Understanding Concept of Supervisor and MSFC on Cisco siwtches

Hi
I have never worked extensively on Cisco switches. Can anyone explain me concept/features of Supervisor and MSFC. What are the types of IOS's run on these?
Is there any good link we can refer for more understanding.

Hi Darpan,
Supervisor is a switching engine and MSFC is a routing daughter card which sits on the supervisor.
Supervisor in cat6k alone is just a layer 2 switch but together with MSFC it performs like a router also.
Supervisor you can image as a layer 2 switch which stores cam entry like other layer 2 switch and perform all layer 2 functions. MSFC is a daughter card which supports all layer 3 routing like intervlan routing , routing with implementation of routing protocol like eigrp , ospf etc etc.
NOW cat6k can run in 2 modes
1) Hybrid Mode
2) Native Mode
1) Hybrid Mode : When cat6k is in Hybrid mode it has 2 different main images. One for supervisor which is a CATOS and one for MSFC which is IOS. To configre sup and msfc you have to switch between sup and msfc. To configure sup you have only set base command options and for msfc it is like regular router IOS
2) In native mode there is a single main image which is loaded on supervisor bootflash and msfc bootpath is to boot from bootflsh of msfc. In this case there is only a single imterface where you configure sup as well as msfc also.
Have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/supe_gd/01overvw.htm#wp1139726
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010e9d5.shtml
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010e9d5.shtml
HTH, if yes please rate the post
Ankur

Similar Messages

Suitable example needed to understand concepts around WSDL and usage in XI

Hi All,
How to create an WSDL from Interface Definition?What are all the pre-requisities for this step?
I know,how to create an interface when a WSDL is provided at the receiver side.However,not getting why we need a WSDL created for the sender side.
Explanation with example will aid me lot.
Regards,
M.Raj

Hi raj,
"In case of Sender SOAP adapter,we first create data type,message type,message interface,message mapping and interfce mapping in Integration repository .
Then,we go to Integration Directory,and create business service and then create a communication channel for same.then we have to choose tools->define webservice "
until this it is correct....no need to import the developed wsdl into the IR.
you have to use this generated wsdl in your external application(SOAP sonar ,WebDynproApp. or XML spy ) to invoke the webservice. (SOAP<->XI<->RFC)
and .....
when your SOAP will be the receiver you have to import the wsdl of the webservice and import it into the external def.(if ithe wsdl is provided otherwise we need to create it ...not so easy.) and in this case there is no need to create data types and message types...
cheers
Sunil.

Concept of hide and clear

Problem understanding hide and clear concept...
for example, in the code below, it works fine with the write statement and have no problem with the output value when use the back button.
however, when i use it to call a transaction (eg. mm03) and pass the value over, it seems to be a value behind (eg. when i click on row1, it gives a previously stored value. Press back button and when i click on row2, it gives me value of 1. Press back button and when i click on row5, it gives me value of 2. so the clear doesn't seem to "clear")
what could be the problem? hope to understand this concept of hide and clear better (eg. when to clear?)...
Cheers,
Charles
ABAP newbie
DATA number(18) TYPE c.
START-OF-SELECTION.
CLEAR number.
DO 9 TIMES.
    WRITE: / 'Row', (2) sy-index.
    number = sy-index.
    HIDE number.
ENDDO.
AT PF8.
CHECK NOT number IS INITIAL.
CALL TRANSACTION 'MM03'.
SET PARAMETER ID 'MAT' FIELD number.
CLEAR number.
* WRITE: / 'Cursor was in row', (2) NUMBER.

