Unique ID for ALL Machines in the World

Hi All,
I have made a client-server application.
The server is the servlet implementation and the client in Swing application.
When client gets installed, it has to send the unique ID to the server for registration. I call it Activation Process.
My problem is how to get the information that will be unique across all the computers on the earth.
Can anyone tell if i can use any system information or something that java can do itself?
Thanks in advance.
Hoping for a favorable response.
Kind Regards
Chetan Chandarana

Hi,
Well I agreee for using MAC address. Thats the different issue of finding them using Native methods.
But what about the machines those are at home and does not have the Network Card ??
Thanks for ur reply.
Kind Regards
Chetan Chandarana

Similar Messages

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over? Also how do you request films/tv series to the UK itunes?

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over?
Also how do you request films/tv series to the UK itunes? There's tv series I'd like but they're incomplete like The Batman & Xena Warrior Princess. And films theta aren't available for download but you can purchase in a store like HMV? Apple isn't doing itself any favours by secluding countries by their store. They'd make billions if you could just select the iTunes Store you want to search & purchase from just by signing in! If anything what they're doing is putting themselves into a corner, other companies like Samsung & HTC are already on too of them for innovation & ease of use. The people they're attracting are predominantly existing Apple users not new customers. What do you guys think?

It's not Apple's choice, they can only sell a particular item where the content provider/rights-holder has granted them a license to sell them. Content is licensed by the rights-holders to Apple on a country-by-country basis, each country therefore has to have its own store, and you have to be in a country to use its store - they want control over where their content is available.
You can try requesting that an item be added to the UK store via this page, but unless the rights-holder agrees to then Apple won't be able to sell it here : http://www.apple.com/feedback/itunes.html

Please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

arai-c wrote:
I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
arai-c wrote:
the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
I don't understand; two days ago you wrote that you have it, now you don't...?
If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

Can I set an mx control property globaly for all instances of the control.

Is there a way of setting the value of a variable on a control for all instances of the control in the application?
For example, I have several instances of an mx:Label and I want to change the enabled property for all instances at once rather than refer to each one individually by id.

One way is to subclass Button and change its enabled getter to watch some static property. You don’t really want to change Button itself because Buttons exist in lots of places like ScrollBars.

I need to configure a new hard disk as backup disk for time machine. The set up program is running and it says it will take 9 days to backup about 56 GB. Is it normal ?

I need to configure a new hard disk as backup disk for time machine.
The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
Is it normal ?

Roberto 17 wrote:
I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
The new HD is a WD My Passport Edge 500 GB capacity
5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup."

For all entries changes the order of the itab

Hi Experts
             In the following query i have used two internal tables namely it_first and it_zlist.
            The material inwhich the it_zlist is different sorting order
      After executing this query, the order of the material inwhich the it_first is different from the it_zlist.
             What could be the reason, pls explain me on this.
select matnr test zsno ztnam from zmaster1
            into corresponding fields of table it_first
                  for all entries in it_zlist
                  where matnr = it_zlist-matnr.
Thanks in advance.
Regards
Rajaram

for all entries u should specified all primary key.
sort by u condition.
Effect
If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
The internal table itab must have a structured line type and the component comp must be compatible with the column col.
The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
Notes
In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
If the additions PACKAGE SIZE or UP TO n ROWS are specified together with FOR ALL ENTRIES, they are not passed to the database system but are applied instead to the resulting set once all selected rows on the application server have been imported.
With duplicated rows in the resulting set, the addition FOR ALL ENTRIES has the same effect as if addition DISTINCT were specified in the definition of the selection quantity. Unlike DISTINCT, the rows are not deleted from the database system but are deleted on the application server from the resulting set.
Addition FOR ALL ENTRIES is only possible for WHERE conditions of the SELECT statement.
Example
Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.

