Undo optimization of iMovie project?

I optimized my project in iMovie to change the speed and now the playback of my project is black. I tried exporting the project to iTunes but the video is simply black, even though I can hear the audio fine. What should I do? Can I undo the optimization??

When you import AVCHD, you have an opportunity to create a Camera Archive. This will keep an original copy of your AVCHD footage in case you ever need it.
If you optimize H.264 clips (and maybe some others), then iMovie creates a copy of the original clips before optimizing. You can find this copy on the same drive with your Events, in a folder called iMovie Original Movies.

Similar Messages

My iMovie project staggers/skips over my transitions...I read that I need to optimize each clip. I did this individually and it worked but was time consuming. Is there a way to optimize all of my clips at once upon import?

My iMovie project staggers/skips over my transitions...I read that I need to optimize each clip. I did this individually and it worked but was time consuming. Is there a way to optimize all of my clips at once upon import?

When you import, the import screen should give you the option to optimize clips. Select Optimize - Full Size.
I think you can also right-click on the Event Name and it will let you optimize all clips in the Event, but I haven't tried it lately.

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

Error when exporting my imovie project

Hi there,
Everytime I try to export my iMovie project I get the following error:
“Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)”
As proposed in other discussions I have optimized every single clip. However the error is still popping up. Would be much appreciated if anyone could help me.
Many thanks in advance.
Jodok
Can someone please help.
Many Thanks

OK I suggest that you right-click on your Event and see if iMovie offers to optimize your clips. This will convert them to Apple Intermediate Codec. It will place the originals in a folder called Movies/iMovie Original Movies, so you will still have a copy of the originals.
You export should go smoothly after optimizing.
If you do not optimize, then iMovie has to optimize on the fly, during the SHARE. This places a huge load on your computer. It is better to go ahead and optimize separately.
H.264 uses Group of Pictures compression. In this compression scheme, there is one full frame for every (say) 24 frames of video. The remaining frames are partial frames that contain info like what has changed since the previous frame, direction of motion, etc. Obviously, this is not good for editing, because if you edit out the full frame, the remaining frames are useless. So before editing or sharing, all these partial frames have to be resolved into full frames.
Apple Intermediate Codec is a full frame codec. Each frame has some compression, like the full frames in h.264, but all frames are full and they are independent of each other. You can cut wherever you like, and you can apply slow motion without worrying about where you start.
In Final Cut Pro X, you would use ProRes 422, another full frame codec.
You should expect Apple Intermediate Codec to be about 10X larger than the equivalent h.264 clip.

IMovie project quality poor in iDVD export

I'm having problems with the quality of iMovie projects exported to iDVD. The final dvd looks very pixelated, however, when I export the same project to iTunes and view the video on same TV, the video looks perfect...clear as a bell, when great definition.
Here's what I'm doing...
Video imported from my HD camera at Large 960x540,Optimize setting.
Clips moved from Events to Projects.
No major edits made in Projects outside of a trim or two.
Project 'Finalized.'
Project sent to iDVD via Share > iDVD.
Am I missing something? I've even tried omitting step 4 above...not finalizing. Same DVD result. The video looks perfect on my screen in both iMovie and iDVD as I work on it. Only experiencing problem with final DVD output.
I'm using iMovie 11 (v9.0.4), iDVD (v7.1.2).
This is the first time that I've used iMovie 11 to create my video before sending to iDVD. In the past, I've used iMovie HD and never had a problem with iDVD output.
Any help would be greatly appreciated. Thanks.

