Undeploy the ear files using NetWeaver
Hello colleagues,
Please Is there any method by which we can undeploy the ear files using NetWeaver Administrator(nwa).
Version 7.10.
Regards.
Hi,
as per this blog How to Read Photo from SAP system using SAP Gateway this should be possible with SP05.
also refer How To Upload and Download Files Using SAP NW Gateway SP06
Regards,
Chandra
Similar Messages
-
Error in undeployment the Ear File in oracle 10g Application server
Hii while undeploying EAR in Oracle Enterprise Manager 10g. I am getting following error message and an resoluation message,which i could not able to proceed further
An error occured while undeploying the application.Base Exception : Another operation in progress which prevents your operation from completing at this time.
Resolution : If you are using a file-based repository and there are no other concurrent operations,please use the dcmctl utility resetFile Transaction command to clean up any abnormaly terminated file-based repository operations.
I have tried undeploying 3 times via OEM then executed.
/LOCALDATA4/ora10gAS/dcmctl resetFileTransaction twice as indicated in the resolution
but error still persists.
Have restarted the server several times also but same error occurs.
Pls help me.
Thanks
Praveen TyagiCan you tell me what's the status of components (value of "In sync" column) when you run "dcmctl getState" command?
Thanks
Shail -
Deploying the WAR file in Netweaver 7.1 server
Hi,
I am new to SAP NW 7.1. I have a J2ee application which is build in non-netweaver technology.
In Netweaver 7.0 server using Visual Administrator Tool (<Drive>:\usr\sap\<SAPSID>\<Instance_Name>\j2ee\admin\go.bat)
we can use the services for the deployment of any J2EE application as EAR.
But in Netweaver 7.1 server, I am not finding the Visual Administrator Tool.
Please do let me know, How do I deploy my application EAR file in the Netweaver 7.1 server.
Thanks in Advance for the reply,
Jaga
Edited by: Jagadeeswaran Pushparaj on Feb 9, 2010 7:26 PMHello,
under NW7.1 the SDM is no longer availible.
We do not have a NWDS and the deployment of the ear file by unsing JSPM failes even after renaming it into a .sca and .sda file.
The solution in our case was to deploy the ear file by using telnet. (sounds unbelivable - but it works)
telnet localhost 5<sys#>008
user/PW
Detaild help by using the man command
DEPLOY....
It took us half a day to figure out how it works..... -
Error Undeploying a EAR File Containing Resource Adapter
Hi,
I am trying to undeploy a ear file that contains a
1) one inbound R.A(resource adapter),
2) one outbound R.A and
3) few EJBs.
The undeploy command "java -jar admin.jar undelpoy..." executes without any error, however the thread process started by the inbound adapter keep running even after undeployment.
Is there a way to cleanly undeploy a resource adapter (that would delete all the threads created by resource adapter) that's part of a ear file?
Note: The inbound adapter's deregisterEndpoint method does include the code to call the destroy method on the thread it created.
Thanks,
Bhupenhello,
have you tried including the 3rd party jar in your EAR file itself?
i use a number of external jars in my web app and ejb, including some xml parsing classes. what i did was to put them all in the EAR, at the root level, in other words, not in a sub-directory. then in my WAR's meta-inf/MANIFEST.MF file reference them in the Class-path. do simililar thing for the ejbs if necessary.
when you tried to use the inqxml instead, did you make a reference in manager/referecen.txt from your app to the inqmy library? if so, did you look into the inqmyxml.jar to see if the Node class is actually there?
regards,
wentao -
Undeployment of ear-file, "domain ... not registered" message in log
Hello,
We're developping a Java Web Application for SAP NetWeaver Web AS.
It consists of an ear-file, which contains a webmodule (war-file).
NetWeaver writes some error log messages in it's log file (defaultTrace.0.trc) when the software is undeployed from Web AS.
That should not happen.
The message looks like
[permissions_collection_operator]: domain [apps//CN.com/CN Server/servlet_jsp/cn-server/root/WEB-INF/lib/log4j12.jar] not removed, because is not registered
CN.com is the company name, cn-server the context-path.
It seems, that Web AS logs this error for every jar file it finds in web-inf/lib and some additional things.
How to avoid this message? How can the domain (or jar-file) be registered or what's needed?
Surely some simple entries must be included in the ear-file... application.xml...
application-j2ee-engine.xml...
... in any of those files. But where?
Where can one obtain detail information about the log entriesNobody an idea?
It must be possible to avoid those stupid log messages.
What is needed for deploying a jar-file inside an ear-file into the famous WEB-INF/lib - directory?
