Unexpected error when re-enabling an AD account

Hi,
I am receiving an "unexpected-error" when exporting a previously disabled account to AD as a re-enabled account.
Here's the scenario:
User is returned to the delta view, which should move them back to the Active Accounts OU (from the Inactive Accounts OU).
The export does move the user to the Acitve Accounts OU, however, the user is disabled, and the export reports "unexpected-error".
A subsequent sync will change the user to enabled without any errors.
The event viewer reports this error, that baffles me a bit:
"BAIL: MMS(1848): tower.cpp(3855): 0x80004005 (Unspecified error)
BAIL: MMS(1848): csobj.cpp(2112): 0x80004005 (Unspecified error)
BAIL: MMS(1848): expcall.cpp(864): 0x80004005 (Unspecified error)
ERR: MMS(1848): expbase.cpp(2902): PutAnchorWithDnInternal failed on CS object {CB0DE8C8-15F4-48CC-8A67-3214E4D3DE85} with 0x80004005 (pass 1 of 5)
Forefront Identity Manager 4.0.3576.2"
All my searches say a hotfix addressed this in ILM, but I'm unsure if that would be an appropriate approach for FIM.
Any ideas or suggestions are appreciated.
Thank you for any help.
Sami

Thanks Ed,
Phew, sorry to hear your case was not solved …
On the other hand, this is yet another indication and confirmation of where the issue seems to be. I was told pretty much the same by Microsoft Support. I can actually confirm, based on my tests,
that the change must have occurred between FIM and FIM R2. Code extensions originally written for MIIS worked just fine in FIM but break in FIM R2.
How come Microsoft did not anticipate that their change will break existing logic? I would have expected some kind of advanced notification/warning in the FIM R2 documents …
My problem is that we need to move on.
In absence of any solution from Microsoft after so many months, I’m reviewing our business logic to code around this new restriction; essentially I’m trying to remove the blocks of code
that would lead to such a scenario.
I’ll post an update if I hear of any resolution from Microsoft.
Radu Popa

Similar Messages

Unexpected error when trying to sign in to sync

Version 32.0.3 installed. I've been getting a message that Firefox unable to sync for the last **days So when i tried to log out of sync and log back in. I get an error "unexpected error" when i try to log in. So i tried to create a new account and get the same issue from the log in page. Have looked at everything listed on troubleshooting sync page Still the same issue.

HI mfackler,
That usually means something has gone wrong. If you have already tried to sign out and back in in accounts.firefox.com please provide the following troubleshooting information for further investigation:
* How do I turn on sync logs:
# Open about:config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
# Restart Firefox and look at: about:sync-log
# Logs and error messages will be located here
Please also use pastebin.mozilla.org for sharring any errors that relate to this issue.
Thank you.

Error when email enabling a document library

Hi - I've checked through other threads re errors when email enabling a doc library, but our scenario is a bit different. We have some custom code that creates sites based on a site template and uses data from a 3rd party system to define the site
name, permissions etc. I don't think that the process for creating the sites is relevant to the issue, but mentioning that anyway to be complete. As part of the site creation workflow, one of the document libraries is email enabled. However, on one specific
site, the document library was not email enabled. When I try and do this manually, I get the following error:
Error in the application.   at
Microsoft.SharePoint.SPList.UpdateDirectoryManagementService(String oldAlias,
String newAlias)
   at Microsoft.SharePoint.SPList.Update(Boolean
bFromMigration)
   at Microsoft.SharePoint.SPList.Update()
   at
Microsoft.SharePoint.ApplicationPages.EmailSettingsPage.SubmitButton_Click(Object
sender, EventArgs args)
   at
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler
sourceControl, String eventArgument)
   at
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)
Other tests/observations:
On the problem site, I get the same error when trying to email enable other document libraries
Other sites on the same site collection have been created using the same process/site template, and the appropriate document library was email enabled automatically (sites created both before and subsequent to this problem site)
I have successfully managed to manually email enable a document library on an different existing site
I have manually created a new site using the same site template and successfully managed to manually email enable a document library on that site
So I am fairly certain that it is nothing to do with permissions as other posts relating to this issue have suggested. Does anyone have any ideas on what is happening, how to resolve or further checks I can make? Many thanks