Hi
There are lot's of thought's about this - read as much as You want of my notes.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
DO not use - "Share to iDVD" in any iMovie version !
iMä'08 to 11 - "Share to Media Browser" and as LARGE or Medium - NOT HD or other resolutions as this too degrades the final DVD.
3. I use Apple Disk Util tool (or Roxio Toast™) to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Photo effects missing in iMovie project

I have modified photos adding effect and optimizations with iOS standard pictures editing. I can see picture effects also if I open images with iPhoto. when I add pictures to iMovie project all effect are missing, pictures are used in original format.
how I can see picture effects in iMovie?
thanks,
Mario

Something similar is happening to me. I created a project a couple of months ago in iMovie '08, and now the "upper window" thumbnails are showing with an exclamation mark - but just the video clips! The photos are still there. You can see the thumbnail with the exclamation mark and when you drag the cursor through it to see it play, it only does in the little damaged thumbnail but not in the screen. After touching it, it becomes black. It does not play at all when the project is played completely. I someone finds out how to solve this, please advise.
Thanks so much.
Lol@

IMovie projects have broken link after I moved file on external hard drive

I have all my iMovie projects on an external hard drive, and it was working fine...until I accidentally broke the links by going into my external hard drive, creating a folder I named "Videos," and dumping the "iMovie Project" folder and the "iMovie Events" folder (which iMovie automatically created for me) into my new folder. I was just trying to consolidate everything into one folder, but that messed everything up. Once I realized what I had done, it would not let me press undo. Then I dragged the iMovie Project folder and the iMovie Events folder back onto the main part where they originally were, and that did not fix it.
Does anyone have any tips on getting my links back? I'd be so appreciative!! I have almost 200 projects of my kids that I can't access now. I have iMovie '11. Thanks so much.

The iMovie projects and iMovie Events folders have to be at the root (top) level of the drive they are on (or at the top level of the User/Movies folder), otherwise iMovie 9 won't see them.
As long as you have not changed the contents of these folders, if you put them back at a root location they should automatically appear in iMovie.
Geoff.

Archiving iMovie projects

I have about 300 GB of iMovie projects which I am working through to produce DVDs. MPEG2 is Ok for quality on a TV, but I'd like to keep a higher quality version so that I can reauthor when the next generation DVD format is available.
Once I have finished with each iMovie I'd like to compress the DV .mov file and save it somewhere (probably backup to one or more DVD) to free up disk space.
Given that H264 isn't readily available today, is there a recommended way of compressing DV that gives a good trade off of file size vs quality?

I was hoping that there would be a simple "compress with xyz codec at abc settings" to get a file size for each approx 1 hour (or less) movie that I can backup to DVDR.
Yes, the app is called iDVD ;-)
Seriously speaking: DV is compressed. Compressing it more will cost you quality.
I use Retrospect backup from http://www.dantz.com/ and a stack of empty DVD-Rs. It will not compress anything on the DVDs, but it will restore exactly what you backed up. If you back up your Project folder, you will be able to restore it EXACTLY as you left it and can continue editing.
You can do this with toast if you fit the clips to the DVDs yourself, remember to copy each and every clip.
Using Retrospect you can backup and restore anything on your hard drive(s), even your System. It will keep track of what went to which DVD for you. You get incremental backups, backing up only files that changed since the last backup.
If you just export back to tape, you can never undo a title, transition or effect.

Can i move an unfinished imovie project from one mac to another

so i started a project in imovie on my parents mac and now i want to finish it off on my macbook. is there anyway I can transfer the project????

Yup. however, seeing as how it isn't finalized, well this ought to work.
1-connect up your macbook to your parents' mac (file sharing?)
2-open up iMovie (on your parents' mac)
3-click on "project library" in the upper right hand corner of your iMovie window. You should see your other hard drive there, also. drag your project to this drive. If a message comes up about "project" or "project and events", choose project and events
4-launch iMovie (on your macbook) click on Project Library. and the one your transferred should be there. drag it to the iMovie projects list and it should work
oh, one last thing. Both your parents' mac and your macbook should have the same version of iMovie for this to work, so I've been told
John b

How to move an uncompleted iMovie project from one hard drive to another?

I want to move an uncompleted iMovie project form one hard drive to another. What do I move to make sure that all of parts of the project: movies, photos, sound, are moved?
Thanks, Bruce

Hi,
You can deploy the ADF Project as an ADF Library Jar file and reuse the taskflow from that jar file in another BPM Application.

When I upload audio from itunes into my imovie project, it does not show all of the track?

Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
I have spent 10 hours trying to rectify this problem.......
can anyone help me with this problem
Peace, Love & Happiness
Jayondrums

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Importing clips from iMovie project (they keep ending up in the trash)

I have never tried to import other clips from another iMovie project before and I just tried it yesterday. This is what I did:
-I went into the other project and clicked on each individual clip from that project that I wanted (one at a time).
-I copied that clip and then saved it to the desktop
-From there I copied those clips to my external drive (which holds the new project that I am working on
-I then opened up the new project in iMovie
-I went to File<Import
-I selected the clips that I had copied over to the external drive
-I imported them
-They all showed up fine, they played fine and I was able to edit them and put them into the time line as well
The problem I face though is after I save the project and exit, the next time I open the project, each of those clips are missing and have been placed in the trash
What am I doing wrong?
Thanks ahead of time for your help!

It sounds like something may be preventing iMovie from properly saving the project on the external drive. The drive format may be wrong, or third-party software might be causing conflicts. More here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
Another possibility is that you are opening the wrong project file saved inside the iMovie 5 project. If your project was originally an iMovie 4 project converted to iMovie 5 that's an easy mistake to make. More here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1971832
Note that the copy/export/import routine you used can be simplified enormously. iMovie 5 lets us Copy and Paste clips much more simply. To copy clips from Project A to Project B, open Project A, select all the clips you want copied to Project B, choose Edit > Copy, open Project B, move the playhead where you want to place the clips, and Paste. iMovie will import all the files that support those clips from Project A to Project B. Note that it imports the entire file for the clip, not just the clip itself. That's so the clip inherits all the non-destructive editing features it had in Project A.
To avoid Project B becoming unnecessarily large, it's important to Copy and Paste all the clips you want together. If you copy two clips at the same time that share the same file iMovie imports their source file just one time. But if you Copy and Paste two clips that share the same source file separately, iMovie imports the same file twice.
Karl

Imovie won't open my imovie project

Hello,
I was working on an imovie project when imovie kept crashing. So i backed up deleted imovie and reinstalled. Now it won't open up my .rcproject file. Nothing happens. is all my work lost? Also, when it was crashing some of my viedo clips were grayed out. Now in my event library some of the clips are grayed out. Any help would be appreciated.
Thanks

Update - I've managed to restore the file from my backup but now imovie crashes everytime i try to play it, just like before.
Thanks

Unable to open iMovie project?

I made a simple iMovie 09 project and burned it to a DVD via iDVD.
Then, to save space on my HD, I moved the project to an external HD.
Now I want to go back to the project to make some edits.   But when took it out of the external HD and placed it on my desktop, I am unable to open it in iMovie.   I've tried simply clicking on the project icon as well as doing File>Import>Movie. I also tried clicking and dragging the movie icon from the desktop to iMovie with no luck. iMovie just doesn't see to want to recognize it.
Can someone help?   Thanks?

Hi
There are so many things to this.
A. Flash drive - I even don't know if they would ever work - very doubtful
B. External hard disks - MUST be Mac OS Extended (hfs) formatted -
UNIX/DOS/FAT32/Mac OS Exchange works for most other things BUT NOT FOR VIDEO no matter if iMovie, iDVD or FinalCut is used.
C. In the folder iMovie Projects - There are NO MOVIES - but text-documents related to the projects and this document points to the Raw material in iMovie Events folder and how it is supposed to be Played/Viewed in this particular project. e.g. play Clip A from 00:00:01:13 to 00:03:45:02 and so on. So there are no movies in the project folder.
D. So if both iMovie Events and iMovie Projects folder are copied over to an external hard disk - Then the iMovie in the second Mac has no links to this and will not find it.
SO to be able to work with one project on two Macs - all moving's of Events and Projects should be done within the iMovie Application - Not on DeskTop/Finder - do not alter or move any folder named
• iMovie Events
• iMovie Projects
on DeskTop/Finder - as they can mess-up and be very hard to impossible to mend.
Yours Bengt W

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

Undo optimization of iMovie project?

Similar Messages

Maybe you are looking for