Regarding campus management

Hi experts
   please explain me what is HE &R AND what is campus management
explain me the  business flow in  HE &R and campus management & modules
thanks in Advance
Avi

Hi,
HE& R refers to Higher education and Research.The same module was called Campus Management earlier.  The other name for the same is Student lifecycle Management ( SLcM).
The following business processes of a student are involved in this module
-- Admission
-- Registration
-- Module and event booking
-- Event planning ( resource planning )
-- Equivalence determination
-- Student Accounting
-- Assessments
-- Examination
-- Grading
-- Audits
-- Progression
-- graduation
Regards,
Sravan

Similar Messages

  • Regarding configuration of campus management

    Dear All
    Can anybody please guide me to configure campus management in ecc6
    thanks

    Hi,
    The post by Michael Fan in the same page titled 'Student Lifecycle Management Basic Configuration Guide' should help.It is the 3rd post on Page 1.
    Ramesh

  • Problem With Device Management in Campus Manager

    hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
    then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
    why does it hapened ?   
    thank you .

    Hi Marian,
    Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
    Content Activation Log
    Log for Setup ID 20100819135323
    20100819 135323[ERROR ]: Current Status: ERROR
    20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
    20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
    20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
    20100819 135323[ERROR ]: Prerequisites check failed
    20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
    I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
    Regards,
    Rue.

  • AniServer Campus Manager problem

    Hi I recently ran a Device patch update and ever since I have had major problems with Campus Manager.
    I figured it was Aniserver related So i have done the following so far:
    1- I reinitialised the ANI Database
    2 - I replaced the aniserv.properties with the .orig file.
    Still the problems exist even if i managed to get the Aniserver started campus manager data collection would have problems and intermittent error messages when trying to access Campus Manager admin pages.
    3 - I decided to upgrade to LMS3.2 SP1
         It seemed to be ok with data collection but then when I came in to work today it hadnt run any scheduled aquistions when i went tinto the admin pages I had the error messages again unable to get properties from server.
    4 I decided to try a complete restore of the database to a date before the initial device package update.
    But I still have problems with the aniserver Failed to run.
    Please Help!!
    Kind regards Dean
    Here is the Ani log
    2011/06/23 13:11:10 main ani ERROR ServiceModule: Failed to instantiate com.cisco.nm.ani.server.dfmpoller.NoServiceModule
    2011/06/23 13:11:10 main ani MESSAGE DBConnection: Created new Database connection [hashCode = 6164599]
    2011/06/23 13:11:12 main ani MESSAGE PartialSMFCommit: Partial Commit is enabled for DataCollection
    2011/06/23 13:11:16 main ani ERROR POStore: Exception caught: com.cisco.nm.ani.server.frontend.AniStaticConfigException: AniStaticConfigException: Failed (sql) to verify/construct schema for PO com.cisco.nm.ani.server.topo.PagpPortChannel because: com.sybase.jdbc2.jdbc.SybSQLException: SQL Anywhere Error -116: Table must be empty
    2011/06/23 13:11:16 main ani ERROR AniLoadConfiguration: AniStaticConfigException: Failed to construct or verify database

    Seems to be working fine now I used the info in the following link to reinitialise the ani.db  https://supportforums.cisco.com/thread/2083513
    Using this alone did not fix it opt/CSCOpx/bin/perl /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI
    But doing this as well seemed to sort it:
    First, set the CiscoWorks Daemon Manager service to Manual, and reboot the server.  When the server reboots, delete NMSROOT\databases\ani\ani.log if it exists.  Then run:
    NMSROOT\objects\db\win32\dbsrv9 -f NMSROOT\databases\ani\ani.db
    After that, set the Daemon Manager service back to Automatic, and reboot again
    Regards Dean

  • Campus manager user tracking problem

    Hi We are using LMS 3.0.1 and the campus manager verson is 5.0.2. We have two subnet which are used for the management ip of switch kept in two different geographical areas. I have made the entry of all devices kept in both subnets and all the devices are know device in DCR, RME and DFM. also after data collection the devices are shown in campus manager database. But I am not able to learn the end host details of the hosts connected to one of our segment.
    even if the perticular subnet is not appearing in "campus user tracking" as well as the devices belongs to the subnet. but I am getting all end host details from the second subnet.
    please help.