Hi qaaweb,
based on my experience, the issue itself may be caused by some triggers,
the permission is one of them only,
to narrow down usually, we try to update credential first, that at some environment may less impact.
example:
based on: http://technet.microsoft.com/en-us/library/cc262947.aspx, to configure email, if already configured then skip.
make sure that application pool account that is used for central admin to be the same for central admin, site and the web application.
make sure SQL server and granted DBCreator , Serveradmin, Setupadmin on service account.
remove old database and sync:
C:\program files\common files\Microsoft shared\web server extensions\12\bin>stsadm -o sync -listolddatabases 0
C:\program files\common files\Microsoft shared\web server extensions\12\bin>stsadm -o sync -deleteolddatabases 0
Update farm credentials, http://support.microsoft.com/kb/934838
if needed: central administration > Operation > Authentication provider and changed Kerberos to NTLM on central admin site.
Login service account on the SharePoint server and enable IncomingEmail settings on the web application
please let us know if the workaround is not applicable
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am getting an unexpected error when trying to install iCloud on my PC

I am trying to install iCloud on my PC and new iPhone 4S, but when my PC says there is an "unexpected error" when installing.

Hi UniversityDesigner,
Welcome to the Community!
Please go through this thread: http://forums.adobe.com/message/5581753#5581753
Thanks!
Ankit

Server Error: Unexpected Error when running Napa SharePoint 2013 App

I am getting an error "Server Error : Unexpected error" when I try to run a SharePoint 2013 app in Napa Development environment.
It starts the process normally but after it shows "Uninstalling previous version" it throws the error. This has been happening since yesterday.Someone help

I have a solution to the problem. I had a folder with a JSON file. On renaming the file to .txt, the app ran normally. I believe .json files are not supported in SharePoint hence the error.

I get an web service error when trying enable web services. I have latest update and rebooted

i get an web service error when trying enable web services. I have latest update and rebooted

hi there philnj,
could you help the community narrow troubleshooting by providing a little more information? Particularly what model printer are we dealing with?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Unexpected error when attempting to view Global Navigation (root site top navigation)

I am getting an “unexpected error” when attempting to view Navigation settings at the root site of our SharePoint environment. We are running SharePoint 2013 site collection in SharePoint 2010 compatibility mode. The error happens when you try
to view Global (Top-Level) Navigation Settings in our SharePoint root site.
(Relative URL: /_layouts/AreaNavigationSettings.aspx).
I copied the exact errors from SP Logs below. There is some null reference cited. Where is the root of the problem?   Any information would be helpful!
First, there is a general “Medium” level event that cites an Application Error
Time:
06/10/2014 11:42:01.96
Process:
w3wp.exe (0x2538)
Thread (Hex):
0x1930
Product:
SharePoint Foundation
Category:
General
EventID:
8nca
Level:
Medium
Correlation:
3194999c-3ebd-e089-7f01-acff58324051
Message:
Application error when access /_layouts/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.PublishingPage.GetEffectivePageCacheProfileId(Boolean anonUserProfile)
at Microsoft.SharePoint.Publishing.CachedPage..ctor(PublishingPage page, SPListItem altItem, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedPage.CreateCachedPage(PublishingPage page, SPListItem altItem, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedListItem.CreateCachedListItem(SPListItem item, SPListItem alternateItem, Boolean parentIsWeb, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWrappedObject(SPListItem superUserVersion, SPListItem superReaderVersion, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedArea.GetChildForListByQuery(String listName, SPQuery query, SPWeb contextWeb, Boolean onlyPopulateCache, Boolean skipIfThrottled, List`1& itemsFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.FetchDynamicItems(PublishingWeb pubWeb, NodeTypes includedTypes, Boolean& websFetched, Boolean& pagesFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildrenInner(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildren(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Then, there is the “Unexpected” level event that cites a NullReferenceException
Time: 6/10/2014 11:42:01.96
Process: w3wp.exe (0x2538)
Thread (Hex):
0x1930
Product:
SharePoint Foundation
Category: Runtime
EventID:
tkau
Level:
Unexpected
Correlation:
3194999c-3ebd-e089-7f01-acff58324051
Message:
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.PublishingPage.GetEffectivePageCacheProfileId(Boolean anonUserProfile)
at Microsoft.SharePoint.Publishing.CachedPage..ctor(PublishingPage page, SPListItem altItem, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedPage.CreateCachedPage(PublishingPage page, SPListItem altItem, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedListItem.CreateCachedListItem(SPListItem item, SPListItem alternateItem, Boolean parentIsWeb, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWrappedObject(SPListItem superUserVersion, SPListItem superReaderVersion, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedArea.GetChildForListByQuery(String listName, SPQuery query, SPWeb contextWeb, Boolean onlyPopulateCache, Boolean skipIfThrottled, List`1& itemsFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.FetchDynamicItems(PublishingWeb pubWeb, NodeTypes includedTypes, Boolean& websFetched, Boolean& pagesFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildrenInner(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildren(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi ,
According to your description, my understanding is that you encountered the error “Application error when access /_layouts/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an
object” when you try to enter Navigation Setting page.
For your issue , please refer to the blog:
http://praveenix.wordpress.com/category/uncategorized/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Portal Error:Unexpected error when trying to access gatewayed content.