Any special steps necessary? -
Error while deploying the EAR file
Hi,
We are trying to deploy an EAR file (created through NWDS) using the SDM. But while deploying we are getting the following exception:
com.sap.sdm.util.sduread.IllFormattedSduFileException:Error during attribute reading: received exception: Error in opening zip file
Does this has something to do with the application or is it related with the WinZip software?
We deployed the same application with the same configuration previously, at that time it got deployed without any issues.
Please reply.
Thanks & regards,
SujitHi,
This is due to the corruption of EAR file, Check whether the Ear File is correct or if it has been Corrupted. Because it is unable to Read the File. If it is Corrupted just Create a New EAR file.
Regards,
Sharma. -
is it possible to include external .js file into .ear file using NetBean 5.5.1? if not, then where should I placed the external .js file and how to write the src="xxx" element? (that is , how to write the path of "xxx"?)
I am using JBOSS 4.2.2 GA as server
thx!!Even this is also not possible because, the code in that package is developed by DWR and i am just adding it to my lib folder and importing the respective classes. In the same manner i need to include the *.js* file in the JSP.It took me about 3 minutes reading through the [DWR Getting Started|http://getahead.org/dwr/getstarted] page to learn that you don't have to do any of that. Perhaps you should read that page?
-
How to create an ear file using ant script
Could you please help me in creating ear file using runAssembler task
how to call runAssembler from an <exec> task.
<exec dir="${atg.dir}/home/bin/" vmlauncher="false" executable="/runAssembler" failonerror="yes">
<arg value="-overwrite" />
<arg value="myModule.ear}"/>
<arg line="-m ${modules}" />
</exec>
I'm getting below error
[exec] The system cannot find the path specified.
Edited by: 895077 on Nov 15, 2012 10:46 PM
Edited by: 895077 on Nov 15, 2012 10:47 PM -
Minimum version required to upload and download files using Netweaver Gateway
What is the minimum service pack required to use the feature of Upload and download files using netweaver gateway. I already have a SP05
Hi,
as per this blog How to Read Photo from SAP system using SAP Gateway this should be possible with SP05.
also refer How To Upload and Download Files Using SAP NW Gateway SP06
Regards,
Chandra -
Issue in Creating EAR File Using ANT in ADF 11g of Jdeveloper11g IDE
Hi
Rookie to this ADF 11g Framework and during the exploring of ADF 11g gone through ADF essentials in OTN and i did sample application of ANT build script and in the ADF Essentials of Ant i came across creating build.xml,build.properties and finally creating WAR file and currently i want to create EAR file so that EAR file can be deployed to my oracle Weblogic server.But ADF Essentials of ANT is totally confined to build.xml,build.properties,WAR file only ! Can any one suggest me the template build.xml of EAR file of any Sample Application so that i can come across what are the patterns,jars,excluded names,included names of EAR .
Thanks In Advance,
Regards
RKRK,
There are a few options. If I were doing this today, I'd just use ojdeploy (and the ojdeploy ANT task) to create the EAR file with a minimum of fuss (refer to the JDeveloper docs for more information).
If you wanted to create an EAR file using the same technique that I used in the ADF Development Essentials article, just follow the same techniques - create an EAR file using JDeveloper and unzip it to discover the structure of what it should look like.
Best,
John -
ANT build script to deploy .EAR file SAP NetWeaver Web Application Server
Can any one please tell me to deploy the .ear file with ANT build script in SAP NetWeaver Web Application Server.
Thanks in advance.
Regards,
Venkat.Try these threads:
Re: Is there a way to start a J2EE application per command line?
Scripted WAS App Start Stop Deploy -
Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1) 1) I am using the struts and log4j frameworks and 3rd party jar files with
weblogic8.1.
2) I make the ejbs,webapplications and 3rdparty jar files, ear file the following
dir structure .And i mentioned the Class-path including all jar files in the MANIFEST
OF EAR FILE.
While deploying the ear file it is giving following error.If log4j.jar does not
mention in the Weblogic script file
java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic script
.How to make the EAR file incliding ejbjar,webapplication and 3rd party jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected]Refer to the section
Handling Utility classes
http://dev2dev.bea.com/products/wlserver/articles/musser.jsp
thanks,
Deepak
"Ashok Samrat" <[email protected]> wrote:
>
Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1) 1) I am using the struts and log4j frameworks and 3rd party jar
files with
weblogic8.1.
2) I make the ejbs,webapplications and 3rdparty jar files, ear file
the following
dir structure .And i mentioned the Class-path including all jar files
in the MANIFEST
OF EAR FILE.
