Unexpected behavior of checkbox with help text
Hi everyone.
I'm using a checkbox to achieve a yes/no user input and I've noticed something strange. Whenever the user clicks on the help text (label) associated with the checkbox, the help text pops up and the checkbox changes state.
For example, if the checkbox is unchecked, if the user clicks on the label / help text, when they close the popup, the box is checked.
It's not the end of the world or anything, but could be confusing for end users and so is undesirable. Is this a known issue? Maybe something that could be changed in a future release?
regards,
Kieran
Change this -
<div id="Layer1" style="position:absolute; width:296px;
to this -
<div id="Layer1" style="position:relative; width:296px;
and reposition the div.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kc41082" <[email protected]> wrote in
message
news:ebi7s4$5bp$[email protected]..
> Can somebody please help me? I would appreciate it more
than you know. I
> am not
> all that good at writing code -- in fact, I know very
little about it.
> However,
> I love to design. Therefore, I periodically build
websites for small
> businesses
> pro bono.
>
> I built a site in Dreaamweaver using table cells. In one
of my table
> cells, I
> would like scrolling text. However, I do not want the
text to fill up the
> entire cell (margins on each side of text so it does not
extend to edges
> of
> table cell). To do this, I inserted a layer and set it
on top of the table
> cell, where I want the text. I told it to scroll when
the text overflows.
> However, although it looks fine on screen, the text
moves over to the left
> when
> I load it in my browser. I cannot figure it out!!! I
want to change it
> (maybe)
> RELATIVE (instead of absolute) to my table cell, but
can't get that to
> work. I
> have seen the code you have suggested to people , but
don't understand
> where to
> insert the code into my website.
>
> Will somebody check it out for me and offer me a
suggestion? It can't be
> too
> difficult to fix. Please visit kaycee.mutpup.com and
click on the link
> provided. It will take you to the temporary site I have
posted.
>
> THANK YOU!
>
Similar Messages
-
Unexpected behavior when moving a shape & text
Any one else run into this on Mac CS6?
I've selected a shape layer and a text layer at the same time. When I move the shape layer, the text goes in unexpected directions. But when I move the text layer, the objects move as expected. Weird!
Does CC1 and CC2014 still do this?I can replicate your behavior by selecting the text layer and the diamond layer then dragging. That's completely normal because the position parented diamond layer becomes 0,0 when parented and movement of the selected Text layer is based on the recalculated positions. When you get all layers to move together you have selected all 3 ayers. The behavior is completely normal. The only way to prevent this kind of odd movement when selecting two objects, one of which is parented to another, is to work in a square composition. If you can wrap your head around the math you'll figure out why.
-
Need help with Photoshop text?
Hi - I have been using Photoshop Elements 10 for about a year. I use it a lot to add text to images. For some reason within the last week, I am unable to add any text to images. When I try to do this (once I click on the 'T' and then click on the image where I want the text to go) Photoshop adds a layer, but will not allow me to add the text. I do not know if this is a setting, but I don't recall changing anything. I've tried Googling this but cannot find any solution that works. Everything I've found on the PS website is just how to add text, which I already do. I've also tried reinstalling my software. At this point, I do not know what else to do. Can someone help?
Hi,
See if the second option going to Edit works.
http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences
Restore default preferences
Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
Note:
Deleting the preferences file is an action that cannot be undone.
Do one of the following:
Press and hold Alt+Control+Shift (Mac: Option+Command+Shift) immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file.
Go to Edit > Preferences (Mac: Photoshop Elements > Preferences > General), click the Reset Preferences on next launch button, and then click OK. When you restart Adobe Photoshop Elements, all preferences are reset to default settings.
A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help. -
Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!
Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help... -
Help with Replacing text in a file using a vbscript
I have the following script which I am wanting to
1. Take the prf file and read it
2. Edit a line in the outlook .prf file replacing it with the text I have asked it to replace which is the full name of the user pulled from the currently logged on user
The problem I am seeing is that when the temp file is being generated it is throwing off the formatting of the file hence the script doesn't work. Can anyone help me please.
set objSysInfo = CreateObject("ADSystemInfo")
struser = objSysInfo.Username
set objUser = GetObject("LDAP://" & strUser)
strFullName = objUser.Get("displayName")
Const ForReading=1
Const ForWriting=2
Set objFSO = CreateObject("Scripting.FileSystemObject")
folder = "C:\test"
'filePath = folder & "file.txt"
filePath = "c:\test\test2007_3.prf"
Set myFile = objFSO.OpenTextFile(filePath, ForReading)
Set myTemp= objFSO.OpenTextFile(filePath & ".tmp", ForWriting, True)
Do While Not myFile.AtEndofStream
myLine = myFile.ReadLine
If InStr(myLine, "MailboxName=%UserName%") Then
myLine = "&strFullName"
End If
myTemp.WriteLine myLine
Loop
myFile.Close
myTemp.Close
objFSO.DeleteFile(filePath)
objFSO.MoveFile filePath& ".tmp", filePath
ChristopherSorry Irv,
Here is the code I have and then after that is the prf file. I think there is an issue with the file structure because if I take a regular text file and add the lines in there myself it replaces the lines, but with the prf file or even the prf file as a
text file it gives me the invalid argument message
Const filePath = "c:\test\test2007_3.txt"
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set myFile = objFSO.OpenTextFile(filePath)
fileText = myFile.ReadAll()
myFile.Close
fileText=Replace(fileText,"%UserName%","THIS_IS_THS_REPLACEMENT_TEXT")
Set myTemp= objFSO.OpenTextFile(filePath, 2, True)
myTemp.Write fileText
myTemp.Close
;Automatically generated PRF file from the Microsoft Office Customization and Installation Wizard
; Section 1 - Profile Defaults
[General]
Custom=1
ProfileName=Somthing
DefaultProfile=Yes
OverwriteProfile=Yes
ModifyDefaultProfileIfPresent=false
DefaultStore=Service1
; Section 2 - Services in Profile
[Service List]
ServiceX=Microsoft Outlook Client
ServiceEGS=Exchange Global Section
Service1=Microsoft Exchange Server
ServiceEGS=Exchange Global Section
; Section 3 - List of internet accounts
[Internet Account List]
; Section 4 - Default values for each service.
[ServiceX]
CachedExchangeMode=0x00000002
CachedExchangeSlowDetect=true
[ServiceEGS]
CachedExchangeConfigFlags=0x00000900
MailboxName=%UserName%
HomeServer=
RPCoverHTTPflags=0x0027
RPCProxyServer=
RPCProxyPrincipalName=
RPCProxyAuthScheme=0x0001
[Service1]
OverwriteExistingService=No
UniqueService=Yes
MailboxName=%UserName%
HomeServer=
OfflineAddressBookPath=%USERPROFILE%\local settings\application data\microsoft\outlook\
OfflineFolderPathAndFilename=%USERPROFILE%\local settings\application data\microsoft\outlook\outlook.ost
AccountName=Microsoft Exchange Server
DefaultAccount=TRUE
;[ServiceX]
;FormDirectoryPage=
;-- The URL of Exchange Web Services Form Directory page used to create Web forms.
;WebServicesLocation=
;-- The URL of Exchange Web Services page used to display unknown forms.
;ComposeWithWebServices=
;-- Set to true to use Exchange Web Services to compose forms.
;PromptWhenUsingWebServices=
;-- Set to true to use Exchange Web Services to display unknown forms.
;OpenWithWebServices=
;-- Set to true to prompt user before opening unknown forms when using Exchange Web Services.
; Section 5 - Values for each internet account.