hi,
chk this.
HIDE
Basic form
HIDE f.
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas.
See Constants not allowed in HIDE area.
Effect
Retains the contents of f related to the current output line.
When the user selects the line from the list f is automatically filled with the retained value.
The selection can occur in:
AT LINE-SELECTION
AT PFx
AT USER-COMMAND
READ LINE
The contents of the field do not have to have been displayed using WRITE in order for you to retain them.
The HIDE statement does not support deep structures (structures that contain internal tables).
Useful system fields for interactive reporting are listed in the System Fields for Lists documentation.
Note
Lines or components of lines of an internal table that you address using a field symbol (see ASSIGNING addition to the READ and LOOP statements), cannot be retained using HIDE. You can store them using a global variable instead.
Note
Runtime errors:
HIDE_FIELD_TOO_LARGE: The field is too long for HIDE.
HIDE_ON_EMPTY_PAGE: HIDE not possible on an empty page.
HIDE_NO_LOCAL: HIDE not possible for a local field.
HIDE_ILLEGAL_ITAB_SYMBOL: HIDE not possible for a table line or component of a table line.
and also a sample program.
report zxy_0003.
data: begin of itab occurs 0,
field type c,
end of itab.
itab-field = 'A'. append itab.
itab-field = 'B'. append itab.
itab-field = 'C'. append itab.
itab-field = 'D'. append itab.
itab-field = 'E'. append itab.
loop at itab.
format hotspot on.
write:/ itab-field.
hide itab-field.
format hotspot off.
endloop.
at line-selection.
write:/ 'You clicked', itab-field.
It kind of "remembers" what is written, so that when you click on it, it knows what the value is.
Regards,
anver

Ask the Expert: Configuration and Troubleshooting the Cisco Application Control Engine (ACE) load balancer

With Ajay Kumar and Telmo Pereira
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about configuration and troubleshooting the Cisco Application Control Engine (ACE) load balancer with Cisco expert Ajay Kumar and Telmo Pereira. The Cisco ACE Application Control Engine Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is a next-generation load-balancing and application-delivery solution. A member of the Cisco family of Data Center 3.0 solutions, the module: Helps ensure business continuity by increasing application availability Improves business productivity by accelerating application and server performance Reduces data center power, space, and cooling needs through a virtualized architecture Helps lower operational costs associated with application provisioning and scaling
Ajay Kumar is a customer support engineer in the Cisco Technical Assistance Center in Brussels, covering content delivery network technologies including Cisco Application Control Engine, Cisco Wide Area Application Services, Cisco Content Switching Module, Cisco Content Services Switches, and others. He has been with Cisco for more than four years, working with major customers to help resolve their issues related to content products. He holds DCASI and VCP certifications.
Telmo Pereira is a customer support engineer in the Cisco Technical Assistance Center in Brussels, where he covers all Cisco content delivery network technologies including Cisco Application Control Engine (ACE), Cisco Wide Area Application Services (WAAS), and Digital Media Suite. He has worked with multiple customers around the globe, helping them solve interesting and often highly complex issues. Pereira has worked in the networking field for more than 7 years. He holds a computer science degree as well as multiple certifications including CCNP, DCASI, DCUCI, and VCP
Remember to use the rating system to let Ajay know if you have received an adequate response.
Ajay and Telmo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum Application Networking shortly after the event.
This event lasts through July 26, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

