Uninstall Oracle Culster (RAC) & Oracle Database with Raw File System (LVM)

Hello,
I have configured "Oracle RAC" with "Database" on Hp Unix 11.23 Platform. The shared storage is based on "raw" file system,which has mounted through "SAN" Storage. We have used total 18 LV (logical volumes) for oracle & clusterware.
By mistaken, I have configured wrong "Public, Private IP Address & Virtual IP Addresses" during RAC installation,thus my oracle "crs" is not working perfectly. So, is it possible to modify the "public,private & Virtual" IP Addresses? If Yes, provide me the step by step modification link.
Moreover, I would like to know certain steps to uninstall entire "Oracle Clusterware & Database." Kindly do the needful the "uninstallation" steps & is it necessary to remove & recreate LVM partitions, on which "oracle crs & database" has installed?
Advanced Thanks,
Nishith Vyas

Hi,
You haven't told anything about version...
By mistaken, I have configured wrong "Public, Private IP Address & Virtual IP Addresses" during RAC installation,thus my oracle "crs" is not working perfectly. So, is it possible to modify the "public,private & Virtual" IP Addresses? If Yes, provide me the step by step modification link.BTW, this thread has information that can drive You to this change:
Re: Is it possible?
Moreover, I would like to know certain steps to uninstall entire "Oracle Clusterware & Database." Kindly do the needful the "uninstallation" steps &Again... No versions, but You this thread can drive You to this
How to cleanup / remove RAC installation (CRS,RDBMS,ASM)
is it necessary to remove & recreate LVM partitions, on which "oracle crs & database" has installed?I don't think so. If all steps on uninstalling procedure don't work, You'll can try "zero" the information on the raw device using dd.
Hope it helps,
Cerreia

Similar Messages

Updating Oracle 8.1.6 database with XML file

Hi All,
I need your help for the following scenario.
I'll transfer data from 13 tables of SQL Server 6.5, into a XML
file. That file might contain around 70 Lakhs records(rows).
This 70 lakh records will be shared by 11 tables in Oracle 8.1.6
database. So each table would approximately have around 6.5 lakh
record each. How to transfer this XML file data into those 11
tables? Is any tool available to do so?
And before inserting that 6.5 lakh rows into a table, i need to
clear up that table (means delete all the existing data). In
this case, if the XML data tranfser fails, i need to rollback
the deleted old data. I want to know about rolling back
volumness deleted rows.
Need your solutions on this.
Thanx in advance.
Rgds
Elav.

Hi All,
I need your help for the following scenario.
I'll transfer data from 13 tables of SQL Server 6.5, into a XML
file. That file might contain around 70 Lakhs records(rows).
This 70 lakh records will be shared by 11 tables in Oracle 8.1.6
database. So each table would approximately have around 6.5 lakh
record each. How to transfer this XML file data into those 11
tables? Is any tool available to do so? SQL*Loader or XSU. Question: Why you are trying to use XML file
instead of using plain data file?
>
And before inserting that 6.5 lakh rows into a table, i need to
clear up that table (means delete all the existing data). In
this case, if the XML data tranfser fails, i need to rollback
the deleted old data. I want to know about rolling back
volumness deleted rows.
Using SQL*Loader you can specify to clean up the old data before
insertion, but not sure about the rolling back to the deleted
rows after insertion failure.
You can write a small application based on XSU to finish this
task. But note about the commit size. If you data volumn is
large, you need to set the commit size > data. Also you probably
need to divide the data into small pieces so as to avoid running
out of redo log.
Need your solutions on this.
Thanx in advance.
Rgds
Elav.

Installing Oracle databse in RAW file system

Hi All
Can you pls provide links or oracle documents to install Oracle database in RAW file systems...
We have searched but didn't get any exact procedure to carry on ...
Regards
Hariharan.Thyagarajan

Hi
We have gone through some link and your's too , we can create logical disk in our disk drives, but we are not good in mapping the raw devices in the windows environment.
say we have created raw devices partition for all tablesapces, spfile, redolog files etc in our disk drives, we are not good in maaping that in the DBCA OUI ?
Can you pls help us on this ?
Regards
Hari

CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
now pls tell how to start listner and how to chage runtime preferences.
though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
thank you, you may be thinking such a long question.....

sir
By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
all the clients are using same internet explorer as browser.
no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
thank you for your patience for reading the question

Upgrade Oracle 10g RAC - Oracle 11g RAC on Linux Environment

We are planning to Upgrade our databases to Oracle 10g RAC - Oracle 11g RAC which is Linux Environment. Kindly suggest me the best option for migration. Our production database size is 80GB.
- Frest installation of oracle 11g using export/iimport dumps
- Migration
- Upgrade process
Any information regarding this will be appreciated.