; Section 6 - Mapping for profile properties
[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
OfflineAddressBookPath=PT_STRING8,0x660E
OfflineFolderPathAndFilename=PT_STRING8,0x6610
[Exchange Global Section]
SectionGUID=13dbb0c8aa05101a9bb000aa002fc45a
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
RPCoverHTTPflags=PT_LONG,0x6623
RPCProxyServer=PT_UNICODE,0x6622
RPCProxyPrincipalName=PT_UNICODE,0x6625
RPCProxyAuthScheme=PT_LONG,0x6627
CachedExchangeConfigFlags=PT_LONG,0x6629
[Microsoft Mail]
ServiceName=MSFS
ServerPath=PT_STRING8,0x6600
Mailbox=PT_STRING8,0x6601
Password=PT_STRING8,0x67f0
RememberPassword=PT_BOOLEAN,0x6606
ConnectionType=PT_LONG,0x6603
UseSessionLog=PT_BOOLEAN,0x6604
SessionLogPath=PT_STRING8,0x6605
EnableUpload=PT_BOOLEAN,0x6620
EnableDownload=PT_BOOLEAN,0x6621
UploadMask=PT_LONG,0x6622
NetBiosNotification=PT_BOOLEAN,0x6623
NewMailPollInterval=PT_STRING8,0x6624
DisplayGalOnly=PT_BOOLEAN,0x6625
UseHeadersOnLAN=PT_BOOLEAN,0x6630
UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
UseHeadersOnRAS=PT_BOOLEAN,0x6640
UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
ConnectOnStartup=PT_BOOLEAN,0x6642
DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
DisconnectOnExit=PT_BOOLEAN,0x6645
DefaultDialupConnectionName=PT_STRING8,0x6646
DialupRetryCount=PT_STRING8,0x6648
DialupRetryDelay=PT_STRING8,0x6649
[Personal Folders]
ServiceName=MSPST MS
Name=PT_STRING8,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Unicode Personal Folders]
ServiceName=MSUPST MS
Name=PT_UNICODE,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Outlook Address Book]
ServiceName=CONTAB
[LDAP Directory]
ServiceName=EMABLT
ServerName=PT_STRING8,0x6600
UserName=PT_STRING8,0x6602
UseSSL=PT_BOOLEAN,0x6613
UseSPA=PT_BOOLEAN,0x6615
EnableBrowsing=PT_BOOLEAN,0x6622
DisplayName=PT_STRING8,0x3001
ConnectionPort=PT_STRING8,0x6601
SearchTimeout=PT_STRING8,0x6607
MaxEntriesReturned=PT_STRING8,0x6608
SearchBase=PT_STRING8,0x6603
CheckNames=PT_STRING8,0x6624
DefaultSearch=PT_LONG,0x6623
[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046
FormDirectoryPage=PT_STRING8,0x0270
WebServicesLocation=PT_STRING8,0x0271
ComposeWithWebServices=PT_BOOLEAN,0x0272
PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
OpenWithWebServices=PT_BOOLEAN,0x0274
CachedExchangeMode=PT_LONG,0x041f
CachedExchangeSlowDetect=PT_BOOLEAN,0x0420
[Personal Address Book]
ServiceName=MSPST AB
NameOfPAB=PT_STRING8,0x001e3001
PathAndFilename=PT_STRING8,0x001e6600
ShowNamesBy=PT_LONG,0x00036601
; Section 7 - Mapping for internet account properties. DO NOT MODIFY.
[I_Mail]
AccountType=POP3
;--- POP3 Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- POP3 Account Settings ---
POP3Server=PT_UNICODE,0x0100
POP3UserName=PT_UNICODE,0x0101
POP3UseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
POP3Port=PT_LONG,0x0104
POP3UseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
LeaveOnServer=PT_LONG,0x1000
[IMAP_I_Mail]
AccountType=IMAP
;--- IMAP Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- IMAP Account Settings ---
IMAPServer=PT_UNICODE,0x0100
IMAPUserName=PT_UNICODE,0x0101
IMAPUseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
IMAPPort=PT_LONG,0x0104
IMAPUseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
CheckNewImap=PT_LONG,0x1100
RootFolder=PT_UNICODE,0x1101
[INET_HTTP]
AccountType=HOTMAIL
Account=PT_UNICODE,0x0002
HttpServer=PT_UNICODE,0x0100
UserName=PT_UNICODE,0x0101
Organization=PT_UNICODE,0x0107
UseSPA=PT_LONG,0x0108
TimeOut=PT_LONG,0x0209
Reply=PT_UNICODE,0x0103
EmailAddress=PT_UNICODE,0x000C
FullName=PT_UNICODE,0x000B
Connection Type=PT_LONG,0x000F
ConnectOID=PT_UNICODE,0x0010
Christopher -
I need help with my text tone and I have ring tone. no text tone for the 4s.
