Unicode error in business object ECC6

Hi all,
We upgraded from 4.6c to ECC6.
While executing a business object we got the syntax following error in ECC6.
The program "Z_2005PP" is not Unicode-compatible, according to its program attributes
We dont know how to solve it, becauseZ_2005PP is a business object.
How to solve this issue?
Regards,
Kumar.

You can unicode enable the Business Objects programs by following steps :
1)     Execute PROG u2018SWO_SET_UC_FLAGu2019
2)     Provide object type.( In your case Z_2005PP )
3)     Execute.
4)     Result
This should resolve the error.
Regards,
Vasuki

Similar Messages

How to do the Unicode Check for Business Objects ?

Hi all,
How to do the Unicode Check for Business Objects ?
Note: All business Objects are stored in BOR (Business Objects Repositary)
Thanks in advance
Sri..

Hi..
i have used the UCCHECK transaction for some business Objects
For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
and for Business Objects it showing the message like : There is no program corresponding to this selection.
Why system is showing like this ?
Thanks in advance
Sri..

Unicode upgrade of Business Objects

Hi All,
Can someone let me know how to do Unicode upgrade of Business objects.
For programs, we can set the unicode attribute, in the similar way how to set this Unicode attribute for Business objects?
Amogh

Hi Amogh.
We have the same issue.
Whe are in the middle of the ABAP unicode enabling and we haven't found a solution for some customer Business Objects - e.g. Z_BUS2017. They are OK (UCCHECK transaction) but they haven't the Unicode flag. The standard Object BUS2017, program MM07MMOB have the Unicode flag activeted (view TRDIR-UCCHECK).
If you have got a solution please, advice us.
Best regards,
Carlos

Error in Business object BUS2012

Hi Friends..
If I am Going to run Standard Business object BUS2012 its working fine in local system but it was not working client system. It shows the error message like this..
"Basic idoc type PORDCR02 is not found"
so how can i solve this issue...
Thanks
Gowrishankar

Hi ..
Thanks for your reply..
Both client and local system are same version..
I think in the client system BUS2012 the idoc type prodcr02 is missing so how can i create the particular idoc for client system busines object
BUS2012.
Thanks
Gowrishankar

Error in Business Object bus2000126

Hello all,
i have given a workflow issue, in customer interaction center.
The issue is " When A OS Tech support case is created in business activity ( crmd_bus2000126 ), the case is open, and this case is assingned to a person ( field-assigned to) and if that person is not taking any action in that case for 4 hrs a notification(via email) has to send to his HR Manager and this continues for every 24hrs till the status not open (ie any other status ).
Business object - bus2000126
Delegated object - zbu2000126
For this case i am creating a fuction module to find the HR managers mail id and i am calling this function module in a method.
Error:
When i try to release the method, it said release the higher level first, so i tried to release the business object ( zbu2000126 ) but it says " SET THE STATUS FOR SUPERTYPE FIRST ".
Can any one help me on this issue.
Note: the subtype is created in one request.
the method that i want to create is in other request.
Thanks in advance

copy the code of the method, delete the method. save and generate...
then again create the method by copying the code.
sometimes it happens with no reason... may be a bug.(My trainer from SAP told me this...)
This will solve your problem first..
Another thumb rule is that object status shud be atleast implemented before releasing the method.
Based on the last error message better do the following, check the status of supertype BUS2000126. Make it to relesed if necessary.
Your problem will be solved.
Regards,
Sandeep Josyula
Reward Points if your problem solved by this..

Applet Java_Report_Panel Notinited Error in Business Objects XIR2 Webi

Hi,
I am facing a error Applet Java_Report_Panel Notinited when I want to create or edit a Web Intelligence report.
The Current version of BO is XIR2.
The version of Java installed on my machine is 1.6.0.
Whenever, I try to create or modify a new report through Infoview, I get a blank Page and at the bottom of the Infoview, it displays
Java Report Panel Notinited.
This was working fine till yesterday. There were no changes or updates done on the machine.
Just for reference, the reports work fine, when I use the other panels such as the Query-HTML and HTML Report Panel.
I had enabled all the required options in the Internet Explorer. but still, I face the Issue.
Let me know what has to be done in resolving the same.