While deploying the ear file it is giving following error.If log4j.jar
does not
mention in the Weblogic script file
java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic
script
How to make the EAR file incliding ejbjar,webapplication and 3rd party
jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected] -
How to read the attribute of the xml file using jaxb
Thanks,
Buddy as i have a issue i have to read the xml file using jaxb and xml file contains this data and i have read the attribute like name , desc and action for a particular menu name pls tell the code how to do this it will be a great favour to me
thanx in advance
Rasool
<contextmenu>
<menu name='Lead' >
<menuitem name='newlead' desc='New Lead' action='/leads.do?dispatch=insert' />
<menuitem name='editlead' desc='Edit Lead' action='' />
<menuitem name='leadinfo' desc='Lead Information' action='' />
</menu>
<menu name='Cases' >
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
</menu>
<menu name='Contact' >
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
</menu>
</contextmenu>What my program do is to get the encoding of XML files and convert them to UTF-8 encoding files, while I need this "encoding" information of the original XML document thus I can convert...
After reading specifications and JDOM docs, the truth turns to be disappointed, no function is provided to get this information in JDOM level 2(the current released one), while it's promissed that this function will be provided in JDOM level API....
Thanx all for your help and attention!!! -
Getting error while running the XML file using XML Publisher Desktop
Hi all,
We have successfully loaded the XML file using XML Publisher Desktop. But when we preview the same using PDF format we are getting the following error.
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\smanmadh\Desktop\ProductCompensationDT.xml
FOProcessor setLocale: en-us
java.lang.NullPointerException
at oracle.apps.xdo.template.fo.area.PageNumber.formatString(PageNumber.java:104)
at oracle.apps.xdo.template.fo.IDManager.registerId(IDManager.java:44)
at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageJoinSeq(AreaTree.java:1106)
at oracle.apps.xdo.template.fo.area.AreaTree.incrementJoinSequenceIndex(AreaTree.java:219)
at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageDocument(AreaTree.java:1089)
at oracle.apps.xdo.template.fo.area.AreaTree.forceOutput(AreaTree.java:471)
at oracle.apps.xdo.template.fo.elements.FORoot.end(FORoot.java:58)
at oracle.apps.xdo.template.fo.FOHandler.endElement(FOHandler.java:386)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
at oracle.apps.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:279)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:1022)
at RTF2PDF.runRTFto(RTF2PDF.java:626)
at RTF2PDF.runXDO(RTF2PDF.java:460)
at RTF2PDF.main(RTF2PDF.java:251)
Thanks in Advance.
Sudeep.This is BI related. You will get a quicker answer from the BI Publisher forum
BI Publisher -
Deploying the .ear file on weblogic 10.3.
I Am deploying the .ear file on weblogic 10.3. but we got the exception on deployment time mention below in mail.
1*. Unable to access the selected application.*
*2. Exception in AppMerge flows' progression*
*3. Exception in AppMerge flows' progression*
*4. VALIDATION PROBLEMS WERE FOUND problem: cvc-datatype-valid.1.1: string value '' does not match pattern for war-pathType in namespace http://java.sun.com/xml/ns/javaee:<null>; problem: cvc-datatype-valid.1.1: string value '' does not match pattern for war-pathType in namespace http://java.sun.com/xml/ns/javaee:<null>;*
*5. VALIDATION PROBLEMS WERE FOUND problem: cvc-datatype-valid.1.1: string value '' does not match pattern for war-pathType in namespace http://java.sun.com/xml/ns/javaee:<null>; problem: cvc-datatype-valid.1.1: string value '' does not match pattern for war-pathType in namespace http://java.sun.com/xml/ns/javaee:<null>;*
any body help me.Thanks in advance.Hi Crimsonious,
Did u solve your problem because i am having the same issue right now!
Carl
Maybe you are looking for
-
Steps to configure XML Gateway in Oracle
Steps to configure XML Gateway in Oracle
-
Hello QT's, I'm trying to playback some QT files, originating from cell phone cameras. Half of them work while the others won't play and result in a -2048 message. I'm looking to import into Final Cut Pro to edit together....any suggestions for conve
-
Authorisation error when trying to create .sda files
Hi , we have NW 04s with SP14 usage type MI installed. We used template wiz to configure our system. When we bring up NWA and after providing necessary information under Mobile Archive Converter we consistently get error " You are not authorized to c
-
ReSampling? Hot Swapping? What do these terms mean?
After years of digital audio I still run into terms that don't really mean anything specific to me. Could someone shed some light on what these two things refer to? Thanks a bunch!
-
In my iPhone in albums is a section called "Photo Stream." In the manual it talks about using iCoud to stream these to iCloud and then to my iMac. Photo Streaming is turned on in "Settings." I can't find this section in either iCloud or on my iMac. W