Please bring to downgrade to iOS 6.1.3! iOS 7 seems like the macintosh ago ... the beginning of the end! Sorry, but then provides for all iPhone lovers, the classic design and unlimited use without fault love the previous version available. It's super tir

Please bring to downgrade to iOS 6.1.3!
iOS 7 seems like the macintosh ago ... the beginning of the end!
Sorry, but then provides for all iPhone lovers, the classic design and unlimited use without fault love the previous version available.
It's super tiring to work with iOS 7!

Submit your feedback to Apple here:
http://www.apple.com/feedback

Creating an shortcut for all users on the desktop

I want to create a shortcut for all users on the desktop that will appear for all users that login to the computer. How is this done in Windows 7? In Widows XP this was done at the "All Users" profile, but I cannot find such a profile in Windows 7.

the users have windows vista , 7 or 8 have a chortcut i created and the users have windows xp isn't created on them desktop
Do you have a question? If so then your best bet is to create a new post (this one is 5 years old and marked as "answered"!) and spell it out there.

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

Patch compliance report for all machines in collection

Good day to all,
We are trying to create a report in SCCM 2012 that will show us all missing updates on all computers in collection. But we would like to display in this report only patches which are really targeted to the machines in collection. Let me explain.
We have multiple deployment groups for patching (OSD, Servers, Client, Test waves...) and current issue we have with all build in reports is that you have to either select one of these deployments and then select a collections - but this will give you only
status for current group of patches, for another one you have to select different one. And if there is a report where you have to select only collection the it will show all updates which are in deployment (this is not nice as for OSD we are putting some extra
patches to the image and then these patches are shown as missing on all machines - but they will stay that way as we are not deploying them...yet). The ideal report for us will be to select the collection and then show all missing patches that are targeted
to that collection. This was accomplished by this query:
SELECT
vRS.NetBios_Name0 AS 'Hostname',
Count(DISTINCT vUI.ArticleID) AS 'Missing Patches'
FROM v_UpdateComplianceStatus vUCS
INNER JOIN v_CIRelation vCIR ON vUCS.CI_ID = vCIR.ToCIID
LEFT JOIN v_AuthListInfo vALI ON vALI.CI_ID = vCIR.FromCIID
INNER JOIN v_UpdateInfo vUI ON vUCS.CI_ID = vUI.CI_ID
LEFT JOIN v_R_System vRS ON vUCS.ResourceID = vRS.ResourceID
WHERE vUCS.ResourceID IN (SELECT vFCM.ResourceID FROM v_FullCollectionMembership vFCM WHERE vFCM.CollectionID = 'CAS00296')
AND vUCS.Status = '2'
AND vALI.Title LIKE 'SWU Workstations ENG%'
GROUP BY vRS.NetBios_Name0
ORDER BY 2
However, if we would like to add more columns, like Reboot Pending, Failed, Installed, Not Needed... then the report will start to show incorrect data, e.g. for machine which is fully patched and according to "Programs and Features - Show installed
updates" have 235 patches installed it will show only 198 patches installed and 10 missing.
It have something to do with JOINs between tables but we are at the end of ideas how to proceed further (we already checked the official documentation for SQL tables in new SCCM).
Have any of you created a report like this? I tried to Bing/Google for hours but most of the reports are for SCCM 2007 and showing incorrect data.

Almost all SU reports created for CM07, still apply to CM12.
http://www.enhansoft.com/

Move the Cache files for all user in the domain, which work with the PC

Is there a possibility to chance the Cache file for all User.
If i logon with a new user the Cache is written automatically in Proflie of the user.
can configure to Java in such a way that with announce a user the Cache file get automatically moved to c:\temp.
Thanks for your help

oh, too bad, it is part of the requirement-we need to do it automatically through web.
Any easier method to change the client machine deployment.properties through web?
Need to deploy the application to thousands PC and the PC configuration may be different one by one.
oldguy

Unique ID for ALL Machines in the World

Similar Messages

Maybe you are looking for