bouser39:
This was working fine till yesterday. There were no changes or updates done on the machine
Are you absolutely sure about no changes applied? I.e. you solely are the administrator, and you have sole access to this server in regards to administration, loading patches, or other configurations? The "no init" I ran into a couple of years back and the cause was our web admin wanted to make a shorter URL appear in the address bar (something like ACME.com/BO) versus ACME.com/businessobjects/enterprise115/infoview, so he built a "virtual" web folder and had it say "BO". Well, everything worked fine in Infoview, logging in, running reports, etc, etc, however, after loading a particular service pack, and then when we went to build a new web intelligence document the whole house of cards came toppling down. Long story short, we had to forego the "BO" short name and revert back to the long URL, as ugly as it appeared, the previous method of "BO" was not longer applicable with the new "java bridge" that Business Objects had implemented with their new service pack. So, perhaps someone tried to make things more efficient for you, but in the long run actually broke a few things along the way....
Thanks,
John

Unicode error : Error in business object in transaction"SWO1'. RETURN VALUE

Hi ,
in an upgrade situation a Object Z00MARA is showing an error stating
"RETURN" is an ABAP key word and cannot be redefined as a DEFINE macro . . . .
the statement look like
DEFINE RETURN.
Thanks
richard

Hi,
I think RETURN is a key word we can not change it
please change it to d_return or something
Regards
Shiva

Runtime Error '109' - Business Object 6.5 - VBA macro

I am getting the same Runtime error '109' when trying to run my old reports(6.5) which have VBA Macros with the new XI 3.1 DeskI. Here's what I did:
1) Installed BO XI 3.1 client Tools on a machine which has BO 6.5 client tools
2) Opened the .rep in the XI 3.1 DeskI. CLick OK when it warns you that it is a earlier version and If you want to convert to new version.
Then when i try to run the report i get this error. The same .rep runs just fine with 6.5 Full Client.
Any Ideas guys? Am I missing any references or something ?
Thanks
Edited by: Larry Sherman on Aug 14, 2009 8:28 PM

Larry, I have seen some instances of VBA code not running in the new Deski version, possibly some calls are different. You will want to open an SAP incident for eng. to take a look at the VBA code.

How to write this formulas without error in Business Objects..

1: '=substr([D Bank File Warrant Status];2;1)
2: '= If [Chk Recon Check/EFT Amt] = '0' and ([Chk Recon Status Detail] = "Paid" and [Bank File Warrant Status Displayed]= 'V') then "No" else "Yes"
what is this 'v', here it gvn as void, bt i dont know how to write it in formula....
3: '=IF [Bank File Status Detail] inlist ('0V'; '0S') and [Chk Recon Check/EFT Amt] does not exist (is null) then 'Yes' else 'No'
4: '= IF [Chk Recon Status Detail] inlist ("Cancelled" or "Void" and [Bank File Warrant Amount] does not exist (is null) then 'Yes' else 'No'
plz let me know how to write them in formula asap... Thank u in advance..

Plese post your query to the [WEBI|SAP BusinessObjects Web Intelligence; forum then.
And don't forget to close this thread.
- Ludek

Desktop Intelligence: Business Objects has stopped working in Windows Vista

Hi,
We have installed the BO XI 3.1 SP3 client components in Windows Vista Machine. When I was working with Desktop Intelligence, the program keep terminates irregularly. A pop-up window would appear saying "Business Objects has stopped working. A problem caused the program to stop working correctly. Please close the program." It asks me to close the program. The window always pops up even when I just terminate the BOE normally. It sometimes pops up when I was just trying to refresh the data or in the middle of working with the application.
THanks.

Hi expert
I have install the BO XI into my laptop with 32-bit OS and Windows Vista Enterprise SP 2 but still experience the same error message "Business Objects has stopped working - A problem caused the program to stop working correctly. Please close the program".
Please help as my daily task require to use BO very often.
Thank you very much
br
Elwin

Not able to link the cloned business object in change document

Hi Experts,
I cloned standard business object FIPP. When I give the cloned busniess object in change document linkage, I am getting the error message Business object type ZFI_CREDIT has status modeled. Linkage not possible. Please let me know the proceedue to make the linkage.
Thanks in advance.
Regards,
Viven

In SWO1 you have a possibility to change the status of your custom business object into implemented.