    Hi clarke,
    i have updated the cm to the latest but still it did not learn. Later i added the 10.188.7.x ip addresses manually in the discovery settings instead of " *.*.*.* " - ip range. Now i am able to see these devices in topology view > layer 2 veiw as connected devices & not seen in unconnected..
    Now i need to see the hostname, ip address etc details of these segments in UT acquisition window.... Secondly in topology view, the core switch is showing in "?" question mark symbol. This device is WS-C6509-E (sup-bootdisk:s72033-ipbase-mz.122-33.SXH3a.bin). I tried to delete this device from common services and added it again, there i selected "ws-c6509", i did not see the " ws-c6509-E".
    in Cisco site, the serial number of the device is showing as the device "VS-C6509E-S720-10G"
    Can u pls help me on this..
    regards
    rajesh

  • Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2

    Hi Friends,
    While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
    Thnx

    The name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
    Have you tried this
    http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
    regards
    Nasir

  • Campus Manager User Tracking Report - dot1xEnabled = False

    The Campus Manager User Tracking Report has the dot1xEnabled field that is always false.
    It was my understanding that the switch will send SNMP Trap Notifications to Cisco Works regarding the status of 802.1x authentication per port.
    We have configured per port:
    snmp trap mac-notification added
    snmp trap mac-notification removed
    and globally
    snmp-server host x.x.x.x  abababa udp-port 1431 MAC-Notification
    With no success, so we opened a TAC case, 614376387 and we were told by TAC and the Development Engineers that this "feature" does not work in LMS 3.2 and Campus Manager 5.2.1 and that this feature will be available in the next new release.
    I thought I had read on this forum that some folks have this 'feature' working, where this field shows the current status of 802.1x per access port.
    Has anyone been able to get this 'feature' to work?  And if so, what versions are you running and what were the 'tricks' to get it working?
    Much appreciated.

    The MAC address notification traps only alert Campus to the fact that a MAC address has been learned or removed from a given port.  That starts the dynamic UT process.  With no other information, you will potentially see a new record appear in UT shortly after receiving the trap.  However, that record will not have IP or username data associated with it.
    To get the IP data, Campus will poll the CISCO-DHCP-SNOOPING-MIB to pull IP data.  To get username data, Campus will poll the IEEE8021-PAE-MIB of the switch to get dot1x information.  So, your switch must be configured for dot1x, and it must support this MIB (in particular, the objects dot1xAuthSessionTime, dot1xAuthSessionUserName, and dot1xPaePortCapabilities).
    Without dot1x, hope is not lost.  If the end host is running Windows and the UTLite tool, then when the user logs in, UTLite should start from their logon script, and send a UDP update to Campus with the username and IP of the host.

  • Norma flow of Campus Management

    Hi CM Masters,
    I am new in Campus Management.
    Please tell me the normal flow of CM.
    I have some understanding..please correct me..
    1-Creation of Org Unit
    2-Attach Program of Study with org unit.
    3-Attach Modules with Program of study.
    4 Create Student
    5 Admission of student.
    administration of Student.
    7 Module Booking.
    8 Assesment.
    9 Progression.
    10.Re-registration/De-Registration
    11-Degree Audit.
    12 Alumni.
    Please tell me if any steps I am missing. And if you people have any documentation where I can found that what process is necessary before going from one steps to another it would help me.
    Thanks a lot

    Hi Ankita,
    For assesment process , module booking plays a very important role
    When Sessions Of Offering are assigned to the module , grading can be done .
    <b>Event Planning and booking :</b>
    Event Planning is more useful when you have two classes (A ,B )
    Eg:
    Decision Making(DM)  is the Module and two categories of section having the same module , resouces etc .
    Here comes the Event Planning : Where u can define the timings for the classes , the resource , location etc .
    Event Planning is done for Module DM where the template differs as DM_A ,DM_B  .
    Then you can book the students for that particular event DM_A ,DM_B .
    So easily you can differentiate the student belonging to the class DM_A or DM_B provided its already known that the partcular module is offered in that particular Sessions Of Offering .
    Regards,
    Gajalakshmi .

