Unicode Export Preference for RTF

Hi,
I am exporting text in rtf format via javascript. How to set the rtf export preference to unicode?
For eg in text we do
with(app.textExportPreferences){
//Options for characterSet: TextExportCharacterSet
characterSet = TextExportCharacterSet.UTF16;
What is the equivalent for rtf?
Regards

Good news! There is no such option for RTF because you do not need it!
I was thinking, "If one can't change it then what does happen to non-ASCII characters? Maybe I could do a little testing?" And hey! it worked!

Similar Messages

IDCS3 - PDF Export Preferences for Initial View?

Is there a way to set preferences for an exported PDF's initial view? I'd like my PDFs to open as single-page (not continuous), sized to Fit In Window, without changing them manually in Acrobat. Thanks for any ideas you can offer!
Nat

That must be done in Acrobat.
Bob

Export DB for Unicode conversion by SAPInst for distributed System

Hi,
In a distributed SAP system (CI and DB on separate host),
(1) I run SAPInst to export DB for unicode conversion via system copy option in DB host. After the parameter input up to General Unload settings e.g. Unicode Target system ? Yes, Parallel import/export ? No
The following warning/error occurred and drive K:\usr\sap\MD3 is located at CI host.
How to solve it?
WARNING 2007-09-04 22:53:39
Execution of the command "K:\JDKRoot\bin\java.exe -classpath K:\usr\sap\MD3\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
ebpshd01/sapmnt/MD3/SYS/global/security/lib/tools;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/antlr.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/exception.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/jddi.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/logging.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/offlineconfiguration.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/opensqlsta.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SDMutil.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SLUtil.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/base.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/util.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/sqlserver.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/spy.jar -export -type=keydb "-expfile=D:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/usages_data.xml" -log=UTL_load_usages.log -sid=MD3 -dsn=jdbc/pool/MD3 -ssprops=K:/usr/sap/MD3/SYS/global/security/data/SecStore.properties -ssk=K:/usr/sap/MD3/SYS/global/security/data/SecStore.key" finished with return code 1. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_12-b03, mixed mode)
java.lang.NoClassDefFoundError: com/sap/engine/offline/OfflineToolStart
ERROR 2007-09-04 22:53:39
CJS-30074 Execution of UTL tool 'K:\JDKRoot\bin\java.exe -classpath K:\usr\sap\MD3\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
ebpshd01/sapmnt/MD3/SYS/global/security/lib/tools;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/antlr.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/exception.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/jddi.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/logging.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/offlineconfiguration.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/opensqlsta.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SDMutil.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SLUtil.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/base.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/util.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/sqlserver.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/spy.jar -export -type=keydb "-expfile=D:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/usages_data.xml" -log=UTL_load_usages.log -sid=MD3 -dsn=jdbc/pool/MD3 -ssprops=K:/usr/sap/MD3/SYS/global/security/data/SecStore.properties -ssk=K:/usr/sap/MD3/SYS/global/security/data/SecStore.key' aborts with return code 1. Check 'UTL_load_usages.log' and 'D:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/UTL.java.log' for more information.
ERROR 2007-09-04 22:53:39
FCO-00011 The step getUsageTypes with step key |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|5|0|getUsageTypes was executed with status ERROR .
(2) I run Table Splitting Preparation in CI host by SAPInst before using DB export option, there are some files generated under the respective folder of sapinst_instdir. Will these files in CI be used when running SAPinst in DB host for DB export option? Is it required to move these files to DB host ? which is the target location if necessary ?
Regards,
Ricky Chan