I need help with my text tone. I have ring tone no text tone. I have a 4s.
Hi Sarar2333! Let's get your text tones working again!
Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a. You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting. Let me know how that works out for you. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport -
Need help with cleening text during ExportAllStories (JS-CS4)
I have altered the ExportAllStories.jsx script for CS4 to export the selected TextFrame(s).
The main function are the same as in the original.
It works fine, but I need advice on how to clean the text before it gets exported to a text file.
I have tried to pass the TextFrame object myStory, as in the original script, to a function like this:
myStory = cleantext(myStory)
The function cleantext works with a text string passed to it,like this:
function cleantext(s) {
s.replace(/\u2011/g,'-');
I guess I have to extract the myStory object to a text string but haven’t succeeded yet.
Maybe the solution is to do some search and replace with GREP or other techniques?
All tips on how to proceed would be appreciated.This is how i solved my problem.
With the help from Peter Kahrels function
function replace (f, r)
app.findGrepPreferences.findWhat = f;
app.changeGrepPreferences.changeTo =r;
app.documents[0].changeGrep ()
And in my script I could easily do this:
app.findGrepPreferences = app.changeGrepPreferences = null;
story = app.selection[0].parentStory;
// Sample: Replace non-breaking hyphen (8209 -> \u2011) with a regular hyphen.
replace("/\u2011/g",'-');
app.findGrepPreferences = app.changeGrepPreferences = null;
And thereafter proceeding with the exporting stuff.
Thank you all contributors in this forum! -
I am a big iMovie fan, but I have just had a problem while attempting to create a video game trailer. I have never experienced this before, and I do not know how to get by it.
Ok. So I have 20 seconds of scrolling text, and about 28 lines of text. 247 characters with no spaces if you really want to know. I have 20 seconds of video behind it.
Here's the problem: The last five lines of text are cut off. They are completely normal: Helvectia, Bold, 16 size, Left sided, white. There is no fancy text or images around it besides for the video behind it. (It played fine before with no video behind it).
I've tried resizing the video, the text length, everything I can think of, and nothing works. Please help ASAP.
I am running this on a MacBook, iMovie '08, the total time of video is 41 seconds. The video behind the scrolling text is a .mov file.
Thanks!Note: The problem seems to have fixed itself. I do not know what the problem was, but I was messing around with the text and I noticed the missing lines were back. If anybody knows what the problem was, or wants to contribute to this post, please do so.
Thanks!
Contact: jomskylark [AT] gmail [DOT] com
Message was edited by: sky_lark -
i want to email some photos, after i click send, a warning window opens with no text. help?
No way to help without you actually sharing details
does it involve iPhoto for the Mac in any way? If so how? What version of iPhoto and of the OS? What is the exact error message? What email client do you use with iPhoto?
LN -
Help needed with oracle text special character search
Hi all
Using oracle 11g sql developer 4.0
I am facing this challenge where Oracle text when it comes to searching text that contains special character.