Pl identify exact versions of "10g" and "11g", along with the exact OS versions.
Pl see the upgrade doc - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
HTH
Srini

Oracle reports problem in distribution with xml file

Hi ,
I am having problem while I am trying to distribute the file with specifing the destination details in the xml. If I am giving the destination details in url then it is working.
Ex.
This is Working
http://bryxh91:8889/reports/rwservlet?report=devlopersuit/reports/test.jsp&userid=anju/[email protected]&desformat=pdf&destype=file&desname=devlopersuit/reports/output_file.pdf
Not working :
http://bryxh91:8889/reports/rwservlet?report=devlopersuit/reports/test.jsp&userid=anju/[email protected]&DISTRIBUTE=YES&destination=devlopersuit/reports/dis_test.xml
xml file
<destinations>
<file id="test" name="output_file.pdf" format="pdf">
<include scr="mainSection"/>
</file>
</destinations>
Error : REP-34304: Distribution failed to complete; review the distribution lists
Its been week I tried many things , but not working.
Right now I am trying to distribute to single file but my goal is to burst and distribute on basis of account number.
This is the first stage of the project.
Thanks a lot for the help
Anju

Hello
see answer in Oracle reports problem in distribution with xml file
Regards

ORACLE error from auxiliary database: ORA-01152: file 2 was not restored fr

Hello,
i'm trying to clone a database. It is in archive log mode.
I took a full back using below command
run {
backup
     tag 'DAILY_WHOLE'
     format 'FULL_backup_%s_%p_%c.bkp'     database
     plus archivelog
     tag 'DAILY_WHOLE'
     delete all input;
backup
     current controlfile
     format 'FULL_backup_%s_%p_%c.bkp'     tag 'WHOLE'
     spfile
     format 'FULL_backup_%s_%p_%c.bkp'     tag 'WHOLE';
}then i issue a duplicate database command
RUN
DUPLICATE DATABASE TO TEST_DB
          NOFILENAMECHECK
           NOREDO
          BACKUP LOCATION '/disk10/flash_recovery_area/PROD';
}at the very end I got this error.
contents of Memory Script:
   Alter clone database open resetlogs;
executing Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/15/2013 11:59:21
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2: 'sysaux.dbf'Can anyone help me? I would appreciate it. thanks

NOREDO would be used when you have a Consistent Backup (i.e. backup taken when the database is MOUNTed but not OPEN) and so, no archivelogs need to be applied. (This would also be the case for a NOARCHIVELOG database).
See the notes on NOREDO in the DUPLICATE command documentation in the Backup and Recovery Reference.
http://docs.oracle.com/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Hemant K Chitale

Accessing and Managing RAC 10g database with 9i OEM

can i Access and Manage RAC 10g database with 9i OEM? If yes How?

9i EM can 'see' a 10g database and perform some basic functions (rsp. all what is known to 9i). But it cannot manage any 10g functionality , because it doesn't know it. So such a constellation doesn't make really sense. On the other hand 10g EM can manage 8i,9i and 10g databases.
Werner

Working with RAW files in PSE9: Doable or better to use PSE12?

I have PSE 9 and will soon get a camera with RAW capability. I notice that Adobe no longer supports PSE 9. Am I in for trouble if I don't upgrade to PSE 12 since I don't know how to work with RAW files? It sounds as if I will need something to convert RAW files? Where do I get it? Is it a big deal for a beginner with no software skills?

You can download a free DNG Converter from Adobe and then convert your RAWs to DNGs which can be used in PSE9.
You don't need PSE12, but if you want to purchase PSE 12, you get the most current features in the Raw processor (which in my opinion is a huge improvement over what is available in PSE9), and you don't need the extra step of converting to DNG.

Working with RAW files in iPhoto 5.0.4 and Elements 4.0.1

I take photos in RAW mode and download them to iPhoto. When I try to edit the photo in iPhoto, the picture is a tiny little file that is impossible to enlarge with any sort of clarity. Also, the word "RAW" does not appear anywhere on the iPhoto window like I read it is supposed to.
When I drag the file to Photoshop Elements, I get an editing window that has none of the tools usually associated with JPEG files. I get a separate window in which I can darken or lighten the image, that's it.
Clearly, I'm doing something wrong. No one in their right mind would ever use RAW if this is how it works.
Any ideas?