  • Enquiry of SAP Campus Management System

    Dear all
    Would like to have first enquiry about SAP Campus Management System, is it suitable for use by Learning Centres (for example some tutorial learning centre or child learning centre), what's the scale of the product and most importantly, initial investment? Thanks
    (For the first look I think only suitable to University type Campus?)
    Donald

    The SAP Student Lifecycle Management (former name is Campus Management) solution enables institution-wide collaboration across business processes and users, supporting more effective service,increasing efficiencies, and lowering
    total cost of ownership. Its global approach brings together experience and best business practices from different educational systems, educational levels, and cultures. By accommodating the diverse aspects of international academic programs an non-academic programs, the software helps institutions to be successful in a globally collaborating world. Its flexibility and scalability supports ongoing transformation,growth,and optimization of business processes.
    In other words SAP SLcM can serve different type of 'study' models and cope with their processes/demands. The SAP solution serves the entire Education & Research ecosystem. Below some examples:
    - K-12;
    - Public Universities;
    - Private Universities;
    - Medical Schools;
    - Business Schools;
    - Techning-intensive Universities;
    - Etc, etc.
    Your question regarding the Initial investments I cannot answer directly. If you send me an e-mail (rob(atsign)sap.com) I can get you in contact with my collegeaus who can help you out.
    Please do not hesitate to contact me if you have any other queries.
    Br,
    Rob

  • Campus manager 5.0.6 bug

    Hello,
    I'm hitting bug CSCtd49439 detailed below after i upgraded my campus manager to 5.0.6. the workaround didn't work in my case and i need the patch without opening a tac case, where can I find it???
    Regards
    Data Collection never completes, and UT acquisition  cannot run
    Symptom:
    Campus Manager Data Collection does  not stop. It is reported as always
    running in
    Topology Services.  Additionally, User Tracking acquisition does not run due
    to XML files 
    being written.
    Conditions:
    This will occur if  there are any standalone Access Points being managed by
    Campus
    Manager.  Other devices can also cause this (e.g. old 1200 series  switches).
    Workaround:
    Filter out standalone Access Points  and other affected devices from Campus
    Data Collection
    under Campus  Manager > Administration > Data Collection > Exclude Devices.
    A  patch is available by contacting TAC.

    "I understand I have to open a tac case to get it but the problem is that; being Cisco Gold Partners, my company has a limit on the numbers of tac cases to be opened and there are lots of patches and software that is only available through tac? can I unsertand why? IS this a Cisco Policy?"
    Yes, it is and this is an old discussion with Cisco and I stopped it sometimes in the past; The only argument for you might be - "it is the same for all Cisco partners...."
    It has some aspects, I am not sure if Cisco is aware about..
    See this situation:
    If you have an issue discussing it here on the forum e.g. with jclarke and it reveals to be a LMS bug and jclarke writes a patch for it, it is clear to open a TAC Service Request to get the patch (the patch is not tested yet and TAC needs to have the possibility to keep at least a statistical logging about the issues).
    But know the ridiculous part starts - the case will get accounted against your account because the bug ID yet exists. edit: Only  Bug IDs generated during the follow-up of a case won't get accounted. Only if a NEW Bug ID is generated during the follow-up of a Service Request will result in the fact that the SR is not accounted. So beside the fact that you have to deal with parts of LMS which are not working you receicve a kind of penaltiy for helping in making LMS functioning correct....
    Once, I stopped informing Cisco about the issues I have found within LMS because of this penalty, but when jclarke started in this forum it was worth again announcing them and discussing those things...- because there is real help and a prospective solution
    But I think it is somewhat embarrasing for Cisco to put an imposition on people/companies who found bugs instead of giving somekind of reward or only a short  "Thank you...."
    Nachricht geändert durch mermel