This what I have done so far with help of http://www.orafaq.com/forum/t/162229/
CREATE TABLE "SOS"."COMPANY"
( "COMPANY_ID" NUMBER(10,0) NOT NULL ENABLE,
"COMPANY_NAME" VARCHAR2(50 BYTE),
"ADDRESS1" VARCHAR2(50 BYTE),
"ADDRESS2" VARCHAR2(10 BYTE),
"CITY" VARCHAR2(40 BYTE),
"STATE" VARCHAR2(20 BYTE),
"ZIP" NUMBER(5,0)
) SEGMENT CREATION IMMEDIATE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "USERS" ;
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (1,'LSG SOLUTIONS LLC',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (2,'LOVE''S TRAVEL',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (3,'DEVON ENERGY',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (4,'SONIC INC',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (5,'MSCI',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (6,'ERNEST AND YOUNG',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (7,'JOHN DEER',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (8,'Properties@Oklahoma, LLC',null,null,null,null,null);
Insert into COMPANY (COMPANY_ID,COMPANY_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP) values (9,'D.D.T L.L.C.',null,null,null,null,null);
BEGIN
CTX_DDL.CREATE_PREFERENCE ('your_lexer', 'BASIC_LEXER');
CTX_DDL.SET_ATTRIBUTE ('your_lexer', 'SKIPJOINS', '.,@-'''); -- to skip . , @ - ' symbols
END;
CREATE INDEX my_index2 ON COMPANY(COMPANY_NAME)
INDEXTYPE IS CTXSYS.CONTEXT PARALLEL
PARAMETERS ('LEXER your_lexer');
SELECT
company_name
FROM company
WHERE CATSEARCH(company.COMPANY_NAME, 'LLC','') > 0
ORDER BY company.COMPANY_ID;
output
company_name
1 LSG SOLUTIONS LLC
2 Properties@Oklahoma, LLC
only return 2 row but should return 3I just noticed that I forgot to use an empty stoplist, so I have added that to the revised example below. Otherwise, it uses a default stoplist that would not index common single-letter words like A and I.
1. Whtat is Just search on single character 'L'? It give me error.
Since it uses the NEAR operator, searching for just one letter causes incomplete syntax, asking it to search for L near a missing second value. So, I have added additional code to allow for just one letter.
2. How do I do auto refresh on this index on datastore?
If I add "sync (on commit)" it does not refresh the previously set token.
Sync(on commit) does synchronize so that the data is immediately searchable. You have to either optimize or rebuild or drop and recreate the index to condense the rows in the domain index table.
3.lastly explanation of
<seq>NEAR((' || letters_func (:search_string) || '),1,TRUE)</seq>
<seq>NEAR((' || letters_func (:search_string) || '),100,TRUE)</seq>
<seq>NEAR((' || letters_func (:search_string) || '),100,FALSE)</seq>
why 100 true and 100 false
100 is just a default value that I used for the second parameter of near, indicating how close the letters need to be to each other. True and False are values for the third parameter of near, indicating whether or not the letters must be in the same order or not. So, it returns the results in the order of first those that are very close to one another and in the same order, then those that may be further away but in the same order, then those that may be further away and in any order.
SCOTT@orcl12c> CREATE TABLE company_near
2 (company_id NUMBER(10,0) NOT NULL ENABLE,
3 company_name VARCHAR2(50 BYTE))
4 /
Table created.
SCOTT@orcl12c> SET DEFINE OFF
SCOTT@orcl12c> BEGIN
2 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (1,'LSG SOLUTIONS LLC');
3 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (2,'LOVE''S TRAVEL');
4 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (3,'DEVON ENERGY');
5 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (4,'SONIC INC');
6 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (5,'MSCI');
7 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (6,'ERNEST AND YOUNG');
8 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (7,'JOHN DEER');
9 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (8,'Properties@Oklahoma, LLC');
10 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (9,'D.D.T L.L.C.');
11 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (10,'LSG COMPANY, LLC');
12 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (11,'LSG STAFFING, LLC');
13 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (12,'L & S GROUP LLC');
14 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (13,'L S & G, INC.');
15 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (14,'L.S.G. PROPERTIES, L.L.C.');
16 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (15,'LSGS PROPERTIES, LLC');
17 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (16,'LSQ INVESTORS, L.L.C');
18 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (17,'LHP SHERMAN/GRAYSON, LLC');
19 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (18,'Walmart');
20 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (19,'Wal mart');
21 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (20,'LSG Property Investments, L.L.C.');
22 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (21,'1224 S GALVESTON AVE, LLC');
23 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (22,'1527 S GARY AVE, LLC');
24 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (23,'FIFTEENTH STREET GRILL');
25 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (24,'Massa Lobortis LLP');
26 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (25,'Risus A Inc.');
27 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (26,'Dollar $ store');
28 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (27,'L.O.V.E., INC. ');
29 Insert into COMPANY_NEAR (COMPANY_ID,COMPANY_NAME) values (28,'J-MART LLC ');
30 END;
31 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE OR REPLACE FUNCTION letters_func
2 (p_string IN VARCHAR2)
3 RETURN VARCHAR2
4 AS
5 v_string VARCHAR2(4000);
6 BEGIN
7 FOR i IN 1 .. LENGTH (p_string)
8 LOOP
9 IF REGEXP_LIKE (SUBSTR (p_string, i, 1), '[A-Z]', 'i')
10 THEN
11 v_string := v_string || SUBSTR (p_string, i, 1) || ',';
12 END IF;
13 END LOOP;
14 v_string := RTRIM (v_string, ',');
15 RETURN v_string;
16 END letters_func;
17 /
Function created.