Hello Krzysztof,
Another set of good/interesting questions posted. Thanks!
I will try to clarify your doubts.
In the output below both resources (proxy-connections and ssl-connections rate) are configured with a min percentage of resources (column Min), while 'Max' is set to equal to the min.
ACE/Context# show resource usage
                                                     Allocation
        Resource         Current       Peak        Min        Max       Denied
-- outputs omitted for brevity --
proxy-connections             0      16358      16358      16358      17872
ssl-connections rate          0        626        626        626      23204
Most columns are self explanatory, 'Current' is current usage, 'Peak' is the maximum value reached, and the most important counter to monitor 'Denied' represents the amount of packets denied/dropped due to exceeding the configured limits.
On the resources themselves, Proxy-connections is simply the amount of proxied connections, in other words all connections handled at layer 7 (SSL connections are proxied, as are any connections with layer 7 load balance policies, or inspection).
So in this particular case for the proxy-connections we see that Peak is equal to the Max allocated, and as we have denies we can conclude that you have surpassed the limits for this resource. We see there were 17872 connections dropped due to that.
ssl-connections rate should be read in the same manner, however all values for this resource are in bytes/s, except for Denied counter, that is simply the amount of packets that were dropped due to exceeding this resource.
For your particular tests you have allocated a min percentage and set max equal to min, this way you make sure that this context will not use any other additional resources.
If you had set the max to unlimited during resource allocation, ACE would be allowed to use additional resources on top of those guaranteed, if those resources were available.
This might sound a great idea, but resource planning on ACE should be done carefully to avoid any sort of oversubscription, specially if you have business critical contexts.
We have a good reference for ACE resource planning that contains also description of all resources (this will help to understand the output better):
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/virtualization/guide/config.html#wp1008224
1) When a resource is utilized to its maximum limit, the ACE denies additional requests made by any context for that resource. In other words, the action is to Drop. ACE should in theory silently drop (No RST is sent back to the client). So unless we changed something on the code, this is what you should see.
To give more context, seeing resets with SSL connections is not necessarily synonym of drops. As it is usual to see them during normal transactions.
For instance Microsoft servers are usually ungracefully terminating SSL connections with RESET. Also when there is renegotiation during an SSL transaction you may see RESETS, but this will pass unnoticed for end users.
2) ACE will simply drop/ignore new connections when we reach the maximum amount of proxied connections for that context. Exisiting connections will continue there.
As ACE doesn't respond back, client would simply retransmit, and if he is lucky maybe in the next attempt he will be able to establish the connection.
To overcome the denies, you will definitely have to increase the resource allocation. This of course, assuming you are not reaching any physical limit of the box.
As mentioned setting max as unlimited might work for you, assuming there are a lot of unused resources on the box.
3) If a new connection comes in with a sticky value, that matches the sticky entry of a real server, which is already in MAXCONNS state, then both the ACE module/appliance should reject the connection and that sticky entry would be removed.
The client would at that point reestablish a new connection and ACE would associate a new sticky entry with the flow for a new RSERVER after the loadbalancing decision.
I hope this makes things clearer! Uff...
Regards,
Telmo

HT201272 You seems not to understand what I mean and what I'm having like problem. I still have my payment recut from October of this year when I bought 9 songs in the iTunes Store from my iPhone 4S. The problem is from all the 9 songs, 7 are still avail

You seems not to understand what I mean and what I'm having like problem. I still have my payment receipt from October of this year when I bought 9 songs in the iTunes Store from my iPhone 4S. The problem is from all the 9 songs I've paid for, only 7 are still available from this list on my iPhone. There is no possibility to download the other 2 without paying for them. I've spoke to the lady from Mississippi on the phone 2 days ago from about 2 hours calling from Belgium but unfortunately she couldn't help me. It's the 3rd time I complain about this. How many time shall I pay for the same songs?? If you can access my music list and my past receipts payment you will be able to find out what I mean. I went back on iTunes I've found the the songs I already downloaded in October that should be on my playlist but if I click on them it will charge me again 0,99 cents. It's been 3 years I've been using the same apple ID with my iPhones. I just wand to get my songs back without having to pay them twice or 3 times

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

HT1766 Now, I understand how the backup and restore the backup functions. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already the

Now, I understand how the backup and restore the backup features function. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already there? I really do not want any music on my iPhone because I have an iPod for that. Thanks. Hope someone can help.

When you connect your phone and start iTunes on the left side you will see your phone listed under devices.Click on te icon next to it that looks like a battery. Click on the music button at the top and uncheck the sync music box.

In an inbuild example of can .. that CAN transmit periodic vi .. i am unable to understand how the extended and standard frame is set?

In an inbuild example of can .. that CAN transmit periodic vi .. i am unable to understand how the extended and standard frame is set?
plz help me .. stuck up very badly
thanks
mahadev
Solved!
Go to Solution.