=== Reformated it and added further information ===
Hi,
In a distributed (CI and DB on separate host) SAP system NW 7.0 ABAP+JAVA usage type MI ,
(1) I run SAPInst to export DB for unicode conversion via system copy option in DB host. After the parameter input screen up to "General Unload settings" e.g. Unicode Target system ? Yes, Parallel import/export ? No
The following warning/error occurred and drive K:\usr\sap\MD3 is only located at CI host. No such folder in DB host as no SAP instance was installed in it.
============ sapins_dev.log ============
WARNING 2007-09-04 22:53:39 Execution of the command "K:\JDKRoot\bin\java.exe -classpath K:\usr\sap\MD3\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
ebpshd01/sapmnt/MD3/SYS/global/security/lib/tools;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/antlr.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/exception.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/jddi.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/logging.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/offlineconfiguration.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/opensqlsta.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SDMutil.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SLUtil.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/base.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/util.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/sqlserver.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/spy.jar -export -type=keydb "-expfile=D:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/usages_data.xml" -log=UTL_load_usages.log -sid=MD3 -dsn=jdbc/pool/MD3 -ssprops=K:/usr/sap/MD3/SYS/global/security/data/SecStore.properties -ssk=K:/usr/sap/MD3/SYS/global/security/data/SecStore.key" finished with return code 1. Output: java version "1.4.2_12" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03) Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_12-b03, mixed mode) java.lang.NoClassDefFoundError: com/sap/engine/offline/OfflineToolStart
ERROR 2007-09-04 22:53:39 CJS-30074 Execution of UTL tool 'K:\JDKRoot\bin\java.exe -classpath K:\usr\sap\MD3\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
ebpshd01/sapmnt/MD3/SYS/global/security/lib/tools;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/antlr.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/exception.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/jddi.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/logging.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/offlineconfiguration.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/opensqlsta.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SDMutil.jar;K:/usr/sap/MD3/SYS/global/sltools/sharedlib/SLUtil.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/base.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/util.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/sqlserver.jar;K:/usr/sap/MD3/SYS/exe/nuc/NTAMD64/mssjdbc/spy.jar -export -type=keydb "-expfile=D:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/usages_data.xml" -log=UTL_load_usages.log -sid=MD3 -dsn=jdbc/pool/MD3 -ssprops=K:/usr/sap/MD3/SYS/global/security/data/SecStore.properties -ssk=K:/usr/sap/MD3/SYS/global/security/data/SecStore.key' aborts with return code 1.
Check 'UTL_load_usages.log' and 'D:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/DISTRIBUTED/AS/EXPDB/UTL.java.log' for more information.
ERROR 2007-09-04 22:53:39 FCO-00011 The step getUsageTypes with step key |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|5|0|getUsageTypes was executed with status ERROR .
============
The content of file UTL.java.log:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_12-b03, mixed mode)
java.lang.NoClassDefFoundError: com/sap/engine/offline/OfflineToolStart
=============
File 'UTL_load_usages.log' does not exist in the sapinst_dir folder.
(2) I run Table Splitting Preparation in CI host by SAPInst before using DB export option, there are some files generated under the respective folder of sapinst_instdir.
Will these files in CI be used automatically when running SAPinst in DB host for DB export option?
Is it required to move these files to DB host manually? Which is the target location if necessary ?
(3) Any guide with detail on the preparation of tool or files in a standalone DB host prior to Export DB from it with SAPInst.
Regards,
Ricky Chan