  • If we don't use SAP campus management

    Dear experts,
    We want to implement ECC and CRM in the Higher Education Industry. Our client has already a Student Management System (not SAP) and doesn't want to change it now.
    We want to use SAP for billing, instalment plans and debt management (- btw, not only for that). Which SAP modules should we use for that and which object should we configure if we don't use Campus Management? 
    Could we create a business agreement /contract in CRM with students courses as products? Or could we use service order?
    Thanks in advance for your feedback,
    Best regards
    Stephanie

    Stephanie,
    You could certainly do a standalone SAP student accounting implementation which interfaces with the legacy student system.  This approach has actually been done before at other insitutitions, including those that choose to implement Student Accounting prior to implementing the rest of Student Lifecycle Management.
    Student Accounting would handle all of the billing, collections, payments, installment plans, etc.  It is based on FI-CA (Contract Accounting).  The biggest question is whether tuition fees would be calculated in SAP or in the existing system.
    I would not see CRM as a necessary component at all for student accounting, but you might have other uses for it (such as recruitment).
    Michael

  • VLAN Port Assignment failed on Campus Manager 5.1

    Dear All,
    i deploying LMS 3.1  in my organization.
    I finalized the installation and  all looks fine BUT   when i try to assign a port to a different VLAN in Campus Manager (5.1)  i am getting the following error message.
    There were some errors during operation."
    Error occured moving port Gi1/8 in device 10.x.y.z  into vlan with index XY.
    Cause:An error occured while performing SNMP operation.
    Action:Examine and save the server log file and report the error to the product administrator for further action.
    VLAN Port Assignment failed
    any idea?
    here is simply the config  related to SNMP on my switch.
    snmp-server community XXXXXXXX
    snmp-server host 10.X.Y.Z version 2c XXXXXXXX
    snmp-server enable informs
    snmp-server enable traps 
    do i miss anything else?  any recommendation? Why i am getting that error message?
    Thank you for your support and asistance.
    Kind Regards,
    mico

    Hi Joe,
    thank you so much for your kind reply. I configured the snmp RW community string on the switch matching the credentials  on the LMS server but still getting the same error message when i try to assign ports no a different VLAN
    here is my commands for the switch:
    snmp-server community xxxxxx ro
    snmp-server community yyyyyy rw
    snmp-server host x.y.w.z version 2c yyyyyy
    snmp-server enable informs
    snmp-server enable traps
    and on the LMS server i set the values:
    snmp-server community xxxxxx ro
    snmp-server community yyyyyy rw

  • User Exit Triggered during Campus Management Student admission data created

    Hi Exports,
    This is jnana ranjan working as a campus management implementation project.
    Here we are impl student admission process workflow and i want trigger my event through user exit. I am new in user exit please guide me how to find user exit for CM and how to implement this. If you have abap code for similar requirment then please send me through my mailid: [email protected]
    Please help me this is urgent requirment for my University client.
    Advance thanks you.
    Regards,
    Jnana

    Hi,
    Can any one please let me know the user exit triggered during campus management student admission data creation and .
    Thanks ,
    Jnana

  • Creation of Infotype in Campus Management

    Hi Guy's,
    Please help me how to create the custom infotype in CAMPUS MANAGEMENT.
    Thanks and Regards,
    Laks

    Hi Narayana,
    Please send me Campus Management Documents.  My Mail-id is [email protected]
    Thanks and Regards,
    Bhavani.

  • Campus Management - BAPI

    Hi,
    I have installed a SAP ECC 6.0 system with Campus Management activation.
    I want to develop Web Dynpro Application used BAPI.
    Are there BAPI Object for Campus Management ?
    How can I activated the Campus Management BAPI ?
    Thanks for your help
    regards,
    Mathieu

    You should use txn "BAPI"
    1. Press "Filter" icon-button & select "All"
    2. You will find relevant ones in 4 sections
    a) Cross-Appl> SAP BusPart
    b) Fin Acctg> Contract Accts Recbl+Pybl
    c) Campus Mgmt
    d) Contract Acctg for PubSect
    3. Drill down each section above to see BAPI detials
    Good luck (people usually forget step 1)!
    (Please reward points if found useful!)
    Message was edited by: Mike Woodward

Maybe you are looking for