Hi Jack!
If you're new working with RAW files, your right, it just doesn't make sense. RAW <imho> is a bit overrated. One thing you will need to keep in mind when shooting in RAW, is you will still need to take a well exposed image. What RAW files will allow are CHANGES in all areas of the image v. JPEG which may allow you to ADJUST a few settings in the image. My only suggestion would be to kepp playing around with PSE until you get the hang of it, it is an excellent image editing software. But realize, a well exposed JPEG and RAW file are hard to tell apart...
Personally, I do not directly download RAW files through iPhoto but will create a folder and download to here, and simply drage folder to iPhoto to import (which are then 'converted' into JPEG files). This way I have the original RAW images safely located outside of iPhoto as well as in iPhoto. You should set Elements as your choice of application to edit files inside iPhoto.
Good luck, Rick
Good link: http://www.elementsvillage.com/forums/ and just for fun: http://www.photoshopcosmetics.com/index.php

Working with Raw files in Aperture

I bought a DSL are camera recently and have been shooting RAW
Naturally my library is filling up with raw files
My question is - when I want to export a very high quality image how do I get it out of Aperture and keep it as a large ihigh-quality image in raw?
The export options that I have - from dragging to the desktop to sharing as- all end up leaving me with a JPEG image which might only be two or 3 MB. The raw file can often be 10 or 15 MB
So what is the best way to output the full image?

I have a RAW file (22 mbs), I can see from your helpful guidance that I can go into Aperture/Preferences/Export and set the export format to (for example) Tiff 16 bit. When I do that the exported Tiff file is 53 mbs, sounds like I have a got a pretty full version there with all the information store in it so no compaints.
I have another option, export as jpeg in 'original size'. When I set that and then 'Share as email', the resulting image is 2.2 mbs. Do you think a 2.2mb jpeg can be the full high quality image ?
My knowledge of this area, isas you can see, a bit limited. I do understand that if I was sending the image to a printer to get a high quality image, I would send him the 53 mb Tiff file, but is the 2.2 mb jpeg a lower resolution cut doewn version of the original ?
Regards
Danny

Issues with RAW files from my 7D

I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
Any words of advice, other than just buy Aperture 3??

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

How can i run Lightroom 3.6 with RAW files from Canon 650D?

How can i run Lightroom 3.6 with RAW files from Canon 650D?

Download the newest DNG converter from Adobe, convert your RAW photos to DNG, and then Import into Lightroom.

Help with Raw Files

I'm using an Imac with 2.1 Ghz PowerPC G5 processor, running OS X 10.5.8 and Photoshop CS2. I just bought a Nikon D300s and would like to work with raw files. Adobe tells me I need CS5 which means I would need to buy an new computer. Is there anyway around this?

You'll need to convert your raw files to DNG with Adobe's free converter: http://www.adobe.com/products/dng/

Browsing directory with RAW files

Is there any way to browse directory with RAW files? I can use dcraw, ufraw or rawstudio to work on single file, but how to find the file I want in directory with more than 100 RAWs?

I use rawtherapee for most of my photo editing needs. (Not that I have an especially high skill level.) It provides, among other things, a browser interface for moving through your files. It looks like AUR still has version 2.3 -- I suggest the beta instead, which is available for x86_64 or x86 right from www.rawtherapee.com -- IME it's been very stable, and it contains many, many bugfixes and interface/workflow improvements over the current "release" version.
I haven't broadly sampled a bunch of different apps, but I've been very happy with it.
No installation is required, just extract to the directory of your choice and execute "rt" to run it.
To get it working on Arch, I did have to do this step first, as noted in the comments in AUR:
As root run "gtk-update-icon-cache -f /usr/share/icons/THEME" for the Icon-THEME you are using and rawtherapee starts nicely.
If you try running it without first doing that, and it fails to start up, check to see whether you need to kill the "rt" process before trying again.
I've been using it since 2.3 was first released (IIRC) and have used it under Ubuntu and openSUSE successfully, in addition to Arch, both x86 and x86_64.
Last edited by arch_nemesis (2009-01-13 20:30:34)

Uninstall Oracle Culster (RAC) & Oracle Database with Raw File System (LVM)

Similar Messages

Maybe you are looking for