Business Objects in Vista

Hi everyone!
I am trying to make my first steps in Business Objects and i am trying to install Business Objects Data Integrator with Windows Vista.
I recieve the error message that this product use Windows NT 4.0 or higher. I saw a message saying that Vista it is not supported . But my question is: Is there some work around to this situation?
Best Regards
João Fernandes

Hi expert
I have install the BO XI into my laptop with 32-bit OS and Windows Vista Enterprise SP 2 but still experience the same error message "Business Objects has stopped working - A problem caused the program to stop working correctly. Please close the program".
Please help as my daily task require to use BO very often.
Thank you very much
br
Elwin

SAP Log on into Business Objects server not working (Error FWB 00014)

Hello,
I recently installed Business Objects XI 3.1 Edge series, I am able to logon to enterprise and everything is working fine. I am even able to import roles from SAP system but I have two problems.
1. Logging on to enterprise using SAP user: I am getting the following error message when I choose SAP in the Athentication and enter SAP username and password and click log on.
"Account Information Not Recognized: All of your system's 0 Concurrent Access Licenses are in use at this time or your system's license key has expired. Try again later or contact your administrator to obtain additional licenses. (FWB 00014)".
2. Logging on to SAP system through SAP Logon pad: When I enter my username and passord in SAP system from the same server as I installed BusinessObjects I am getting a run time error.
Did any one of you had the same problem or does any one of you have any clue how to solve this?
Thanks in advance.

Hi,
I assume that you have a key for named licences (You can check this in the CMC under Licence keys).
What you need to do is to go in the CMC, navigate to Authentication->SAP->Options and select the Named users option.
Regards,
Stratos

Error while creating Business Object

Hello All,
I am creating one business object for the Chapter ID. But while creating API method the error message is coming up as "Parameter <parametername> does not have a reference structure".
But I already defined BAPI Structure which has the required fields and also i follow the Std. naming convenions.
Kindly guide me for the same.
Egarly Waiting for the reply.
Regards
Nilesh Shete

Hi Nilesh,
could you please go a bit more into detail?
Best would be to post the interesting parts of your source code here.
At the moment I can only guess that you created an adaptive RFC model. But did you also create a context node and bind the model to it?
What do you mean with "creating API method" and "I am creating one business object for the Chapter ID"?
Regards
Helmut

How to assign a character field to a strucure in ECC6.0 ( Unicode error)

Hi all,
This is regarding a Unicode error we are facing in upgrading a program from 4.6c to ECC6.0.
The following pice of code gives error now in ECC6.0, stating Unicode incompatible structures.
        DATA: WA_MSEG TYPE MSEG,
                   WA_MKPF TYPE MKPF.
        DATA: LE_DATA(8192) TYPE C.
        CALL FUNCTION 'ARCHIVE_GET_NEXT_RECORD'
          EXPORTING
            ARCHIVE_HANDLE                = LE_HANDLE
          GET_REAL_STRUCTURE_NAME       = 'X'
          AUTOMATIC_CONVERSION          = 'X'
          IMPORTING
            RECORD                        = LE_DATA
          RECORD_CURSOR                 =
          RECORD_FLAGS                  =
            RECORD_STRUCTURE              = LE_STRUCTURE
          RECORD_LENGTH                 =
          EXCEPTIONS
            END_OF_OBJECT                 = 1
            INTERNAL_ERROR                = 2
            WRONG_ACCESS_TO_ARCHIVE       = 3
            OTHERS                        = 4
        IF SY-SUBRC <> 0.
          EXIT.
        ENDIF.
move records
        CASE LE_STRUCTURE.
          WHEN 'MSEG'.
           <b> WA_MSEG = LE_DATA.</b>
            move-corresponding WA_MSEG to TBL_ARC_MSEG.
            APPEND TBL_ARC_MSEG.
            CLEAR: WA_MSEG, LE_DATA, TBL_ARC_MSEG.
          WHEN 'MKPF'.
          <b> WA_MKPF = LE_DATA.</b>
            move-corresponding WA_MKPF to TBL_ARC_MKPF.
            APPEND TBL_ARC_MKPF.
            CLEAR: WA_MKPF, LE_DATA, TBL_ARC_MKPF.
        ENDCASE.
Can you please suggest a way to overcome this error.
Thanks in advance,
Sreenivasa Reddy V.

IV_OFFSET is the position from the C field will be started to be read (should be 0) and EV_OFFSET is the length to which the data is going to be fetched. The Following code could be useful ---
w_len = STRLEN( p_data ).
CALL FUNCTION 'OIF_CONVERT_CHAR_TO_STRUCTURE'
EXPORTING
    iv_string         = p_data
    iv_structure_name = 'VBAK'
*    iv_offset         = w_len
IMPORTING
    ev_structure      = wa_vbak
    ev_offset         = w_len
EXCEPTIONS
    ddif_nametab_get = 1
    OTHERS            = 2.
Hope That Helps
Anirban M.

Unicode error in business object ECC6

Similar Messages

Maybe you are looking for