SCOTT@orcl12c> BEGIN
2 CTX_DDL.CREATE_PREFERENCE ('letters_datastore', 'MULTI_COLUMN_DATASTORE');
3 CTX_DDL.SET_ATTRIBUTE
4 ('letters_datastore',
5 'COLUMNS',
6 'letters_func (company_name) company_name');
7 CTX_DDL.SET_ATTRIBUTE ('letters_datastore', 'DELIMITER', 'NEWLINE');
8 END;
9 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX letters_index ON company_near (company_name)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS
4 ('DATASTORE letters_datastore
5 STOPLIST CTXSYS.EMPTY_STOPLIST
6 SYNC (ON COMMIT)')
7 /
Index created.
SCOTT@orcl12c> SELECT COUNT(*) FROM dr$letters_index$i
2 /
COUNT(*)
24
1 row selected.
SCOTT@orcl12c> VARIABLE search_string VARCHAR2(100)
SCOTT@orcl12c> EXEC :search_string := 'LSG'
PL/SQL procedure successfully completed.
SCOTT@orcl12c> SELECT SCORE(1), company_id, company_name
2 FROM company_near
3 WHERE CONTAINS
4 (company_name,
5 '<query>
6 <textquery>
7 <progression>
8 <seq>' || :search_string || '</seq>
9 <seq>NEAR((' || letters_func (:search_string) || '),1,TRUE)</seq>
10 <seq>NEAR((' || letters_func (:search_string) || '),100,TRUE)</seq>
11 <seq>NEAR((' || letters_func (:search_string) || '),100,FALSE)</seq>
12 </progression>
13 </textquery>
14 </query>',
15 1) > 0
16 ORDER BY SCORE(1) DESC
17 /
SCORE(1) COMPANY_ID COMPANY_NAME
56 1 LSG SOLUTIONS LLC
56 10 LSG COMPANY, LLC
56 11 LSG STAFFING, LLC
56 12 L & S GROUP LLC
56 13 L S & G, INC.
56 14 L.S.G. PROPERTIES, L.L.C.
56 20 LSG Property Investments, L.L.C.
56 15 LSGS PROPERTIES, LLC
31 17 LHP SHERMAN/GRAYSON, LLC
8 21 1224 S GALVESTON AVE, LLC
4 22 1527 S GARY AVE, LLC
4 23 FIFTEENTH STREET GRILL
12 rows selected.
SCOTT@orcl12c> EXEC :search_string := 'L'
PL/SQL procedure successfully completed.
SCOTT@orcl12c> /
SCORE(1) COMPANY_ID COMPANY_NAME
78 1 LSG SOLUTIONS LLC
77 8 Properties@Oklahoma, LLC
77 9 D.D.T L.L.C.
77 10 LSG COMPANY, LLC
77 11 LSG STAFFING, LLC
77 12 L & S GROUP LLC
77 28 J-MART LLC
77 2 LOVE'S TRAVEL
77 26 Dollar $ store
77 24 Massa Lobortis LLP
77 23 FIFTEENTH STREET GRILL
77 14 L.S.G. PROPERTIES, L.L.C.