Unicode Export - unable to retrieve nametab info for logic table BSEG

Hi
We are performing a unicode export (CUUC from 4.6C upgrade to ECC 6.0) and we have incurred this error.
 Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
Our OS is HPUX11.31 & Database is 10.2.0.2
myCluster (63.21.Exp): 1610: inconsistent settings for table position validity detected.
myCluster (63.21.Exp): 1611: nametab says table positions are valid.
myCluster (63.21.Exp): 1614: alternate nametab says table positions are not valid.
myCluster (63.21.Exp): 1617: for field 310 of nametab displacement is 1877, yet dbtabpos shows 1885.
myCluster (63.21.Exp): 1621: character length is 1 (in) resp. 2 (out).
myCluster (63.21.Exp): 1257: unable to retrieve nametab info for logic table BSEG .
myCluster (63.21.Exp): 8358: unable to acquire nametab info for logic table BSEG .
myCluster (63.21.Exp): 2949: failed to convert cluster data of cluster item.
myCluster: RFBLG *400**AT10**0000100000**2004*
myCluster (63.21.Exp): 322: error during conversion of cluster item.
myCluster (63.21.Exp): 323: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/SBX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SBX/SYS/exe/run/R3load: END OF LOG: 20081102104452
We checked the note 913783 as per the CUUC guide but the correction only for package SAPKB70004 to 6. but we are in package SAPKB70011.
We had found two notes:
1. Note 1238351 - Hom./Het.System Copy SAP NW 7.0 incl. Enhancement Package 1
:Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
 search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to thisline.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is(re-)started.
 search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines. "
I tried the above solution by editing the file DDL*.TPL but it is skipping the table and marks it as completed but its not the good solution as we will be miss the data from the table RFBLG.
2. Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion:
Solution
Activate the table.
Then call the RADCUCNT report. Do not change the selected parameters, but ensure that 'Overwrite Entries' is selected. Set the 'Unicode Length' to 2 and fill the last two fields 'Type' and 'Name' with TABL and TACOPAB respectively. Then select 'No Log' or specify a log name.
Execute the RADCUCNT report and restart the export.
We have not tried this solution, bcos SAP is still down and CDCLS job is still running.
We would like to know whether you have faced any issues like the above one and what is your suggested approach and solution.
Is it safe to start SAP now (when the CDCLS job runs) and then try to activate the table RFBLG?
Regards
Senthil
Edited by: J. Senthil Murugan on Nov 3, 2008 1:41 AM
Edited by: J. Senthil Murugan on Nov 3, 2008 3:36 AM

Hi Senthil,
If you have done your pre-conversion steps before upgrade and after upgrade successfully then you should not see the below errors. However changes to SPDD tables may some times also have some impact during conversion and throws nametab errors occurs. Program RADCUCNT runs in the end of upgrade to update nametab tables if any new changes happned during upgrade.
You can do any no of exports to complete jobs successfully.yeah When export running you shouldnt bring SAP up.
The tables you have mentioned all are cluster tables and CDCLS being the biggest table it will take hrs to complete depending on your size of the database.
Do not pay around with the .TSK file until if you are sure you want to re-execute it.Your first possiblility is skipped because there may be multiple same .TSK files present locally(where u r running distribution.monitor (or) sapinst ) and on the common directory. You may also look at the .TSK.bkp files because it get information and creates a new .TSK. This is not complicated but tricky.
secound possibility is to update the changed tables(eg: RFBLG...) to conversion tables.Follow the Note but make sure no R3load processes are running before you start SAP. If you dont want to wait long and sure to restart other processes which are running you can kill it and start SAP. Specify your error tables only and follow instructions given in the note.Once done bring down SAP app. and restart the export process using ur sapinst or distribution monitor.
Regards,
Vamshi.

Can I set a default Playback preference for multiple users on same PC?

I am setting up an editing suite for our University which has a "per machine" Creative Cloud licence. It is a PC installation. This machine will be used by a class of students who will log in with their own credentials. I need to set the preferences for Premiere (video output, workspace layout, default drives etc) so that it will be the same for all users logging in since we want a consistent setup for teaching purposes and dont want to have to help each student set up so that it shows correctly on the monitors. Is there a way of saving this setting as the default for every user? In particular, as we have dual monitors, we want to save the preferences - Playback to always appear on the second monitor. This is really important for us - I need an answer before building more suites.
(Adobe won't let me ask them directly, so I have to wait for someone to provide an anwser on the forums... not great customer support in my book)

Firstly...is this editing suite for the purpose of teaching editing or something else?
Next ...what is your experience with PPRo?
You can set up the machine(s) initially exactly how you want them in regards to hardware and screen layouts etc. Thats easy and can be called..'University of Waikato Default Edit Workspace' for example. That is only part of it though.
You can set up and share a common Key Board Short cut Preference File. Same as Export Presets.
There is no way you can "Default" all the USERS stuff for individual unique projects though without creating a massive potential for disaster and confusion.
Each will need to have access to many separate drive locations for their media (audio, graphics, footage) and the knowledge to create, access and locate it.
THey will each need a separate Location for their Projects as well as their media.
If they are editing students...they should be taught how to set up everything for themselves so they have an understanding of the fundamentals and basic s of NLEs