I suggest this KB which explains usage of Ext IDs with NI-CAN
http://digital.ni.com/public.nsf/allkb/2FA120A37EDBC51D86256854004FB0C7

Cucm 10.1version - training videos and hand guides on understanding voice gateway h323 and SIP? thanks

cucm 10.1version - any free training videos and hand guides on understanding voice gateway h323 and SIP and how to configure one? thanks

Learncisco gives a very good introduction to CUCM - I recommend you start there.

UNDERSTAND THE NEW DATE AND TIME DATA TYPES IN ORACLE 9I

제품 : SQL*PLUS
작성날짜 : 2001-08-01
UNDERSTAND THE NEW DATE AND TIME DATA TYPES IN ORACLE 9I
========================================================
PURPOSE
Oracle 9i 에서 소개되는 새로운 datetime data type 에 대해 소개한다.
Explanation
Example
1. Datetime Datatypes
1) TIMESTAMP
: YEAR/MONTH/DAY/HOUR/MINUTE/SECOND
2) TIMESTAMP WITH TIME ZONE
: YEAR/MONTH/DAY/HOUR/MINUTE/SECOND/
TIMEZONE_HOUR/TIMEZONE_MINUTE( +09:00 )
or TIMEZONE_REGION( Asia/Seoul )
3) TIMESTAMP WITH LOCAL TIME ZONE
: YEAR/MONTH/DAY/HOUR/MINUTE/SECOND
4) TIME WITH TIME ZONE
: HOUR/MINUTE/SECOND/TIMEZONE_HOUR/TIMEZONE_MINUTE
2. Datetime Fields
1) YEAR/MONTH/DAY/HOUR/MINUTE
2) SECOND(00 to 59.9(N) is precision) : Range 0 to 9, default is 6
3) TIMEZONE_HOUR : -12 to 13
4) TIMEZONE_MINUTE : 00 to 59
5) TIMEZONE_REGION : Listed in v$timezone_names
3. DATE 와 TIMESTAMP 와의 차이점
SQL> select hiredate from emp;
HIREDATE
17-DEC-80
20-FEB-81
SQL> alter table employees modify hiredate timestamp;
SQL> select hiredate from employees;
HIREDATE
17-DEC-80 12.00.00.000000 AM
20-FEB-81 12.00.00.000000 AM
단, 해당 Column 에 Data 가 있다면 DATE/TIMESTAMP -> TIMESTAMP WITH
TIME ZONE 으로 Convert 할 수 없다.
SQL> alter table employees modify hiredate timestamp with time zone;
alter table employees modify hiredate timestamp with time zone
ERROR at line 1:
ORA-01439: column to be modified must be empty to change datatype
4. TIMESTAMP WITH TIME ZONE Datatype
TIMESTAMP '2001-05-24 10:00:00 +09:00'
TIMESTAMP '2001-05-24 10:00:00 Asia/Seoul'
TIMESTAMP '2001-05-24 10:00:00 KST'
5. TIMESTAMP WITH LOCAL TIME ZONE Datatype
SQL> create table date_tab (date_col TIMESTAMP WITH LOCAL TIME ZONE);
SQL> insert into date_tab values ('15-NOV-00 09:34:28 AM');
SQL> select * from date_tab;
DATE_COL
15-NOV-00 09.34.28.000000 AM
SQL> alter session set TIME_ZONE = 'EUROPE/LONDON';
SQL> select * from date_tab;
DATE_COL
15-NOV-00 12.34.28.000000 AM
6. INTERVAL Datatypes
1) INTERVAL YEAR(year_precision) TO MONTH
: YEAR/MONTH
: Year_precision default value is 2
SQL> create table orders (warranty interval year to month);
SQL> insert into orders values ('2-6');
SQL> select warranty from orders;
WARRANTY
+02-06
2) INTERVAL DAY (day_precision) TO SECOND (fractional_seconds_precision)
: DAY/HOUR/MINUTE/SECOND
: Logon time 확인시 주로 사용
: day_precision range 0 to 9, default is 2
SQL> create table orders (warranty interval day(2) to second);
SQL> insert into orders values ('90 00:00:00');
SQL> select warranty from orders;
WARRANTY
+90 00:00:00.000000
7. Interval Fields
- YEAR : Any positive or negative integer
- MONTH : 00 to 11
- DAY : Any positive or negative integer
- HOUR : 00 to 23
- MINUTE : 00 to 59
- SECOND : 00 to 59.9(N) where 9(N) is precision
8. Using Time Zones
1) Database operation
- Defined at CREATE DATABASE
- Can be altered with ALTER DATABASE
- Current value given by DBTIMEZONE
2) Session operation
- Defined with environment variable ORA_SDTZ
- Can be altered with ALTER SESSION SET TIME_ZONE
- Current value given by SESSIONTIMEZONE
3) TIMESTAMP WITH LOCAL TIMEZONE
- TIME_ZONE Session parameter
: O/S Local Time Zone
Alter session set time_zone = '-05:00';
: An absolute offset
Alter session set time_zone = dbtimezone;
: Database time zone
Alter session set time_zone = local;
: A named region
Alter session set time_zone = 'America/New_York';
Reference Document
------------------