77 15 LSGS PROPERTIES, LLC
77 16 LSQ INVESTORS, L.L.C
77 17 LHP SHERMAN/GRAYSON, LLC
77 20 LSG Property Investments, L.L.C.
77 21 1224 S GALVESTON AVE, LLC
77 22 1527 S GARY AVE, LLC
76 19 Wal mart
76 18 Walmart
76 27 L.O.V.E., INC.
76 13 L S & G, INC.
22 rows selected.
SCOTT@orcl12c> INSERT INTO company_near (company_id, company_name) VALUES (30, 'Laris Gordman llc.' )
2 /
1 row created.
SCOTT@orcl12c> COMMIT
2 /
Commit complete.
SCOTT@orcl12c> SELECT COUNT(*) FROM dr$letters_index$i
2 /
COUNT(*)
35
1 row selected.
SCOTT@orcl12c> EXEC :search_string := 'Laris Gordman llc.'
PL/SQL procedure successfully completed.
SCOTT@orcl12c> SELECT SCORE(1), company_id, company_name
2 FROM company_near
3 WHERE CONTAINS
4 (company_name,
5 '<query>
6 <textquery>
7 <progression>
8 <seq>NEAR((' || letters_func (:search_string) || '),1,TRUE)</seq>
9 <seq>NEAR((' || letters_func (:search_string) || '),100,TRUE)</seq>
10 <seq>NEAR((' || letters_func (:search_string) || '),100,FALSE)</seq>
11 </progression>
12 </textquery>
13 </query>',
14 1) > 0
15 ORDER BY SCORE(1) DESC
16 /
SCORE(1) COMPANY_ID COMPANY_NAME
100 30 Laris Gordman llc.
1 row selected.
SCOTT@orcl12c> EXEC CTX_DDL.OPTIMIZE_INDEX ('letters_index', 'FULL')
PL/SQL procedure successfully completed.
SCOTT@orcl12c> SELECT COUNT(*) FROM dr$letters_index$i
2 /
COUNT(*)
24
1 row selected. -
Help with dynamic text and and css !
My second question of the day.
I'm trying to build a feature in my app in which the user can
hide/reveal
bolding and or
italics and or
underlining. The text is being loaded in from an xml file
and I was thinking about styling it with css in order to get the
underlining. My problem is that the only way I can think about
pulling this off is to have a css style sheet that has a defined
bold,italic and underline class defined- - then another one that
just has a italic and underline class defined -- then another one
that has just a bold and underline class defined . . . and so on
and so on. You can see why I would prefer a much more streamlined
system. Unfortunately my experience with dynamic text styling is
somewhat limited. Hopefully someone can help me out here.Perfect. I knew it was some little snippet that I was
forgetting. I made a temporary fix of creating a 0% alpha box over
the button like a fake click area above the text, and that worked
but I know that it was a half-arsed way of working around it.
Thanks. -
Apex 4.02 BUG: text field with autocomplete. wrong help text
Following the wizard for a text field with autocomplete you reach a screen where you can enter a LOV query. The text area for the query has the following help text
Enter the query that will return the list of values. The query must select two columns in the following order, first a display value then a return value. For example:
select ename, empno
from emp
When selecting two identical columns, be sure to use unique column aliases, for example:
select ename d, ename r
from emp
However the query should return only 1 value.Thanks Rene, I have fixed that in 4.1.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
I updated my iphone 4 with ios 7.1.1 and now there is no sound with any text, any mail, application updates, no vibre call sound....its just vibrate i checked all settings plz help
i have the same problem.and i found out, if my iphone vibrates,there is a new message, but its not shown.
if i restart my iphone after these vibrations, the new messages appear.very strange.
i hope Apple will fix this problem soon. -
Help! Every app crashes when interacting with plain text files
I recently bought a 13" i7 MacBook Air. I love its design and I found OS X Lion unbelievably fast on it, yet I find myself in a very dark situation, now.