How do you change the default setting for RTF documents from TextEdit to MS Word

How do you change the default setting for RTF documents from TextEdit to MS Word, I download forms from the Canadian government and they use RTF as a standard, they are supposed to open as MS Word documents (Yes I have Office for MAC 2011) but when download the document it goes to TextEdit which messes up the form format. I can down load it right click and go "open with" MS Word but how can I get the default chnaged to save this step.

richr604 wrote:
Thanks I knew this, I like Safari as I want to keep everything MAC, but if I use Firefox the documents open in MS Word straight away, I was just curious if there was some setting I could change?
In Firefox > Preferences, click the Applications tab. If RTF is there, use the pulldown menu in the Action column to pick MS Word. If RTF is not there, there are instructions here for how to add file types.

Export to Word RTF - Page Server error when over 160 pages exported

We have XIR2 SP2
We have a Crystal report published into this Enterprise which, when all parameters are widened, runs to 190 pages.
The resultant report includes tables
We can export to PDF but the client requires it in Word RTF
We can export to Word RTF Editable - and all 190 pages are produced in the resulting file, but of course the tables are omitted and the result is messy.
So, we need to export to Word RTF where the format is neat and includes the tables.
However, when we try and export more than 160 pages to Word RTF, we receive the following error.
CrystalReportViewer
handleCrystalEvent failed
Unable to retrieve Object.
The Page Server you are trying to connect to is not accessible. Please contact your system administrator.
We have a duplicate environment with an identical configuration, standing by as a failover environment and which points to the same data.This produces the same error, so we don't think it's an installation corruption or failure.
The page server is set to a maximum of 2,000,000 rows, the cache server at 256000 maximum.

Hi Tony F,
Many thanks for coming back on this one. Both Enterprise servers are identical in BO config, Windows 2003 server, but different in hardware.
One has 4 proc and one has 2, one has twice the memory of the other, yet both fail at over 161 pages. Both have their boCMS db's on different servers, both derive the data from different servers.
IIS is the web server. The only common denominator is the actual installation software itself and the person who installed it (me).
On Friday, instead of running the reports in Enterprise/Preview or Infoview (both exhibit the problem) I switched from our default activeX to DHTML, and advanced DHTML. No improvement (Our report wouldn't work with Java, which we never use)
On the suggestion of the SAP/BO support girl, I then SCHEDULED the report for immediate running and chose WordRTF as the format. This works fine.
So on that evidence I suspect a software glitch that is specific to using Infoview to open the report rather than schedule it - the two processes must access the WordRTF translator in different ways.
I'm hoping there is a patch or hotfix that can solve it. Sadly, our users don't have the appetite for the few extra clicks to use the workaround so we're going to have to pursue it with BO unless the forum comes up with an answer - perhaps its something I didn't do properly on installation, or a CMC/CMS setting. We've got 2m row limit on the page server but the report's row count is nothing like that and, anyway, it works if scheduled.
I'm really grateful to you for taking the time to reply, I hope the above answers your question - if I had hair to pull out, I'd be doing just that!
Kind regards
Tony W

[AS][IDCS3] PDF Export Preferences Color Conversion setting

I want to set the field of Color Conversion (as equivalent to manual setting under Output>Color>Color Conversion) to "No Color Conversion" in Applescript but couldn't figure it out.
My skeleton Applescript is as follow:-
tell application "Adobe InDesign CS3"
 tell PDF export preferences
 -- I want to set No Color Conversion for Color Conversion here
 end tell
 tell document 1
 export format PDF type to filename without showing options
 end tell
end tell
I have search through Applescript ID CS3 dictionary but couldn't find the answer. Hope someone can advise. Thanks!

Use:
set effective PDF destination profile to use no profile
Shane Stanley <[email protected]>
AppleScript Pro Sessions <http://scriptingmatters.com/aspro>

Does anyone know how to hide the export option for excel 2007

Does anyone know how to hide the export option for excel 2007?
We are having an issue with negative numbers downloading as text field in excel 2007, works fine in excel 2003.
We are on version 11.1.1.7.0 of OBIEE.
Thanks for any response.

Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

Error in unicode export...

Hi,
We are doing an inplace conversion of an ERP2005SR2 system. We have just upgraded the system from 4.6C yesterday and are now performing an unicode conversion.
Unfortunately we have an error in the unicode export... See below:
From the SAPINST_DEV.LOG file:
ERROR      2007-08-25 17:08:03 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file G:\usr\sap\SAPinst\CPC\EXP/SAPSDIC.log
From the SAPSDIC.LOG file:
/sapmnt/BNP/exe/R3load: START OF LOG: 20070825202939
/sapmnt/BNP/exe/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/sapmnt/BNP/exe/R3load: version R7.00/V1.4
Compiled Aug 8 2007 00:22:00
/sapmnt/BNP/exe/R3load -datacodepage 4102 -e /usr/sap/SAPinst/CPC/EXP/SAPSDIC.cmd -l /usr/sap/SAPinst/CPC/EXP/SAPSDIC.log -inplace
DbSl Trace: CPFB755 occured. Refer to job log.
(DB) INFO: connected to DB
(EXP) INFO: check NameTab widths: Result=0.
(RC) WARNING: unexpected "ext:" entry at line 6 in file /usr/sap/SAPinst/CPC/EXP/SAPSDIC.cmd,
            entry will be ignored
(RSCP) WARN: UMGCOMCHAR read check, skip: no data found; probably old SPUMG.
(RSCP) INFO: "/usr/sap/SAPinst/CPC/EXP/SAPSDIC004.xml" created.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1100
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: active, by default
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "BNPSAP001                                                                                "
(GSI) INFO: vname    = "DB400                           "
(GSI) INFO: hostname = "SAP001                                                          "
(GSI) INFO: sysname = "OS400"
(GSI) INFO: nodename = "SAP001"
(GSI) INFO: release = "3"
(GSI) INFO: version = "5"
(GSI) INFO: machine = "006500039C6C"
(GSI) INFO: instno   = "0020141614"
(EXP) INFO: starting NameTab check. Allow 999999999 misses in DDNTT, 10000 misses in DDNTT_CONV_UC, 0 outdated alternate NameTab entries according to CRTIMESTMP.
(EXP) INFO: /SSF/DHEAD                        missing in DDNTT_CONV_UC
(EXP) INFO: /SSF/DTAB                         missing in DDNTT_CONV_UC
(EXP) INFO: /SSF/PTAB                         missing in DDNTT_CONV_UC
(EXP) INFO: TIBAN_ACTIVE                      missing in DDNTT_CONV_UC
(EXP) ERROR: entry for COPABBSEG                         in DDNTT is newer than in DDNTT_CONV_UC: 20070825073714 > 20070825073318
(EXP) ERROR: entry for COPABBSEG_GLX                     in DDNTT is newer than in DDNTT_CONV_UC: 20070825073756 > 20070825073318
(EXP) ERROR: entry for COPACRIT                          in DDNTT is newer than in DDNTT_CONV_UC: 20070825073801 > 20070825073318
(EXP) ERROR: entry for COPAOBJ                           in DDNTT is newer than in DDNTT_CONV_UC: 20070825073804 > 20070825073318
(EXP) ERROR: entry for EE72_COPAKEY                      in DDNTT is newer than in DDNTT_CONV_UC: 20070825073756 > 20070825072528
(EXP) ERROR: entry for JBDCHARDERI                       in DDNTT is newer than in DDNTT_CONV_UC: 20070825073804 > 20070825071134
(EXP) ERROR: entry for JBDCHARPAFO                       in DDNTT is newer than in DDNTT_CONV_UC: 20070825073805 > 20070825071134
(EXP) ERROR: entry for JBD_STR_FO_PA_CHAROBJ             in DDNTT is newer than in DDNTT_CONV_UC: 20070825073805 > 20070825071127
(EXP) ERROR: entry for JHF11_KOMP_STR                    in DDNTT is newer than in DDNTT_CONV_UC: 20070825073820 > 20070825071037
(EXP) ERROR: entry for JVKOMP                            in DDNTT is newer than in DDNTT_CONV_UC: 20070825073822 > 20070825070937
