# code

    Hi all,
             Is it possible to open Xir2 webi reports using C# code.If so can u throw light on the same.Thanks in advance

    Check out the Dev Library:
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
    You will find a scheduling Webi sample under the BusinessObjects Enterprise|Tutorials section.
    You will the viewing code under the Report Engine .NEt Developers guide section under Application Essentials.
    Jason

  • Report on olap universe (integration kit) fails by WEBI and it runs by Rich

    I've implemented the integration Kit and an OLAP universe query based and it runs.
    I've a problem on a report that runs via Rich Client and fails via web client.
    We are on BI 7.0 sp 19. Is it necessary to upgrade to BI 7.01 SP03 or SP04 ? We've seen your interesting document about the improvement of perfomance of BI 7.01 SP04 but we'd like to upgrade our BI system 7.0 in 2 months and not now.
    Thanks in advance.
    Best Regards.

    Hi Sebastian,
    The BO XI 3.1 Fix pack Level is 1.7. We have activated traces but we don't know if the traces are java.
    We have the problem with reports with a large quantity of data, in report with a low quantity of data webi runs.
    OSS ask us to evaluate the upgrade of our SAP BI to the EHP1 03 but it requires 2 weeks and we'd like to evaluate all alternatives before to do it.
    Thanks in advance.
    Best Regards.
    M.

  • Performance Issue with Webi report uses SAP BI Query as the data source

    Hello.
    I have created a Webi ad-hoc report which connects to a SAP BI query through BO OLAP universe.
    The layout of Webi is the exactly the same as the BI query.  There are filters in the Webi to restrict the number of data extraction, but even with data result of 5000 rows, it took about 30 seconds.
    If I execute the BI query with the same filter restriction, it tooks less than 10 seconds.
    It seems that large percentage of time is consumed at the MDX part.
    Is there any tuning method that could speed up the process time of MDX?
    Thank you.
    Justine
    Edited by: Justine Liu on Mar 18, 2009 6:59 AM

    Hi,
    please take a look here:
    [https://service.sap.com/sap/support/notes/1142664] (Look under related notes)
    It includes references to various performance improvements of the MDX interface. From what I saw there it is advisable to upgrade your SAP BI (7.0)  up to at least Support Package 21 (you are currently on SP 15).
    This may also be interesting for you: There is a new Fix Pack 1.4 coming out for BOBJ XI 3.1. Combined with the related SAP Enh.Pack (not sure about the version of this one) should also improve WebI performance. This fix pack is not yet officially released though but it should not take look.
    I recommend that you try the upgrade to Support Package 21 first.
    BTW it is also advisable to take a look in the results of your MDX query (e.g using the MDXTEST transaction). You should make sure that your query is indeed restricted as expected. Sometimes the results you see in SAP native reporting tools (e.g. BEx Analyzer) differ from those returned from the MDX component, depending on the way variables/restrictions where defined in the query designer. It is all about making sure that there is no apples/oranges comparison here.
    Regards,
    Stratos

  • Setting a Prompt value for KeyDate in WebI on SAP OLAP universe

    I have a webi report which has as its dataprovider a query against an SAP olap universe against a BEx query which has the KeyDate parameter exposed.
    Iu2019d like to get at this prompt from the SDK.
    In infoview if I run the report it pulls up the keydate prompt (a special dialogue which seems to be implemented as part of the connection definition) - this prior to pulling up the full prompts dialogue and showing all universe based @prompt filters.  In WebI I can see the prompt value entered using =UserResponse("dp.kd.value") .   So it does seem to see the keydate as a prompt of some sorts.
    I've got a little jsp that allows me to set prompts very nicely (and packeaged as a jar in the CMC that schedules ok as well) but when I put it against a report with a key date u201Cpromptu201D it just wonu2019t see it.  When I call a getCount() as below it returns 0.
    oDocumentInstance.getDataProviders().generateQueries();     
    Prompts oPrompts = oDocumentInstance.getPrompts();
    out.print(oPrompts.getCount());
    This is all in an attempt to get around the scheduler limitations of key date which would give me two queries, two universes and two reportsu2026 one report for scheduling (using a customer exit to set key date) and a second for user refresh  (with a prompted key date)  which would all be rather messey to say the least!
    So any cunning ideas on how I can get hold of this key date thingymebob in the SDK?
    (ps. "Fixed in V4" would be nice to hear as an aside to thisu2026 In playing with the ramp up Iu2019ve got the same issues however so Iu2019m not to hopefull )
    Thanks!
    Jeremy.

    Hi,
    First I think you have to create a support ticket because normally the object in the universe must be generated with data data type nad it is not the case.
    We are awere of some limitations with data types.
    Secondly, if you want to have users entering date you have to specify date in the prompt data type like this:
    <OPTIONAL><FILTER KEY="[PERIOD SD].[DB Full Date].[DB Full Date]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT CAPTION="@Prompt('Enter Date ','D',,mono,free)"></CONSTANT></CONDITION></FILTER></OPTIONAL>
    Regards
    Didier

Maybe you are looking for