From the Finder to iA Writer, to TextEdit, every single app crashes when working with plain text files. In Finder’s column view I don’t even have to open them: the instant one .txt is selected, Finder crashes.
Creating a new user account seems to fix the bug for that account, but I just spent one whole day copying files from my old work MacBook (where Lion opened .txt files without a problem) to the new account and losing another entire day of work because of a stupid bug is out of question. Also, I feel it would be a very temporary fix. What if the bug presented itself again? Would I have to create a third, a fourth account, and so on?
I didn’t use any migration tool because I wanted a very clean installation.
On top of that, the machine is as App Store–only as one could be. The only “internet” apps I have on it are Chrome (for the occasional Flash video), Movist (I can’t work with Quicktime’s flying controls), and nvALT. I didn’t even had the time to install the Creative Suite on this one. I can’t for the life of me think this is app–related. I suspect it’s some weird OS bug.
I work in advertising, and I do some work in Adobe’s Creative Suite but *all* my copy is stored in plain text files. I always did it that way so that my files would be future–proof. It is kind of ironic now. So please, if anyone as the slightest idea of how to fix this, please, please, help. I find myself with a brand new computer I can’t use for work.
AlessandroWhat are the files named?
Where are they being made? (What folder?) -
Need help with optimizing text appearance when exporting video
Here's what I'm trying to do:
1. Convert a Powerpoint presentation to an MP4 (AVC) file, frame rate 30 (actually defaults to 29.97) and video bit rate of 1200kbps,using Wondershare PPT2VideoPro. (There are no actual video clips contained in the original PPT file).
2. Import the newly created MP4 video into a new project in Premeire Elements.
3. Add audio files (WAV) created by Audacity.
4. Export the final product as a video.
Here's the problem:
The text quality in the final exported film is very poor, and the screen occasionally seems to sublty flicker once and a while. I've tried multiple different settings, but all with the same result.
Can anyone offer suggestions on optimal settings for exporting the final product such that the text is as clear as possible? (The text in the MP4 file created by Wondershare looks great.)
Thanks!
- ErnestOne option would be to create the Text Images in Photoshop, and Save_As a PSD.
For large sets of Titles, I do the text portion in Word/WordPerfect, so I can use Spell-Check. Then in PS, I just Copy/Paste the text into an Image, where I apply all of the PS Styles that I need. Because I use PrPro for most of my NLE work, I will often do the Titles with Layered Text, and Import those as a Sequence, so that the Layers are not Flattened. This allows me to independently animate each Layer, as I need. Unfortunately, PrE does not allow one to Import the Layered PSD's, Unflattened, as it does not have Sequences.
Also note that PrE's Titler's Styles are just a starting point. Once applied, one can alter most aspects, and when they are satisfied with the changes, they can then Save the new Style and re-use it over and over. Do not forget the ability to modify those Styles.
From PowerPoint, and this depends on the version, the best that one can usually do is to Export each "slide" as a TIFF, and Import those into the NLE program.
Good luck,
Hunt
Maybe you are looking for
-
I'm trying to edit in Adobe Acrobat Pro 9
I can't seem to find an alignment tool and my text is not centering. Help please!! Thank you
-
Need Help with Photomerge Group Shot
I'm trying to photomerge a group shot and having trouble with it. The person I'm trying to cut out of the source photo gets plopped into the middle of the final photo and I can't line her up with in final shot. Is there a way I can relocate the sec
-
all of my other photoshop shortcuts are working except the 'Cntl U' and it worked fine yesterday... any ideas? I use Cs5 on an HP btw. Thanks
-
The subtitles are too small on ATV2
the subtitles are too small on ATV2, at the movies I rent, it is not possible to enjoy the movie and read the text at the same time, what makes Apple here???
-
Since GW 7.0.3 unable to get documents into remote mailboxes
I have the following problem. Some users have remote access to the mailbox and library. If a new document is created the link to the document is correctly created in the remote mailbox. If the user tries to open or view this document he is prompted t