(EXP) ERROR: entry for KOMG                              in DDNTT is newer than in DDNTT_CONV_UC: 20070825073808 > 20070825070802
(EXP) ERROR: entry for KOMGF                             in DDNTT is newer than in DDNTT_CONV_UC: 20070825073823 > 20070825070802
(EXP) ERROR: entry for KOMGFNEW                          in DDNTT is newer than in DDNTT_CONV_UC: 20070825073836 > 20070825070802
(EXP) ERROR: entry for KOMGFOLD                          in DDNTT is newer than in DDNTT_CONV_UC: 20070825073838 > 20070825070802
(EXP) ERROR: entry for KOMP                              in DDNTT is newer than in DDNTT_CONV_UC: 20070825073814 > 20070825070755
(EXP) ERROR: entry for KOMPAKE                           in DDNTT is newer than in DDNTT_CONV_UC: 20070825073805 > 20070825070755
(EXP) ERROR: entry for OICIL                             in DDNTT is newer than in DDNTT_CONV_UC: 20070825073825 > 20070825070219
(EXP) ERROR: entry for OIRCPMITEM                        in DDNTT is newer than in DDNTT_CONV_UC: 20070825073826 > 20070825070148
(EXP) ERROR: entry for STR_KOMG                          in DDNTT is newer than in DDNTT_CONV_UC: 20070825073828 > 20070825063750
(EXP) ERROR: entry for SVVSC_COPA                        in DDNTT is newer than in DDNTT_CONV_UC: 20070825073757 > 20070825063738
(EXP) ERROR: entry for TRCON_CONTRACT_DATA               in DDNTT is newer than in DDNTT_CONV_UC: 20070825073846 > 20070825053905
(EXP) ERROR: entry for TRCON_CONTRACT_DATA_MM            in DDNTT is newer than in DDNTT_CONV_UC: 20070825073847 > 20070825053905
(EXP) ERROR: entry for TRCON_CONTRACT_DATA_SD            in DDNTT is newer than in DDNTT_CONV_UC: 20070825073848 > 20070825053905
(EXP) ERROR: entry for TRCON_IT_KOMP                     in DDNTT is newer than in DDNTT_CONV_UC: 20070825073830 > 20070825062450
(EXP) ERROR: entry for TRCON_OUTP_DBDATA                 in DDNTT is newer than in DDNTT_CONV_UC: 20070825073848 > 20070825053905
(EXP) ERROR: entry for WB2_EKOMP                         in DDNTT is newer than in DDNTT_CONV_UC: 20070825073831 > 20070825060540
(EXP) ERROR: entry for WCB_COND_DATA                     in DDNTT is newer than in DDNTT_CONV_UC: 20070825073848 > 20070825053905
(EXP) ERROR: entry for WCB_COND_DISP                     in DDNTT is newer than in DDNTT_CONV_UC: 20070825073839 > 20070825053905
(EXP) ERROR: entry for WCB_KEY_CHANGE                    in DDNTT is newer than in DDNTT_CONV_UC: 20070825073843 > 20070825053905
(EXP) ERROR: entry for WCB_KOMG                          in DDNTT is newer than in DDNTT_CONV_UC: 20070825073832 > 20070825053905
(EXP) ERROR: entry for WCB_KOMG_HELP                     in DDNTT is newer than in DDNTT_CONV_UC: 20070825073834 > 20070825060526
(EXP) ERROR: entry for WRF_POHF_KOMP_STY                 in DDNTT is newer than in DDNTT_CONV_UC: 20070825073844 > 20070825060357
(EXP) INFO: NameTab check finished. Result=2 #20070825203013
(EXP) INFO: check for inactive NameTab entries: Result=0.
(DB) INFO: disconnected from DB
/sapmnt/BNP/exe/R3load: job finished with 1 error(s)
/sapmnt/BNP/exe/R3load: END OF LOG: 20070825203013
I have an OSS message on "very-high" on this error, but they are not helping very much! SAP has proposed note 738858 were we set two environment variables. We have done this and that did not help.
We have upgraded and unicode converted two test systems and one development system in the last 2 months without this error.
Do you have any ideas?
Best regards
Henrik Hviid