hi friends...
Am encountering a Portal Error: Unexpected error when trying to access gatewayed content.
this error generally occurs on click on submit buttons..
occuring on my test portal only....
kindly help m resolve this issue...

After some research I found the following tip to be working:
https://discussions.apple.com/message/25038447#25038447
So I changed my IPv4 as well as IPv6 DNS-Servers under Windows Network Preferences and everything worked again.
HTH
Christian

FireFox keep saying "unexpected error" when trying to print web pages.

FireFox keep saying "unexpected error" when trying to print web pages. The print preview works OK, but when you try to print that "unexpected error" jumps up.
Please email me on what to do to get FireFox to work.
I don't see anything in the FAQ that might help me.

Hi,
Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

IS-H Error when entening a new bank account in Patient Admission

Hello,
We have the following IS-H Error when entering a new bank account in PatientAdmission
Bank control key and bank key do not match.
Message number: AR142
We do not have this problem when entering this bank account in Change Customer.
Thanks in advance
Best Regards

Database Vendor Code: 1005 is being passed from the database client through the report engine - unmodified. E.g.; look for the error in your database documentation.
See:
Failed to retrieve data from the database. Details: [Database Vendor Code: &lt;vendor code number&gt;].
Failed to open the connection. Details: [Database Vendor Code: &lt;vendor code number&gt;].
Compare the version of the client you are using and "other people" are using.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Unexpected Error When Creating Network

Running 10.9.1 and getting "Unexpected Error" When Creating a new network. Need help getting started.
Thanks for the support!

You need to use the alternatives under options..
It will never pick this option itself.. so click Other Options.
and use replace an existing device.
Or simply remove the existing setup and start over..
Reset to factory every time you start a setup.. and create a new network.. then reset the older units once this is working and use them to extend the network.
Personally I prefer to replace and start afresh as it just leads to less issues.
As far as range is concerned the new AC models are variously reported as excellent to worse than existing old models.. wireless is simply another form of voodoo only in white plastic instead of black.. which sort of suits the black arts better.