Hi ,
I am facing the same problem and my scenario is also same (BAPI's).
So can you please tell me how you overcome this problem .
Thanks,
Rahul

Concept of util and helper classes

whats the concept behind helper and util classes, how to divide code according to both perspective would any one state clear separation line b/w them.

They're just names, dude

Supervisor and Subordinate Report

Hi,
I am trying to create a HR report where one can search for an employee (who is a supervisor) and have the report return all the subordinates for that employee. I've looked into the Connect By clause but have not had much luck.
Any input would be appreciated.
Thanks

SELECT
LPAD(' ',10*(LEVEL-1)) || peo.full_name name,
org.name assignment,
job.name job,
loc.location_code location,
asg.person_id person_id
FROM
per_all_assignments_f asg,
per_all_people_f peo,
hr_locations_all loc,
hr_all_organization_units_tl org,
per_jobs_tl job
WHERE 1=1
AND peo.person_id = asg.person_id
AND NVL(peo.effective_end_date,TO_DATE('01-01-2200','dd-mm-yyyy')) > SYSDATE
AND NVL(asg.effective_end_date,TO_DATE('01-01-2200','dd-mm-yyyy')) > SYSDATE
AND asg.assignment_status_type_id = 1
AND loc.location_id = asg.location_id
AND org.organization_id = asg.organization_id
AND job.job_id = asg.job_id
START WITH 1=1
AND asg.person_id = 408
AND NVL(peo.effective_end_date,TO_DATE('01-01-2200','dd-mm-yyyy')) > SYSDATE
AND NVL(asg.effective_end_date,TO_DATE('01-01-2200','dd-mm-yyyy')) > SYSDATE
AND peo.employee_number <> 'iExpense_Admin'
CONNECT BY PRIOR
asg.person_id = asg.supervisor_id
AND NVL(peo.effective_end_date,TO_DATE('01-01-2200','dd-mm-yyyy')) > SYSDATE
AND NVL(asg.effective_end_date,TO_DATE('01-01-2200','dd-mm-yyyy')) > SYSDATE
AND peo.employee_number <> 'iExpense_Admin'
ORDER SIBLINGS BY
peo.full_name,
org.name
NOTES: The line AND asg.person_id = 408 is where you set the id of the supervisor. The lines with the NVL()'s prevent duplication of people with multiple records for the same person. (There are other ways to do this, but this works fine for this example.) The line "AND peo.employee_number <> 'iExpense_Admin'" exists to prevent infinite loops in some setups using iExpense.