Hello!!:
I'm doing a CU&UC (as say the CU&UC Guide), and now i'm in the phase of upgrade from 46C MDMP to ECC6.0 no unicode (later in other phase i've to change to unicode). I've generated all the SCAN's, and launch the SAPup (Upgrade Process). The phase UPGRADE/SHADOW: START OF PHASE RUN_RADCUCNT_ALL of the SAPup has created the job RADCUCNTUPG, and has been running during 20 hours. It's possible to do this phase quickly??.
Otherwise, in the chapter 3.2.2 Phase RUN_RAD_CUCNT_NEW is going to regenerated the DDIC Objects. So in the Additional Preparation Steps in SAP NW7.0 nonUC (chapter 4.1. of the guide) will be neccesary to launch again the program RADCUCNT with the variant UNICODE-02??? or we've only to do the seven steps that appears in the Guide???.
I've seen the Note 932779, 837173, about this, but i don't see the solution. In the page 7 and 8 of the Note OSS 932779, say that:
- during CU&UC nametab is touched twice, once for upgrade and once for unicode conversion (in phase RADCUCNT_ALL and in phase RADCUCNT_NEW).
- later appears that during unicode conversion preparation (SPUM4/SPUMG) RADCUCNT runs again twice.
So in the chapter 4.1 about additional preparation steps in NW7.0 non UC there is not this step (only appears7 steps). It's really neccesary in the CU&UC in this moment?
Thanks!.
Alfredo.

Setting preferences for hyperlink display properties

I want all new hyperlinks created by InDesign and InCopy users at my site to have a certain set of properties. I want them to be sort of orange, with a thin dotted line around them. This is not so that they can be exported to pdf with buttons, but just so that we can preserve links in text for a print paper which is later going to be exported to the web, and I have a script that expands them into html at that point.
But I can't seem to find any preference that I can set that will allow me to set default display options for all hyperlinks newly created by users. Hyperlinks used to show up automatically as black rectangles for us, and now they show up invisible. So because I have personally witnessed some change in the default behavior, I feel sure there must be a preference I can set somewhere. But it's possible that was just the switchover from standard behavior in CS4 to standard behavior in CS5.
Any ideas?

Sorry but no. There are no viewing preferences for the iTunes Store.

Applescript: Packaging and exporting PDFs for multiple files -- need some tweaks

I found and tweaked a droplet script that isn't quite working right. I am hoping for some help with getting it to work the way I want. I tried and failed to learn to do this myself. Your help is greatly appreciated!
Here's an example: I drag two files called "filename.indd" and "filename2.indd" onto the droplet. The script I have right now will output the packages and PDFs into the following folder structure:
export folder
 filename folder
 filename.pdf
 filename folder
 filename.indd
 [Package contents]
 filename2 folder
 filename2.pdf
 filename2 folder
 filename2.indd
 [Package contents]
Here's the folder structure I need (using a dialog box or script that intelligently knows that the directory to save in is the same as the files I dragged on to the droplet would be amazing):
dialog box to choose new directory set to baseFolder
or
baseFolder <---- set to the current directory of the files I dragged onto the droplet
 filename folder
 filename.indd
 [Package contents]
 PDF folder <--------new folder "PDF" created
 filename.pdf
 filename2 folder
 filename2.indd
 [Package contents]
 PDF folder <--------new folder "PDF" created
 filename2.pdf
Here's a script I found and modified:
property baseFolder : (path to desktop as text) & "exports:"
on open mgItems
 repeat with mgThisItem in mgItems
 tell application id "com.adobe.InDesign"
 try
open mgThisItem
 set mgDocName to name of active document
 set text item delimiters of AppleScript to ".indd"
 set mgShortName to text item 1 of mgDocName
 set targetFolderPath to my createFolder(mgShortName)
 set text item delimiters of AppleScript to ""
 set mgPackageFilePath to targetFolderPath & mgShortName as string
 set mgProofFilePath to mgPackageFilePath & ".pdf" as string
 set properties of PDF export preferences to properties of PDF export preset "[Smallest File Size]"
 tell the active document to export format PDF type to mgProofFilePath without showing options
 tell the active document to package to mgPackageFilePath with copying fonts, ignore preflight errors, copying profiles, updating graphics, including hidden layers, copying linked graphics and creating report
close active document saving no
 on error e
display dialog e
 end try
 end tell
 end repeat
 display dialog "PDFs created and InDesign file packaged"
end open
on createFolder(nameString)
 set macFolderPath to baseFolder & nameString
 do shell script "mkdir -p " & quoted form of POSIX path of macFolderPath
 return macFolderPath & ":"
end createFolder
Thanks very much!