Encounter "500 Unexpected Error" when admin account access to ECP

Symptom：
In Exchange 2013, when using admin account to access ECP, you will get an error “500 Unexpected” as below. However, when using the same account to access OWA, everything is ok, and other normal accounts can access OWA also.
At the same time, if you check the event log, you will get the following error:
Current users: “yourdomain.com/User/admin”Request for URL 'https://servername.yourdomain.com:444/ecp/default.aspx(https://servername/ecp/)' failed with the following error: System.Configuration.ConfigurationErrorsException: “
” (hexadecimal value 0x03)is an invalid character. Line 1, position 1 (C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\quarantine\web.config line 1) ---> System.Xml.XmlException: “
” (hexadecimal value 0x03)is an invalid character. Line 1, position 1     System.Xml.XmlTextReaderImpl.Throw(String res, String[] args)     System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
System.Xml.XmlTextReaderImpl.ParseDocumentContent()     System.Configuration.XmlUtil..ctor(Stream stream, String name, Boolean readToFirstElement, ConfigurationSchemaErrors schemaErrors)     System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
Cause：
According to the error information, there are some invalid characters in the file (C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\quarantine\web.config ).
In Exchange Mailbox server, when we open this file with notepad, we will find that all the content are garbled. That is the cause.
Solution:
1. Try to copy the following code to replace the contents of the file, and save it.
2. Restart mailbox server.
<?xml version="1.0"?>
<configuration>
<location path="Quarantine.slab">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="EditQuarantineAdvFilter.aspx">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="QuarantineDetails.aspx">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="QuarantineSDO.aspx">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="ReleaseQuarantine.aspx">
    <system.web>
      <authorization>
        <allow roles="Release-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
</configuration>
Reference: https://social.technet.microsoft.com/Forums/zh-CN/74a108a8-21f3-4f5e-8fee-94942698797a/exchange-2013ecp500?forum=exchangeserverzhchs
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
According to your description, I understand that open a shared mailbox and modify the setting of Outlook Voice Access by OWA, then return an error “500 unexpected error”.
If I misunderstand your concern, please do not hesitate to let me know.
Basis on my testing, run Enable-UMMailbox to enable UM feature for shared mailbox, and enable shared mailbox account in AD. Then login OWA to double check the setting of Voice mail, everything is OK.
However, I get the same error as your mentioned when login another account in OWA and open shared mailbox to modify the setting of voice mail. Also, I get same error when doing this way to access another mailbox.
I find an similar thread about your question, it may be caused by the license of shared mailbox. For your reference:
http://community.office365.com/en-us/f/148/t/160652.aspx
Best Regards,
Allen Wang

Firefox Sync: "Unexpected error" when signing in, "Forgot Password", or Create account.

I noticed that there was a message that said reconnect to Sync. I clicked on it, and typed in my information, however, it keeps giving me an "Unexpected error" message in a red bar above my the e-mail address field. I've tried other tips, and now my bookmarks and add-ons are gone.
I was able to sign into: https://account.services.mozilla.com/. Please help me as I spent a lot of time and effort on my bookmarks.

hello hutothebert, firefox 29 and above use a new sync login system (https://accounts.firefox.com/) which isn't compatible with the old username/password/sync-key method (https://account.services.mozilla.com/) anymore.
however you could try this "hack" to get a new firefox version to connect to an old sync account:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up), right-click somewhere in that page & create a new string preference named '''services.sync.username''' with a value like '''fake'''.
afterwards you should be able to connect to the old account through the firefox options > sync panel. if this worked and you could import your data successfully, please migrate to the new sync afterwards: [[How to update to the new Firefox Sync]]

Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1

My current wireless setup is and has been the following: Phone Jack --> DSL modem ---> Airport Express via Ethernet cable
Off of that connection we've been able to wirelessly run our MacBook, Apple TV and iPhones for several years.
We recently left for vacation, so I unplugged everything (apparently a huge mistake). When we returned from vacation, the wireless connection was intermittent and kept being dropped.
If I connect the Ethernet cable directly from the modem into my MacBook the internet works fine.
I tried refreshing the Airport Express by unplugging it and cycling it through. It continued to drop.
By opening the Airport Utility, a firmware update was recommended. However, since that update the Airport Express isn't detected anymore.
I tried a hard reset and Utility finds the Airport Express under "Other Wifi Devices" but then, at the end of trying to "Join the Airport Express to the Network" I get an "Unexpected Error" message.
Airport Express Model Number: A1264
Airport Utility: 6.3.1
OS: 10.8.5
I am very frustrated and way out of my league here with understanding how this all works and what I can do to fix it. If anyone has any suggestions or expertise to offer, I would greatly appreciate it.
Thank you for your time,
Amanda

Hi AMM222,
"Unexpected Error" message with Mountain Lion and AirPort Utility 6.3.x. Hopefully this is just a matter of enabling IPv6.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
The AirPort device should now appear in AirPort Utility.
Thank you for using Apple Support Communities.
Nubz

Unexpected error when trying to reset Firefox sync

Hello,
I am trying to reset my password for Firefox sync with no success. When i enter my email address and hit "next" i get "Unexpected error". I don't want to create a new account with a different email address.
Any help is appreciated.

Hello jc_denton,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' After resetting Firefox, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Reset Firefox – easily fix most problems]] article for more information.
To Reset Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Reset Firefox" that looks like this: [[Image:Button reset]]. Click on it.
#Firefox will close and reset. After it is done, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you.

Unexpected error when re-enabling an AD account

Similar Messages

Maybe you are looking for