Ask the Expert: Configuration, Design, and Troubleshooting of Cisco Nexus 1000

With Louis Watta
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about design, configuration, and troubleshooting of Cisco Nexus 1000V Series Switches operating inside VMware ESXi and Hyper-V with Cisco expert Louis Watta. Cisco Nexus 1000V Series Switches deliver highly secure, multitenant services by adding virtualization intelligence to the data center network. With Cisco Nexus 1000V Series Switches, you can have a consistent networking feature set and provisioning process all the way from the virtual machine access layer to the core of the data center network infrastructure.
This is a continuation of the live Webcast.
Louis Watta is a technical leader in the services organization for Cisco. Watta's primary background is in data center technologies: servers (UNIX, Windows, Linux), switches (MDS, Brocade), storage arrays (EMC, NetApp, HP), network switches (Cisco Catalyst and Cisco Nexus), and enterprise service hypervisors (VMware ESX, Hyper-V, KVM, XEN). As a Technical Leader in Technical Services, Louis currently supports beta and early field trials (EFTs) on new Cisco software and hardware. He has more than 15 years of experience in a wide variety of data center applications and is interested in data center technologies oriented toward data center virtualization and orchestration. Prior to Cisco, Louis was a system administrator for GTE Government Systems. He has a bachelor of science degree in computer science from North Carolina State University. .
Remember to use the rating system to let Louis know if you have received an adequate response.
Louis might not be able to answer each question because of the volume expected during this event. Remember that you can continue the conversation on the Data Center community Unified Computing shortly after the event.
This event lasts through Friday, JUne 14, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.
Webcast related links:
Slides
FAQ
Webcast Video Recording

Right now there is only a few features that are not supported on N1Kv on Hyper-V
They are VXLAN and QOS Fair Weighted Queuing. We are currently demoing VXLAN functionality at Microsoft TechEd Conference this week in New Orleans. So VXLAN support should be coming soon. I can't give you a specific timeline.
For Fair Weighted Queuing I'm not sure. In the VMware world we take advantage of NETIOC infrastructure. In the MS world they do not have a NETIOC infrastructure that we can use to create a similar feature.
Code base parity (as in VMware and Hyper-V VSMs running NXOS 5.x) will happen with the next major N1KV release for ESX.
Let me know if that doesn't answer your question.
thanks
louis

I don't understand correlation between ACL and dACL. If dACL is downloaded to the Catalyst switch what is the status of the ACL

Understanding ISE and dACL.
I don't understand correlation between ACL and dACL.
If dACL is downloaded to the Catalyst switch what is the status of the ACL attached to physical port. Is dACL appended to the existing ACL? When I typed ‘sh ip access-list int fa0/1’ I can see only dACL for access domain and dACL for voice domain appended to the previous dACL and no ACL lines.
Regards,
Vice

Hi,
Downloadable ACLs (dACL) are applied from your RADIUS server based on authentication and authorization policies. It overrides any standard interface ACL.
Standard interface ACLs are in place to limit traffic on the port before 802.1x or MAB authentication.
When an authenticated session terminates on the interface the standard ACL will be re-applied until the next authentication.

Concept of sparse and densely populated cubes

Hi BW Experts,
Does SAP have a concept of sparse and densely populated cubes?
Basically, are there any performance differences in a cube with little transactional data loaded and a cube with a lot of transactional data loaded?
Thanks,
Rohan

Hi dear,
about compression, refer to the following link:
http://help.sap.com/saphelp_bw33/helpdata/en/ca/aa6437e7a4080ee10000009b38f842/frameset.htm
When you compress an infocube you bring data from different requests (ID)together into one single request (even if in this case you cannot do anymore any selective deletion...)
About density and sparsity, look at Wikipedia (!!!):
http://en.wikipedia.org/wiki/Essbase
Hope it helps!
Bye,
Roberto

Employee/Supervisor and position based hierarchy combination

Hi All,
Can Employee/Supervisor and position based approval hierarchy used in the same Business Group? If I have OU1 and OU2 belonging to BG1. Can OU1 use employee supervisor and OU2 use position based?
Please throw some light on this setup and limitations.
Regards,
Praveen

Setup-->Financial Options-->Human Resources tab -->Use Approval Hierarchies check box. If you check uses approval hierarchies based on positions if not uses the employee hierarchy (supervisor in employee).
Thanks
Nagamohan

Understanding Concept of Supervisor and MSFC on Cisco siwtches

Similar Messages

Maybe you are looking for