...anyone? :\

Feature Request: Export catalog for 2nd editor/machine

Since there isn't a shared network environment for LR, to involve multiple editors or multiple locations for the same editor on large projects, I often need to export a subset of a catalog so someone else can work on it, or I can work on it off my laptop somewhere other than the studio, using only the proxy 1:1 previews to make my decisions from and then re-assimilate those edit changes to the master catalog of that job, usually back on my primary workstation. This process also allows me to start processing out parts of the job while other parts are being edited on other machines, or letting my primary workstation process while I use a 2nd workstation to continue editing at speed on.
I can make this happen, but it's all on me to remember which portions of the catalog have been exported, where their destination was/is, remember not to make any changes to that portion of the library while the subsection has been exported, and an over-lengthy and complicated merging of exported and internal catalogs.
It would be incredibly useful if LR could show the status (checked out for primary edit, checked out for client approval, etc.) of any exported catalog by mousing over that visibly different section and build in a preference for those varied conditions to potentially limit any changes to that subset of images while the export is still 'checked-out.' A true merge would be nice to allow possible overlaps of work on the same images, but a managed lock-out would be sufficient to start with.
As it is, the re-assimilation process for me involves removing images from the master catalog leaving the raw files in place, and re-importing the exported catalog which also necessitates the needless redundancy of bringing the 1:1 previews back in as well. At the scale I'm doing this it's overly time consuming, compared to the speed of just bringing in the library itself. The process also puts me in the place of deleting images from a catalog while they're essentially still in use, which is scary from a file management standpoint, usually with me having 4 and 5 copies of that library lingering around until all the manual merging actions are finished.

That's a feature I've asked for myself Brad, in the absense of true network use. As it's not likely to make the final release, and we wouldn't want the request to get lost in beta land, might I suggest adding it as a suggestion on the Feature Request forum http://feedback.photoshop.com/photoshop_family where it can easily be tracked? If you post the link to your request here, others can also vote on your request.

InDesign CS4 crashes during "Export Book for Digital Editions"

InDesign CS4 crashes each time I select "Export Book for Digital Editions." I tried deleting my preferences and then creating books that contain only two very simple INDD documents, but I still get this error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files\Adobe\Adobe InDesign CS4\InDesign.exe
R6025
- pure virtual function call
I can export books as EPUB files without problems on my personal laptop, which has InDesign CS5. But we're using CS4 at the office. Any ideas?
I'm running InDesign CS4 version 6.0.6 on Windows XP Professional, Version 2002, Service Pack 3, HP Compaq desktop, Intel Core 2 Duo CPU.

google r6025 runtime error and you'll see a lot of advice for tracking down and correcting the problem.

Estimating Unicode Export / Import time

hithere,
Is there a good methog of estimating the unicode export/import runtime . for a 9cpu system with 500 GB of database size , what is the thumbrule of calculating the runtime.
welcome your ideas and suggestion..
Thanks

Hi,
You can also use [SAP Downtime Assessment Service|https://websmp105.sap-ag.de/upgradeservices] from SAP.
Regards,
Somar

Unicode Export Preference for RTF

Similar Messages

Maybe you are looking for